wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-18 11:09:32 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
c5ccb700b2d760144f92eaeb04cb7a2dc17c8cba
lm-sensors/kernel/chips/lm78.c
T
Frodo Looijaard 065e52c2b1 Changed all isa.h references to i2c-isa.h 
vi `find -type f|xargs grep -l isa.h` worked like a charm :-)


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@182 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-01-29 00:17:11 +00:00

927 lines
31 KiB
C
Raw Blame History

/*
lm78.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 1998 Frodo Looijaard <frodol@dds.nl>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/malloc.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/sysctl.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <linux/types.h>
#include "smbus.h"
#include "version.h"
#include "i2c-isa.h"
#include "sensors.h"
#include "i2c.h"
#include "compat.h"
/* Many LM78 constants specified below */
/* Length of ISA address segment */
#define LM78_EXTENT 8
/* Where are the ISA address/data registers relative to the base address */
#define LM78_ADDR_REG_OFFSET 5
#define LM78_DATA_REG_OFFSET 6
/* The LM78 registers */
#define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2)
#define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2)
#define LM78_REG_IN(nr) (0x20 + (nr))
#define LM78_REG_FAN_MIN(nr) (0x3a + (nr))
#define LM78_REG_FAN(nr) (0x27 + (nr))
#define LM78_REG_TEMP 0x27
#define LM78_REG_TEMP_OVER 0x39
#define LM78_REG_TEMP_HYST 0x3a
#define LM78_REG_ALARM1 0x41
#define LM78_REG_ALARM2 0x42
#define LM78_REG_VID_FANDIV 0x47
#define LM78_REG_CONFIG 0x40
#define LM78_REG_CHIPID 0x49
/* Conversions. Rounding is only done on the TO_REG variants. */
#define IN_TO_REG(val) (((val) * 10 + 8)/16)
#define IN_FROM_REG(val) (((val) * 16) / 10)
#define FAN_TO_REG(val,div) ((val)==0?255:((1350000+(val)*(div)/2)/\
((val)*(div))) & 0xff)
#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
#define TEMP_TO_REG(val) (((val)<0?(((val)-5)/10)&0xff:((val)+5)/10) & 0xff)
#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*10)
#define VID_FROM_REG(val) ((val)==0x1f?0:(val)>=0x10?510-(val)*10:\
(val)>=0x06?0:205-(val)*5)
#define ALARMS_FROM_REG(val) (val)
#define DIV_FROM_REG(val) (1 << (val))
#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
/* Initial limits. To keep them sane, we use the 'standard' translation as
specified in the LM78 sheet. Use the config file to set better limits. */
#define LM78_INIT_IN_0 (vid==350?280:vid)
#define LM78_INIT_IN_1 (vid==350?280:vid)
#define LM78_INIT_IN_2 330
#define LM78_INIT_IN_3 (((500) * 100)/168)
#define LM78_INIT_IN_4 (((1200) * 10)/38)
#define LM78_INIT_IN_5 (((-1200) * -604)/2100)
#define LM78_INIT_IN_6 (((-500) * -604)/909)
#define LM78_INIT_IN_PERCENTAGE 10
#define LM78_INIT_IN_MIN_0 \
(LM78_INIT_IN_0 - LM78_INIT_IN_0 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_0 \
(LM78_INIT_IN_0 + LM78_INIT_IN_0 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_1 \
(LM78_INIT_IN_1 - LM78_INIT_IN_1 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_1 \
(LM78_INIT_IN_1 + LM78_INIT_IN_1 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_2 \
(LM78_INIT_IN_2 - LM78_INIT_IN_2 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_2 \
(LM78_INIT_IN_2 + LM78_INIT_IN_2 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_3 \
(LM78_INIT_IN_3 - LM78_INIT_IN_3 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_3 \
(LM78_INIT_IN_3 + LM78_INIT_IN_3 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_4 \
