wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-11-01 13:20:30 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
bfccc6a6e30b8976b276d648ab2af36986776a86
lm-sensors/kernel/chips/sis5595.c
T
Kyosti Malkki 79aed13889 (Kyösti) Support for the sensor hardware in SiS 5595. This has an 
integrated LM78, so the driver is only a customized copy of lm78.c
This southbridge can also do i2c, but this not enough documented in
the datasheet. So i2c is currently not supported.

Some cosmetic changes for VIA driver and documentation.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@196 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-02-06 12:04:48 +00:00

807 lines
26 KiB
C
Raw Blame History

/*
sis5595.c - Part of lm_sensors, Linux kernel modules
for hardware monitoring
Copyright (c) 1998 Frodo Looijaard <frodol@dds.nl>,
Kyösti Mälkki <kmalkki@cc.hut.fi>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/malloc.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/sysctl.h>
#include <linux/pci.h>
#if LINUX_VERSION_CODE < 0x020136 /* 2.1.54 */
#include <linux/bios32.h>
#endif
#include <asm/errno.h>
#include <asm/io.h>
#include <linux/types.h>
#include "smbus.h"
#include "version.h"
#include "i2c-isa.h"
#include "sensors.h"
#include "i2c.h"
#include "compat.h"
/*
SiS southbridge has lm78 integrated on the same IC,
This drives is a customized copy of lm78.c
*/
/* Many LM78 constants specified below */
/* Length of ISA address segment */
#define LM78_EXTENT 8
#define LM78_BASE_REG 0x68
/* Where are the ISA address/data registers relative to the base address */
#define LM78_ADDR_REG_OFFSET 5
#define LM78_DATA_REG_OFFSET 6
/* The LM78 registers */
#define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2)
#define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2)
#define LM78_REG_IN(nr) (0x20 + (nr))
#define LM78_REG_FAN_MIN(nr) (0x3a + (nr))
#define LM78_REG_FAN(nr) (0x27 + (nr))
#define LM78_REG_TEMP 0x27
#define LM78_REG_TEMP_OVER 0x39
#define LM78_REG_TEMP_HYST 0x3a
#define LM78_REG_ALARM1 0x41
/* Not available in SiS 5595
#define LM78_REG_ALARM2 0x42
*/
#define LM78_REG_VID_FANDIV 0x47
#define LM78_REG_CONFIG 0x40
/* Conversions. Rounding is only done on the TO_REG variants. */
#define IN_TO_REG(val) (((val) * 10 + 8)/16)
#define IN_FROM_REG(val) (((val) * 16) / 10)
#define FAN_TO_REG(val,div) ((val)==0?255:((1350000+(val)*(div)/2)/\
((val)*(div))) & 0xff)
#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
#define TEMP_TO_REG(val) (((val)<0?(((val)-5)/10)&0xff:((val)+5)/10) & 0xff)
#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*10)
#define VID_FROM_REG(val) ((val)==0x1f?0:(val)>=0x10?510-(val)*10:\
(val)>=0x06?0:205-(val)*5)
#define ALARMS_FROM_REG(val) (val)
#define DIV_FROM_REG(val) (1 << (val))
#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
/* Initial limits. To keep them sane, we use the 'standard' translation as
specified in the LM78 sheet. Use the config file to set better limits. */
#define LM78_INIT_IN_0 (vid==350?280:vid)
#define LM78_INIT_IN_1 (vid==350?280:vid)
#define LM78_INIT_IN_2 330
#define LM78_INIT_IN_3 (((500) * 100)/168)
#define LM78_INIT_IN_4 (((1200) * 10)/38)
#define LM78_INIT_IN_5 (((-1200) * -604)/2100)
#define LM78_INIT_IN_6 (((-500) * -604)/909)
#define LM78_INIT_IN_PERCENTAGE 10
#define LM78_INIT_IN_MIN_0 \
(LM78_INIT_IN_0 - LM78_INIT_IN_0 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_0 \
