wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-24 12:04:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
beea4cb8a3ef62566639fbfa1c5bfcd3cecbb1de
lm-sensors/kernel/busses/i2c-ali1535.c
T
Mark D. Studebaker d2c47f4f5d add delay loops everywhere, as recommended by the ALI 1535 Bios Programming Guide. 
Should fix stability problems.
      Patch by Ubel Walter <ubel@heidenhain.de>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2942 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-27 02:22:10 +00:00

535 lines
15 KiB
C
Raw Blame History

/*
i2c-ali1535.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Dan Eaton <dan.eaton@rocketlogix.com> and
Stephen Rousset<stephen.rousset@rocketlogix.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
This is the driver for the SMB Host controller on
Acer Labs Inc. (ALI) M1535 South Bridge.
The M1535 is a South bridge for portable systems.
It is very similar to the M15x3 South bridges also produced
by Acer Labs Inc. Some of the registers within the part
have moved and some have been redefined slightly. Additionally,
the sequencing of the SMBus transactions has been modified
to be more consistent with the sequencing recommended by
the manufacturer and observed through testing. These
changes are reflected in this driver and can be identified
by comparing this driver to the i2c-ali15x3 driver.
For an overview of these chips see http://www.acerlabs.com
The SMB controller is part of the 7101 device, which is an
ACPI-compliant Power Management Unit (PMU).
The whole 7101 device has to be enabled for the SMB to work.
You can't just enable the SMB alone.
The SMB and the ACPI have separate I/O spaces.
We make sure that the SMB is enabled. We leave the ACPI alone.
This driver controls the SMB Host only.
This driver does not use interrupts.
*/
/* Note: we assume there can only be one ALI1535, with one SMBus interface */
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/semaphore.h>
#include "version.h"
#include "sensors_compat.h"
/* ALI1535 SMBus address offsets */
#define SMBHSTSTS (0 + ali1535_smba)
#define SMBHSTTYP (1 + ali1535_smba)
#define SMBHSTPORT (2 + ali1535_smba)
#define SMBHSTCMD (7 + ali1535_smba)
#define SMBHSTADD (3 + ali1535_smba)
#define SMBHSTDAT0 (4 + ali1535_smba)
#define SMBHSTDAT1 (5 + ali1535_smba)
#define SMBBLKDAT (6 + ali1535_smba)
/* PCI Address Constants */
#define SMBCOM 0x004
#define SMBREV 0x008
#define SMBCFG 0x0D1
#define SMBBA 0x0E2
#define SMBHSTCFG 0x0F0
#define SMBCLK 0x0F2
/* Other settings */
#define MAX_TIMEOUT 500 /* times 1/100 sec */
#define ALI1535_SMB_IOSIZE 32
/*
*/
#define ALI1535_SMB_DEFAULTBASE 0x8040
/* ALI1535 address lock bits */
#define ALI1535_LOCK 0x06 < dwe >
/* ALI1535 command constants */
#define ALI1535_QUICK 0x00
#define ALI1535_BYTE 0x10
#define ALI1535_BYTE_DATA 0x20
#define ALI1535_WORD_DATA 0x30
#define ALI1535_BLOCK_DATA 0x40
#define ALI1535_I2C_READ 0x60
#define ALI1535_DEV10B_EN 0x80 /* Enable 10-bit addressing in */
/* I2C read */
