mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-19 11:19:31 +00:00
Jean Delvare
d3b00b0a86
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4816 7894878c-1315-0410-8ee3-d5d059ff63e0
1685 lines
83 KiB
Plaintext
1685 lines
83 KiB
Plaintext
lm_sensors CHANGES file
|
|
-----------------------
|
|
|
|
SVN HEAD
|
|
File BUGS: Delete
|
|
File i2c-dev.h: Support I2C block reads with specified length
|
|
All bus modules and documentation: Delete
|
|
All chip modules and documentation: Delete
|
|
Legacy hotplug modules and documentation: Delete
|
|
File doc/version-2: Delete, obsolete
|
|
File sensors.conf.eg: Add a dme1737 section
|
|
Add a thmc50 section
|
|
File lm_sensors.sysconfig: Delete, now generated by sensors-detect
|
|
File README.patches: Delete, obsolete
|
|
Library: Clean up pwm symbol names translation
|
|
Always build with sysfs support
|
|
Delete procfs and sysctl support (Linux 2.4)
|
|
Delete all remnants of algorithm names
|
|
Drop all the chip-specific support
|
|
Fix a memory leak on error
|
|
Speed up sensors_get_ignored() a bit
|
|
No longer export sensors_chip_name_has_wildcards()
|
|
Delete sensors_do_all_sets(), unused
|
|
Pass structures by reference
|
|
Drop support for dummy type
|
|
New function sensors_snprintf_chip_name()
|
|
Drop support for dashes in chip names
|
|
Add support for devices on SPI adapters
|
|
Makefile: Drop the package and version targets
|
|
Man pages: Drop "conforming to" sections
|
|
Man page sensors.conf.5: Update the chip statement section
|
|
Program config/grab_busses.sh: Delete, obsolete
|
|
Programs doc/*: Delete, obsolete
|
|
Program etc/sensors-conf-convert: New
|
|
Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
|
|
Program i2cdump: Use the new I2C block read function
|
|
Program isadump: Detect when address bit 7 is a busy flag
|
|
Fix Super-I/O exit sequence for Winbond/Fintek chips
|
|
Program matorb/displayit: Delete, obsolete
|
|
Program mkdev.sh: Delete, obsolete
|
|
Program mkpatch: Delete
|
|
Program fancontrol: Use let for arithmetic evaluation
|
|
No longer need awk and grep
|
|
Limit calls to external programs (Linux 2.6 only)
|
|
Check for configuration file validity
|
|
Support optional min and max PWM values
|
|
Better integration with init scripts
|
|
Use linear control instead of quadratic
|
|
Program fancontrol.pl: Delete, redundant
|
|
Program pwmconfig: Use smaller steps for low PWM values
|
|
Support optional min and max PWM values
|
|
Program rrd: Support only hwmon class devices
|
|
Look for rrd in /usr/bin by default
|
|
Add missing shell declarations
|
|
Update URI
|
|
Program sensord: Syncronize the version with lm-sensors
|
|
Drop all the chip-specific support
|
|
Fix a memory leak when daemonizing
|
|
Fix memory leaks in command line parsing
|
|
Program sensors: Drop all the chip-specific support
|
|
Fix alignment of alarm for one-limit temperatures
|
|
Drop option -U
|
|
Fix a memory leak on error (with -u)
|
|
New option --bus-list
|
|
Program sensors-detect: Stop Super-I/O probe after first family success
|
|
Fix SMSC DME1737 detection
|
|
Add /usr/sbin to the PATH (#2199)
|
|
Add ATI SB700 detection
|
|
Add Maxim MAX6680/MAX6681 detection
|
|
Add IT8726F detection
|
|
Fix IPMI support for 2.6 kernels
|
|
Add detection for non-standard SMSC Super-I/Os
|
|
No longer depend on i2cdetect
|
|
Add SMSC SCH5317 detection
|
|
Drop detection of most non-sensors I2C chips
|
|
Fix ADM1022 detection
|
|
Add detection of many SMSC Super-I/O chips
|
|
Add Fintek F71806FG and F71862FG detection
|
|
Add Winbond W83L786NR/NG/R/G detection
|
|
Add Winbond W83L771W/G detection
|
|
Add Intel Tolapai SMBus detection
|
|
|
|
|
|
2.10.3 (20070319)
|
|
Library: Do not skip i2c adapters with only a class device and no
|
|
physical device. This change is required to survive the
|
|
planned struct class_dev removal from future 2.6 kernels.
