wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-16 10:49:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
d4cf6b4a6fa75cb4e4b73c41ae583ff4bc044af2
lm-sensors/kernel/chips/via686a.c
T
Frodo Looijaard aa0c8f6768 Updated the MUTEX definitions again - they are now guarded by 
the horrible
         #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
             (LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
        They should now both work with 2.3 kernels (including 2.4 prepatches)
        and very new 2.2 kernels (ie. 2.2.18 prepatches)


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-11-22 23:54:39 +00:00

964 lines
33 KiB
C
Raw Blame History

/*
via686a.c - Part of lm_sensors, Linux kernel modules
for hardware monitoring
Copyright (c) 1998, 1999,2000 Frodo Looijaard <frodol@dds.nl>,
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark Studebaker <mdsxyz123@yahoo.com>,
and Bob Dougherty <bobd@stanford.edu>
(Some conversion-factor data were contributed by Jonathan Teh Soon Yew
<j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/malloc.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/sysctl.h>
#include <linux/pci.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include "version.h"
#include "i2c-isa.h"
#include "sensors.h"
#include <linux/init.h>
#ifndef PCI_DEVICE_ID_VIA_82C686_4
#define PCI_DEVICE_ID_VIA_82C686_4 0x3057
#endif
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
#define init_MUTEX(s) do { *(s) = MUTEX; } while(0)
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)
#define THIS_MODULE NULL
#endif
/* Addresses to scan.
Note that we can't determine the ISA address until we have initialized
our module */
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { SENSORS_I2C_END };
static unsigned int normal_isa[] = { 0x0000, SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_1(via686a);
/*
The Via 686a southbridge has a LM78-like chip integrated on the same IC.
This driver is a customized copy of lm78.c
*/
/* Many VIA686A constants specified below */
/* Length of ISA address segment */
#define VIA686A_EXTENT 0x80
#define VIA686A_BASE_REG 0x70
#define VIA686A_ENABLE_REG 0x74
/* The VIA686A registers */
/* ins numbered 0-4 */
#define VIA686A_REG_IN_MAX(nr) (0x2b + ((nr) * 2))
#define VIA686A_REG_IN_MIN(nr) (0x2c + ((nr) * 2))
#define VIA686A_REG_IN(nr) (0x22 + (nr))
/* fans numbered 1-2 */
#define VIA686A_REG_FAN_MIN(nr) (0x3a + (nr))
#define VIA686A_REG_FAN(nr) (0x28 + (nr))
// the following values are as speced by VIA:
static const u8 regtemp[] = { 0x20, 0x21, 0x1f };
static const u8 regover[] = { 0x39, 0x3d, 0x1d };
static const u8 reghyst[] = { 0x3a, 0x3e, 0x1e };
/* temps numbered 1-3 */
#define VIA686A_REG_TEMP(nr) (regtemp[(nr) - 1])
#define VIA686A_REG_TEMP_OVER(nr) (regover[(nr) - 1])
#define VIA686A_REG_TEMP_HYST(nr) (reghyst[(nr) - 1])
#define VIA686A_REG_TEMP_LOW1 0x4b // bits 7-6
#define VIA686A_REG_TEMP_LOW23 0x49 // 2 = bits 5-4, 3 = bits 7-6
#define VIA686A_REG_ALARM1 0x41
#define VIA686A_REG_ALARM2 0x42
#define VIA686A_REG_FANDIV 0x47
#define VIA686A_REG_CONFIG 0x40
// The following register sets temp interrupt mode (bits 1-0 for temp1,
// 3-2 for temp2, 5-4 for temp3). Modes are:
// 00 interrupt stays as long as value is out-of-range
// 01 interrupt is cleared once register is read (default)
// 10 comparator mode- like 00, but ignores hysteresis
// 11 same as 00
#define VIA686A_REG_TEMP_MODE 0x4b
// We'll just assume that you want to set all 3 simulataneously:
#define VIA686A_TEMP_MODE_MASK 0x3F
#define VIA686A_TEMP_MODE_CONTINUOUS (0x00)
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. */
/********* VOLTAGE CONVERSIONS (Bob Dougherty) ********/
// From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
// voltagefactor[0]=1.25/2628; (2628/1.25=2102.4) // Vccp
// voltagefactor[1]=1.25/2628; (2628/1.25=2102.4) // +2.5V
// voltagefactor[2]=1.67/2628; (2628/1.67=1573.7) // +3.3V
// voltagefactor[3]=2.6/2628; (2628/2.60=1010.8) // +5V
// voltagefactor[4]=6.3/2628; (2628/6.30=417.14) // +12V
// in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
// That is:
// volts = (25*regVal+133)*factor
// regVal = (volts/factor-133)/25
// (These conversions were contributed by Jonathan Teh Soon Yew
// <j.teh@iname.com>)
//
// These get us close, but they don't completely agree with what my BIOS
// says- they are all a bit low. But, it all we have to go on...
