mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-26 12:24:33 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
96 lines
2.1 KiB
Plaintext
96 lines
2.1 KiB
Plaintext
# Configuration file contributed by Arseny Klimovsky.
|
|
|
|
|
|
# Created for board DH67BL using information from Intel Desktop Utilities and BIOS
|
|
# "FRONT" and "REAR" fan labels correspond to the motherboard
|
|
# headers, but not necessarily the actual fan locations.
|
|
|
|
chip "nct6775-isa-0290"
|
|
|
|
# Fans
|
|
label fan1 "Rear fan"
|
|
set fan1_min 250 # From IDU
|
|
|
|
label fan2 "CPU fan"
|
|
set fan2_min 250 # From IDU
|
|
|
|
label fan3 "Front fan"
|
|
set fan3_min 250 # From IDU
|
|
|
|
# There is no fan4 on the board
|
|
ignore fan4
|
|
|
|
# Voltages
|
|
|
|
# Processor Vcc
|
|
label in0 "Vcore"
|
|
set in0_min 0.6 # From IDU
|
|
set in0_max 1.6 # From IDU
|
|
|
|
# This should be "12 Volts", but computations are strange
|
|
label in1 "+12V"
|
|
compute in1 11*@, @/11
|
|
set in1_min 11.1 # From IDU
|
|
set in1_max 12.9 # From IDU
|
|
|
|
# AVCC(?) - Not shown in BIOS or IDU
|
|
label in2 "AVCC"
|
|
set in2_min 3.0 # same as +3.3V
|
|
set in2_max 3.6 # same as +3.3V
|
|
|
|
# +3.3 Volts
|
|
label in3 "+3.3V"
|
|
set in3_min 3.0 # from IDU
|
|
set in3_max 3.6 # from IDU
|
|
|
|
# +5 Volts
|
|
label in4 "+5V"
|
|
compute in4 5*@, @/5
|
|
set in4_min 4.6 # from IDU
|
|
set in4_max 5.4 # from IDU
|
|
|
|
# Memory Vcc ("SDRAM Vcc" in IDU)
|
|
label in5 "MemV"
|
|
compute in5 1.5*@, @/1.5
|
|
set in5_min 0.4 # from IDU
|
|
set in5_max 2.0 # from IDU
|
|
|
|
# PCH Vcc
|
|
label in6 "PCHV"
|
|
set in6_min 0.6 # from IDU
|
|
set in6_max 1.6 # from IDU
|
|
|
|
# +3.3 Volt Standby
|
|
label in7 "3VSB"
|
|
set in7_min 3.0 # from IDU
|
|
set in7_max 3.6 # from IDU
|
|
|
|
# VBAT(?) - Not shown in BIOS or IDU
|
|
label in8 "Vbat"
|
|
|
|
# It shows +2.050 V, seems to be not used
|
|
ignore cpu0_vid
|
|
|
|
# Temperatures
|
|
|
|
# Labeled as "SYSTIN"
|
|
# Guess!
|
|
label temp1 "VR temp"
|
|
set temp1_max 90 # From IDU
|
|
set temp1_max_hyst 75 # From IDU
|
|
# Labeled as "CPUTIN"
|
|
label temp2 "CPU temp"
|
|
set temp2_max 93 # From IDU
|
|
set temp2_max_hyst 75 # From IDU
|
|
# Labeled as "PECI Agent 0"
|
|
# Guess!
|
|
label temp3 "Memory DIMM temp"
|
|
set temp3_max 90 # From IDU
|
|
set temp3_max_hyst 75 # From IDU
|
|
# Labeled as "PCH_CHIP_TEMP"
|
|
label temp4 "PCH temp"
|
|
|
|
# Labeled as "PECI Agent 1"
|
|
# Not used
|
|
ignore temp8
|