mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-09 16:21:51 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
59 lines
1.7 KiB
Plaintext
59 lines
1.7 KiB
Plaintext
# Sasha Alexandr - grapefruitgirl at linuxmail dot org
|
|
# Sept 2007 - lm_sensors 2.10.4
|
|
# Platform: MS-7350-010 P6N-SLI-FI mfg-date: 0707
|
|
# Chipset: nVidia nforce2 650i/430i SLI
|
|
# CPU: Intel CORE2 E2160 1.8 Ghz
|
|
# BIOS: AMIBIOS v2.3
|
|
#
|
|
# Configuration for Fintek F71882FG Super-I/O device & coretemp driver for CORE2 CPU temps:
|
|
|
|
chip "f71882fg-isa-0a00"
|
|
|
|
# NOTE: Fans 1 and 3 are switched around (somewhere).
|
|
label fan1 "CPU Cooler"
|
|
label fan2 "SysFan2: Rear Case"
|
|
label fan3 "SysFan1: some device"
|
|
label fan4 "SysFan3: some device"
|
|
|
|
# NOTE: Set statements for fans & volts give an 'Unknown Feature' error currently. This should be fixed sometime.
|
|
# The fans report exact same as BIOS; no computing needed.
|
|
# Header labeled 'Sysfan3' on board doesn't seem to report RPM.
|
|
|
|
label temp1 "CPU Temp"
|
|
label temp2 "System Temp"
|
|
label temp3 "128 ignore"
|
|
|
|
# NOTE: temp1 reports 5'C less than BIOS so I add 5'C to it.
|
|
compute temp1 (@ + 5), (@ - 5)
|
|
ignore temp3
|
|
|
|
# Voltages:
|
|
label in0 "3.3V in0"
|
|
label in1 "CPU V-Core in1"
|
|
label in2 "+5V StBy in2"
|
|
label in3 "V-Dimm in3"
|
|
label in4 "+5V in4"
|
|
label in5 "+12V in5"
|
|
label in6 "0.888 ignore"
|
|
label in7 "3.3 V StBy in7"
|
|
label in8 "3V Battery in8"
|
|
|
|
compute in0 (@ * 2.00) ,(@ / 2.00)
|
|
# compute in1 (no computing necessary)
|
|
compute in2 (@ * 5.25) ,(@ / 5.25)
|
|
compute in3 (@ * 2.50) ,(@ / 2.50)
|
|
# NOTE: I add 0.005 to in4 so it reads EXACTLY as BIOS reads.
|
|
compute in4 (0.005 + @ * 5.25) ,(0.005 - @ / 5.25)
|
|
compute in5 (@ * 11.00),(@ / 11.00)
|
|
ignore in6
|
|
compute in7 (@ * 2.00) ,(@ / 2.00)
|
|
compute in8 (@ * 2.00) ,(@ / 2.00)
|
|
|
|
chip "coretemp-isa-0000"
|
|
label temp1 "Core 0 Temp"
|
|
|
|
chip "coretemp-isa-0001"
|
|
label temp1 "Core 1 Temp"
|
|
|
|
# EOF
|