|
|
Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
|
|
Recognize i2c-isa-based devices as such even after class_dev
|
|
is gone
|
|
Compile with -D_REENTRANT
|
|
Fix support of Linux 2.6's max6650 driver
|
|
Fix max1619 support
|
|
Man page i2cdetect.8: Scanning range can be restricted
|
|
Module bmcsensors: Fix debugging messages
|
|
Module i2c-ali1563: Improve the status messages (2.6 backport)
|
|
Fix device initialization (2.6 backport)
|
|
Module i2c-amd8111: Cleanups (2.6 backport)
|
|
Fix initialization race (2.6 backport)
|
|
Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
|
|
Module i2c-piix4: Add ATI SB600 support (2.6 backport)
|
|
Module i2c-viapro: Add CX700 support (2.6 backport)
|
|
Module smsc47m1: Add SMSC LPC47M292 support
|
|
Get rid of a useless semaphore (2.6 backport)
|
|
Programs i2cdetect, i2cdump, isadump: Flush output in real time
|
|
Program i2cdump: Cleaner output in SMBus block read mode
|
|
Program fancontrol.pl: Fix pwmN_enable access (#2190)
|
|
Program sensors: Add smsc47m2 support (fans)
|
|
Fix -A option (hide adapter name) on error
|
|
Program sensors-detect: Only probe relevant I2C addresses
|
|
Drop ARP-capable device detection
|
|
Add Maxim MAX6655/MAX6656 detection
|
|
(Olexiy Avramchenko)
|
|
Add Maxim MAX1668, MAX1805, MAX1989 detection
|
|
Add VIA CX700 detection
|
|
Drop legacy W83627HF ISA detection
|
|
Don't bufferize stdout during probes
|
|
Speed up the LM75 and LM77 detection
|
|
Clean up the EEPROM detection
|
|
Add Dallas DS75 detection
|
|
Add SMSC LPC47M292 detection
|
|
Add nVidia MCP61 and MCP65 detection
|
|
Fix ADM1028 detection
|
|
Add Nat. Semi. PC8347L Super-I/O detection
|
|
Add SMSC SCH5504 Super-I/O detection (no sensors)
|
|
Make the LM78 and W83781D detection safer
|
|
|
|
|
|
2.10.2 (20070115)
|
|
RPM: Obsolete, removed
|
|
File doc/fan-divisors: Update
|
|
File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
|
|
Library: Add support for the pc87247 driver (fans only)
|
|
Probe for busses before chips
|
|
Drop support for algorithm names
|
|
Add support for coretemp driver
|
|
Major update/optimization of config-file scanner
|
|
Add config-file scanner regression tests
|
|
Add f71872f support
|
|
Add w83627dhg support (David Holl, #2157)
|
|
Get the i2c adapter names from classdev.name
|
|
Add adm1029 support (Corentin Labbe)
|
|
Man page i2cdetect.8: Describe the output convention
|
|
Man page sensors.1: Update (option -c) and clean up
|
|
Module bmcsensors: Fix several warnings
|
|
Fix fragile structure initialization
|
|
Module i2c-i801: Add ICH9 support
|
|
Module p4b_smbus: Add support for the ICH5
|
|
Module f71805f: Fix the device address decoding (2.6 backport)
|
|
Module icspll: Delete. It was useless and dangerous.
|
|
Program decode-dimms.pl: Remove spaces at end of lines
|
|
Program eepromer: Fix loads of warnings
|
|
Program i2cdetect: Make the output clearer
|
|
Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
|
|
Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
|
|
without need of recompilation.
|
|
Programs dump/*: More robust handling of user inputs
|
|
Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
|
|
Add support for non-i2c drivers
|
|
Program fancontrol.pl: Disable debugging by default
|
|
Add support for non-i2c drivers
|
|
More tolerant config file parsing
|
|
Program sensord: Add pc87247 support (fans only)
|
|
Add vt1211 support (#2150)
|
|
Add w83627dhg support (David Holl, #2157)
|
|
Add w83627ehf voltage support (Dave Platt)
|
|
Add k8temp support (Dave Platt)
|
|
Program sensors: Add pc87247 support (fans only)
|
|
Hide error on missing f71805f fan
|
|
Handle option -c more efficiently
|
|
Drop option -a (show algorithm names)
|
|
Add f71872f support
|
|
Add w83627dhg support (David Holl, #2157)
|
|
Add adm1029 support (Corentin Labbe)
|
|
Hide error on missing w83793 temp (Gong Jun)
|
|
Program sensors-detect: Add SMSC DME1737 detection
|
|
Add Fintek F71882FG and EPoX EP1308 detection
|
|
Add Intel Core thermal sensor detection
|
|
Preallocate memory for I2C_FUNCS ioctl (#2138)
|
|
Prevent misdetection of MAX6633/MAX6634/MAX6635
|
|
Add Intel ICH9 detection
|
|
Add Maxim MAX6648/MAX6692 detection
|
|
Improve ADM1029 detection
|
|
Add Andigilog chips detection
|
|
Add Intel AMB FB-DIMM thermal sensor detection
|
|
Add ATI SB600 detection
|
|
|
|
|
|
2.10.1 (20060924)
|
|
File doc/developers/checklist renamed to dev/developers/release_checklist
|
|
with clarifications and updates for new SVN server.
