lm-sensors/kernel/chips/pcf8574.c

/*
    pcf8574.c - Part of lm_sensors, Linux kernel modules for hardware
             monitoring
    Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
                        Philip Edelbrock <phil@netroedge.com>,
                        Dan Eaton <dan.eaton@rocketlogix.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

/* A few notes about the PCF8574:

* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by
  Philips Semiconductors.  It is designed to provide a byte I2C
  interface to up to 8 separate devices.
  
* The PCF8574 appears as a very simple SMBus device which can be
  read from or written to with SMBUS byte read/write accesses.

* Because of the general purpose nature of this device, it will most
  likely be necessary to customize the /proc interface to suit the
  specific application.

  --Dan

*/


#include <linux/version.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include "sensors.h"
#include "version.h"
#include <linux/init.h>

MODULE_LICENSE("GPL");

/* Addresses to scan */
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { 0x20, 0x27, 0x38, 0x3f, SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };

/* Insmod parameters */
SENSORS_INSMOD_2(pcf8574, pcf8574a);

/* The PCF8574 registers */

/* (No registers.  [Wow! This thing is SIMPLE!] ) */

/* Initial values */
#define PCF8574_INIT 255	/* All outputs on (input mode) */

/* Each client has this additional data */
struct pcf8574_data {
	int sysctl_id;

	struct semaphore update_lock;
	char valid;		/* !=0 if following fields are valid */
	unsigned long last_updated;	/* In jiffies */

	u8 read, write;	        /* Register values */
};

static int pcf8574_attach_adapter(struct i2c_adapter *adapter);
static int pcf8574_detect(struct i2c_adapter *adapter, int address,
			  unsigned short flags, int kind);
static int pcf8574_detach_client(struct i2c_client *client);
static int pcf8574_command(struct i2c_client *client, unsigned int cmd,
			   void *arg);

static void pcf8574_read(struct i2c_client *client, int operation,
			               int ctl_name, int *nrels_mag, long *results);
static void pcf8574_write(struct i2c_client *client, int operation,
			               int ctl_name, int *nrels_mag, long *results);
static void pcf8574_update_client(struct i2c_client *client);
static void pcf8574_init_client(struct i2c_client *client);

/* This is the driver that will be inserted */
static struct i2c_driver pcf8574_driver = {
	.owner		= THIS_MODULE,
	.name		= "PCF8574 sensor chip driver",
	.id		= I2C_DRIVERID_PCF8574,
	.flags		= I2C_DF_NOTIFY,
	.attach_adapter	= pcf8574_attach_adapter,
	.detach_client	= pcf8574_detach_client,
	.command	= pcf8574_command,
};

/* These files are created for each detected PCF8574. This is just a template;
   though at first sight, you might think we could use a statically
   allocated list, we need some way to get back to the parent - which
   is done through one of the 'extra' fields which are initialized
   when a new copy is allocated. */
static ctl_table pcf8574_dir_table_template[] = {
	{PCF8574_SYSCTL_READ, "read", NULL, 0, 0444, NULL, &i2c_proc_real,
	 &i2c_sysctl_real, NULL, &pcf8574_read},
	{PCF8574_SYSCTL_WRITE, "write", NULL, 0, 0644, NULL, &i2c_proc_real,
	 &i2c_sysctl_real, NULL, &pcf8574_write},
	{0}
};

/* I choose here for semi-static PCF8574 allocation. Complete dynamic
   allocation could also be used; the code needed for this would probably
   take more memory than the datastructure takes now. */
static int pcf8574_id = 0;

static int pcf8574_attach_adapter(struct i2c_adapter *adapter)
{
	return i2c_detect(adapter, &addr_data, pcf8574_detect);
}

/* This function is called by i2c_detect */
int pcf8574_detect(struct i2c_adapter *adapter, int address,
		   unsigned short flags, int kind)
{
	int i;
	struct i2c_client *new_client;
	struct pcf8574_data *data;
	int err = 0;
	const char *type_name, *client_name;

	/* Make sure we aren't probing the ISA bus!! This is just a safety check
	   at this moment; i2c_detect really won't call us. */
#ifdef DEBUG
	if (i2c_is_isa_adapter(adapter)) {
		printk
		    ("pcf8574.o: pcf8574_detect called for an ISA bus adapter?!?\n");
		return 0;
	}
#endif

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
		goto ERROR0;

	/* OK. For now, we presume we have a valid client. We now create the
	   client structure, even though we cannot fill it completely yet.
	   But it allows us to access pcf8574_{read,write}_value. */
	if (!(new_client = kmalloc(sizeof(struct i2c_client) +
				   sizeof(struct pcf8574_data),
				   GFP_KERNEL))) {
		err = -ENOMEM;
		goto ERROR0;
	}

	data = (struct pcf8574_data *) (new_client + 1);
	new_client->addr = address;
	new_client->data = data;
	new_client->adapter = adapter;
	new_client->driver = &pcf8574_driver;
	new_client->flags = 0;

