mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-09 16:21:51 +00:00
Maciej S. Szmigiero
520e467b67
Input routing and scaling for this board was read from its schematic, verified on a real specimen. This config is likely also valid for other members of GA-F2A88XM-x family, as differences between them seem pretty minor. It might also be valid for GA-F2A85XM-HD3 board considering that GA-F2A88XM-HD3 schematic has the former board name as title in many places. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
53 lines
1.1 KiB
Plaintext
53 lines
1.1 KiB
Plaintext
# contributed by Maciej S. Szmigiero <mail@maciej.szmigiero.name>
|
|
#
|
|
# input routing and scaling read from board schematic
|
|
#
|
|
# likely valid also for other boards in GA-F2A88XM-x family
|
|
|
|
chip "it8620-*"
|
|
label in0 "CPU Vcore"
|
|
label in1 "DRAM Voltage"
|
|
|
|
label in2 "+12V"
|
|
compute in2 ((75 / 15) + 1) * @, @ / ((75 / 15) + 1)
|
|
set in2_min 12 * 0.95
|
|
set in2_max 12 * 1.05
|
|
|
|
label in3 "+5V"
|
|
compute in3 ((15 / 10) + 1) * @, @ / ((15 / 10) + 1)
|
|
set in3_min 5 * 0.95
|
|
set in3_max 5 * 1.05
|
|
|
|
label in4 "+3.3V"
|
|
compute in4 ((649 / 1000) + 1) * @, @ / ((649 / 1000) + 1)
|
|
set in4_min 3.3 * 0.95
|
|
set in4_max 3.3 * 1.05
|
|
|
|
# likely left unconnected
|
|
ignore in5
|
|
ignore in6
|
|
|
|
set in7_min 3.3 * 0.95
|
|
set in7_max 3.3 * 1.05
|
|
|
|
label fan1 "CPU Fan"
|
|
label fan2 "System Fan"
|
|
ignore fan3
|
|
ignore fan4
|
|
ignore fan5
|
|
|
|
label temp1 "System Temp"
|
|
|
|
# likely left unconnected
|
|
# no sensor configured for this input in the chip
|
|
ignore temp2
|
|
|
|
# the same (virtual) temperature as reported by k10temp
|
|
# just offset by 13°C (from temp3_offset) for fan control
|
|
ignore temp3
|
|
|
|
# stuck at 45°C
|
|
ignore temp4
|
|
ignore temp5
|
|
ignore temp6
|