extern inline u8 IN_TO_REG(long val, int inNum)
{
// to avoid floating point, we multiply everything by 100.
// val is guaranteed to be positive, so we can achieve the effect of
// rounding by (...*10+5)/10. Note that the *10 is hidden in the
// /250 (which should really be /2500).
// At the end, we need to /100 because we *100 everything and we need
// to /10 because of the rounding thing, so we /1000.
if (inNum <= 1)
return (u8)
SENSORS_LIMIT(((val * 210240 - 13300) / 250 + 5) / 1000,
0, 255);
else if (inNum == 2)
return (u8)
SENSORS_LIMIT(((val * 157370 - 13300) / 250 + 5) / 1000,
0, 255);
else if (inNum == 3)
return (u8)
SENSORS_LIMIT(((val * 101080 - 13300) / 250 + 5) / 1000,
0, 255);
else
return (u8) SENSORS_LIMIT(((val * 41714 - 13300) / 250 + 5)
/ 1000, 0, 255);
}
extern inline long IN_FROM_REG(u8 val, int inNum)
{
// to avoid floating point, we multiply everything by 100.
// val is guaranteed to be positive, so we can achieve the effect of
// rounding by adding 0.5. Or, to avoid fp math, we do (...*10+5)/10.
// We need to scale with *100 anyway, so no need to /100 at the end.
if (inNum <= 1)
return (long) (((250000 * val + 13300) / 210240 * 10 + 5) /10);
else if (inNum == 2)
return (long) (((250000 * val + 13300) / 157370 * 10 + 5) /10);
else if (inNum == 3)
return (long) (((250000 * val + 13300) / 101080 * 10 + 5) /10);
else
return (long) (((250000 * val + 13300) / 41714 * 10 + 5) /10);
}
/********* FAN RPM CONVERSIONS ********/
// Higher register values = slower fans (the fan's strobe gates a counter).
// But this chip saturates back at 0, not at 255 like all the other chips.
// So, 0 means 0 RPM
extern inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm == 0)
return 0;
rpm = SENSORS_LIMIT(rpm, 1, 1000000);
return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
}
#define FAN_FROM_REG(val,div) ((val)==0?0:(val)==255?0:1350000/((val)*(div)))
/******** TEMP CONVERSIONS (Bob Dougherty) *********/
// linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
// if(temp<169)
// return double(temp)*0.427-32.08;
// else if(temp>=169 && temp<=202)
// return double(temp)*0.582-58.16;
// else
// return double(temp)*0.924-127.33;
//
// A fifth-order polynomial fits the unofficial data (provided by Alex van
// Kaam <darkside@chello.nl>) a bit better. It also give more reasonable
// numbers on my machine (ie. they agree with what my BIOS tells me).
// Here's the fifth-order fit to the 8-bit data:
// temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 -
// 2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
//
// (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for
// finding my typos in this formula!)
//
// Alas, none of the elegant function-fit solutions will work because we
// aren't allowed to use floating point in the kernel and doing it with
// integers doesn't rpovide enough precision. So we'll do boring old
// look-up table stuff. The unofficial data (see below) have effectively
// 7-bit resolution (they are rounded to the nearest degree). I'm assuming
// that the transfer function of the device is monotonic and smooth, so a
// smooth function fit to the data will allow us to get better precision.