(LM78_INIT_IN_0 + LM78_INIT_IN_0 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_1 \
(LM78_INIT_IN_1 - LM78_INIT_IN_1 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_1 \
(LM78_INIT_IN_1 + LM78_INIT_IN_1 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_2 \
(LM78_INIT_IN_2 - LM78_INIT_IN_2 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_2 \
(LM78_INIT_IN_2 + LM78_INIT_IN_2 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_3 \
(LM78_INIT_IN_3 - LM78_INIT_IN_3 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_3 \
(LM78_INIT_IN_3 + LM78_INIT_IN_3 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_4 \
(LM78_INIT_IN_4 - LM78_INIT_IN_4 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_4 \
(LM78_INIT_IN_4 + LM78_INIT_IN_4 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_5 \
(LM78_INIT_IN_5 - LM78_INIT_IN_5 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_5 \
(LM78_INIT_IN_5 + LM78_INIT_IN_5 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_6 \
(LM78_INIT_IN_6 - LM78_INIT_IN_6 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_6 \
(LM78_INIT_IN_6 + LM78_INIT_IN_6 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_FAN_MIN_1 3000
#define LM78_INIT_FAN_MIN_2 3000
#define LM78_INIT_FAN_MIN_3 3000
#define LM78_INIT_TEMP_OVER 600
#define LM78_INIT_TEMP_HYST 500
#ifdef MODULE
extern int init_module(void);
extern int cleanup_module(void);
#endif /* MODULE */
/* This module may seem overly long and complicated. In fact, it is not so
bad. Quite a lot of bookkeeping is done. A real driver can often cut
some corners. */
/* Types of chips supported */
enum lm78_type { lm78 };
/* For each registered LM78, we need to keep some data in memory. That
data is pointed to by lm78_list[NR]->data. The structure itself is
dynamically allocated, at the same time when a new lm78 client is
allocated. */
struct lm78_data {
struct semaphore lock;
int sysctl_id;
enum lm78_type type;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 in[7]; /* Register value */
u8 in_max[7]; /* Register value */
u8 in_min[7]; /* Register value */
u8 fan[3]; /* Register value */
u8 fan_min[3]; /* Register value */
u8 temp; /* Register value */
u8 temp_over; /* Register value */
u8 temp_hyst; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
u16 alarms; /* Register encoding, combined */
};
static int lm78_init(void);
static int lm78_cleanup(void);
static int lm78_attach_adapter(struct i2c_adapter *adapter);
static int lm78_detect_isa(struct isa_adapter *adapter);
static int lm78_detach_client(struct i2c_client *client);
static int lm78_detach_isa(struct isa_client *client);
static int lm78_new_client(struct i2c_adapter *adapter,
struct i2c_client *new_client);
static void lm78_remove_client(struct i2c_client *client);
static int lm78_command(struct i2c_client *client, unsigned int cmd,
void *arg);
static void lm78_inc_use (struct i2c_client *client);
static void lm78_dec_use (struct i2c_client *client);
static int lm78_read_value(struct i2c_client *client, u8 register);
static int lm78_write_value(struct i2c_client *client, u8 register, u8 value);
static void lm78_update_client(struct i2c_client *client);
static void lm78_init_client(struct i2c_client *client);
static void lm78_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_vid(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_fan_div(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
