Files
lm-sensors/TODO
T
1998-12-07 23:57:51 +00:00

31 lines
1.6 KiB
Plaintext

Many, many things. Most notably:
* Support 10-bit addresses. At this moment, they are supported nowhere, except
in Simon Vogl's i2c modules.
* Change the i2c modules to keep the namespace clean (EXPORT_SYMBOL does not
work for us; many static declarations need to be added; better ask Simon
Vogl first)
* Make it SMP-safe: there are no spinlocks yet. They are needed at many
places, probably (everywhere where global vars are accessed). This must be
done for the i2c modules, too.
* Extend sensors.c with a file /proc/sys/dev/sensors/chips, which lists
all directories under /proc/sys/dev/sensors with their SYSCTL id
(needed for good sysctl access).
* Extend the mod_inc_use/mod_dec_use through the fill_inode trick, for all
new /proc files.
* Make lm78.c detect 'double hits', (same chip connected to both SMBus and
ISA).
* Better lm78/lm75 detection; insmod-time paramters to set addresses
(difficult, because of all i2c busses!).
* Registrate which i2c addresses are used (a la ISA) for each adapter.
* Rename i2c-proc.c to i2c-user.c, and extend it with /dev entries;
or, create a better i2c-dev.c, that understands SMBus commands.
* Write all other drivers
* How to make drivers detect thing *not*; for example, if a Winbond is
present, the LM75 driver should not try to access its simulated
LM75 chips (in this case, simply disable them - but what if the LM75
driver was loaded first?).
* Write a userland-library for SMBus/i2c access (through the /dev interface)
* Write a userland detection program for busses (clients are less important;
but perhaps needed too).