Files
lm-sensors/configs/Foxconn/A7GM-S_2.0.conf
T
Tele42 1398ef0201 configs: Bulk config recovery from archive.org (Part 1)
This is a bulk recovery of the sensor configs found at
https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations

The config sections themselves are unaltered, but I've selectively added
some, but not all of the extra info around them. Anywhere there's been
extra info added, it should be in comments at the top of the config,
followed by a double newline to indicate the separation. Attribution has
been retained where possible, but links to the mailing list are hosed,
so goto the above archive.org link to check if a config has extra origin
notes.

[groeck: reformatted description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-21 07:34:59 -08:00

42 lines
972 B
Plaintext

# Configuration file contributed by Göran Uddeborg.
chip "it8716-*"
label in0 "CPU core"
label in1 "DRAM voltage"
label in2 "+3.3V"
# +5V
label in4 "+12V"
label in5 "+1.1V"
ignore in6
ignore in7
label in8 Vbat
compute in3 @ * (1 + 6.8 / 10), @ / (1 + 6.8 / 10)
compute in4 @ * 4, @ / 4
label fan1 "CPU fan"
label fan2 "Chassis fan"
ignore fan3
label temp1 "CPU temp"
label temp2 "System temp"
ignore temp3
# Min and max for Athlon II X2 245e
set in0_min 0.875
set in0_max 1.4
# JEDEC standard for DDR2
set in1_min 1.7
set in1_max 1.9
# 5 % tolerance on the remaining measurements
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
set in4_min 12.0 * 0.95
set in4_max 12.0 * 1.05
set in5_min 1.1 * 0.95
set in5_max 1.1 * 1.05