mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-29 12:50:43 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
74 lines
1.5 KiB
Plaintext
74 lines
1.5 KiB
Plaintext
#
|
|
# Libsensors configuration for SuperMicro C7H61-O and C7H61-L boards.
|
|
#
|
|
# C7H61-L has a single nct6776 sensor chip.
|
|
# C7H61-O has two sensor chips, nct6776 and nct6106. nct6106 is not used
|
|
# for temperature, fans or voltage sensing. Hardware monitoring for this
|
|
# chip is not enabled, and you should not enable it.
|
|
# BIOS allows one to set nct6776 parameters, such as voltage or PWM fan
|
|
# control and default strategy.
|
|
#
|
|
|
|
chip "nct6776-isa-0a30"
|
|
|
|
label in0 "Vcore"
|
|
label in1 "+12V"
|
|
label in2 "AVCC"
|
|
label in3 "+3.3V"
|
|
label in4 "VDIMM"
|
|
label in5 "+5V"
|
|
label in6 "VTT_CPU"
|
|
label in7 "3VSB"
|
|
label in8 "Vbat"
|
|
|
|
compute in1 @*6.6, @/6.6
|
|
compute in5 @*4, @/4
|
|
|
|
# min/max values are set by the BIOS
|
|
|
|
ignore fan1
|
|
label fan2 "System FAN4"
|
|
label fan3 "CPU Fan"
|
|
label fan4 "System FAN2"
|
|
label fan5 "System FAN3"
|
|
|
|
ignore temp7
|
|
ignore temp8
|
|
ignore temp9
|
|
ignore temp10
|
|
|
|
ignore intrusion1
|
|
|
|
|
|
chip "nct6106-*"
|
|
|
|
ignore in0
|
|
ignore in1
|
|
label in2 "AVCC"
|
|
label in3 "+3.3V"
|
|
ignore in4
|
|
ignore in5
|
|
ignore in6
|
|
label in7 "Vbat"
|
|
ignore in8
|
|
|
|
set in2_min 3.3 * 0.90
|
|
set in2_max 3.3 * 1.10
|
|
set in3_min 3.3 * 0.90
|
|
set in3_max 3.3 * 1.10
|
|
set in7_min 3.3 * 0.90
|
|
set in7_max 3.3 * 1.10
|
|
|
|
ignore fan1
|
|
ignore fan2
|
|
ignore fan3
|
|
|
|
ignore temp1
|
|
ignore temp2
|
|
ignore temp3
|
|
ignore temp7
|
|
ignore temp8
|
|
ignore temp9
|
|
|
|
ignore intrusion0
|