(LM78_INIT_IN_4 - LM78_INIT_IN_4 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_4 \
(LM78_INIT_IN_4 + LM78_INIT_IN_4 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_5 \
(LM78_INIT_IN_5 - LM78_INIT_IN_5 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_5 \
(LM78_INIT_IN_5 + LM78_INIT_IN_5 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MIN_6 \
(LM78_INIT_IN_6 - LM78_INIT_IN_6 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_IN_MAX_6 \
(LM78_INIT_IN_6 + LM78_INIT_IN_6 * LM78_INIT_IN_PERCENTAGE / 100)
#define LM78_INIT_FAN_MIN_1 3000
#define LM78_INIT_FAN_MIN_2 3000
#define LM78_INIT_FAN_MIN_3 3000
#define LM78_INIT_TEMP_OVER 600
#define LM78_INIT_TEMP_HYST 500
#ifdef MODULE
extern int init_module(void);
extern int cleanup_module(void);
#endif /* MODULE */
/* There are some complications in a module like this. First off, LM78 chips
may be both present on the SMBus and the ISA bus, and we have to handle
those cases separately at some places. Second, there might be several
LM78 chips available (well, actually, that is probably never done; but
it is a clean illustration of how to handle a case like that). Finally,
a specific chip may be attached to *both* ISA and SMBus, and we would
not like to detect it double. Fortunately, in the case of the LM78 at
least, a register tells us what SMBus address we are on, so that helps
a bit - except if there could be more than one SMBus. Groan. No solution
for this yet. */
/* This module may seem overly long and complicated. In fact, it is not so
bad. Quite a lot of bookkeeping is done. A real driver can often cut
some corners. */
/* Types of chips supported */
enum lm78_type { lm78, lm78j, lm79 };
/* For each registered LM78, we need to keep some data in memory. That
data is pointed to by lm78_list[NR]->data. The structure itself is
dynamically allocated, at the same time when a new lm78 client is
allocated. */
struct lm78_data {
struct semaphore lock;
int sysctl_id;
enum lm78_type type;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 in[7]; /* Register value */
u8 in_max[7]; /* Register value */
u8 in_min[7]; /* Register value */
u8 fan[3]; /* Register value */
u8 fan_min[3]; /* Register value */
u8 temp; /* Register value */
u8 temp_over; /* Register value */
u8 temp_hyst; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
u16 alarms; /* Register encoding, combined */
};
static int lm78_init(void);
static int lm78_cleanup(void);
static int lm78_attach_adapter(struct i2c_adapter *adapter);
static int lm78_detect_isa(struct isa_adapter *adapter);
static int lm78_detect_smbus(struct i2c_adapter *adapter);
static int lm78_detach_client(struct i2c_client *client);
static int lm78_detach_isa(struct isa_client *client);
static int lm78_detach_smbus(struct i2c_client *client);
static int lm78_new_client(struct i2c_adapter *adapter,
struct i2c_client *new_client);
static void lm78_remove_client(struct i2c_client *client);
static int lm78_command(struct i2c_client *client, unsigned int cmd,
void *arg);
static void lm78_inc_use (struct i2c_client *client);
static void lm78_dec_use (struct i2c_client *client);
static int lm78_read_value(struct i2c_client *client, u8 register);
static int lm78_write_value(struct i2c_client *client, u8 register, u8 value);
static void lm78_update_client(struct i2c_client *client);
static void lm78_init_client(struct i2c_client *client);