	/* Now, we would do the remaining detection. But the PCF8574 is plainly
	   impossible to detect! Stupid chip. */

	/* Determine the chip type */
	if (kind <= 0) {
		if (address >= 0x20 && address <= 0x27)
			kind = pcf8574;
		else if (address >= 0x38 && address <= 0x3f)
			kind = pcf8574a;
		else goto ERROR1;
	}

	if (kind == pcf8574) {
		type_name = "pcf8574";
		client_name = "PCF8574 chip";
	} else
	if (kind == pcf8574a) {
		type_name = "pcf8574a";
		client_name = "PCF8574A chip";
	} else {
#ifdef DEBUG
		printk("pcf8574.o: Internal error: unknown kind (%d)?!?",
		       kind);
#endif
		goto ERROR1;
	}

	/* Fill in the remaining client fields and put it into the global list */
	strcpy(new_client->name, client_name);

	new_client->id = pcf8574_id++;
	data->valid = 0;
	init_MUTEX(&data->update_lock);

	/* Tell the I2C layer a new client has arrived */
	if ((err = i2c_attach_client(new_client)))
		goto ERROR3;

	/* Register a new directory entry with module sensors */
	if ((i = i2c_register_entry(new_client, type_name,
					pcf8574_dir_table_template,
					THIS_MODULE)) < 0) {
		err = i;
		goto ERROR4;
	}
	data->sysctl_id = i;

        /* Initialize the PCF8574 chip */
        pcf8574_init_client(new_client);
	return 0;

/* OK, this is not exactly good programming practice, usually. But it is
   very code-efficient in this case. */

      ERROR4:
	i2c_detach_client(new_client);
      ERROR3:
      ERROR1:
	kfree(new_client);
      ERROR0:
	return err;
}


static int pcf8574_detach_client(struct i2c_client *client)
{
	int err;

	i2c_deregister_entry(((struct pcf8574_data *) (client->data))->
				 sysctl_id);

	if ((err = i2c_detach_client(client))) {
		printk
		    ("pcf8574.o: Client deregistration failed, client not detached.\n");
		return err;
	}

	kfree(client);

	return 0;

}

/* No commands defined yet */
static int pcf8574_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
	return 0;
}

/* Called when we have found a new PCF8574. */
static void pcf8574_init_client(struct i2c_client *client)
{
        struct pcf8574_data *data = client->data;
        data->write = PCF8574_INIT;
	i2c_smbus_write_byte(client, data->write);
}


static void pcf8574_update_client(struct i2c_client *client)
{
	struct pcf8574_data *data = client->data;

	down(&data->update_lock);

	if ((jiffies - data->last_updated > 5*HZ) ||
	    (jiffies < data->last_updated) || !data->valid) {

#ifdef DEBUG
		printk("Starting pcf8574 update\n");
#endif

		data->read = i2c_smbus_read_byte(client); 
		data->last_updated = jiffies;
		data->valid = 1;
	}

	up(&data->update_lock);
}


void pcf8574_read(struct i2c_client *client, int operation,
		    int ctl_name, int *nrels_mag, long *results)
{
	struct pcf8574_data *data = client->data;
	if (operation == SENSORS_PROC_REAL_INFO)
		*nrels_mag = 0;
	else if (operation == SENSORS_PROC_REAL_READ) {
		pcf8574_update_client(client);
		results[0] = data->read;
		*nrels_mag = 1;
	}  
}
void pcf8574_write(struct i2c_client *client, int operation,
		    int ctl_name, int *nrels_mag, long *results)
{
	struct pcf8574_data *data = client->data;
	if (operation == SENSORS_PROC_REAL_INFO)
		*nrels_mag = 0;
	else if (operation == SENSORS_PROC_REAL_READ) {
		results[0] = data->write; 
		*nrels_mag = 1;
	} else if (operation == SENSORS_PROC_REAL_WRITE) {
		if (*nrels_mag == 1) {
			data->write = results[0];
			i2c_smbus_write_byte(client, data->write);
		}
	}
}


static int __init sm_pcf8574_init(void)
{
	printk("pcf8574.o version %s (%s)\n", LM_VERSION, LM_DATE);
	return i2c_add_driver(&pcf8574_driver);
}

static void __exit sm_pcf8574_exit(void)
{
	i2c_del_driver(&pcf8574_driver);
}



MODULE_AUTHOR
    ("Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Dan Eaton <dan.eaton@rocketlogix.com> and Aurelien Jarno <aurelien@aurel32.net>");
MODULE_DESCRIPTION("PCF8574 driver");

module_init(sm_pcf8574_init);
module_exit(sm_pcf8574_exit);