// I used the 5th-order poly fit described above and solved for
// VIA register values 0-255. I *10 before rounding, so we get tenth-degree
// precision. (I could have done all 1024 values for our 10-bit readings,
// but the function is very linear in the useful range (0-80 deg C), so
// we'll just use linear interpolation for 10-bit readings.) So, tempLUT
// is the temp at via register values 0-255:
static const long tempLUT[] =
{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
-255, -246, -237, -229, -220, -212, -204, -196, -188, -180,
-173, -166, -159, -152, -145, -139, -132, -126, -120, -114,
-108, -102, -96, -91, -85, -80, -74, -69, -64, -59, -54, -49,
-44, -39, -34, -29, -25, -20, -15, -11, -6, -2, 3, 7, 12, 16,
20, 25, 29, 33, 37, 42, 46, 50, 54, 59, 63, 67, 71, 75, 79, 84,
88, 92, 96, 100, 104, 109, 113, 117, 121, 125, 130, 134, 138,
142, 146, 151, 155, 159, 163, 168, 172, 176, 181, 185, 189,
193, 198, 202, 206, 211, 215, 219, 224, 228, 232, 237, 241,
245, 250, 254, 259, 263, 267, 272, 276, 281, 285, 290, 294,
299, 303, 307, 312, 316, 321, 325, 330, 334, 339, 344, 348,
353, 357, 362, 366, 371, 376, 380, 385, 390, 395, 399, 404,
409, 414, 419, 423, 428, 433, 438, 443, 449, 454, 459, 464,
469, 475, 480, 486, 491, 497, 502, 508, 514, 520, 526, 532,
538, 544, 551, 557, 564, 571, 578, 584, 592, 599, 606, 614,
621, 629, 637, 645, 654, 662, 671, 680, 689, 698, 708, 718,
728, 738, 749, 759, 770, 782, 793, 805, 818, 830, 843, 856,
870, 883, 898, 912, 927, 943, 958, 975, 991, 1008, 1026, 1044,
1062, 1081, 1101, 1121, 1141, 1162, 1184, 1206, 1229, 1252,
1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462
};
/* the original LUT values from Alex van Kaam <darkside@chello.nl>
(for via register values 12-240):
{-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
-30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
-15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
-3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
*/
// Here's the reverse LUT. I got it by doing a 6-th order poly fit (needed
// an extra term for a good fit to these inverse data!) and then
// solving for each temp value from -50 to 110 (the useable range for
// this chip). Here's the fit:
// viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4
// - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
// Note that n=161:
static const u8 viaLUT[] =
{ 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40,
41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66,
69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100,
103, 105, 107, 110, 112, 115, 117, 119, 122, 124, 126, 129,
131, 134, 136, 138, 140, 143, 145, 147, 150, 152, 154, 156,
158, 160, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180,
182, 183, 185, 187, 188, 190, 192, 193, 195, 196, 198, 199,
200, 202, 203, 205, 206, 207, 208, 209, 210, 211, 212, 213,
214, 215, 216, 217, 218, 219, 220, 221, 222, 222, 223, 224,
225, 226, 226, 227, 228, 228, 229, 230, 230, 231, 232, 232,
233, 233, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
239, 240
};
/* Converting temps to (8-bit) hyst and over registers */
// No interpolation here. Just check the limits and go.
// The +5 effectively rounds off properly and the +50 is because
// the temps start at -50
extern inline u8 TEMP_TO_REG(long val)
{
return (u8)
SENSORS_LIMIT(viaLUT[((val <= -500) ? 0 : (val >= 1100) ? 160 :
((val + 5) / 10 + 50))], 0, 255);
}
/* for 8-bit temperature hyst and over registers */
// The temp values are already *10, so we don't need to do that.
// But we _will_ round these off to the nearest degree with (...*10+5)/10
#define TEMP_FROM_REG(val) ((tempLUT[(val)]*10+5)/10)
/* for 10-bit temperature readings */
// You might _think_ this is too long to inline, but's it's really only
// called once...
extern inline long TEMP_FROM_REG10(u16 val)
{
// the temp values are already *10, so we don't need to do that.
long temp;
u16 eightBits = val >> 2;
u16 twoBits = val & 3;
// handle the extremes first (they won't interpolate well! ;-)
if (val == 0)
return (long) tempLUT[0];
if (val == 1023)
return (long) tempLUT[255];
if (twoBits == 0)
return (long) tempLUT[eightBits];
else {
// do some interpolation by multipying the lower and upper
// bounds by 25, 50 or 75, then /100.
temp = ((25 * (4 - twoBits)) * tempLUT[eightBits]
+ (25 * twoBits) * tempLUT[eightBits + 1]);
// increase the magnitude by 50 to achieve rounding.
