mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-30 13:00:30 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
109 lines
2.6 KiB
Plaintext
109 lines
2.6 KiB
Plaintext
# Example configuration for the SuperMicro X7SBU. Contributed by Joe Ogulin.
|
|
|
|
# Monitoring hardware on this board: Winbond W83793G on ICH9 SMBus (driver
|
|
# w83793) and integrated sensors in the CPU (driver coretemp). A few voltages
|
|
# also available from the Winbond W83627HF Super-I/O chip.
|
|
|
|
|
|
# settings for the supermicro X7SBU
|
|
#
|
|
chip "w83793-*"
|
|
|
|
# 0x10, CPU Core
|
|
label in0 "CPU Core"
|
|
# 0x11, unconnected according to support, 1.5V in BIOS ?
|
|
label in1 "+1.25V"
|
|
set in1_min 1.25*0.95
|
|
set in1_max 1.25*1.05
|
|
# 0x12, unconnected according to support, VTT=1.2V in BIOS ?
|
|
label in2 "VTT"
|
|
# 0x14, -12V
|
|
label in3 "-12V"
|
|
# From Supermicro support information...
|
|
# compute in3 (((@/8)*18500)/256)-16, (((@+16)*256)/18500)*8
|
|
# ... but this from Jean Delvare works better in pratice
|
|
compute in3 (@ * 5.14) - 14.91, (@ + 14.91) / 5.14
|
|
set in3_min -12*1.05
|
|
set in3_max -12*0.95
|
|
# 0x15, DIMM
|
|
label in4 "DIMM"
|
|
# 0x16, +3.3V
|
|
label in5 "+3.3V"
|
|
set in5_min 3.3*0.95
|
|
set in5_max 3.3*1.05
|
|
# 0x17, +12V
|
|
label in6 "+12V"
|
|
compute in6 @*12,@/12
|
|
set in6_min 12*0.95
|
|
set in6_max 12*1.05
|
|
# Ox18, +5V
|
|
label in7 "+5V"
|
|
compute in7 @-0.15,@+0.15
|
|
set in7_min 5*0.95
|
|
set in7_max 5*1.05
|
|
# 0x19, 5VSB
|
|
label in8 "5VSB"
|
|
compute in8 @-0.15,@+0.15
|
|
set in8_min 5*0.95
|
|
set in8_max 5*1.05
|
|
# 0x1a, Battery Voltage
|
|
label in9 "VBAT"
|
|
|
|
label temp1 "CPU Temp"
|
|
ignore temp2
|
|
ignore temp3
|
|
ignore temp4
|
|
label temp5 "Sys Temp"
|
|
ignore temp6
|
|
|
|
# 3 connected
|
|
# note that these fan labels are for a 1U rackmount and are given their
|
|
# positions based on where they are when you look at it from the front
|
|
# towards the back
|
|
#
|
|
# relabel them as necessary to however you have them set up
|
|
label fan1 "Right Fan"
|
|
label fan2 "Mid-right Fan"
|
|
label fan3 "Middle Fan"
|
|
ignore fan4
|
|
ignore fan5
|
|
ignore fan6
|
|
ignore fan7
|
|
ignore fan8
|
|
ignore fan9
|
|
ignore fan10
|
|
ignore fan12
|
|
ignore fan12
|
|
# Override CPU temperature threshold
|
|
set temp1_max 80
|
|
set temp1_max_hyst 70
|
|
|
|
set temp5_max 60
|
|
set temp5_max_hyst 55
|
|
|
|
# NOTE: nearly everything on this chip is not used you can turn on alarms, if
|
|
# you have the appropriate setup for it and want to have chassis intrusion
|
|
# detection turned on
|
|
|
|
chip "w83627hf-*"
|
|
|
|
ignore in0
|
|
ignore in1
|
|
ignore in2
|
|
label in3 "+5.0V"
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
set in3_min 5*0.95
|
|
set in3_max 5*1.05
|
|
ignore in4
|
|
ignore in5
|
|
ignore in6
|
|
ignore in7
|
|
ignore in8
|
|
ignore fan1
|
|
ignore fan2
|
|
ignore fan3
|
|
ignore alarms
|
|
ignore temp1
|
|
ignore temp2
|
|
ignore temp3
|