/* I choose here for semi-static LM78 allocation. Complete dynamic
allocation could also be used; the code needed for this would probably
take more memory than the datastructure takes now. */
#define MAX_LM78_NR 4
static struct i2c_client *lm78_list[MAX_LM78_NR];
/* The driver. I choose to use type i2c_driver, as at is identical to both
smbus_driver and isa_driver, and clients could be of either kind */
static struct i2c_driver lm78_driver = {
/* name */ "SiS 5595",
/* id */ I2C_DRIVERID_SIS5595,
/* flags */ DF_NOTIFY,
/* attach_adapter */ &lm78_attach_adapter,
/* detach_client */ &lm78_detach_client,
/* command */ &lm78_command,
/* inc_use */ &lm78_inc_use,
/* dec_use */ &lm78_dec_use
};
/* Used by lm78_init/cleanup */
static int lm78_initialized = 0;
/* The /proc/sys entries */
/* These files are created for each detected LM78. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table lm78_dir_table_template[] = {
{ LM78_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan },
{ LM78_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan },
{ LM78_SYSCTL_FAN3, "fan3", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan },
{ LM78_SYSCTL_TEMP, "temp", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_temp },
{ LM78_SYSCTL_VID, "vid", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_vid },
{ LM78_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan_div },
{ LM78_SYSCTL_ALARMS, "alarms", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_alarms },
{ 0 }
};
/* This is called when the module is loaded */
int lm78_attach_adapter(struct i2c_adapter *adapter)
{
return lm78_detect_isa((struct isa_adapter *) adapter);
}
/* This is called when the module is loaded */
int lm78_detach_client(struct i2c_client *client)
{
return lm78_detach_isa((struct isa_client *) client);
}
/* Locate SiS bridge and correct base address for LM78 */
#if LINUX_VERSION_CODE >= 0x020136 /* 2.1.54 */
static int find_sis(int *address)
{
struct pci_dev *s_bridge;
u16 val;
if (! pci_present())
return -ENODEV;
s_bridge = pci_find_device(
PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, NULL);
if (! s_bridge)
return -ENODEV;
if ( PCIBIOS_SUCCESSFUL !=
pci_read_config_word(s_bridge, LM78_BASE_REG, &val))
return -ENODEV;
*address = (val & 0xfff8);
return 0;
}
#else
static int find_sis(int *address)
{
unsigned char SIS_bus, SIS_devfn;
u16 val;
if (! pcibios_present())
return -ENODEV;
if(pcibios_find_device(
PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, 0,
&SIS_bus, &SIS_devfn))
return -ENODEV;
if ( PCIBIOS_SUCCESSFUL !=
pcibios_read_config_word(SIS_bus, SIS_devfn, LM78_BASE_REG, &val))
return -ENODEV;
*address = (val & 0xfff8);
return 0;
}
#endif
/* Register and initialize lm78 it. */
int lm78_detect_isa(struct isa_adapter *adapter)
{
int address = 0, err = 0;
struct isa_client *new_client;
enum lm78_type type;
const char *type_name;
const char *client_name;
/* OK, this is detection. */
if (err=find_sis(&address)) {
printk("SiS 5595 southbridge not found\n");
return err;
}
if ( (err = check_region(address, LM78_EXTENT)) < 0 )
{
printk("sis5595.o: IO 0x%x-0x%x already in use\n",
address, address + LM78_EXTENT);
return err;
}
printk("sis5595.o: lm78 io base at 0x%4x\n", address);
type = lm78;
type_name = "SiS 5595 Sensor";
client_name = "SiS 5595";
request_region(address, LM78_EXTENT, type_name);
/* Allocate space for a new client structure */