if (temp > 0)
temp += 50;
else
temp -= 50;
return (temp / 100);
}
}
#define ALARMS_FROM_REG(val) (val)
#define DIV_FROM_REG(val) (1 << (val))
#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
/* Initial limits */
#define VIA686A_INIT_IN_0 200
#define VIA686A_INIT_IN_1 250
#define VIA686A_INIT_IN_2 330
#define VIA686A_INIT_IN_3 500
#define VIA686A_INIT_IN_4 1200
#define VIA686A_INIT_IN_PERCENTAGE 10
#define VIA686A_INIT_IN_MIN_0 (VIA686A_INIT_IN_0 - VIA686A_INIT_IN_0 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MAX_0 (VIA686A_INIT_IN_0 + VIA686A_INIT_IN_0 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MIN_1 (VIA686A_INIT_IN_1 - VIA686A_INIT_IN_1 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MAX_1 (VIA686A_INIT_IN_1 + VIA686A_INIT_IN_1 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MIN_2 (VIA686A_INIT_IN_2 - VIA686A_INIT_IN_2 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MAX_2 (VIA686A_INIT_IN_2 + VIA686A_INIT_IN_2 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MIN_3 (VIA686A_INIT_IN_3 - VIA686A_INIT_IN_3 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MAX_3 (VIA686A_INIT_IN_3 + VIA686A_INIT_IN_3 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MIN_4 (VIA686A_INIT_IN_4 - VIA686A_INIT_IN_4 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_IN_MAX_4 (VIA686A_INIT_IN_4 + VIA686A_INIT_IN_4 \
* VIA686A_INIT_IN_PERCENTAGE / 100)
#define VIA686A_INIT_FAN_MIN 3000
#define VIA686A_INIT_TEMP_OVER 600
#define VIA686A_INIT_TEMP_HYST 500
#ifdef MODULE
extern int init_module(void);
extern int cleanup_module(void);
#endif /* MODULE */
/* This module may seem overly long and complicated. In fact, it is not so
bad. Quite a lot of bookkeeping is done. A real driver can often cut
some corners. */
/* For each registered VIA686A, we need to keep some data in memory. That
data is pointed to by via686a_list[NR]->data. The structure itself is
dynamically allocated, at the same time when a new via686a client is
allocated. */
struct via686a_data {
struct semaphore lock;
int sysctl_id;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 in[5]; /* Register value */
u8 in_max[5]; /* Register value */
u8 in_min[5]; /* Register value */
u8 fan[2]; /* Register value */
u8 fan_min[2]; /* Register value */
u16 temp[3]; /* Register value 10 bit */
u8 temp_over[3]; /* Register value */
u8 temp_hyst[3]; /* Register value */
u8 fan_div[2]; /* Register encoding, shifted right */
u16 alarms; /* Register encoding, combined */
};
#ifdef MODULE
static
#else
extern
#endif
int __init sensors_via686a_init(void);
static int __init via686a_cleanup(void);
static int via686a_attach_adapter(struct i2c_adapter *adapter);
static int via686a_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind);
static int via686a_detach_client(struct i2c_client *client);
static int via686a_command(struct i2c_client *client, unsigned int cmd,
void *arg);
static void via686a_inc_use(struct i2c_client *client);
static void via686a_dec_use(struct i2c_client *client);
static int via686a_read_value(struct i2c_client *client, u8 register);
static void via686a_write_value(struct i2c_client *client, u8 register,
u8 value);
static void via686a_update_client(struct i2c_client *client);
static void via686a_init_client(struct i2c_client *client);
static int via686a_find(int *address);
static void via686a_in(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void via686a_fan(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void via686a_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void via686a_alarms(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void via686a_fan_div(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static int via686a_id = 0;
/* The driver. I choose to use type i2c_driver, as at is identical to both
smbus_driver and isa_driver, and clients could be of either kind */
static struct i2c_driver via686a_driver = {
/* name */ "VIA 686A",
/* id */ I2C_DRIVERID_VIA686A,
/* flags */ I2C_DF_NOTIFY,
/* attach_adapter */ &via686a_attach_adapter,
