mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-19 11:19:31 +00:00
Mark D. Studebaker
739a87e785
The following patch does the following: Fixed bug with not all alarms enabled. Added ability to read battery voltage Select temperature sensor type at module load time. Added setting for Inside Technologies 786LCD board to example config file I also fixed what looked like a typo in the existing it87 section where in6_min/max was set twice and in7 was not set. As commented I think the equation for the negative voltages are wrong but without that motherboard I can't verify. With the 786LCD board sensors-detect reports a lm78 which doesn't exist and a sis5595 which may be part of the SIS630 chip but doesn't perform the monitoring. The it8705F/SIS950 which is on the board is reported as a misdetect. I didn't know enough about the various chips to figure out how to get correct detections. David Gesswein git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1146 7894878c-1315-0410-8ee3-d5d059ff63e0
510 lines
18 KiB
C
510 lines
18 KiB
C
/*
|
|
sensors.h - Part of lm_sensors, Linux kernel modules for hardware
|
|
monitoring
|
|
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef SENSORS_NSENSORS_H
|
|
#define SENSORS_NSENSORS_H
|
|
|
|
#include <linux/i2c-proc.h>
|
|
|
|
#define LM78_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define LM78_SYSCTL_IN1 1001
|
|
#define LM78_SYSCTL_IN2 1002
|
|
#define LM78_SYSCTL_IN3 1003
|
|
#define LM78_SYSCTL_IN4 1004
|
|
#define LM78_SYSCTL_IN5 1005
|
|
#define LM78_SYSCTL_IN6 1006
|
|
#define LM78_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define LM78_SYSCTL_FAN2 1102
|
|
#define LM78_SYSCTL_FAN3 1103
|
|
#define LM78_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
|
|
#define LM78_SYSCTL_VID 1300 /* Volts * 100 */
|
|
#define LM78_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define LM78_SYSCTL_ALARMS 2001 /* bitvector */
|
|
|
|
#define LM78_ALARM_IN0 0x0001
|
|
#define LM78_ALARM_IN1 0x0002
|
|
#define LM78_ALARM_IN2 0x0004
|
|
#define LM78_ALARM_IN3 0x0008
|
|
#define LM78_ALARM_IN4 0x0100
|
|
#define LM78_ALARM_IN5 0x0200
|
|
#define LM78_ALARM_IN6 0x0400
|
|
#define LM78_ALARM_FAN1 0x0040
|
|
#define LM78_ALARM_FAN2 0x0080
|
|
#define LM78_ALARM_FAN3 0x0800
|
|
#define LM78_ALARM_TEMP 0x0010
|
|
#define LM78_ALARM_BTI 0x0020
|
|
#define LM78_ALARM_CHAS 0x1000
|
|
#define LM78_ALARM_FIFO 0x2000
|
|
#define LM78_ALARM_SMI_IN 0x4000
|
|
|
|
#define W83781D_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define W83781D_SYSCTL_IN1 1001
|
|
#define W83781D_SYSCTL_IN2 1002
|
|
#define W83781D_SYSCTL_IN3 1003
|
|
#define W83781D_SYSCTL_IN4 1004
|
|
#define W83781D_SYSCTL_IN5 1005
|
|
#define W83781D_SYSCTL_IN6 1006
|
|
#define W83781D_SYSCTL_IN7 1007
|
|
#define W83781D_SYSCTL_IN8 1008
|
|
#define W83781D_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define W83781D_SYSCTL_FAN2 1102
|
|
