mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-10 16:30:50 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
110 lines
3.7 KiB
Plaintext
110 lines
3.7 KiB
Plaintext
# Sensors configuration file used by 'libsensors' for Tyan S2466-4M
|
|
#
|
|
# Edited by: kevin schlichter <kevins at tyan dot com> 05.16.03
|
|
# Update 07.30.03:kevin schlichter: add vid support
|
|
# Update 2009-Apr-01 Adam Thompson <athompso at athompso dot net>: radically
|
|
# updated for lm_sensors 3.0.2 & Linux kernel 2.6.27 (aka Ubuntu 8.10)
|
|
#
|
|
# Note that in the 2.6 series of kernels, with lm_sensors 3.0.2, it is
|
|
# no longer necessary to jump through force_subclient= and ignore_* hoops
|
|
# when loading the w83782d module; its default behaviour is sufficient
|
|
# to support itself correctly (and it finds the 3 subclients without any
|
|
# additional prompting). This does NOT allow access to the other chip,
|
|
# a W83627HF, over I2C, but this second chip is mapped into the ISA I/O
|
|
# space anyway, and loading the "w83627hf" module without any options
|
|
# locates it and accesses it perfectly fine. See also notes below about
|
|
# the inadvisability of overusing the I2C bus on this motherboard anyway.
|
|
# This has only been tested on MY board, which is the -4M variant, with
|
|
# BIOS 4.06. Depending on your BIOS version, you may or may not want to
|
|
# use the "init=0" module options INSTEAD OF setting various mins & maxes
|
|
# below, particularly temperature-wise. YMMV.
|
|
# -Adam Thompson, 2009-Apr-01
|
|
#####
|
|
|
|
# set min/max limits to 5% for the critical voltages
|
|
# set min/max limits to 10% for the non-critical voltages
|
|
# set min/max limits to 20% for the battery voltage
|
|
|
|
|
|
chip "w83782d-*"
|
|
ignore in0
|
|
ignore in1
|
|
label in2 "AGP V"
|
|
set in2_min 3.3*0.95
|
|
set in2_max 3.3*1.05
|
|
label in3 " +5 V"
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
set in3_min 5.0*0.95
|
|
set in3_max 5.0*1.05
|
|
label in4 "DDR V"
|
|
ignore in5
|
|
ignore in7
|
|
label in6 "3 VSB"
|
|
set in6_max 3.0*1.05
|
|
set in6_min 3.0*0.95
|
|
label in8 "Bat V"
|
|
set in8_min 3.3*0.80
|
|
set in8_max 3.3*1.20
|
|
ignore vid
|
|
label fan1 "Chassis Fan 2"
|
|
label fan2 "Chassis Fan 1"
|
|
label fan3 "PSU Fan"
|
|
label temp1 "VRM2 Temp"
|
|
label temp2 "CPU1 Temp"
|
|
label temp3 "CPU2 Temp"
|
|
# set temp1_type 2
|
|
# set temp1_max 40
|
|
# set temp1_max_hyst 60
|
|
# set temp2_type 2
|
|
# set temp2_max 70
|
|
# set temp2_max_hyst 80
|
|
# set temp3_type 2
|
|
# set temp3_max 70
|
|
# set temp3_max_hyst 80
|
|
|
|
# lm_sensors ticket#1795 (http://www.lm-sensors.org/ticket/1795) also
|
|
# strongly suggests using the ISA bus where possible to avoid overloading
|
|
# the SMBus on Tyan motherboards.
|
|
# Accessing this via ISA inb/outb also avoids the need altogether to use
|
|
# force_subclient= options when loading the w83782d module.
|
|
|
|
chip "w83627hf-*"
|
|
label in0 "VCore1"
|
|
set in0_min cpu0_vid*0.95
|
|
set in0_max cpu0_vid*1.05
|
|
label in1 "VCore2"
|
|
set in1_min cpu0_vid*0.95
|
|
set in1_max cpu0_vid*1.05
|
|
label in2 "+3.3 V"
|
|
set in2_min 3.3*0.95
|
|
set in2_max 3.3*1.05
|
|
ignore in3
|
|
label in4 " +12 V"
|
|
compute in4 ((3.8/1)+1)*@ , @/((3.8/1)+1)
|
|
set in4_max 12*0.90
|
|
set in4_min 12*1.10
|
|
label in5 " -12 V"
|
|
compute in5 (5.14*@)-14.91 , (@+14.91)/5.14
|
|
set in5_max -12*0.90
|
|
set in5_min -12*1.10
|
|
ignore in6
|
|
ignore in7
|
|
ignore in8
|
|
ignore vid
|
|
label temp1 "VRM1 Temp"
|
|
label temp2 "AGP Temp"
|
|
label temp3 "DDR Temp"
|
|
label fan1 "CPU1 Fan"
|
|
label fan2 "CPU2 Fan"
|
|
ignore fan3
|
|
# set temp1_type 2
|
|
# set temp1_max 40
|
|
# set temp1_max_hyst 37
|
|
# set temp2_type 2
|
|
# set temp2_max 52
|
|
# set temp2_max_hyst 47
|
|
# set temp3_type 2
|
|
# set temp3_max 52
|
|
# set temp3_max_hyst 47
|
|
set beep_enable 0
|