/* detach_client */ &via686a_detach_client,
/* command */ &via686a_command,
/* inc_use */ &via686a_inc_use,
/* dec_use */ &via686a_dec_use
};
/* Used by via686a_init/cleanup */
static int __initdata via686a_initialized = 0;
/* The /proc/sys entries */
/* These files are created for each detected VIA686A. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table via686a_dir_table_template[] = {
{VIA686A_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_in},
{VIA686A_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_in},
{VIA686A_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_in},
{VIA686A_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_in},
{VIA686A_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_in},
{VIA686A_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_fan},
{VIA686A_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_fan},
{VIA686A_SYSCTL_TEMP, "temp1", NULL, 0, 0644, NULL, &sensors_proc_real,
&sensors_sysctl_real, NULL, &via686a_temp},
{VIA686A_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL,
&sensors_proc_real, &sensors_sysctl_real, NULL, &via686a_temp},
{VIA686A_SYSCTL_TEMP3, "temp3", NULL, 0, 0644, NULL,
&sensors_proc_real, &sensors_sysctl_real, NULL, &via686a_temp},
{VIA686A_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL,
&sensors_proc_real, &sensors_sysctl_real, NULL, &via686a_fan_div},
{VIA686A_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL,
&sensors_proc_real, &sensors_sysctl_real, NULL, &via686a_alarms},
{0}
};
static inline int via686a_read_value(struct i2c_client *client, u8 reg)
{
return (inb_p(client->addr + reg));
}
static inline void via686a_write_value(struct i2c_client *client, u8 reg,
u8 value)
{
outb_p(value, client->addr + reg);
}
/* This is called when the module is loaded */
int via686a_attach_adapter(struct i2c_adapter *adapter)
{
return sensors_detect(adapter, &addr_data, via686a_detect);
}
/* Locate chip and get correct base address */
int via686a_find(int *address)
{
struct pci_dev *s_bridge;
u16 val;
if (!pci_present())
return -ENODEV;
if (!(s_bridge = pci_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C686_4,
NULL))) return -ENODEV;
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(s_bridge, VIA686A_BASE_REG, &val))
return -ENODEV;
*address = (val & 0xff80);
if (*address == 0) {
printk("via686a.o: sensors not enabled - upgrade BIOS?\n");
return -ENODEV;
}
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
return -ENODEV;
if (!(val & 0x01)) {
printk("via686a.o: enabling sensors\n");
pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
val | 0x01);
}
return 0;
}
int via686a_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind)
{
int i;
struct i2c_client *new_client;
struct via686a_data *data;
int err = 0;
const char *type_name = "via686a";
/* Make sure we are probing the ISA bus!! */
if (!i2c_is_isa_adapter(adapter)) {
printk
("via686a.o: via686a_detect called for an I2C bus adapter?!?\n");
return 0;
}
if (check_region(address, VIA686A_EXTENT)) {
printk("via686a.o: region 0x%x already in use!\n",
address);
err = -ENODEV;
goto ERROR0;
}
if (!(new_client = kmalloc(sizeof(struct i2c_client) +
sizeof(struct via686a_data),
GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
data = (struct via686a_data *) (new_client + 1);
new_client->addr = address;
init_MUTEX(&data->lock);
new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &via686a_driver;
new_client->flags = 0;
/* Reserve the ISA region */
request_region(address, VIA686A_EXTENT, type_name);
/* Fill in the remaining client fields and put into the global list */
strcpy(new_client->name, "Via 686A Integrated Sensors");
new_client->id = via686a_id++;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((i = sensors_register_entry((struct i2c_client *) new_client,
type_name,
via686a_dir_table_template,
THIS_MODULE)) < 0) {
err = i;
goto ERROR4;
}
data->sysctl_id = i;
/* Initialize the VIA686A chip */
via686a_init_client(new_client);
return 0;
ERROR4:
i2c_detach_client(new_client);
ERROR3:
release_region(address, VIA686A_EXTENT);
kfree(new_client);
ERROR0:
return err;
}
int via686a_detach_client(struct i2c_client *client)
{
int err;
sensors_deregister_entry(((struct via686a_data *)
(client->data))->sysctl_id);
if ((err = i2c_detach_client(client))) {
printk
("via686a.o: Client deregistration failed, client not detached.\n");
return err;
}
release_region(client->addr, VIA686A_EXTENT);
kfree(client);
return 0;
}
/* No commands defined yet */
int via686a_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
return 0;
}
void via686a_inc_use(struct i2c_client *client)
{
MOD_INC_USE_COUNT;
}
void via686a_dec_use(struct i2c_client *client)
{
MOD_DEC_USE_COUNT;
}
/* Called when we have found a new VIA686A. Set limits, etc. */
void via686a_init_client(struct i2c_client *client)
{
int i;
/* Reset the device */
via686a_write_value(client, VIA686A_REG_CONFIG, 0x80);
via686a_write_value(client, VIA686A_REG_IN_MIN(0),
IN_TO_REG(VIA686A_INIT_IN_MIN_0, 0));
via686a_write_value(client, VIA686A_REG_IN_MAX(0),
IN_TO_REG(VIA686A_INIT_IN_MAX_0, 0));
via686a_write_value(client, VIA686A_REG_IN_MIN(1),
IN_TO_REG(VIA686A_INIT_IN_MIN_1, 1));
via686a_write_value(client, VIA686A_REG_IN_MAX(1),
IN_TO_REG(VIA686A_INIT_IN_MAX_1, 1));
via686a_write_value(client, VIA686A_REG_IN_MIN(2),
IN_TO_REG(VIA686A_INIT_IN_MIN_2, 2));
via686a_write_value(client, VIA686A_REG_IN_MAX(2),
IN_TO_REG(VIA686A_INIT_IN_MAX_2, 2));
via686a_write_value(client, VIA686A_REG_IN_MIN(3),
IN_TO_REG(VIA686A_INIT_IN_MIN_3, 3));
via686a_write_value(client, VIA686A_REG_IN_MAX(3),
IN_TO_REG(VIA686A_INIT_IN_MAX_3, 3));
via686a_write_value(client, VIA686A_REG_IN_MIN(4),
IN_TO_REG(VIA686A_INIT_IN_MIN_4, 4));
via686a_write_value(client, VIA686A_REG_IN_MAX(4),
IN_TO_REG(VIA686A_INIT_IN_MAX_4, 4));
via686a_write_value(client, VIA686A_REG_FAN_MIN(1),
FAN_TO_REG(VIA686A_INIT_FAN_MIN, 2));
via686a_write_value(client, VIA686A_REG_FAN_MIN(2),
FAN_TO_REG(VIA686A_INIT_FAN_MIN, 2));
for (i = 1; i <= 3; i++) {
via686a_write_value(client, VIA686A_REG_TEMP_OVER(i),
TEMP_TO_REG(VIA686A_INIT_TEMP_OVER));
via686a_write_value(client, VIA686A_REG_TEMP_HYST(i),
TEMP_TO_REG(VIA686A_INIT_TEMP_HYST));
}
/* Start monitoring */
via686a_write_value(client, VIA686A_REG_CONFIG, 0x01);
/* Cofigure temp interrupt mode for continuous-interrupt operation */
via686a_write_value(client, VIA686A_REG_TEMP_MODE,
via686a_read_value(client, VIA686A_REG_TEMP_MODE) &
!VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS);
}
void via686a_update_client(struct i2c_client *client)
{
struct via686a_data *data = client->data;
int i;
down(&data->update_lock);
if ((jiffies - data->last_updated > HZ + HZ / 2) ||
(jiffies < data->last_updated) || !data->valid) {
for (i = 0; i <= 4; i++) {
data->in[i] =
via686a_read_value(client, VIA686A_REG_IN(i));
data->in_min[i] = via686a_read_value(client,
VIA686A_REG_IN_MIN
(i));
data->in_max[i] =
via686a_read_value(client, VIA686A_REG_IN_MAX(i));
}
for (i = 1; i <= 2; i++) {
data->fan[i - 1] =
via686a_read_value(client, VIA686A_REG_FAN(i));
data->fan_min[i - 1] = via686a_read_value(client,
VIA686A_REG_FAN_MIN(i));
}
for (i = 1; i <= 3; i++) {
data->temp[i - 1] = via686a_read_value(client,
VIA686A_REG_TEMP(i)) << 2;
data->temp_over[i - 1] =
via686a_read_value(client,
VIA686A_REG_TEMP_OVER(i));
data->temp_hyst[i - 1] =
via686a_read_value(client,
VIA686A_REG_TEMP_HYST(i));
}
/* add in lower 2 bits
temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
*/
data->temp[0] |= (via686a_read_value(client,
VIA686A_REG_TEMP_LOW1)
& 0xc0) >> 6;
data->temp[1] |=
(via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
0x30) >> 4;
data->temp[2] |=
(via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
0xc0) >> 6;
i = via686a_read_value(client, VIA686A_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
data->alarms =
via686a_read_value(client,
VIA686A_REG_ALARM1) |
(via686a_read_value(client, VIA686A_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void via686a_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct via686a_data *data = client->data;