#define W83781D_SYSCTL_FAN3 1103
|
|
#define W83781D_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
|
|
#define W83781D_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
|
|
#define W83781D_SYSCTL_TEMP3 1202 /* Degrees Celcius * 10 */
|
|
#define W83781D_SYSCTL_VID 1300 /* Volts * 100 */
|
|
#define W83781D_SYSCTL_PWM1 1401
|
|
#define W83781D_SYSCTL_PWM2 1402
|
|
#define W83781D_SYSCTL_PWM3 1403
|
|
#define W83781D_SYSCTL_PWM4 1404
|
|
#define W83781D_SYSCTL_SENS1 1501 /* 1, 2, or Beta (3000-5000) */
|
|
#define W83781D_SYSCTL_SENS2 1502
|
|
#define W83781D_SYSCTL_SENS3 1503
|
|
#define W83781D_SYSCTL_RT1 1601 /* 32-entry table */
|
|
#define W83781D_SYSCTL_RT2 1602 /* 32-entry table */
|
|
#define W83781D_SYSCTL_RT3 1603 /* 32-entry table */
|
|
#define W83781D_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define W83781D_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define W83781D_SYSCTL_BEEP 2002 /* bitvector */
|
|
|
|
#define W83781D_ALARM_IN0 0x0001
|
|
#define W83781D_ALARM_IN1 0x0002
|
|
#define W83781D_ALARM_IN2 0x0004
|
|
#define W83781D_ALARM_IN3 0x0008
|
|
#define W83781D_ALARM_IN4 0x0100
|
|
#define W83781D_ALARM_IN5 0x0200
|
|
#define W83781D_ALARM_IN6 0x0400
|
|
#define W83782D_ALARM_IN7 0x10000
|
|
#define W83782D_ALARM_IN8 0x20000
|
|
#define W83781D_ALARM_FAN1 0x0040
|
|
#define W83781D_ALARM_FAN2 0x0080
|
|
#define W83781D_ALARM_FAN3 0x0800
|
|
#define W83781D_ALARM_TEMP1 0x0010
|
|
#define W83781D_ALARM_TEMP23 0x0020 /* 781D only */
|
|
#define W83781D_ALARM_TEMP2 0x0020 /* 782D/783S */
|
|
#define W83781D_ALARM_TEMP3 0x2000 /* 782D only */
|
|
#define W83781D_ALARM_CHAS 0x1000
|
|
|
|
#define LM75_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
|
|
|
|
#define ADM1021_SYSCTL_TEMP 1200
|
|
#define ADM1021_SYSCTL_REMOTE_TEMP 1201
|
|
#define ADM1021_SYSCTL_DIE_CODE 1202
|
|
#define ADM1021_SYSCTL_ALARMS 1203
|
|
|
|
#define ADM1021_ALARM_TEMP_HIGH 0x40
|
|
#define ADM1021_ALARM_TEMP_LOW 0x20
|
|
#define ADM1021_ALARM_RTEMP_HIGH 0x10
|
|
#define ADM1021_ALARM_RTEMP_LOW 0x08
|
|
#define ADM1021_ALARM_RTEMP_NA 0x04
|
|
|
|
#define GL518_SYSCTL_VDD 1000 /* Volts * 100 */
|
|
#define GL518_SYSCTL_VIN1 1001
|
|
#define GL518_SYSCTL_VIN2 1002
|
|
#define GL518_SYSCTL_VIN3 1003
|
|
#define GL518_SYSCTL_FAN1 1101 /* RPM */
|
|
#define GL518_SYSCTL_FAN2 1102
|
|
#define GL518_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
|
|
#define GL518_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define GL518_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define GL518_SYSCTL_BEEP 2002 /* bitvector */
|
|
#define GL518_SYSCTL_FAN1OFF 2003
|
|
#define GL518_SYSCTL_ITERATE 2004
|
|
|
|
#define GL518_ALARM_VDD 0x01
|
|
#define GL518_ALARM_VIN1 0x02
|
|
#define GL518_ALARM_VIN2 0x04
|
|
#define GL518_ALARM_VIN3 0x08
|
|
#define GL518_ALARM_TEMP 0x10
|
|
#define GL518_ALARM_FAN1 0x20
|
|
#define GL518_ALARM_FAN2 0x40
|
|
|
|
