mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-26 12:24:33 +00:00
123 lines
3.3 KiB
Plaintext
123 lines
3.3 KiB
Plaintext
# Configuration file contributed by Lee Marriott.
|
|
|
|
|
|
# libsensors configuration file
|
|
# -----------------------------
|
|
#
|
|
# This is a first attempt at a custom configuration file for the Biostar N68S+.
|
|
# This custom configuration file should be copied to /etc/sensors.d/Biostar-N68S+.conf.
|
|
#
|
|
# Custom configuration files for some specific mainboards can be found at
|
|
# https://github.com/lm-sensors/lm-sensors/tree/master/configs
|
|
|
|
# READ THE MAN PAGE DOCUMENTATION OF 'sensors.conf' FOR MORE
|
|
# COMPLETE INFORMATION. ie:
|
|
|
|
# man sensors.conf
|
|
|
|
# Regarding the Biostar N68S+ motherboard: This motherboard supports
|
|
# both manual overclocking by individual settings and preconfigured
|
|
# overclocking using predefined sets of overclock settings.
|
|
|
|
chip "it8716-*"
|
|
|
|
# All labels set to match Biostar N68S+ BIOS displayed labels. See
|
|
# the 'PC Health' screen in the BIOS.
|
|
|
|
# Voltage settings
|
|
|
|
label in0 " Vcore"
|
|
label in1 "Chipset"
|
|
ignore in2 # +3.3 V not in BIOS
|
|
label in3 " +5 V" # VCC
|
|
label in4 " +12 V"
|
|
label in5 " DDR"
|
|
label in6 " HT"
|
|
label in7 " 5VSB"
|
|
label in8 " Vbat"
|
|
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
compute in4 ((30/10)+1)*@ , @/((30/10)+1)
|
|
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
|
|
ignore cpu0_vid
|
|
|
|
# Other than +3.3, +5.0 and +12.0 voltages (here set plus/minus 10%), the
|
|
# indicated min/max voltages are a guess based on present measurements
|
|
# and similar to those on my Asus m/b.
|
|
#
|
|
|
|
set in0_min 0.80
|
|
set in0_max 1.80
|
|
set in1_min 1.1
|
|
set in1_max 1.76
|
|
# set in2_min 3.3 * 0.90
|
|
# set in2_max 3.3 * 1.10
|
|
set in3_min 5.0 * 0.90
|
|
set in3_max 5.0 * 1.10
|
|
set in4_min 12.0 * 0.90
|
|
set in4_max 12.0 * 1.10
|
|
set in5_min 1.60
|
|
set in5_max 2.20
|
|
set in6_min 0.95
|
|
set in6_max 1.4
|
|
set in7_min 5.0 * 0.90
|
|
set in7_max 5.0 * 1.10
|
|
|
|
# Fan settings
|
|
|
|
label fan1 "CPU fan"
|
|
label fan2 "Sys1fan"
|
|
label fan3 " NB fan"
|
|
|
|
# Ignore fans you don't have
|
|
ignore fan3
|
|
|
|
#
|
|
# The Biostart N68S+ is based upon the nVidia GeForce 7025/nForce 630a
|
|
# chipset and comes with active (fan based) cooling.
|
|
|
|
# Biostar N68S+ can allow 0 rpm for the CPU fan when in SMART
|
|
# fan control mode. Set min speeds as applicable for your system.
|
|
|
|
# set fan1_min 1000
|
|
set fan1_min 0
|
|
set fan2_min 1000
|
|
# set fan3_min 5600
|
|
|
|
# Temperature sensor settings
|
|
|
|
label temp1 "CPU Tmp"
|
|
label temp2 "M/B Tmp"
|
|
label temp3 "NB "
|
|
|
|
# BioStar N68S+ BIOS doesn't use 'temp2' and 'temp3'.
|
|
|
|
ignore temp2
|
|
ignore temp3
|
|
|
|
# Only set tempX_type if you have PC Health [disabled]
|
|
# in your BIOS???? Generally, the kernel {lmsensors} will
|
|
# correctly detect individual temperature sensor type and
|
|
# set values accordingly.
|
|
# 2 = thermistor; 3 = thermal diode; 0 = unused
|
|
|
|
# set temp1_type 2
|
|
# set temp2_type 2
|
|
# set temp3_type 3
|
|
|
|
# Set your temparature max values. Warning: If your values here
|
|
# are set higher than the values set in your BIOS, then you may
|
|
# shutdown at a lower temperature than you think. It's probably
|
|
# best to assume that shutdown will occur at the lowest setting
|
|
# whenever the value here and the BIOS are different.
|
|
|
|
set temp1_max 50
|
|
set temp1_min 10
|
|
# set temp2_max 50
|
|
# set temp2_min 10
|
|
|
|
# The other possibility is that a value set here will always
|
|
# override the BIOS. You may or may not want that behavior.
|
|
|