int nr = ctl_name - VIA686A_SYSCTL_IN0;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
via686a_update_client(client);
results[0] = IN_FROM_REG(data->in_min[nr], nr);
results[1] = IN_FROM_REG(data->in_max[nr], nr);
results[2] = IN_FROM_REG(data->in[nr], nr);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->in_min[nr] = IN_TO_REG(results[0], nr);
via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
data->in_min[nr]);
}
if (*nrels_mag >= 2) {
data->in_max[nr] = IN_TO_REG(results[1], nr);
via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
data->in_max[nr]);
}
}
}
void via686a_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct via686a_data *data = client->data;
int nr = ctl_name - VIA686A_SYSCTL_FAN1 + 1;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
via686a_update_client(client);
results[0] = FAN_FROM_REG(data->fan_min[nr - 1],
DIV_FROM_REG(data->fan_div
[nr - 1]));
results[1] =
FAN_FROM_REG(data->fan[nr - 1],
DIV_FROM_REG(data->fan_div[nr - 1]));
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->fan_min[nr - 1] = FAN_TO_REG(results[0],
DIV_FROM_REG(data->
fan_div[nr -1]));
via686a_write_value(client,
VIA686A_REG_FAN_MIN(nr),
data->fan_min[nr - 1]);
}
}
}
void via686a_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct via686a_data *data = client->data;
int nr = ctl_name - VIA686A_SYSCTL_TEMP;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
via686a_update_client(client);
results[0] = TEMP_FROM_REG(data->temp_over[nr]);
results[1] = TEMP_FROM_REG(data->temp_hyst[nr]);
results[2] = TEMP_FROM_REG10(data->temp[nr]);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->temp_over[nr] = TEMP_TO_REG(results[0]);
via686a_write_value(client,
VIA686A_REG_TEMP_OVER(nr + 1),
data->temp_over[nr]);
}
if (*nrels_mag >= 2) {
data->temp_hyst[nr] = TEMP_TO_REG(results[1]);
via686a_write_value(client,
VIA686A_REG_TEMP_HYST(nr + 1),
data->temp_hyst[nr]);
}
}
}
void via686a_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct via686a_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
via686a_update_client(client);
results[0] = ALARMS_FROM_REG(data->alarms);
*nrels_mag = 1;
}
}
void via686a_fan_div(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results)
{
struct via686a_data *data = client->data;
int old;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
via686a_update_client(client);
results[0] = DIV_FROM_REG(data->fan_div[0]);
results[1] = DIV_FROM_REG(data->fan_div[1]);
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
old = via686a_read_value(client, VIA686A_REG_FANDIV);
if (*nrels_mag >= 2) {
data->fan_div[1] = DIV_TO_REG(results[1]);
old = (old & 0x3f) | (data->fan_div[1] << 6);
}
if (*nrels_mag >= 1) {
data->fan_div[0] = DIV_TO_REG(results[0]);
old = (old & 0xcf) | (data->fan_div[0] << 4);
via686a_write_value(client, VIA686A_REG_FANDIV,
old);
}
}
}
int __init sensors_via686a_init(void)
{
int res, addr;
printk("via686a.o version %s (%s)\n", LM_VERSION, LM_DATE);
via686a_initialized = 0;
if (via686a_find(&addr)) {
printk("via686a.o: No Via 686A sensors found.\n");
return -ENODEV;
}
normal_isa[0] = addr;
if ((res = i2c_add_driver(&via686a_driver))) {
printk("via686a.o: Driver registration failed.\n");
via686a_cleanup();
return res;
}
via686a_initialized++;
return 0;
}
int __init via686a_cleanup(void)
{
int res;
if (via686a_initialized >= 1) {
if ((res = i2c_del_driver(&via686a_driver))) {
printk
("via686a.o: Driver deregistration failed.\n");
return res;
}
via686a_initialized--;
}
return 0;
}
EXPORT_NO_SYMBOLS;
#ifdef MODULE
MODULE_AUTHOR
("Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark Studebaker <mdsxyz123@yahoo.com>, Bob Dougherty <bobd@stanford.edu>");
MODULE_DESCRIPTION("VIA 686A Sensor device");
int init_module(void)
{
return sensors_via686a_init();
}
int cleanup_module(void)
{
return via686a_cleanup();
}
#endif /* MODULE */
Reference in new issue View Git Blame Copy Permalink