#define GL520_SYSCTL_VDD 1000 /* Volts * 100 */
|
|
#define GL520_SYSCTL_VIN1 1001
|
|
#define GL520_SYSCTL_VIN2 1002
|
|
#define GL520_SYSCTL_VIN3 1003
|
|
#define GL520_SYSCTL_VIN4 1004
|
|
#define GL520_SYSCTL_FAN1 1101 /* RPM */
|
|
#define GL520_SYSCTL_FAN2 1102
|
|
#define GL520_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
|
|
#define GL520_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
|
|
#define GL520_SYSCTL_VID 1300
|
|
#define GL520_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define GL520_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define GL520_SYSCTL_BEEP 2002 /* bitvector */
|
|
#define GL520_SYSCTL_FAN1OFF 2003
|
|
#define GL520_SYSCTL_CONFIG 2004
|
|
|
|
#define GL520_ALARM_VDD 0x01
|
|
#define GL520_ALARM_VIN1 0x02
|
|
#define GL520_ALARM_VIN2 0x04
|
|
#define GL520_ALARM_VIN3 0x08
|
|
#define GL520_ALARM_TEMP1 0x10
|
|
#define GL520_ALARM_FAN1 0x20
|
|
#define GL520_ALARM_FAN2 0x40
|
|
#define GL520_ALARM_TEMP2 0x80
|
|
#define GL520_ALARM_VIN4 0x80
|
|
|
|
#define EEPROM_SYSCTL1 1000
|
|
#define EEPROM_SYSCTL2 1001
|
|
#define EEPROM_SYSCTL3 1002
|
|
#define EEPROM_SYSCTL4 1003
|
|
#define EEPROM_SYSCTL5 1004
|
|
#define EEPROM_SYSCTL6 1005
|
|
#define EEPROM_SYSCTL7 1006
|
|
#define EEPROM_SYSCTL8 1007
|
|
|
|
#define LM80_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define LM80_SYSCTL_IN1 1001
|
|
#define LM80_SYSCTL_IN2 1002
|
|
#define LM80_SYSCTL_IN3 1003
|
|
#define LM80_SYSCTL_IN4 1004
|
|
#define LM80_SYSCTL_IN5 1005
|
|
#define LM80_SYSCTL_IN6 1006
|
|
#define LM80_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define LM80_SYSCTL_FAN2 1102
|
|
#define LM80_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
|
|
#define LM80_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define LM80_SYSCTL_ALARMS 2001 /* bitvector */
|
|
|
|
#define ADM9240_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define ADM9240_SYSCTL_IN1 1001
|
|
#define ADM9240_SYSCTL_IN2 1002
|
|
#define ADM9240_SYSCTL_IN3 1003
|
|
#define ADM9240_SYSCTL_IN4 1004
|
|
#define ADM9240_SYSCTL_IN5 1005
|
|
#define ADM9240_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define ADM9240_SYSCTL_FAN2 1102
|
|
#define ADM9240_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
|
|
#define ADM9240_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define ADM9240_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define ADM9240_SYSCTL_ANALOG_OUT 2002
|
|
#define ADM9240_SYSCTL_VID 2003
|
|
|
|
#define ADM9240_ALARM_IN0 0x0001
|
|
#define ADM9240_ALARM_IN1 0x0002
|
|
#define ADM9240_ALARM_IN2 0x0004
|
|
#define ADM9240_ALARM_IN3 0x0008
|
|
#define ADM9240_ALARM_IN4 0x0100
|
|
#define ADM9240_ALARM_IN5 0x0200
|
|
#define ADM9240_ALARM_FAN1 0x0040
|
|
#define ADM9240_ALARM_FAN2 0x0080
|
|
#define ADM9240_ALARM_TEMP 0x0010
|
|
#define ADM9240_ALARM_CHAS 0x1000
|
|
|
|
#define ADM1024_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define ADM1024_SYSCTL_IN1 1001