static void lm78_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_vid(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm78_fan_div(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
/* I choose here for semi-static LM78 allocation. Complete dynamic
allocation could also be used; the code needed for this would probably
take more memory than the datastructure takes now. */
#define MAX_LM78_NR 4
static struct i2c_client *lm78_list[MAX_LM78_NR];
/* The driver. I choose to use type i2c_driver, as at is identical to both
smbus_driver and isa_driver, and clients could be of either kind */
static struct i2c_driver lm78_driver = {
/* name */ "LM78(-J) and LM79 sensor driver",
/* id */ I2C_DRIVERID_LM78,
/* flags */ DF_NOTIFY,
/* attach_adapter */ &lm78_attach_adapter,
/* detach_client */ &lm78_detach_client,
/* command */ &lm78_command,
/* inc_use */ &lm78_inc_use,
/* dec_use */ &lm78_dec_use
};
/* Used by lm78_init/cleanup */
static int lm78_initialized = 0;
/* The /proc/sys entries */
/* These files are created for each detected LM78. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table lm78_dir_table_template[] = {
{ LM78_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_in },
{ LM78_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan },
{ LM78_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan },
{ LM78_SYSCTL_FAN3, "fan3", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan },
{ LM78_SYSCTL_TEMP, "temp", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_temp },
{ LM78_SYSCTL_VID, "vid", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_vid },
{ LM78_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_fan_div },
{ LM78_SYSCTL_ALARMS, "alarms", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &lm78_alarms },
{ 0 }
};
/* This function is called when:
* lm78_driver is inserted (when this module is loaded), for each
available adapter
* when a new adapter is inserted (and lm78_driver is still present) */
int lm78_attach_adapter(struct i2c_adapter *adapter)
{
if (i2c_is_isa_adapter(adapter))
return lm78_detect_isa((struct isa_adapter *) adapter);
else
return lm78_detect_smbus(adapter);
}
/* This function is called whenever a client should be removed:
* lm78_driver is removed (when this module is unloaded)
* when an adapter is removed which has a lm78 client (and lm78_driver
is still present). */
int lm78_detach_client(struct i2c_client *client)
{
if (i2c_is_isa_client(client))
return lm78_detach_isa((struct isa_client *) client);
else
return lm78_detach_smbus(client);
}
/* Detect whether there is a LM78 on the ISA bus, register and initialize
it. */
int lm78_detect_isa(struct isa_adapter *adapter)
{
int address,err;
struct isa_client *new_client;
enum lm78_type type;
const char *type_name;
const char *client_name;
/* OK, this is no detection. I know. It will do for now, though. */
err = 0;
for (address = 0x290; (! err) && (address <= 0x290); address += 0x08) {
if (check_region(address, LM78_EXTENT))
continue;
/* Awful, but true: unused port addresses should return 0xff */
if ((inb_p(address + 1) != 0xff) || (inb_p(address + 2) != 0xff) ||
(inb_p(address + 3) != 0xff) || (inb_p(address + 7) != 0xff))
continue;
if (inb_p(address + LM78_ADDR_REG_OFFSET) == 0xff) {
outb_p(0x00,address + LM78_ADDR_REG_OFFSET);
if (inb_p(address + LM78_ADDR_REG_OFFSET) == 0xff)
continue;
}
/* Real detection code goes here */
/* Determine exact type */
outb_p(LM78_REG_CHIPID,address + LM78_ADDR_REG_OFFSET);
err = inb_p(address + LM78_DATA_REG_OFFSET) & 0xfe;
if (err == 0x00) {
type = lm78;
type_name = "lm78";
