mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-08 16:11:26 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
56 lines
1.3 KiB
Plaintext
56 lines
1.3 KiB
Plaintext
# Provided by Ivan Bulatovic, who says it might possibly work on other
|
|
# P65/H61/H67 Gigabyte boards too.
|
|
|
|
|
|
chip "it8728-*"
|
|
|
|
label in0 "Vtt"
|
|
set in0_min 1.02 # I'm liberal with these, 2-3% tops
|
|
set in0_max 1.08 # after that, cpu gets very unstable
|
|
|
|
ignore in1
|
|
# label in1 "+3.3V"
|
|
# set in1_min 3.14 # Some boards including GA-H67MA-UD2H
|
|
# set in1_max 3.47 # don't have 3.3V voltage reading
|
|
|
|
label in2 "+12V"
|
|
set in2_min 11.40 # according to ATX 12V PSU design guide
|
|
set in2_max 12.60 #
|
|
|
|
ignore in3 # reports 3VSB
|
|
|
|
ignore in4 # really don't know what's this one for
|
|
|
|
label in5 "Vcore"
|
|
set in5_min 0.65
|
|
set in5_max 1.50 # heavy o/c
|
|
|
|
label in6 "Vdram"
|
|
set in6_min 1.45 # adjust these, 1.35 for LVDDR3
|
|
set in6_max 1.55 # 1.5V is recommended, 1.65 tops
|
|
|
|
label in7 "3VSB"
|
|
set in7_min 3.14
|
|
set in7_max 3.47
|
|
|
|
label in8 "Vbat"
|
|
|
|
label fan1 "CPU fan"
|
|
set fan1_min 700
|
|
|
|
label fan2 "System fan"
|
|
set fan2_min 0
|
|
|
|
label temp1 "PCH temp"
|
|
set temp1_min 10
|
|
set temp1_max 60 # seen those rising to 55C
|
|
|
|
label temp2 "CPU temp"
|
|
set temp2_min 10
|
|
set temp2_max 85
|
|
|
|
ignore temp3
|
|
|
|
compute in1 1.649*@,@/1.649 # multipliers provided by
|
|
compute in2 4.090*@,@/4.090 # Martin Malik author of hwinfo
|