if (! (new_client = kmalloc(sizeof(struct isa_client) +
sizeof(struct lm78_data),
GFP_KERNEL)))
{
err=-ENOMEM;
goto ERROR1;
}
/* Fill the new client structure with data */
new_client->data = (struct lm78_data *) (new_client + 1);
new_client->addr = 0;
strcpy(new_client->name,client_name);
((struct lm78_data *) (new_client->data))->type = type;
new_client->isa_addr = address;
if ((err = lm78_new_client((struct i2c_adapter *) adapter,
(struct i2c_client *) new_client)))
goto ERROR2;
/* Tell i2c-core a new client has arrived */
if ((err = isa_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((err = sensors_register_entry((struct i2c_client *) new_client,
type_name,
lm78_dir_table_template)) < 0)
goto ERROR4;
((struct lm78_data *) (new_client->data)) -> sysctl_id = err;
err = 0;
/* Initialize the LM78 chip */
lm78_init_client((struct i2c_client *) new_client);
return err;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
isa_detach_client(new_client);
ERROR3:
lm78_remove_client((struct i2c_client *) new_client);
ERROR2:
kfree(new_client);
ERROR1:
release_region(address, LM78_EXTENT);
return err;
}
/* Deregister and remove a LM78 client */
int lm78_detach_isa(struct isa_client *client)
{
int err,i;
for (i = 0; i < MAX_LM78_NR; i++)
if ((client == (struct isa_client *) (lm78_list[i])))
break;
if (i == MAX_LM78_NR) {
printk("sis5595.o: Client to detach not found.\n");
return -ENOENT;
}
sensors_deregister_entry(((struct lm78_data *)(client->data))->sysctl_id);
if ((err = isa_detach_client(client))) {
printk("sis5595.o: Client deregistration failed, client not detached.\n");
return err;
}
lm78_remove_client((struct i2c_client *) client);
release_region(client->isa_addr,LM78_EXTENT);
kfree(client);
return 0;
}
/* Find a free slot, and initialize most of the fields */
int lm78_new_client(struct i2c_adapter *adapter,
struct i2c_client *new_client)
{
int i;
struct lm78_data *data;
/* First, seek out an empty slot */
for(i = 0; i < MAX_LM78_NR; i++)
if (! lm78_list[i])
break;
if (i == MAX_LM78_NR) {
printk("sis5595.o: No empty slots left, recompile and heighten "
"MAX_LM78_NR!\n");
return -ENOMEM;
}
lm78_list[i] = new_client;
new_client->id = i;
new_client->adapter = adapter;
new_client->driver = &lm78_driver;
data = new_client->data;
data->valid = 0;
data->lock = MUTEX;
data->update_lock = MUTEX;
return 0;
}
/* Inverse of lm78_new_client */
void lm78_remove_client(struct i2c_client *client)
{
int i;
for (i = 0; i < MAX_LM78_NR; i++)
if (client == lm78_list[i])
lm78_list[i] = NULL;
}
/* No commands defined yet */
int lm78_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
return 0;
}
/* Nothing here yet */
void lm78_inc_use (struct i2c_client *client)
{
#ifdef MODULE
MOD_INC_USE_COUNT;
#endif
}
/* Nothing here yet */
void lm78_dec_use (struct i2c_client *client)
{
#ifdef MODULE
MOD_DEC_USE_COUNT;
#endif
}
/* The SMBus locks itself, but ISA access must be locked explicitely!
There are some ugly typecasts here, but the good new is - they should
nowhere else be necessary! */
int lm78_read_value(struct i2c_client *client, u8 reg)
{
int res;
down((struct semaphore *) (client->data));
outb_p(reg,(((struct isa_client *) client)->isa_addr) +
LM78_ADDR_REG_OFFSET);
res = inb_p((((struct isa_client *) client)->isa_addr) +
LM78_DATA_REG_OFFSET);
up((struct semaphore *) (client->data));
return res;
}
/* The SMBus locks itself, but ISA access muse be locked explicitely!