#define ALI1535_T_OUT 0x08 /* Time-out Command (write) */
#define ALI1535_A_HIGH_BIT9 0x08 /* Bit 9 of 10-bit address in */
/* Alert-Response-Address */
/* (read) */
#define ALI1535_KILL 0x04 /* Kill Command (write) */
#define ALI1535_A_HIGH_BIT8 0x04 /* Bit 8 of 10-bit address in */
/* Alert-Response-Address */
/* (read) */
#define ALI1535_D_HI_MASK 0x03 /* Mask for isolating bits 9-8 */
/* of 10-bit address in I2C */
/* Read Command */
/* ALI1535 status register bits */
#define ALI1535_STS_IDLE 0x04
#define ALI1535_STS_BUSY 0x08 /* host busy */
#define ALI1535_STS_DONE 0x10 /* transaction complete */
#define ALI1535_STS_DEV 0x20 /* device error */
#define ALI1535_STS_BUSERR 0x40 /* bus error */
#define ALI1535_STS_FAIL 0x80 /* failed bus transaction */
#define ALI1535_STS_ERR 0xE0 /* all the bad error bits */
#define ALI1535_BLOCK_CLR 0x04 /* reset block data index */
/* ALI1535 device address register bits */
#define ALI1535_RD_ADDR 0x01 /* Read/Write Bit in Device */
/* Address field */
/* -> Write = 0 */
/* -> Read = 1 */
#define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */
static unsigned short ali1535_smba = 0;
DECLARE_MUTEX(i2c_ali1535_sem);
/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
Note the differences between kernels with the old PCI BIOS interface and
newer kernels with the real PCI interface. In compat.h some things are
defined to make the transition easier. */
int ali1535_setup(struct pci_dev *ALI1535_dev)
{
int error_return = 0;
unsigned char temp;
/* Check the following things:
- SMB I/O address is initialized
- Device is enabled
- We can use the addresses
*/
/* Determine the address of the SMBus area */
pci_read_config_word(ALI1535_dev, SMBBA, &ali1535_smba);
ali1535_smba &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
if (ali1535_smba == 0) {
printk
("i2c-ali1535.o: ALI1535_smb region uninitialized - upgrade BIOS?\n");
error_return = -ENODEV;
}
if (error_return == -ENODEV)
goto END;
if (check_region(ali1535_smba, ALI1535_SMB_IOSIZE)) {
printk
("i2c-ali1535.o: ALI1535_smb region 0x%x already in use!\n",
ali1535_smba);
error_return = -ENODEV;
}
if (error_return == -ENODEV)
goto END;
/* check if whole device is enabled */
pci_read_config_byte(ALI1535_dev, SMBCFG, &temp);
if ((temp & ALI1535_SMBIO_EN) == 0) {
printk
("i2c-ali1535.o: SMB device not enabled - upgrade BIOS?\n");
error_return = -ENODEV;
goto END;
}
/* Is SMB Host controller enabled? */
pci_read_config_byte(ALI1535_dev, SMBHSTCFG, &temp);
if ((temp & 1) == 0) {
printk
("i2c-ali1535.o: SMBus controller not enabled - upgrade BIOS?\n");
error_return = -ENODEV;
goto END;
}
/* set SMB clock to 74KHz as recommended in data sheet */
pci_write_config_byte(ALI1535_dev, SMBCLK, 0x20);
/* Everything is happy, let's grab the memory and set things up. */
request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb");
#ifdef DEBUG
/*
The interrupt routing for SMB is set up in register 0x77 in the
1533 ISA Bridge device, NOT in the 7101 device.
Don't bother with finding the 1533 device and reading the register.