|
|
#define ADM1024_SYSCTL_IN2 1002
|
|
#define ADM1024_SYSCTL_IN3 1003
|
|
#define ADM1024_SYSCTL_IN4 1004
|
|
#define ADM1024_SYSCTL_IN5 1005
|
|
#define ADM1024_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define ADM1024_SYSCTL_FAN2 1102
|
|
#define ADM1024_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
|
|
#define ADM1024_SYSCTL_TEMP1 1290 /* Degrees Celcius */
|
|
#define ADM1024_SYSCTL_TEMP2 1295 /* Degrees Celcius */
|
|
#define ADM1024_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define ADM1024_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define ADM1024_SYSCTL_ANALOG_OUT 2002
|
|
#define ADM1024_SYSCTL_VID 2003
|
|
|
|
#define ADM1024_ALARM_IN0 0x0001
|
|
#define ADM1024_ALARM_IN1 0x0002
|
|
#define ADM1024_ALARM_IN2 0x0004
|
|
#define ADM1024_ALARM_IN3 0x0008
|
|
#define ADM1024_ALARM_IN4 0x0100
|
|
#define ADM1024_ALARM_IN5 0x0200
|
|
#define ADM1024_ALARM_FAN1 0x0040
|
|
#define ADM1024_ALARM_FAN2 0x0080
|
|
#define ADM1024_ALARM_TEMP 0x0010
|
|
#define ADM1024_ALARM_TEMP1 0x0020
|
|
#define ADM1024_ALARM_TEMP2 0x0001
|
|
#define ADM1024_ALARM_CHAS 0x1000
|
|
|
|
#define ADM1025_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define ADM1025_SYSCTL_IN1 1001
|
|
#define ADM1025_SYSCTL_IN2 1002
|
|
#define ADM1025_SYSCTL_IN3 1003
|
|
#define ADM1025_SYSCTL_IN4 1004
|
|
#define ADM1025_SYSCTL_IN5 1005
|
|
#define ADM1025_SYSCTL_RTEMP 1251
|
|
#define ADM1025_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
|
|
#define ADM1025_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define ADM1025_SYSCTL_ANALOG_OUT 2002
|
|
#define ADM1025_SYSCTL_VID 2003
|
|
|
|
#define ADM1025_ALARM_IN0 0x0001
|
|
#define ADM1025_ALARM_IN1 0x0002
|
|
#define ADM1025_ALARM_IN2 0x0004
|
|
#define ADM1025_ALARM_IN3 0x0008
|
|
#define ADM1025_ALARM_IN4 0x0100
|
|
#define ADM1025_ALARM_IN5 0x0200
|
|
#define ADM1025_ALARM_RTEMP 0x0020
|
|
#define ADM1025_ALARM_TEMP 0x0010
|
|
|
|
#define LTC1710_SYSCTL_SWITCH_1 1000
|
|
#define LTC1710_SYSCTL_SWITCH_2 1001
|
|
|
|
#define LM80_ALARM_IN0 0x0001
|
|
#define LM80_ALARM_IN1 0x0002
|
|
#define LM80_ALARM_IN2 0x0004
|
|
#define LM80_ALARM_IN3 0x0008
|
|
#define LM80_ALARM_IN4 0x0010
|
|
#define LM80_ALARM_IN5 0x0020
|
|
#define LM80_ALARM_IN6 0x0040
|
|
#define LM80_ALARM_FAN1 0x0400
|
|
#define LM80_ALARM_FAN2 0x0800
|
|
#define LM80_ALARM_TEMP_HOT 0x0100
|
|
#define LM80_ALARM_TEMP_OS 0x2000
|
|
#define LM80_ALARM_CHAS 0x1000
|
|
#define LM80_ALARM_BTI 0x0200
|
|
#define LM80_ALARM_INT_IN 0x0080
|
|
|
|
#define MAXI_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define MAXI_SYSCTL_FAN2 1102 /* Rotations/min */
|
|
#define MAXI_SYSCTL_FAN3 1103 /* Rotations/min */
|
|
#define MAXI_SYSCTL_FAN4 1104 /* Rotations/min */
|
|
#define MAXI_SYSCTL_TEMP1 1201 /* Degrees Celcius */
|
|
#define MAXI_SYSCTL_TEMP2 1202 /* Degrees Celcius */
|
|
#define MAXI_SYSCTL_TEMP3 1203 /* Degrees Celcius */
