mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-09 16:21:51 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
64 lines
1.3 KiB
Plaintext
64 lines
1.3 KiB
Plaintext
# Configuration file contributed by Ian Pangilinan.
|
|
|
|
|
|
### Sensors configuration for Gigabyte GA-945GCM-S2L motherboard
|
|
### 2014-02-21, ianp <snailbox88-dev -at- yahoo -dot- com>
|
|
### Thanks to Jean Delvare
|
|
### Comments are welcome.
|
|
|
|
|
|
chip "it8718-*"
|
|
|
|
### Voltages
|
|
|
|
label in0 "Vcore"
|
|
label in1 "Vram" # "DDR18V" in BIOS
|
|
label in2 "+3.3V"
|
|
ignore in3 # no +5V monitor, not used
|
|
label in4 "+12V"
|
|
ignore in5 # these inputs
|
|
ignore in6 # are not used
|
|
ignore in7 # by the board
|
|
|
|
### Scale +12V.
|
|
|
|
compute in4 @*3.9633, @/3.9633
|
|
|
|
### Set in0 according to CPU VID voltage range.
|
|
### Set min and max values according to preference.
|
|
|
|
set in0_min 0.850
|
|
set in0_max 1.362
|
|
set in1_min 1.8 * 0.95
|
|
set in1_max 1.8 * 1.05
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in4_min 12 * 0.95
|
|
set in4_max 12 * 1.05
|
|
|
|
### Temperatures
|
|
|
|
### Ignore temp1 and temp2 as those aren't used.
|
|
|
|
ignore temp1
|
|
ignore temp2
|
|
label temp3 "CPU Temp"
|
|
|
|
### Set according to CPU.
|
|
|
|
set temp3_min 10
|
|
set temp3_max 60
|
|
|
|
### Fans
|
|
|
|
### Ignore fan3 as it isn't used.
|
|
|
|
label fan1 "CPU Fan"
|
|
label fan2 "CHA Fan"
|
|
ignore fan3
|
|
|
|
### Set according to preference.
|
|
|
|
set fan1_min 900
|
|
set fan2_min 0
|