client_name = "LM78 chip";
} else if (err == 0x40) {
type = lm78j;
type_name = "lm78-j";
client_name = "LM78-J chip";
} else if (err == 0xc0) {
type = lm79;
type_name = "lm79";
client_name = "LM79 chip";
} else if (err == 0x02) {
printk("lm78.o: Warning: Winbond W83781D detected (treated as a LM79)\n");
type = lm79;
type_name = "lm79";
client_name = "LM79 chip";
} else {
#ifdef DEBUG
printk("lm78.o: warning: probed non-lm78 chip?!? (%x)\n",err);
#endif
continue;
}
request_region(address, LM78_EXTENT, type_name);
/* Allocate space for a new client structure */
if (! (new_client = kmalloc(sizeof(struct isa_client) +
sizeof(struct lm78_data),
GFP_KERNEL)))
{
err=-ENOMEM;
goto ERROR1;
}
/* Fill the new client structure with data */
new_client->data = (struct lm78_data *) (new_client + 1);
new_client->addr = 0;
strcpy(new_client->name,client_name);
((struct lm78_data *) (new_client->data))->type = type;
new_client->isa_addr = address;
if ((err = lm78_new_client((struct i2c_adapter *) adapter,
(struct i2c_client *) new_client)))
goto ERROR2;
/* Tell i2c-core a new client has arrived */
if ((err = isa_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((err = sensors_register_entry((struct i2c_client *) new_client,
type_name,
lm78_dir_table_template)) < 0)
goto ERROR4;
((struct lm78_data *) (new_client->data)) -> sysctl_id = err;
err = 0;
/* Initialize the LM78 chip */
lm78_init_client((struct i2c_client *) new_client);
continue;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
isa_detach_client(new_client);
ERROR3:
lm78_remove_client((struct i2c_client *) new_client);
ERROR2:
kfree(new_client);
ERROR1:
release_region(address, LM78_EXTENT);
}
return err;
}
/* Deregister and remove a LM78 client */
int lm78_detach_isa(struct isa_client *client)
{
int err,i;
for (i = 0; i < MAX_LM78_NR; i++)
if ((client == (struct isa_client *) (lm78_list[i])))
break;
if (i == MAX_LM78_NR) {
printk("lm78.o: Client to detach not found.\n");
return -ENOENT;
}
sensors_deregister_entry(((struct lm78_data *)(client->data))->sysctl_id);
if ((err = isa_detach_client(client))) {
printk("lm78.o: Client deregistration failed, client not detached.\n");
return err;
}
lm78_remove_client((struct i2c_client *) client);
release_region(client->isa_addr,LM78_EXTENT);
kfree(client);
return 0;
}
int lm78_detect_smbus(struct i2c_adapter *adapter)
{
int address,err;
struct i2c_client *new_client;
enum lm78_type type;
const char *type_name,*client_name;
/* OK, this is no detection. I know. It will do for now, though. */
err = 0;
for (address = 0x20; (! err) && (address <= 0x2f); address ++) {
/* Later on, we will keep a list of registered addresses for each
adapter, and check whether they are used here */
if (smbus_read_byte_data(adapter,address,LM78_REG_CONFIG) < 0)
continue;
/* Real detection code goes here */
/* Determine exact type */
err = smbus_read_byte_data(adapter,address,LM78_REG_CHIPID) & 0xfe;
if (err == 0x00) {
type = lm78;
type_name = "lm78";
client_name = "LM78 chip";
} else if (err == 0x40) {
type = lm78j;
type_name = "lm78-j";
client_name = "LM78-J chip";
} else if (err == 0xc0) {
type = lm79;
type_name = "lm79";
client_name = "LM79 chip";
} else if (err == 0x02) {
printk("lm78.o: Warning: Winbond W83781D detected (treated as a LM79)\n");
type = lm79;
type_name = "lm79";
client_name = "LM79 chip";
} else {
#ifdef DEBUG
printk("lm78.o: warning: probed non-lm78 chip?!? (%x)\n",err);
#endif
continue;
}
/* Allocate space for a new client structure. To counter memory
