mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-28 12:40:42 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
67 lines
1.5 KiB
Plaintext
67 lines
1.5 KiB
Plaintext
# Contributed by Henrique de Moraes Holschuh.
|
|
|
|
# Also compatible with X8SAX.
|
|
|
|
|
|
#
|
|
# Libsensors configuration for SuperMicro C7X58 and X8SAX boards, revision 1.1 or 2.0
|
|
# Scaling factors kindly provided by SuperMicro support.
|
|
#
|
|
# Board has two sensor chips, w83627dhg is not used for temperature,
|
|
# fans or voltage sensing. sensors-detect will suggest that you load the
|
|
# w83627ehf driver but you shouldn't.
|
|
# BIOS allows one to set w83795adg parameters, such as voltage or PWM fan
|
|
# control and default strategy.
|
|
#
|
|
|
|
chip "w83795adg-*"
|
|
|
|
label fan1 "CPU Fan"
|
|
|
|
label in0 "CPU Core"
|
|
label in2 "DIMM"
|
|
label in3 "+5V"
|
|
label in4 "+12V"
|
|
label in5 "-12V"
|
|
label in11 "VTT"
|
|
label in12 "+3.3V"
|
|
label in13 "+3.3Vsb"
|
|
label in14 "Vbatt"
|
|
|
|
# The BIOS does not set the correct limits for VTT, but it is wired.
|
|
# Default to broad limits used on Asus boards, feel free to refine for your CPU.
|
|
set in11_min 0.770
|
|
set in11_max 1.538
|
|
|
|
label temp6 "System temperature"
|
|
label temp7 "CPU temperature"
|
|
|
|
compute in3 @*4, @/4
|
|
compute in4 @*6.62, @/6.62
|
|
compute in5 (@-2.048)*24.2 + 2.048, (@-2.048)/24.2 + 2.048
|
|
|
|
chip "w83627dhg-*"
|
|
|
|
# SuperIO chip used only for the FDC, UARTs and GPIO
|
|
# SENSORS ARE NOT WIRED
|
|
# Power Supply Failure, GP31(From W83627DHG-P) 1 = Good, 0 = Bad
|
|
|
|
ignore fan1
|
|
ignore fan2
|
|
ignore fan3
|
|
ignore fan4
|
|
ignore fan5
|
|
ignore temp1
|
|
ignore temp2
|
|
ignore temp3
|
|
ignore in0
|
|
ignore in1
|
|
ignore in2
|
|
ignore in3
|
|
ignore in4
|
|
ignore in5
|
|
ignore in6
|
|
ignore in7
|
|
ignore in8
|
|
ignore cpu0_vid
|