mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-08 16:11:26 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
79 lines
1.8 KiB
Plaintext
79 lines
1.8 KiB
Plaintext
# Configuration file contributed by Mathias Gerber.
|
|
|
|
|
|
chip "acpitz-virtual-0"
|
|
ignore temp1 # stays always at 27.8 degrees C
|
|
ignore temp2 # dito
|
|
|
|
chip "it8728-*"
|
|
|
|
label in0 "CPU Vtt"
|
|
set in0_min 1.02 # I'm liberal with these, 2-3% tops
|
|
set in0_max 1.08 # after that, cpu gets very unstable
|
|
|
|
label in1 "+3.3V"
|
|
set in1_min 3.3 * 0.95 # Some boards including GA-H67MA-UD2H
|
|
set in1_max 3.3 * 1.05 # don't have 3.3V voltage reading
|
|
compute in1 1.649*@,@/1.649 # multipliers provided by Martin Malik author of hwinfo
|
|
|
|
label in2 "+12V"
|
|
set in2_min 12 * 0.95
|
|
set in2_max 12 * 1.05
|
|
compute in2 @ * (72/12), @ / (72/12) #mg,15.05.13
|
|
|
|
label in3 "+5V"
|
|
set in3_min 5 * 0.95
|
|
set in3_max 5 * 1.05
|
|
compute in3 2.5*@,@/2.5
|
|
|
|
label in4 "Vaxg" # Voltage used by the video controller embedded inside the CPU
|
|
set in4_min 0.4
|
|
set in4_max 1.4
|
|
|
|
label in5 "Vcore"
|
|
set in5_min 0.825 * 0.95
|
|
set in5_max 1.425 * 1.05
|
|
|
|
label in6 "Vdram"
|
|
set in6_min 1.5 * 0.95 # adjust these, 1.35 for LVDDR3
|
|
set in6_max 1.5 * 1.05 # 1.5V is recommended, 1.65 tops
|
|
|
|
# 3VSB
|
|
set in7_min 3.3 * 0.95
|
|
set in7_max 3.3 * 1.05
|
|
|
|
# Vbat
|
|
set in8_min 3.0 * 0.90
|
|
set in8_max 3.0 * 1.10
|
|
|
|
### fan
|
|
|
|
label fan1 "CPU fan"
|
|
set fan1_min 700
|
|
|
|
label fan2 "Sys1 fan"
|
|
set fan2_min 200
|
|
|
|
label fan3 "Sys2 fan"
|
|
set fan3_min 200
|
|
|
|
label fan4 "Sys3 fan"
|
|
set fan4_min 200
|
|
|
|
label fan5 "Sys4 fan"
|
|
set fan5_min 200
|
|
|
|
### temperatures
|
|
|
|
label temp1 "System temp" # tops at 33 degrees C
|
|
set temp1_min 10
|
|
set temp1_max 60
|
|
|
|
ignore temp2 # shows always 25 degrees C
|
|
set temp2_min 0
|
|
set temp2_max 60
|
|
|
|
label temp3 "CPU temp"
|
|
set temp3_min 10
|
|
set temp3_max 85
|