There are some ugly typecasts here, but the good new is - they should
nowhere else be necessary! */
int lm78_write_value(struct i2c_client *client, u8 reg, u8 value)
{
down((struct semaphore *) (client->data));
outb_p(reg,((struct isa_client *) client)->isa_addr + LM78_ADDR_REG_OFFSET);
outb_p(value,((struct isa_client *) client)->isa_addr + LM78_DATA_REG_OFFSET);
up((struct semaphore *) (client->data));
return 0;
}
/* Called when we have found a new LM78. It should set limits, etc. */
void lm78_init_client(struct i2c_client *client)
{
int vid;
/* Reset all except Watchdog values and last conversion values
This sets fan-divs to 2, among others */
lm78_write_value(client,LM78_REG_CONFIG,0x80);
vid = lm78_read_value(client,LM78_REG_VID_FANDIV) & 0x0f;
vid |= 0x10;
vid = VID_FROM_REG(vid);
lm78_write_value(client,LM78_REG_IN_MIN(0),IN_TO_REG(LM78_INIT_IN_MIN_0));
lm78_write_value(client,LM78_REG_IN_MAX(0),IN_TO_REG(LM78_INIT_IN_MAX_0));
lm78_write_value(client,LM78_REG_IN_MIN(1),IN_TO_REG(LM78_INIT_IN_MIN_1));
lm78_write_value(client,LM78_REG_IN_MAX(1),IN_TO_REG(LM78_INIT_IN_MAX_1));
lm78_write_value(client,LM78_REG_IN_MIN(2),IN_TO_REG(LM78_INIT_IN_MIN_2));
lm78_write_value(client,LM78_REG_IN_MAX(2),IN_TO_REG(LM78_INIT_IN_MAX_2));
lm78_write_value(client,LM78_REG_IN_MIN(3),IN_TO_REG(LM78_INIT_IN_MIN_3));
lm78_write_value(client,LM78_REG_IN_MAX(3),IN_TO_REG(LM78_INIT_IN_MAX_3));
lm78_write_value(client,LM78_REG_IN_MIN(4),IN_TO_REG(LM78_INIT_IN_MIN_4));
lm78_write_value(client,LM78_REG_IN_MAX(4),IN_TO_REG(LM78_INIT_IN_MAX_4));
lm78_write_value(client,LM78_REG_IN_MIN(5),IN_TO_REG(LM78_INIT_IN_MIN_5));
lm78_write_value(client,LM78_REG_IN_MAX(5),IN_TO_REG(LM78_INIT_IN_MAX_5));
lm78_write_value(client,LM78_REG_IN_MIN(6),IN_TO_REG(LM78_INIT_IN_MIN_6));
lm78_write_value(client,LM78_REG_IN_MAX(6),IN_TO_REG(LM78_INIT_IN_MAX_6));
lm78_write_value(client,LM78_REG_FAN_MIN(1),
FAN_TO_REG(LM78_INIT_FAN_MIN_1,2));
lm78_write_value(client,LM78_REG_FAN_MIN(2),
FAN_TO_REG(LM78_INIT_FAN_MIN_2,2));
lm78_write_value(client,LM78_REG_FAN_MIN(3),
FAN_TO_REG(LM78_INIT_FAN_MIN_3,2));
lm78_write_value(client,LM78_REG_TEMP_OVER,TEMP_TO_REG(LM78_INIT_TEMP_OVER));
lm78_write_value(client,LM78_REG_TEMP_HYST,TEMP_TO_REG(LM78_INIT_TEMP_HYST));
/* Start monitoring */
lm78_write_value(client,LM78_REG_CONFIG,
(lm78_read_value(client,LM78_REG_CONFIG) & 0xf7) | 0x01);
}
void lm78_update_client(struct i2c_client *client)
{
struct lm78_data *data = client->data;
int i;
down(&data->update_lock);
if ((jiffies - data->last_updated > HZ+HZ/2 ) ||
(jiffies < data->last_updated) || ! data->valid) {
#ifdef DEBUG
printk("Starting lm78 update\n");
#endif
for (i = 0; i <= 6; i++) {
data->in[i] = lm78_read_value(client,LM78_REG_IN(i));
data->in_min[i] = lm78_read_value(client,LM78_REG_IN_MIN(i));
data->in_max[i] = lm78_read_value(client,LM78_REG_IN_MAX(i));
}
for (i = 1; i <= 3; i++) {
data->fan[i-1] = lm78_read_value(client,LM78_REG_FAN(i));
data->fan_min[i-1] = lm78_read_value(client,LM78_REG_FAN_MIN(i));
}
data->temp = lm78_read_value(client,LM78_REG_TEMP);
data->temp_over = lm78_read_value(client,LM78_REG_TEMP_OVER);
data->temp_hyst = lm78_read_value(client,LM78_REG_TEMP_HYST);
i = lm78_read_value(client,LM78_REG_VID_FANDIV);
data->vid = i & 0x0f;
data->vid |= 0x10;
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
data->alarms = lm78_read_value(client,LM78_REG_ALARM1);
