mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-29 12:50:43 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
59 lines
1.4 KiB
Plaintext
59 lines
1.4 KiB
Plaintext
# Configuration file contributed by Bryan Guidroz.
|
|
|
|
|
|
chip "f71882fg-isa-0a10"
|
|
|
|
# Ignore - Voltage
|
|
# The F71882FG uses an 8-bit, 8 mV LSB ADC for voltage monitoring.
|
|
# This means that it can measure up to 2.04 V directly. This is the value
|
|
# of in2, in3 and in6 on the MSI MS-9832, which means these inputs
|
|
# are saturated. This means these inputs are unused.
|
|
|
|
ignore in2
|
|
ignore in3
|
|
ignore in6
|
|
|
|
# Ignore - Fans
|
|
# The MSI MS-9832 uses fan1 (CPU Fan) and fan2 (System Fan).
|
|
# This means other fans are unused.
|
|
|
|
ignore fan3
|
|
ignore fan4
|
|
|
|
# Ignore - Temps
|
|
# The MSI MS-9832 uses temp1 (CPU temp) and temp3 (System temp).
|
|
# This means temp2 is unused.
|
|
|
|
ignore temp2
|
|
|
|
# Other - Voltages
|
|
# in0 (+3.3v), in7 (3VSB), and in8 (Vbat) are internally monitored voltages
|
|
# with internal dividers. This means the values are properly set and do not
|
|
# need to be defined in this configuration as they should be reported properly.
|
|
|
|
# Voltages
|
|
label in1 "Vcore"
|
|
label in4 "+5V"
|
|
label in5 "+12V"
|
|
|
|
compute in4 @*(1+200/47), @/(1+200/47)
|
|
compute in5 @*(1+200/20), @/(1+200/20)
|
|
|
|
set in1_max 1.1625 * 1.05
|
|
|
|
# Fans
|
|
label fan1 "CPU Fan"
|
|
label fan2 "Sys Fan"
|
|
|
|
set fan1_min 2100
|
|
set fan2_min 1400
|
|
|
|
# Temperatures
|
|
label temp1 "CPU Temp"
|
|
label temp3 "Sys Temp"
|
|
|
|
set temp1_max 60
|
|
set temp1_max_hyst 58
|
|
set temp3_max 50
|
|
set temp3_max_hyst 48
|