if ((....... & 0x0F) == 1)
printk("i2c-ali1535.o: ALI1535 using Interrupt 9 for SMBus.\n");
*/
pci_read_config_byte(ALI1535_dev, SMBREV, &temp);
printk("i2c-ali1535.o: SMBREV = 0x%X\n", temp);
printk("i2c-ali1535.o: ALI1535_smba = 0x%X\n", ali1535_smba);
#endif /* DEBUG */
END:
return error_return;
}
#define MAX_TIMEOUT_HEROS 100
#define MAX_TIMEOUT_BLOCK_HEROS 500
#define MAX_TRY_HEROS 3
/* believe it or not this is the delay technique recommended by ALI */
static void ali1535_delay_loop(void)
{
int i;
for(i=0;i<30;i++)
outb_p(0,0xEB);
}
static int ali1535_wait_for_status(int count,int status)
{
int i;
int dat;
for (i = 0; i < count; i++) {
ali1535_delay_loop();
dat = inb_p(SMBHSTSTS);
if (dat == status)
break;
}
return i == count ? 1 : 0;
}
/* Return -1 on error. */
s32 ali1535_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
{
int i, len;
s32 result = 0;
int timeout = 0;
int oldsize = size;
down(&i2c_ali1535_sem);
repeat:
if(timeout++ > MAX_TRY_HEROS) {
result = -1;
goto EXIT;
}
/* clear status */
outb_p(0xFF, SMBHSTSTS);
if (ali1535_wait_for_status(MAX_TIMEOUT_HEROS,ALI1535_STS_IDLE))
goto repeat;
outb_p(ALI1535_KILL,SMBHSTTYP);
if (ali1535_wait_for_status(MAX_TIMEOUT_HEROS,ALI1535_STS_FAIL))
goto repeat;
/* clear status */
outb_p(0xFF, SMBHSTSTS);
if (ali1535_wait_for_status(MAX_TIMEOUT_HEROS,ALI1535_STS_IDLE))
goto repeat;
switch (size) {
case I2C_SMBUS_QUICK:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD);
ali1535_delay_loop();
size = ALI1535_QUICK;
outb_p(size, SMBHSTTYP); /* output command */
ali1535_delay_loop();
break;
case I2C_SMBUS_BYTE:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD);
ali1535_delay_loop();
size = ALI1535_BYTE;
outb_p(size, SMBHSTTYP); /* output command */
ali1535_delay_loop();
if (read_write == I2C_SMBUS_WRITE) {
outb_p(command, SMBHSTCMD);
ali1535_delay_loop();
}
break;
case I2C_SMBUS_BYTE_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD);
ali1535_delay_loop();
size = ALI1535_BYTE_DATA;
outb_p(size, SMBHSTTYP); /* output command */
ali1535_delay_loop();
outb_p(command, SMBHSTCMD);
ali1535_delay_loop();
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->byte, SMBHSTDAT0);
ali1535_delay_loop();
}
break;
case I2C_SMBUS_WORD_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD);
ali1535_delay_loop();
size = ALI1535_WORD_DATA;
outb_p(size, SMBHSTTYP); /* output command */
outb_p(command, SMBHSTCMD);
ali1535_delay_loop();
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0);
ali1535_delay_loop();
outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
ali1535_delay_loop();
}
break;
case I2C_SMBUS_BLOCK_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD);
ali1535_delay_loop();
size = ALI1535_BLOCK_DATA;
outb_p(size, SMBHSTTYP); /* output command */
outb_p(command, SMBHSTCMD);
ali1535_delay_loop();
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
if (len < 0) {
len = 0;
data->block[0] = len;
}
if (len > 32) {
len = 32;
data->block[0] = len;
}
outb_p(len, SMBHSTDAT0);
ali1535_delay_loop();
{
int val;
val = inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR;
ali1535_delay_loop();
outb_p(val, SMBHSTTYP); /* Reset SMBBLKDAT */
ali1535_delay_loop();
}
for (i = 1; i <= len; i++) {
outb_p(data->block[i], SMBBLKDAT);
ali1535_delay_loop();
}
}
break;
default:
printk
(KERN_WARNING "i2c-ali1535.o: Unsupported transaction %d\n", size);
result = -1;
goto EXIT;
}
/* start the transaction */
outb_p(0xFF, SMBHSTPORT);
ali1535_delay_loop();
if (ali1535_wait_for_status(size == ALI1535_BLOCK_DATA ?
