mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-26 12:24:33 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
46 lines
1.1 KiB
Plaintext
46 lines
1.1 KiB
Plaintext
# Configuration file contributed by Eric Le Bras.
|
|
|
|
|
|
# Configuration file for Intel D201GLY2 motherboard
|
|
# Hardware monitor subsystem controlled by Winbond W83627DHG-B I/O controller.
|
|
# Created using information from BIOS and board documentation.
|
|
|
|
chip "w83627dhg-*"
|
|
|
|
label in1 "+12V"
|
|
label in4 "+5V"
|
|
label in6 "+1.5V"
|
|
|
|
# in5 is obviously unconnected, so ignore it
|
|
ignore in5
|
|
|
|
compute in1 @*(55/8), @/(55/8)
|
|
compute in4 @*(1+18/10), @/(1+18/10)
|
|
|
|
set in1_min 12.0 * 0.95
|
|
set in1_max 12.0 * 1.05
|
|
set in4_min 5.0 * 0.95
|
|
set in4_max 5.0 * 1.05
|
|
set in6_min 1.5 * 0.90
|
|
set in6_max 1.5 * 1.10
|
|
|
|
label fan1 "Chassis fan"
|
|
label fan2 "CPU fan"
|
|
|
|
# By default the D201GLY2 has a passive heatsink. If the optional active
|
|
# heatsink is present, then one of the following lines is to be commented out
|
|
# (very likely fan2, though not tried).
|
|
ignore fan2
|
|
ignore fan3
|
|
ignore fan4
|
|
|
|
label temp1 "Sys temp"
|
|
label temp2 "CPU temp"
|
|
ignore temp3
|
|
|
|
set temp1_max 50
|
|
set temp1_max_hyst 48
|
|
|
|
ignore cpu0_vid
|
|
ignore intrusion0
|