|
|
File README.package: Delete.
|
|
File doc/busses/i2c-piix4: Update (2.6 backport)
|
|
File doc/developers/sysfs-interface: Update
|
|
File etc/sensors.conf.eg: Add an smsc47m192 section
|
|
Comment out all set statements
|
|
Add an it8716 section
|
|
Add a w83793 section
|
|
Adjust the vt1211 section to match the new driver
|
|
interface
|
|
Library: Fix device scan when no i2c support is present
|
|
Add support for W83627EHF voltage inputs and alarms
|
|
Add support for the smsc47m192 driver
|
|
Fix all memory leaks (yeah!)
|
|
Fix no sensors being reported as an error
|
|
Add support for the IT8716F and IT8718F chips
|
|
Add support for the W83793 chip (Yuan Mu)
|
|
Map the 2.6 adm1026's fan8 to fan0
|
|
Missing sysfs busses and classes are not errors
|
|
Change vt1211 temp3-7 magnitude from 1 to 3
|
|
Makefile: Don't grep autoconf.h on user-space targets
|
|
Fix depmod on non-running kernel version
|
|
Remove empty include directories on make user_uninstall
|
|
Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
|
|
Module i2c-amd756-s4882: Improve static semaphore initialization
|
|
(2.6 backport)
|
|
Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
|
|
Add ICH8 support (2.6 backport)
|
|
Fix block transaction poll loops (2.6 backport)
|
|
Remove PCI function check (2.6 backport)
|
|
Cleanups (2.6 backport)
|
|
Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
|
|
Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
|
|
Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
|
|
Drop the fix_hstcfg parameter (2.6 backport)
|
|
Module i2c-viapro: Fix compilation with kernels < 2.4.21
|
|
Add VT8237A and VT8251
|
|
Module lm83: Add LM82 support (2.6 backport)
|
|
Module vt1211: The VT1211 has no in6
|
|
Rework the voltage and temperature conversions and the
|
|
temperature input order to match the Linux 2.6 driver
|
|
Module w83781d: Use real-time alarm registers when possible (2.6 backport)
|
|
Add specific alarm and beep defines for the W83791D
|
|
Module w83792d: Fix PWM range (2.6 backport)
|
|
Program decode-dimms.pl: Decode depending on the memory type
|
|
Decode the manufacturing date to an ISO8601 date
|
|
Add the memory size computation and provide brief
|
|
timing characteritics for SDRAM/DDR/DDR2 memory
|
|
Add memory size computation for Rambus memory
|
|
Various output cleanups and fixes
|
|
Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
|
|
Program decode-vaio.pl: Detect and skip false positives
|
|
Program i2cdetect: Add a mode to print adapter functionalities
|
|
Program i2cdump: Restore bank after bank switching
|
|
Add new mode W (read word on even register addresses)
|
|
Program mkpatch: Fix typo breaking f71805f
|
|
Turn warnings on (-w), and fix them
|
|
Print a usage message on missing command line parameters
|
|
Program pwmconfig: Use mktemp instead of tempfile
|
|
Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
|
|
Add smsc47m192 support
|
|
Add abituguru support (Hans de Goede)
|
|
Fix memory leak when printing an unknown chip
|
|
Add it8716 and it8718 support
|
|
Make each it87 fan and fan div optional
|
|
Print missing w83791d values
|
|
Add w83793 support (Yuan Mu)
|
|
The adt7463 may not have in4 (#2119)
|
|
Hide more vt1211 missing input errors
|
|
Clearer error messages when no sensors found
|
|
Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
|
|
Add ATI IXP200/300/400 SMBus detection
|
|
Prevent warning on 64-bit PCI addresses
|
|
Add Fintek F75363SG, F75111R/RG/N, F75121R,
|
|
F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
|
|
F75384S/M, F75387SG/RG and F81218D detection
|
|
Add Winbond W83793R/G and W83627DHG detection
|
|
Handle the W83791D driver difference between kernels
|
|
Add nForce4 MCP04, MCP51 and MCP55 detection
|
|
Add AMD Geode devices detection
|
|
Add ITE IT8716F and IT8718F detection
|
|
Add NatSemi/Winbond PC87427 detection
|
|
Get driver information for busy addresses from
|
|
sysfs (2.6 only)
|
|
Drop the ISA IT87xxF detection
|
|
Check i2c adapter functionalities before probing
|
|
Add Intel ICH8 SMBus detection
|
|
Add AMD K8 thermal sensors detection
|
|
Simplify detection of SiS5595, VIA686 and VT8231
|
|
Add Analog Devices ADM1033, ADM1034, ADT7462,
|
|
ADT7466, ADT7470, ADT7473 and ADT7475 detection
|
|
Check for root user at startup
|
|
Attempt to be slightly more user-friendly
|
|
Add VT8237A and VT8251
|
|
Remove detection of nVidia graphics adapters
|
|
Use sysfs for PCI device enumeration
|
|
Add generic PCI SMBus adapter detection
|
|
Add generic Super-I/O logical device detection
|
|
Add SMSC LPC47M172/182 detection
|
|
|
|
|
|
2.10.0 (20060214)
|
|
File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
|
|
File doc/busses/i2c-viapro: Update (2.6 backport)
|
|
File doc/chips/via686a: Update (2.6 backport)
|
|
File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
|
|
File etc/sensors.conf.eg: Do not set vrm by default
|
|
File i2c-dev.h: Fix union i2c_smbus_data definition
|
|
Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
|
|
Add missing parentheses around macros
|
|
Drop I2C_FUNC_SMBUS_EMUL
|
|
Drop I2C_FUNC_SMBUS_*_PEC
|
|
Drop I2C_SMBUS_*_PEC
|
|
File sensors_vid.h: Drop default VRM
|
|
Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
|
|
This is intentional. Use decode-dimms.pl if you still
|
|
need your memory SPD data.
