mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-26 12:24:33 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
56 lines
1.2 KiB
Plaintext
56 lines
1.2 KiB
Plaintext
# lm_sensors 3 configuration file for the Supermicro DLE370 motherboard
|
|
# 2007-09-26, Jean Delvare <khali@linux-fr.org>
|
|
# Comments welcome!
|
|
|
|
chip "lm87-*"
|
|
|
|
### Voltages
|
|
|
|
label in1 "Vcore"
|
|
label in2 "+3.3V"
|
|
label in3 "+5V"
|
|
label in4 "+12V"
|
|
|
|
# All voltage inputs are scaled internally, so the driver itself
|
|
# takes care of it.
|
|
|
|
set in1_min cpu0_vid - 0.08
|
|
set in1_max cpu0_vid + 0.08
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in3_min 5 * 0.95
|
|
set in3_max 5 * 1.05
|
|
set in4_min 12 * 0.95
|
|
set in4_max 12 * 1.05
|
|
|
|
### Fans
|
|
|
|
label fan1 "CPU0 Fan"
|
|
label fan2 "CPU1 Fan"
|
|
|
|
set fan1_div 4
|
|
set fan2_div 4
|
|
|
|
set fan1_min 1800
|
|
set fan2_min 1800
|
|
|
|
# Unfortunately, the analog output appears not to be wired to anything
|
|
# so there is no way to control the fan speeds.
|
|
|
|
### Temperatures
|
|
|
|
label temp1 "Sys Temp"
|
|
label temp2 "CPU0 Temp"
|
|
label temp3 "CPU1 Temp"
|
|
|
|
# The BIOS will set the temperature limits to reasonable values, so
|
|
# you can leave them as is. I tend to prefer more restrictive settings
|
|
# though.
|
|
|
|
set temp1_min 5
|
|
set temp1_max 48
|
|
set temp2_min 5
|
|
set temp2_max 56
|
|
set temp3_min 5
|
|
set temp3_max 56
|