Files
lm-sensors/configs/Asus/P5E3.conf
T
Tele42 1398ef0201 configs: Bulk config recovery from archive.org (Part 1)
This is a bulk recovery of the sensor configs found at
https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations

The config sections themselves are unaltered, but I've selectively added
some, but not all of the extra info around them. Anywhere there's been
extra info added, it should be in comments at the top of the config,
followed by a double newline to indicate the separation. Attribution has
been retained where possible, but links to the mailing list are hosed,
so goto the above archive.org link to check if a config has extra origin
notes.

[groeck: reformatted description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-21 07:34:59 -08:00

60 lines
1.2 KiB
Plaintext

# Contributed by Alexey Torkhov
# Main difference with existing config is different coefficient in voltage
# formula and different input (in5 instead of in6) for +5V.
# This is for an Asus P5E3
chip "w83627dhg-*"
label in0 "VCore"
label in1 "+12V"
label in3 "+3.3V"
label in5 "+5V"
ignore in2
ignore in4
ignore in6
ignore in7
ignore in8
# +12V is in1 and +5V is in5
compute in1 @*(1+(60/10)), @/(1+(60/10))
compute in5 @*(1+(20/10)), @/(1+(20/10))
# 10% tolerance for 12V
set in1_min 12.0*0.9
set in1_max 12.0*1.1
# 5% for others
set in5_min 5.0*0.95
set in5_max 5.0*1.05
# Set the 3.3V
set in3_min 3.3*0.95
set in3_max 3.3*1.05
# Fans
label fan1 "Case Fan"
label fan2 "CPU Fan"
label fan3 "Aux Fan"
# ignore fan4
# ignore fan5
set fan1_min 600
set fan2_min 600
set fan3_min 600
set fan4_min 600
set fan5_min 600
# Temperatures
label temp1 "Sys Temp"
label temp2 "CPU Temp"
ignore temp3
set temp1_max 60
set temp1_max_hyst 55
set temp2_max 72
set temp2_max_hyst 67
set temp3_max 60
set temp3_max_hyst 55