/* Not available in SiS 5595
+ (lm78_read_value(client,LM78_REG_ALARM2) << 8);
*/
data->last_updated = jiffies;
data->valid = 1;
data->fan_div[2] = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void lm78_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
int nr = ctl_name - LM78_SYSCTL_IN0;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = IN_FROM_REG(data->in_min[nr]);
results[1] = IN_FROM_REG(data->in_max[nr]);
results[2] = IN_FROM_REG(data->in[nr]);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->in_min[nr] = IN_TO_REG(results[0]);
lm78_write_value(client,LM78_REG_IN_MIN(nr),data->in_min[nr]);
}
if (*nrels_mag >= 2) {
data->in_max[nr] = IN_TO_REG(results[1]);
lm78_write_value(client,LM78_REG_IN_MAX(nr),data->in_max[nr]);
}
}
}
void lm78_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
int nr = ctl_name - LM78_SYSCTL_FAN1 + 1;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = FAN_FROM_REG(data->fan_min[nr-1],
DIV_FROM_REG(data->fan_div[nr-1]));
results[1] = FAN_FROM_REG(data->fan[nr-1],
DIV_FROM_REG(data->fan_div[nr-1]));
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->fan_min[nr-1] = FAN_TO_REG(results[0],
DIV_FROM_REG(data->fan_div[nr-1]));
lm78_write_value(client,LM78_REG_FAN_MIN(nr),data->fan_min[nr-1]);
}
}
}
void lm78_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = TEMP_FROM_REG(data->temp_over);
results[1] = TEMP_FROM_REG(data->temp_hyst);
results[2] = TEMP_FROM_REG(data->temp);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->temp_over = TEMP_TO_REG(results[0]);
lm78_write_value(client,LM78_REG_TEMP_OVER,data->temp_over);
}
if (*nrels_mag >= 2) {
data->temp_hyst = TEMP_TO_REG(results[1]);
lm78_write_value(client,LM78_REG_TEMP_HYST,data->temp_hyst);
}
}
}
void lm78_vid(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = VID_FROM_REG(data->vid);
*nrels_mag = 1;
}
}
void lm78_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = ALARMS_FROM_REG(data->alarms);
*nrels_mag = 1;
}
}
void lm78_fan_div(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
int old;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = DIV_FROM_REG(data->fan_div[0]);
results[1] = DIV_FROM_REG(data->fan_div[1]);
results[2] = 2;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
old = lm78_read_value(client,LM78_REG_VID_FANDIV);
if (*nrels_mag >= 2) {
data->fan_div[1] = DIV_TO_REG(results[1]);
old = (old & 0x3f) | (data->fan_div[1] << 6);
}
if (*nrels_mag >= 1) {
data->fan_div[0] = DIV_TO_REG(results[0]);
old = (old & 0xcf) | (data->fan_div[0] << 4);
lm78_write_value(client,LM78_REG_VID_FANDIV,old);
}
}
}
int lm78_init(void)
{
int res;
printk("sis5595.o version %s (%s)\n",LM_VERSION,LM_DATE);
lm78_initialized = 0;
if ((res =i2c_add_driver(&lm78_driver))) {
printk("sis5595.o: Driver registration failed, module not inserted.\n");
lm78_cleanup();
return res;
}
lm78_initialized ++;
return 0;
}
int lm78_cleanup(void)
{
int res;
if (lm78_initialized >= 1) {
if ((res = i2c_del_driver(&lm78_driver))) {
printk("sis5595.o: Driver deregistration failed, module not removed.\n");
return res;
}
lm78_initialized --;
}
return 0;
}
#ifdef MODULE
MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>");
MODULE_DESCRIPTION("SiS 5595 Sensor device");
int init_module(void)
{
return lm78_init();
}
int cleanup_module(void)
{
return lm78_cleanup();
}
#endif /* MODULE */
Reference in new issue View Git Blame Copy Permalink