|
|
#define MAXI_SYSCTL_TEMP4 1204 /* Degrees Celcius */
|
|
#define MAXI_SYSCTL_TEMP5 1205 /* Degrees Celcius */
|
|
#define MAXI_SYSCTL_TEMP6 1206 /* Degrees Celcius */
|
|
#define MAXI_SYSCTL_PLL 1301 /* MHz */
|
|
#define MAXI_SYSCTL_VID1 1401 /* Volts / 6.337, for nba just Volts */
|
|
#define MAXI_SYSCTL_VID2 1402 /* Volts */
|
|
#define MAXI_SYSCTL_VID3 1403 /* Volts */
|
|
#define MAXI_SYSCTL_VID4 1404 /* Volts */
|
|
#define MAXI_SYSCTL_VID5 1405 /* Volts */
|
|
#define MAXI_SYSCTL_LCD1 1501 /* Line 1 of LCD */
|
|
#define MAXI_SYSCTL_LCD2 1502 /* Line 2 of LCD */
|
|
#define MAXI_SYSCTL_LCD3 1503 /* Line 3 of LCD */
|
|
#define MAXI_SYSCTL_LCD4 1504 /* Line 4 of LCD */
|
|
#define MAXI_SYSCTL_ALARMS 2001 /* Bitvector (see below) */
|
|
|
|
#define MAXI_ALARM_VID4 0x0001
|
|
#define MAXI_ALARM_TEMP2 0x0002
|
|
#define MAXI_ALARM_VID1 0x0004
|
|
#define MAXI_ALARM_VID2 0x0008
|
|
#define MAXI_ALARM_VID3 0x0010
|
|
#define MAXI_ALARM_PLL 0x0080
|
|
#define MAXI_ALARM_TEMP4 0x0100
|
|
#define MAXI_ALARM_TEMP5 0x0200
|
|
#define MAXI_ALARM_FAN1 0x1000
|
|
#define MAXI_ALARM_FAN2 0x2000
|
|
#define MAXI_ALARM_FAN3 0x4000
|
|
|
|
#define MAXI_ALARM_FAN 0x0100 /* To be used with MaxiLife'99 */
|
|
#define MAXI_ALARM_VID 0x0200 /* The MSB specifies which sensor */
|
|
#define MAXI_ALARM_TEMP 0x0400 /* in the alarm group failed, i.e.: */
|
|
#define MAXI_ALARM_VADD 0x0800 /* 0x0402 = TEMP2 failed = CPU2 temp */
|
|
|
|
#define SIS5595_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define SIS5595_SYSCTL_IN1 1001
|
|
#define SIS5595_SYSCTL_IN2 1002
|
|
#define SIS5595_SYSCTL_IN3 1003
|
|
#define SIS5595_SYSCTL_IN4 1004
|
|
#define SIS5595_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define SIS5595_SYSCTL_FAN2 1102
|
|
#define SIS5595_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
|
|
#define SIS5595_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define SIS5595_SYSCTL_ALARMS 2001 /* bitvector */
|
|
|
|
#define SIS5595_ALARM_IN0 0x01
|
|
#define SIS5595_ALARM_IN1 0x02
|
|
#define SIS5595_ALARM_IN2 0x04
|
|
#define SIS5595_ALARM_IN3 0x08
|
|
#define SIS5595_ALARM_BTI 0x20
|
|
#define SIS5595_ALARM_FAN1 0x40
|
|
#define SIS5595_ALARM_FAN2 0x80
|
|
#define SIS5595_ALARM_IN4 0x8000
|
|
#define SIS5595_ALARM_TEMP 0x8000
|
|
|
|
#define VIA686A_SYSCTL_IN0 1000
|
|
#define VIA686A_SYSCTL_IN1 1001
|
|
#define VIA686A_SYSCTL_IN2 1002
|
|
#define VIA686A_SYSCTL_IN3 1003
|
|
#define VIA686A_SYSCTL_IN4 1004
|
|
#define VIA686A_SYSCTL_FAN1 1101
|
|
#define VIA686A_SYSCTL_FAN2 1102
|
|
#define VIA686A_SYSCTL_TEMP 1200
|
|
#define VIA686A_SYSCTL_TEMP2 1201
|
|
#define VIA686A_SYSCTL_TEMP3 1202
|
|
#define VIA686A_SYSCTL_FAN_DIV 2000
|
|
#define VIA686A_SYSCTL_ALARMS 2001
|
|
|
|
#define VIA686A_ALARM_IN0 0x01
|
|
#define VIA686A_ALARM_IN1 0x02
|
|
#define VIA686A_ALARM_IN2 0x04
|
|
#define VIA686A_ALARM_IN3 0x08
|
|
#define VIA686A_ALARM_TEMP 0x10