ragmentation somewhat, we only do one kmalloc. */
if (! (new_client = kmalloc(sizeof(struct i2c_client) +
sizeof(struct lm78_data),
GFP_KERNEL))) {
err = -ENOMEM;
continue;
}
/* Fill the new client structure with data */
new_client->data = (struct lm78_data *) (new_client + 1);
new_client->addr = address;
strcpy(new_client->name,client_name);
((struct lm78_data *) (new_client->data))->type = type;
if ((err = lm78_new_client(adapter,new_client)))
goto ERROR2;
/* Tell i2c-core a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((err = sensors_register_entry(new_client,type_name,
lm78_dir_table_template)) < 0)
goto ERROR4;
((struct lm78_data *) (new_client->data))->sysctl_id = err;
err = 0;
/* Initialize the LM78 chip */
lm78_init_client(new_client);
continue;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
i2c_detach_client(new_client);
ERROR3:
lm78_remove_client((struct i2c_client *) new_client);
ERROR2:
kfree(new_client);
}
return err;
}
int lm78_detach_smbus(struct i2c_client *client)
{
int err,i;
for (i = 0; i < MAX_LM78_NR; i++)
if (client == lm78_list[i])
break;
if ((i == MAX_LM78_NR)) {
printk("lm78.o: Client to detach not found.\n");
return -ENOENT;
}
sensors_deregister_entry(((struct lm78_data *)(client->data))->sysctl_id);
if ((err = i2c_detach_client(client))) {
printk("lm78.o: Client deregistration failed, client not detached.\n");
return err;
}
lm78_remove_client(client);
kfree(client);
return 0;
}
/* Find a free slot, and initialize most of the fields */
int lm78_new_client(struct i2c_adapter *adapter,
struct i2c_client *new_client)
{
int i;
struct lm78_data *data;
/* First, seek out an empty slot */
for(i = 0; i < MAX_LM78_NR; i++)
if (! lm78_list[i])
break;
if (i == MAX_LM78_NR) {
printk("lm78.o: No empty slots left, recompile and heighten "
"MAX_LM78_NR!\n");
return -ENOMEM;
}
lm78_list[i] = new_client;
new_client->id = i;
new_client->adapter = adapter;
new_client->driver = &lm78_driver;
data = new_client->data;
data->valid = 0;
data->lock = MUTEX;
data->update_lock = MUTEX;
return 0;
}
/* Inverse of lm78_new_client */
void lm78_remove_client(struct i2c_client *client)
{
int i;
for (i = 0; i < MAX_LM78_NR; i++)
if (client == lm78_list[i])
lm78_list[i] = NULL;
}
/* No commands defined yet */
int lm78_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
return 0;
}
/* Nothing here yet */
void lm78_inc_use (struct i2c_client *client)
{
#ifdef MODULE
MOD_INC_USE_COUNT;
#endif
}
/* Nothing here yet */
void lm78_dec_use (struct i2c_client *client)
{
#ifdef MODULE
MOD_DEC_USE_COUNT;
#endif
}
/* The SMBus locks itself, but ISA access must be locked explicitely!
We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
would slow down the LM78 access and should not be necessary.
There are some ugly typecasts here, but the good new is - they should
nowhere else be necessary! */
int lm78_read_value(struct i2c_client *client, u8 reg)
{
int res;
if (i2c_is_isa_client(client)) {
down((struct semaphore *) (client->data));
outb_p(reg,(((struct isa_client *) client)->isa_addr) +
LM78_ADDR_REG_OFFSET);
res = inb_p((((struct isa_client *) client)->isa_addr) +
LM78_DATA_REG_OFFSET);
up((struct semaphore *) (client->data));
return res;
} else
return smbus_read_byte_data(client->adapter,client->addr, reg);
}
/* The SMBus locks itself, but ISA access muse be locked explicitely!
We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
would slow down the LM78 access and should not be necessary.
There are some ugly typecasts here, but the good new is - they should
