mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-30 13:00:30 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
83 lines
2.1 KiB
Plaintext
83 lines
2.1 KiB
Plaintext
# lm_sensors configuration file for DFI Itox EL620-C industrial motherboard
|
|
# 2012-06-20, Paul Crawford <psc@sat.dundee.ac.uk>
|
|
# Based on feedback from DFI and the schematic sheet 15 of 24, revision A1, 28 October 2011
|
|
|
|
# Winbond W83627DHG configuration for EL620-C
|
|
chip "w83627dhg-*"
|
|
|
|
label in0 "VCore"
|
|
label in1 "+5V"
|
|
label in2 "AVCC"
|
|
label in3 "+3.3V"
|
|
label in4 "+1.1V"
|
|
label in5 "Vmemory"
|
|
label in6 "+12V"
|
|
label in7 "Vstandby"
|
|
label in8 "VBAT"
|
|
|
|
# +12V and +5V use dividers from schematic
|
|
compute in1 @*(1+(30.1/10)), @/(1+(30.1/10))
|
|
compute in6 @*(1+(60.4/10)), @/(1+(60.4/10))
|
|
|
|
# We need to set voltage limits.
|
|
set in0_min 0.80
|
|
set in0_max 1.55
|
|
|
|
set in1_min 5.0*0.95
|
|
set in1_max 5.0*1.05
|
|
|
|
set in2_min 3.3*0.95
|
|
set in2_max 3.3*1.05
|
|
|
|
set in3_min 3.3*0.95
|
|
set in3_max 3.3*1.05
|
|
|
|
set in4_min 1.1*0.95
|
|
set in4_max 1.1*1.05
|
|
|
|
# DDR3 voltage range
|
|
set in5_min 1.30
|
|
set in5_max 1.58
|
|
|
|
# Original ATX spec was +/-10% on +12V, but recent ATX12V version 2.2 spec is 5% (still 10% on unmonitored -12V)
|
|
set in6_min 12.0*0.95
|
|
set in6_max 12.0*1.05
|
|
|
|
set in7_min 3.3*0.95
|
|
set in7_max 3.3*1.05
|
|
|
|
# Battery voltage, assume CR2032 Lithium-Manganese Dioxide Battery.
|
|
# This actually seems not to be needed as hard-coded?
|
|
set in8_min 2.7
|
|
set in8_max 3.3
|
|
|
|
# Fans
|
|
label fan1 "System Fan"
|
|
label fan2 "CPU Fan"
|
|
label fan3 "2nd Fan"
|
|
ignore fan4
|
|
ignore fan5
|
|
|
|
# Fan minimums, disable fan1 & fan3 as a case fan is not always connected
|
|
set fan1_min 0
|
|
set fan2_min 500
|
|
set fan3_min 0
|
|
|
|
# Temperatures. Can we assume temp2 limit for CPU is set by BIOS?
|
|
|
|
label temp1 "System Temp"
|
|
label temp2 "CPU Temp"
|
|
label temp3 "NB Temp"
|
|
|
|
set temp1_max 65
|
|
set temp1_max_hyst 55
|
|
|
|
set temp3_max 65
|
|
set temp3_max_hyst 55
|
|
|
|
# Not sure what this is, always reported 0.000 and the VID0-VID7 pins are not connected on schematic.
|
|
ignore cpu0_vid
|
|
|
|
# From the Intel CPU itself? Seems not to need any special configuration.
|
|
#chip "coretemp-*"
|