|
|
#define VIA686A_ALARM_FAN1 0x40
|
|
#define VIA686A_ALARM_FAN2 0x80
|
|
#define VIA686A_ALARM_IN4 0x100
|
|
#define VIA686A_ALARM_TEMP2 0x800
|
|
#define VIA686A_ALARM_CHAS 0x1000
|
|
#define VIA686A_ALARM_TEMP3 0x8000
|
|
|
|
#define ICSPLL_SYSCTL1 1000
|
|
|
|
#define BT869_SYSCTL_STATUS 1000
|
|
#define BT869_SYSCTL_NTSC 1001
|
|
#define BT869_SYSCTL_HALF 1002
|
|
#define BT869_SYSCTL_RES 1003
|
|
#define BT869_SYSCTL_COLORBARS 1004
|
|
#define BT869_SYSCTL_DEPTH 1005
|
|
|
|
#define MATORB_SYSCTL_DISP 1000
|
|
|
|
#define THMC50_SYSCTL_TEMP 1200 /* Degrees Celcius */
|
|
#define THMC50_SYSCTL_REMOTE_TEMP 1201 /* Degrees Celcius */
|
|
#define THMC50_SYSCTL_INTER 1202
|
|
#define THMC50_SYSCTL_INTER_MASK 1203
|
|
#define THMC50_SYSCTL_DIE_CODE 1204
|
|
#define THMC50_SYSCTL_ANALOG_OUT 1205
|
|
|
|
#define DDCMON_SYSCTL_ID 1010
|
|
#define DDCMON_SYSCTL_SIZE 1011
|
|
#define DDCMON_SYSCTL_SYNC 1012
|
|
#define DDCMON_SYSCTL_TIMINGS 1013
|
|
#define DDCMON_SYSCTL_SERIAL 1014
|
|
|
|
#define LM87_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define LM87_SYSCTL_IN1 1001
|
|
#define LM87_SYSCTL_IN2 1002
|
|
#define LM87_SYSCTL_IN3 1003
|
|
#define LM87_SYSCTL_IN4 1004
|
|
#define LM87_SYSCTL_IN5 1005
|
|
#define LM87_SYSCTL_AIN1 1006
|
|
#define LM87_SYSCTL_AIN2 1007
|
|
#define LM87_SYSCTL_FAN1 1102
|
|
#define LM87_SYSCTL_FAN2 1103
|
|
#define LM87_SYSCTL_TEMP1 1250 /* Degrees Celcius * 100 */
|
|
#define LM87_SYSCTL_TEMP2 1251 /* Degrees Celcius * 100 */
|
|
#define LM87_SYSCTL_TEMP3 1252 /* Degrees Celcius * 100 */
|
|
#define LM87_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define LM87_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define LM87_SYSCTL_ANALOG_OUT 2002
|
|
#define LM87_SYSCTL_VID 2003
|
|
|
|
#define LM87_ALARM_IN0 0x0001
|
|
#define LM87_ALARM_IN1 0x0002
|
|
#define LM87_ALARM_IN2 0x0004
|
|
#define LM87_ALARM_IN3 0x0008
|
|
#define LM87_ALARM_TEMP1 0x0010
|
|
#define LM87_ALARM_TEMP2 0x0020
|
|
#define LM87_ALARM_TEMP3 0x0020 /* same?? */
|
|
#define LM87_ALARM_FAN1 0x0040
|
|
#define LM87_ALARM_FAN2 0x0080
|
|
#define LM87_ALARM_IN4 0x0100
|
|
#define LM87_ALARM_IN5 0x0200
|
|
#define LM87_ALARM_RESERVED1 0x0400
|
|
#define LM87_ALARM_RESERVED2 0x0800
|
|
#define LM87_ALARM_CHAS 0x1000
|
|
#define LM87_ALARM_THERM_SIG 0x2000
|
|
#define LM87_ALARM_TEMP2_FAULT 0x4000
|
|
#define LM87_ALARM_TEMP3_FAULT 0x08000
|
|
|
|
#define PCF8574_SYSCTL_STAT 1000
|
|
|
|
#define MTP008_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define MTP008_SYSCTL_IN1 1001
|
|
#define MTP008_SYSCTL_IN2 1002
|
|
#define MTP008_SYSCTL_IN3 1003
|
|
#define MTP008_SYSCTL_IN4 1004
|
|
#define MTP008_SYSCTL_IN5 1005
|
|
#define MTP008_SYSCTL_IN6 1006
|
|
#define MTP008_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define MTP008_SYSCTL_FAN2 1102
|
|
#define MTP008_SYSCTL_FAN3 1103
|
|
#define MTP008_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
