Files
lm-sensors/configs/MSI/X58-Pro-E.conf
T
Tele42 7547870646 configs: Bulk config recovery from archive.org (Part 2)
This is a bulk recovery of the sensor configs found at
https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations

The config sections themselves are unaltered, but I've selectively added
some, but not all of the extra info around them. Anywhere there's been
extra info added, it should be in comments at the top of the config,
followed by a double newline to indicate the separation. Attribution has
been retained where possible, but links to the mailing list are hosed,
so goto the above archive.org link to check if a config has extra origin
notes.

[groeck: reformatted description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-21 07:36:09 -08:00

49 lines
1.3 KiB
Plaintext

# Configuration file contributed by Olaf Mandel.
# configuration for the Fintek f71882fg as used on the MSI X58 Pro-E (MS-7522)
chip "f71882fg-*"
# Temperature
label temp1 "CPU"
label temp2 "IOH"
label temp3 "System"
# Fans
label fan1 "CPU"
label fan2 "System 1" # This is not confirmed
label fan3 "System 2"
ignore fan2
ignore fan4
# Voltage
label in0 "3.3V"
label in1 "Vcore"
ignore in2
ignore in3
label in4 "5V"
label in5 "12V"
ignore in6
label in7 "3VSB"
label in8 "Vbat"
compute in0 (@ * 2), (@ / 2) # Hardwired in chip, don't change
compute in4 (@ * 5.25), (@ / 5.25) # E24: (12 + 51) / 12
compute in5 (@ * 11), (@ / 11) # E6: ( 1 + 10) / 1
compute in7 (@ * 2), (@ / 2) # Hardwired in chip, don't change
compute in8 (@ * 2), (@ / 2) # Hardwired in chip, don't change
# Thresholds
set in1_max 1.3
set temp1_max 85
set temp1_max_hyst 82
set temp1_crit 100
set temp1_crit_hyst 97
set temp2_max 75
set temp2_max_hyst 72
set temp2_crit 85
set temp2_crit_hyst 82
set temp3_max 55
set temp3_max_hyst 52
set temp3_crit 65
set temp3_crit_hyst 62