mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-07 16:01:34 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
83 lines
2.2 KiB
Plaintext
83 lines
2.2 KiB
Plaintext
# lm_sensors 3 configuration file for the Asus TX97-E motherboard
|
|
# 2005-11-14, Jean Delvare <jdelvare@suse.de>
|
|
# Comments welcome!
|
|
|
|
chip "lm78-*"
|
|
|
|
### Voltages
|
|
|
|
# Vcore is monitored twice because this is a "dual plane" CPU
|
|
# (Intel Pentium 166 MMX).
|
|
label in0 "Vcore 1"
|
|
label in1 "Vcore 2"
|
|
label in2 "+3.3V"
|
|
label in3 "+5V"
|
|
label in4 "+12V"
|
|
label in5 "-12V"
|
|
label in6 "-5V"
|
|
|
|
compute in3 @*((6.8/10)+1), @/((6.8/10)+1)
|
|
compute in4 @*((28/10)+1), @/((28/10)+1)
|
|
compute in5 @*(-210/60.4), @/(-210/60.4)
|
|
compute in6 @*(-90.9/60.4), @/(-90.9/60.4)
|
|
|
|
# It looks like you can't trust VID readings when using a dual plane
|
|
# CPU (e.g. Intel Pentium MMX or AMD K6) on the TX97-E. It will report
|
|
# the "equivalent" (jumper-wise) single plane voltage. At least this is
|
|
# what I can observe since I use a Pentium 166 MMX, which uses 2.8V
|
|
# dual plane, and VID reads 3.4V, which is the same jumper combination
|
|
# for single plane. This also seems to suggest that the VID value comes
|
|
# from the motherboard and not the CPU itself as is the case with later
|
|
# models.
|
|
ignore cpu0_vid
|
|
|
|
set in0_min 2.7
|
|
set in0_max 2.9
|
|
set in1_min 2.7
|
|
set in1_max 2.9
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in3_min 5.0 * 0.95
|
|
set in3_max 5.0 * 1.05
|
|
set in4_min 12 * 0.95
|
|
set in4_max 12 * 1.05
|
|
set in5_min -12 * 0.95
|
|
set in5_max -12 * 1.05
|
|
set in6_min -5 * 0.95
|
|
set in6_max -5 * 1.05
|
|
|
|
### Fans
|
|
|
|
label fan1 "Case Fan"
|
|
label fan2 "CPU Fan"
|
|
label fan3 "P/S Fan"
|
|
|
|
# I only have a CPU fan on this system. Note that the power supply fan
|
|
# header surprisingly did not seem to be powered anyway, so I couldn't
|
|
# have used it if I had wanted to.
|
|
ignore fan1
|
|
ignore fan3
|
|
|
|
set fan2_div 2
|
|
set fan2_min 4800
|
|
|
|
### Temperatures
|
|
|
|
label temp1 "M/B Temp"
|
|
|
|
set temp1_max 40
|
|
set temp1_max_hyst 38
|
|
|
|
chip "lm75-*"
|
|
|
|
label temp1 "CPU Temp"
|
|
|
|
# Contrary to most motherboards, the Asus TX97-E needs scaling,
|
|
# supposedly to compensate for the thermistor-to-CPU distance. The
|
|
# formula doesn't make much physical sense, but will give the same
|
|
# value as the BIOS displays.
|
|
compute temp1 @*2, @/2
|
|
|
|
set temp1_max 80
|
|
set temp1_max_hyst 75
|