mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-29 12:50:43 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
93 lines
2.9 KiB
Plaintext
93 lines
2.9 KiB
Plaintext
# Example configuration for the SuperMicro C2SBE.
|
|
# Contributed by Romain Dolbeau.
|
|
|
|
# The C2SBA is similar to the C2SBE (only with video on-board).
|
|
|
|
|
|
# settings for the supermicro C2SBE
|
|
# Originally written by Romain Dolbeau <romain@dolbeau.org>
|
|
# Uses at your own risk !
|
|
#
|
|
# Here's the info as supplied by Supermicro:
|
|
#
|
|
# Bus Type = ISAIO
|
|
# One W83627DHG
|
|
#
|
|
# Windbond W83627DHG, IndexReg=295, DataReg=296
|
|
# =============================================================
|
|
# Fan1/CPU Fan Speed, Bank 0, Offset 0x29 RPM = 1350000/8/Data
|
|
# Fan2 Fan Speed, Bank 5, Offset 0x53 RPM = 1350000/8/Data
|
|
# Fan3 Fan Speed, Bank 0, Offset 0x28 RPM = 1350000/8/Data
|
|
# Fan4 Fan Speed, Bank 0, Offset 0x3f RPM = 1350000/8/Data
|
|
# Fan5 Fan Speed, Bank 0, Offset 0x2a RPM = 1350000/8/Data
|
|
# CPU Voltage, Bank 0, Offset 0x20 Voltage = Data* 0.008
|
|
# -12V Voltage, Bank 0, Offset 0x26 Voltage =((Data*0.008-2.048)/(10./242.))+2.048
|
|
# +12V Voltage, Bank 0, Offset 0x21 Voltage = Data* 0.008/(10./160.)
|
|
# +3.3V Voltage, Bank 0, Offset 0x22 Voltage = Data* 0.016
|
|
# DIMM Voltage, Bank 0, Offset 0x24 Voltage = Data* 0.008
|
|
# +5V Voltage, Bank 0, Offset 0x25 Voltage = Data* 0.008/(10./40.)
|
|
# +3.3VSb Voltage, Bank 5, Offset 0x50 Voltage = Data* 0.016
|
|
# Battery Voltage, Bank 5, Offset 0x51 Voltage = Data* 0.016
|
|
# CPU Temperature, Bank 1, Offset 0x50 Temperature = Data
|
|
# System Temperature, Bank 0, Offset 0x27 Temperature = Data
|
|
# Chassis Intrusion, Bank 0, Offset 0x42, BitMask 0x10 1 = Bad, 0 = Good
|
|
# (Clear Bit: Bank 0, Offset 0x46, BitMask 0x80)
|
|
|
|
chip "w83627dhg-*"
|
|
# Voltages ; note that in the table above, the .008 and .016 factors are
|
|
# already computed in the driver...
|
|
label in0 "VCore"
|
|
label in1 "+12V"
|
|
label in2 "+3.3V"
|
|
ignore in3
|
|
label in4 "DIMM Voltage"
|
|
label in5 "+5V"
|
|
label in6 "-12V"
|
|
label in7 "+3.3VSB"
|
|
label in8 "VBAT"
|
|
|
|
# CPU Voltage limits are probably CPU-dependant
|
|
compute in0 @, @
|
|
set in0_min 1.0
|
|
set in0_max 1.4
|
|
compute in1 @*16, @/16
|
|
set in1_min 12*0.95
|
|
set in1_max 12*1.05
|
|
compute in2 @, @
|
|
set in2_min 3.3*0.95
|
|
set in2_max 3.3*1.05
|
|
# compute in3 @, @
|
|
# DIMM Voltage limits ???
|
|
compute in4 @, @
|
|
set in4_min 1.8*0.95
|
|
set in4_max 1.8*1.05
|
|
compute in5 @*4, @/4
|
|
set in5_min 5*0.95
|
|
set in5_max 5*1.05
|
|
compute in6 ((@-2.048)*24.2)+2.048, ((@-2.048)/24.2)+2.048
|
|
set in6_min -12*1.05
|
|
set in6_max -12*0.95
|
|
compute in7 @, @
|
|
set in7_min 3.3*0.95
|
|
set in7_max 3.3*1.05
|
|
# VBAT Voltage limits ???
|
|
compute in8 @, @
|
|
set in8_min 3*0.9
|
|
set in8_max 3*1.1
|
|
|
|
# Fans ; default in the driver is fine
|
|
# you should ignore the unplugged ones
|
|
label fan1 "Fan 3"
|
|
label fan2 "Fan1/CPU Fan"
|
|
label fan3 "Fan 5"
|
|
label fan4 "Fan 4"
|
|
label fan5 "Fan 2"
|
|
|
|
# Temperatures
|
|
# Min and Max are environment-dependant
|
|
label temp1 "System Temp"
|
|
set temp1_max 45
|
|
label temp2 "CPU Temp"
|
|
set temp2_max 65
|
|
ignore temp3
|