|
|
#define MTP008_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
|
|
#define MTP008_SYSCTL_TEMP3 1202 /* Degrees Celcius * 10 */
|
|
#define MTP008_SYSCTL_VID 1300 /* Volts * 100 */
|
|
#define MTP008_SYSCTL_PWM1 1401
|
|
#define MTP008_SYSCTL_PWM2 1402
|
|
#define MTP008_SYSCTL_PWM3 1403
|
|
#define MTP008_SYSCTL_SENS1 1501 /* 1, 2, or Beta (3000-5000) */
|
|
#define MTP008_SYSCTL_SENS2 1502
|
|
#define MTP008_SYSCTL_SENS3 1503
|
|
#define MTP008_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define MTP008_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define MTP008_SYSCTL_BEEP 2002 /* bitvector */
|
|
|
|
#define MTP008_ALARM_IN0 0x0001
|
|
#define MTP008_ALARM_IN1 0x0002
|
|
#define MTP008_ALARM_IN2 0x0004
|
|
#define MTP008_ALARM_IN3 0x0008
|
|
#define MTP008_ALARM_IN4 0x0100
|
|
#define MTP008_ALARM_IN5 0x0200
|
|
#define MTP008_ALARM_IN6 0x0400
|
|
#define MTP008_ALARM_FAN1 0x0040
|
|
#define MTP008_ALARM_FAN2 0x0080
|
|
#define MTP008_ALARM_FAN3 0x0800
|
|
#define MTP008_ALARM_TEMP1 0x0010
|
|
#define MTP008_ALARM_TEMP2 0x0100
|
|
#define MTP008_ALARM_TEMP3 0x0200
|
|
|
|
#define DS1621_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
|
|
#define DS1621_SYSCTL_ALARMS 2001 /* bitvector */
|
|
#define DS1621_ALARM_TEMP_HIGH 0x40
|
|
#define DS1621_ALARM_TEMP_LOW 0x20
|
|
#define DS1621_SYSCTL_ENABLE 2002
|
|
#define DS1621_SYSCTL_CONTINUOUS 2003
|
|
#define DS1621_SYSCTL_POLARITY 2004
|
|
|
|
#define IT87_SYSCTL_IN0 1000 /* Volts * 100 */
|
|
#define IT87_SYSCTL_IN1 1001
|
|
#define IT87_SYSCTL_IN2 1002
|
|
#define IT87_SYSCTL_IN3 1003
|
|
#define IT87_SYSCTL_IN4 1004
|
|
#define IT87_SYSCTL_IN5 1005
|
|
#define IT87_SYSCTL_IN6 1006
|
|
#define IT87_SYSCTL_IN7 1007
|
|
#define IT87_SYSCTL_IN8 1008
|
|
#define IT87_SYSCTL_FAN1 1101 /* Rotations/min */
|
|
#define IT87_SYSCTL_FAN2 1102
|
|
#define IT87_SYSCTL_FAN3 1103
|
|
#define IT87_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
|
|
#define IT87_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
|
|
#define IT87_SYSCTL_TEMP3 1202 /* Degrees Celcius * 10 */
|
|
#define IT87_SYSCTL_VID 1300 /* Volts * 100 */
|
|
#define IT87_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
|
|
#define IT87_SYSCTL_ALARMS_FAN 2001 /* bitvector */
|
|
#define IT87_SYSCTL_ALARMS_VIN 2002 /* bitvector */
|
|
#define IT87_SYSCTL_ALARMS_TEMP 2003 /* bitvector */
|
|
|
|
#define IT87_ALARM_IN0 0x0001
|
|
#define IT87_ALARM_IN1 0x0002
|
|
#define IT87_ALARM_IN2 0x0004
|
|
#define IT87_ALARM_IN3 0x0008
|
|
#define IT87_ALARM_IN4 0x0010
|
|
#define IT87_ALARM_IN5 0x0020
|
|
#define IT87_ALARM_IN6 0x0040
|
|
#define IT87_ALARM_IN7 0x0080
|
|
#define IT87_ALARM_FAN1 0x0001
|
|
#define IT87_ALARM_FAN2 0x0002
|
|
#define IT87_ALARM_FAN3 0x0004
|
|
#define IT87_ALARM_TEMP1 0x0001
|
|
#define IT87_ALARM_TEMP2 0x0002
|
|
#define IT87_ALARM_TEMP3 0x0004
|
|
|
|
#endif /* def SENSORS_SENSORS_H */
|