nowhere else be necessary! */
int lm78_write_value(struct i2c_client *client, u8 reg, u8 value)
{
if (i2c_is_isa_client(client)) {
down((struct semaphore *) (client->data));
outb_p(reg,((struct isa_client *) client)->isa_addr + LM78_ADDR_REG_OFFSET);
outb_p(value,((struct isa_client *) client)->isa_addr + LM78_DATA_REG_OFFSET);
up((struct semaphore *) (client->data));
return 0;
} else
return smbus_write_byte_data(client->adapter, client->addr, reg,value);
}
/* Called when we have found a new LM78. It should set limits, etc. */
void lm78_init_client(struct i2c_client *client)
{
int vid;
/* Reset all except Watchdog values and last conversion values
This sets fan-divs to 2, among others */
lm78_write_value(client,LM78_REG_CONFIG,0x80);
vid = lm78_read_value(client,LM78_REG_VID_FANDIV) & 0x0f;
if (((struct lm78_data *) (client->data))->type == lm79)
vid |= (lm78_read_value(client,LM78_REG_CHIPID) & 0x01) >> 4;
else
vid |= 0x10;
vid = VID_FROM_REG(vid);
lm78_write_value(client,LM78_REG_IN_MIN(0),IN_TO_REG(LM78_INIT_IN_MIN_0));
lm78_write_value(client,LM78_REG_IN_MAX(0),IN_TO_REG(LM78_INIT_IN_MAX_0));
lm78_write_value(client,LM78_REG_IN_MIN(1),IN_TO_REG(LM78_INIT_IN_MIN_1));
lm78_write_value(client,LM78_REG_IN_MAX(1),IN_TO_REG(LM78_INIT_IN_MAX_1));
lm78_write_value(client,LM78_REG_IN_MIN(2),IN_TO_REG(LM78_INIT_IN_MIN_2));
lm78_write_value(client,LM78_REG_IN_MAX(2),IN_TO_REG(LM78_INIT_IN_MAX_2));
lm78_write_value(client,LM78_REG_IN_MIN(3),IN_TO_REG(LM78_INIT_IN_MIN_3));
lm78_write_value(client,LM78_REG_IN_MAX(3),IN_TO_REG(LM78_INIT_IN_MAX_3));
lm78_write_value(client,LM78_REG_IN_MIN(4),IN_TO_REG(LM78_INIT_IN_MIN_4));
lm78_write_value(client,LM78_REG_IN_MAX(4),IN_TO_REG(LM78_INIT_IN_MAX_4));
lm78_write_value(client,LM78_REG_IN_MIN(5),IN_TO_REG(LM78_INIT_IN_MIN_5));
lm78_write_value(client,LM78_REG_IN_MAX(5),IN_TO_REG(LM78_INIT_IN_MAX_5));
lm78_write_value(client,LM78_REG_IN_MIN(6),IN_TO_REG(LM78_INIT_IN_MIN_6));
lm78_write_value(client,LM78_REG_IN_MAX(6),IN_TO_REG(LM78_INIT_IN_MAX_6));
lm78_write_value(client,LM78_REG_FAN_MIN(1),
FAN_TO_REG(LM78_INIT_FAN_MIN_1,2));
lm78_write_value(client,LM78_REG_FAN_MIN(2),
FAN_TO_REG(LM78_INIT_FAN_MIN_2,2));
lm78_write_value(client,LM78_REG_FAN_MIN(3),
FAN_TO_REG(LM78_INIT_FAN_MIN_3,2));
lm78_write_value(client,LM78_REG_TEMP_OVER,TEMP_TO_REG(LM78_INIT_TEMP_OVER));
lm78_write_value(client,LM78_REG_TEMP_HYST,TEMP_TO_REG(LM78_INIT_TEMP_HYST));
/* Start monitoring */
lm78_write_value(client,LM78_REG_CONFIG,
(lm78_read_value(client,LM78_REG_CONFIG) & 0xf7) | 0x01);
}
void lm78_update_client(struct i2c_client *client)
{
struct lm78_data *data = client->data;
int i;
down(&data->update_lock);
if ((jiffies - data->last_updated > HZ+HZ/2 ) ||
(jiffies < data->last_updated) || ! data->valid) {
#ifdef DEBUG
printk("Starting lm78 update\n");
#endif
for (i = 0; i <= 6; i++) {
data->in[i] = lm78_read_value(client,LM78_REG_IN(i));
data->in_min[i] = lm78_read_value(client,LM78_REG_IN_MIN(i));
data->in_max[i] = lm78_read_value(client,LM78_REG_IN_MAX(i));
}
for (i = 1; i <= 3; i++) {
data->fan[i-1] = lm78_read_value(client,LM78_REG_FAN(i));
data->fan_min[i-1] = lm78_read_value(client,LM78_REG_FAN_MIN(i));
}
data->temp = lm78_read_value(client,LM78_REG_TEMP);
data->temp_over = lm78_read_value(client,LM78_REG_TEMP_OVER);
data->temp_hyst = lm78_read_value(client,LM78_REG_TEMP_HYST);
i = lm78_read_value(client,LM78_REG_VID_FANDIV);
data->vid = i & 0x0f;
if (data->type == lm79)
data->vid |= (lm78_read_value(client,LM78_REG_CHIPID) & 0x01) >> 4;
