mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-06 15:51:34 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
64 lines
1.8 KiB
Plaintext
64 lines
1.8 KiB
Plaintext
# Configuration contributed by Artem S. Tashkinov.
|
|
|
|
|
|
# lm_sensors configuration for Gigabyte M61P-S3 AM2+ motherboard
|
|
|
|
chip "it8716-*"
|
|
|
|
# Voltages
|
|
|
|
label in0 "VCore" # CPU Core Voltage
|
|
label in1 "VDDR" # DDR2 1.8V
|
|
label in2 "+3.3V" # VCC3
|
|
label in3 "+5V" # VCC
|
|
label in4 "+12V"
|
|
label in5 "-12V" # Not in the BIOS, maybe not really -12V
|
|
label in6 "-5V" # Not in the BIOS, maybe not really -5V
|
|
label in7 "5VSB" # VCCH
|
|
label in8 "VBat"
|
|
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
compute in4 ((30/10)+1)*@ , @/((30/10)+1)
|
|
compute in5 -(30/10+1)*@, -@/(30/10+1)
|
|
compute in6 (1+120/56)*@ - 4.096*120/56 , (@ + 4.096*120/56)/(1+120/56)
|
|
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
|
|
# Not setting in0 min/max, because different AMD CPUs have
|
|
# different voltages, besides with C'n'Q enabled this voltage
|
|
# can fluctuate a lot
|
|
# set in0_min vid * 0.95
|
|
# set in0_max vid * 1.05
|
|
set in1_min 1.8 * 0.95
|
|
set in1_max 1.8 * 1.05
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in3_min 5 * 0.95
|
|
set in3_max 5 * 1.05
|
|
set in4_min 12 * 0.95
|
|
set in4_max 12 * 1.05
|
|
set in5_max -12 * 0.95
|
|
set in5_min -12 * 1.05
|
|
set in6_max -5 * 0.95
|
|
set in6_min -5 * 1.05
|
|
set in7_min 5 * 0.95
|
|
set in7_max 5 * 1.05
|
|
# The chip does not support in8 min/max
|
|
|
|
# Temperatures
|
|
|
|
label temp1 "M/B Temp"
|
|
label temp2 "CPU Temp"
|
|
label temp3 "M/B Temp"
|
|
|
|
set temp2_max 60
|
|
|
|
# Fans
|
|
|
|
label fan1 "CPU Fan"
|
|
label fan2 "Case Fan"
|
|
ignore fan3 # This motherboard doesn't have the second system fan
|
|
|
|
# My fans can stop if the temperature is OK, adjust for your situation
|
|
# set fan1_min 2000
|
|
# set fan2_min 2000
|