MAX_TIMEOUT_BLOCK_HEROS :
MAX_TIMEOUT_HEROS ,
ALI1535_STS_IDLE | ALI1535_STS_DONE)) {
size = oldsize;
goto repeat;
}
/* clear status */
outb_p(0xFF, SMBHSTSTS);
ali1535_delay_loop();
if(inb_p(SMBHSTSTS) != ALI1535_STS_IDLE) {
size = oldsize;
goto repeat;
}
if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) {
result = 0;
goto EXIT;
}
switch (size) {
case ALI1535_BYTE: /* Result put in SMBHSTDAT0 */
data->byte = inb_p(SMBHSTDAT0);
ali1535_delay_loop();
break;
case ALI1535_BYTE_DATA:
data->byte = inb_p(SMBHSTDAT0);
ali1535_delay_loop();
break;
case ALI1535_WORD_DATA:
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
ali1535_delay_loop();
break;
case ALI1535_BLOCK_DATA:
len = inb_p(SMBHSTDAT0);
ali1535_delay_loop();
if (len > 32)
len = 32;
data->block[0] = len;
{
int val;
val = inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR;
ali1535_delay_loop();
outb_p(val, SMBHSTTYP); /* Reset SMBBLKDAT */
ali1535_delay_loop();
}
for (i = 1; i <= data->block[0]; i++) {
data->block[i] = inb_p(SMBBLKDAT);
ali1535_delay_loop();
#ifdef DEBUG
printk
("i2c-ali1535.o: Blk: len=%d, i=%d, data=%02x\n",
len, i, data->block[i]);
#endif /* DEBUG */
}
break;
}
EXIT:
up(&i2c_ali1535_sem);
return result;
}
static void ali1535_inc(struct i2c_adapter *adapter)
{
#ifdef MODULE
MOD_INC_USE_COUNT;
#endif
}
static void ali1535_dec(struct i2c_adapter *adapter)
{
#ifdef MODULE
MOD_DEC_USE_COUNT;
#endif
}
u32 ali1535_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
}
static struct i2c_algorithm smbus_algorithm = {
.name = "Non-i2c SMBus adapter",
.id = I2C_ALGO_SMBUS,
.smbus_xfer = ali1535_access,
.functionality = ali1535_func,
};
static struct i2c_adapter ali1535_adapter = {
.name = "unset",
.id = I2C_ALGO_SMBUS | I2C_HW_SMBUS_ALI1535,
.algo = &smbus_algorithm,
.inc_use = ali1535_inc,
.dec_use = ali1535_dec,
};
static struct pci_device_id ali1535_ids[] __devinitdata = {
{
.vendor = PCI_VENDOR_ID_AL,
.device = PCI_DEVICE_ID_AL_M7101,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{ 0, }
};
static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
if (ali1535_setup(dev)) {
printk
("i2c-ali1535.o: ALI1535 not detected, module not inserted.\n");
return -ENODEV;
}
sprintf(ali1535_adapter.name, "SMBus ALI1535 adapter at %04x",
ali1535_smba);
return i2c_add_adapter(&ali1535_adapter);
}
static void __devexit ali1535_remove(struct pci_dev *dev)
{
i2c_del_adapter(&ali1535_adapter);
release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
}
static struct pci_driver ali1535_driver = {
.name = "ali1535 smbus",
.id_table = ali1535_ids,
.probe = ali1535_probe,
.remove = __devexit_p(ali1535_remove),
};
static int __init i2c_ali1535_init(void)
{
printk("i2c-ali1535.o version %s (%s)\n", LM_VERSION, LM_DATE);
return pci_module_init(&ali1535_driver);
}
static void __exit i2c_ali1535_exit(void)
{
pci_unregister_driver(&ali1535_driver);
}
MODULE_AUTHOR
("Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, "
"Mark D. Studebaker <mdsxyz123@yahoo.com> and Dan Eaton <dan.eaton@rocketlogix.com>");
MODULE_DESCRIPTION("ALI1535 SMBus driver");
MODULE_LICENSE("GPL");
module_init(i2c_ali1535_init);
module_exit(i2c_ali1535_exit);
Reference in new issue View Git Blame Copy Permalink