mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-10 16:30:50 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
69 lines
1.7 KiB
Plaintext
69 lines
1.7 KiB
Plaintext
# Configuration file for the Gigabyte GA-770TA-UD3.
|
|
# Submitted by Ancoron Luciferis
|
|
|
|
|
|
# libsensors3 configuration file for the Gigabyte GA-770TA-UD3
|
|
|
|
chip "it8720-isa-*"
|
|
### Voltages
|
|
|
|
# in5 is mysterious.
|
|
|
|
label in0 "Vcore"
|
|
label in1 "Vdram" # "DDR3" in BIOS
|
|
label in2 "+3.3V"
|
|
label in3 "+5V" # Not in BIOS
|
|
label in4 "+12V"
|
|
ignore in5
|
|
ignore in6
|
|
label in7 "5VSB" # Not in BIOS
|
|
label in8 "Vbat" # Not in BIOS
|
|
ignore cpu0_vid
|
|
|
|
# Vcore, Vdram, +3.3V and Vbat are connected directly, so no compute
|
|
# line is needed for these. +5V and 5VSB are internal so we use the
|
|
# standard scaling factor. Scaling for +12V is apparently not standard,
|
|
# factor 3.963 is guessed from BIOS and EasyTune values (3.943 was
|
|
# another candidate.)
|
|
compute in3 @ * (6.8/10+1), @ / (6.8/10+1)
|
|
compute in4 @ * 3.963, @ / 3.963
|
|
compute in7 @ * (6.8/10+1), @ / (6.8/10+1)
|
|
|
|
# The BIOS won't set any limit for voltages.
|
|
|
|
set in0_min 0.825 * 0.95
|
|
set in0_max 1.425 * 1.05
|
|
set in1_min 1.5 * 0.95
|
|
set in1_max 1.5 * 1.05
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in3_min 5 * 0.95
|
|
set in3_max 5 * 1.05
|
|
set in4_min 12 * 0.95
|
|
set in4_max 12 * 1.05
|
|
set in7_min 5 * 0.95
|
|
set in7_max 5 * 1.05
|
|
|
|
### Temperatures
|
|
|
|
# The BIOS only shows 2 temperature values:
|
|
# - temp1: the system temprature
|
|
# - temp2: the CPU temperature
|
|
|
|
label temp1 "SYS Temp"
|
|
label temp2 "CPU Casing Temp"
|
|
ignore temp3
|
|
|
|
### Fans
|
|
|
|
label fan1 "CPU Fan"
|
|
ignore fan2
|
|
ignore fan3
|
|
# ignore fan4 # doesn't exist on GA-770TA-UD3
|
|
ignore fan5
|
|
|
|
# Adjust for your own fans
|
|
set fan1_min 1000
|
|
# set fan3_min 3000
|
|
|