else
data->vid |= 0x10;
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
data->alarms = lm78_read_value(client,LM78_REG_ALARM1) +
(lm78_read_value(client,LM78_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
data->fan_div[2] = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void lm78_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
int nr = ctl_name - LM78_SYSCTL_IN0;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = IN_FROM_REG(data->in_min[nr]);
results[1] = IN_FROM_REG(data->in_max[nr]);
results[2] = IN_FROM_REG(data->in[nr]);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->in_min[nr] = IN_TO_REG(results[0]);
lm78_write_value(client,LM78_REG_IN_MIN(nr),data->in_min[nr]);
}
if (*nrels_mag >= 2) {
data->in_max[nr] = IN_TO_REG(results[1]);
lm78_write_value(client,LM78_REG_IN_MAX(nr),data->in_max[nr]);
}
}
}
void lm78_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
int nr = ctl_name - LM78_SYSCTL_FAN1 + 1;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = FAN_FROM_REG(data->fan_min[nr-1],
DIV_FROM_REG(data->fan_div[nr-1]));
results[1] = FAN_FROM_REG(data->fan[nr-1],
DIV_FROM_REG(data->fan_div[nr-1]));
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->fan_min[nr-1] = FAN_TO_REG(results[0],
DIV_FROM_REG(data->fan_div[nr-1]));
lm78_write_value(client,LM78_REG_FAN_MIN(nr),data->fan_min[nr-1]);
}
}
}
void lm78_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = TEMP_FROM_REG(data->temp_over);
results[1] = TEMP_FROM_REG(data->temp_hyst);
results[2] = TEMP_FROM_REG(data->temp);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->temp_over = TEMP_TO_REG(results[0]);
lm78_write_value(client,LM78_REG_TEMP_OVER,data->temp_over);
}
if (*nrels_mag >= 2) {
data->temp_hyst = TEMP_TO_REG(results[1]);
lm78_write_value(client,LM78_REG_TEMP_HYST,data->temp_hyst);
}
}
}
void lm78_vid(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = VID_FROM_REG(data->vid);
*nrels_mag = 1;
}
}
void lm78_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = ALARMS_FROM_REG(data->alarms);
*nrels_mag = 1;
}
}
void lm78_fan_div(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm78_data *data = client->data;
int old;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm78_update_client(client);
results[0] = DIV_FROM_REG(data->fan_div[0]);
results[1] = DIV_FROM_REG(data->fan_div[1]);
results[2] = 2;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
old = lm78_read_value(client,LM78_REG_VID_FANDIV);
if (*nrels_mag >= 2) {
data->fan_div[1] = DIV_TO_REG(results[1]);
old = (old & 0x3f) | (data->fan_div[1] << 6);
}
if (*nrels_mag >= 1) {
data->fan_div[0] = DIV_TO_REG(results[0]);
old = (old & 0xcf) | (data->fan_div[0] << 4);
lm78_write_value(client,LM78_REG_VID_FANDIV,old);
}
}
}
int lm78_init(void)
{
int res;
printk("lm78.o version %s (%s)\n",LM_VERSION,LM_DATE);
lm78_initialized = 0;
if ((res =i2c_add_driver(&lm78_driver))) {
printk("lm78.o: Driver registration failed, module not inserted.\n");
lm78_cleanup();
return res;
}
lm78_initialized ++;
return 0;
}
int lm78_cleanup(void)
{
int res;
if (lm78_initialized >= 1) {
if ((res = i2c_del_driver(&lm78_driver))) {
printk("lm78.o: Driver deregistration failed, module not removed.\n");
return res;
}
lm78_initialized --;
}
return 0;
}
#ifdef MODULE
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver");
int init_module(void)
{
return lm78_init();
}
int cleanup_module(void)
{
return lm78_cleanup();
}
#endif /* MODULE */
Reference in new issue View Git Blame Copy Permalink