|
|
Library: Big update to use libsysfs. More TODO though.
|
|
Fix bus matching code for Linux 2.6 (Karsten Petersen)
|
|
Add f71805f, w83687thf support
|
|
Add platform drivers support
|
|
Fix sysctl warnings on x86_64
|
|
Restore vt1211 temp1
|
|
Makefile: Compile user-space programs with -Wundef
|
|
Module i2c-i801: Simplify the hardware PEC code
|
|
Always set PEC mode explicitly before each transaction
|
|
Module i2c-i810: Documentation update, PCI IDs cleanup
|
|
Module i2c-keywest: Remove bus probing code (2.6 backport)
|
|
Module i2c-nforce2: Remove dead code (2.6 backport)
|
|
Add the ID of the nForce4 MCP-04 (2.6 backport)
|
|
Module i2c-via: Remove dead code
|
|
Module i2c-viapro: Remove dead code
|
|
Support I2C block read (2.6 backport)
|
|
Code cleanups (2.6 backport)
|
|
Improve debug register dump (2.6 backport)
|
|
Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
|
|
i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
|
|
i2c-sis645: Use pci_driver name to request I/O region; do
|
|
not initialize i2c_adapter name to "unset" (2.6
|
|
backport)
|
|
Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
|
|
(2.6 backport)
|
|
Module adm9240: Cleanups (2.6 backport)
|
|
Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
|
|
Module it87: Minor cleanups
|
|
Fix fan3_div setting bug (Anton V. Staaf)
|
|
Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
|
|
Separate the register read function
|
|
Add PEC support for the ADM1032
|
|
Module via686a: Cleanups
|
|
Module w83627hf: Drop useless initialization step (2.6 backport)
|
|
Fix in4 for W83627THF and W83637HF (Yuan Mu)
|
|
Fix alarms (Yuan Mu)
|
|
Preserve fan min on fan div change (Yuan Mu)
|
|
Properly handle W83627THF without VID (Yuan Mu)
|
|
Fix in0 limit settings in "VRM9" mode (Yuan Mu)
|
|
Add W83687THF support
|
|
Module w83781d: Drop W83697HF support (Grant Coady)
|
|
Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
|
|
Fix fan control mode (PWM/DC) reporting
|
|
Fix fan div auto-adjust (Yuan Mu)
|
|
Fix the subclient handling
|
|
Module w83l785ts: Minor cleanup (2.6 backport)
|
|
Module vt1211: Restore temp1
|
|
Modules vt1211, vt8231: Change default VRM to 9.1
|
|
Program decode-dimms.pl: Add lookup tables for manufacturer names
|
|
Fix rounding error in PCxxxx speed computation
|
|
Improve text output
|
|
Improve speed under Linux 2.6
|
|
Verify checksum before decoding anything
|
|
Improve manufacturing location decoding
|
|
Improve memory type detection
|
|
Improve part number decoding
|
|
Program i2cdump: Drop now useless #ifdef tests
|
|
Fix capability check for continuous byte mode
|
|
Program i2cget: New
|
|
Program i2cset: Add PEC support
|
|
Fix argc check
|
|
Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
|
|
Print the correct bus type if bus
|
|
functionality can be queried
|
|
Program isadump: Display the real addresses in flat mode
|
|
Program mkdev.sh: Silently skip already existing nodes
|
|
Program mkpatch: Include f71805f
|
|
Program sensord: Do not log algorithm names
|
|
Drop EEPROM support (Aurelien Jarno)
|
|
Add W83627EHF, F71805F/FG support
|
|
Fix PC87365/PC87366 alarms
|
|
Program sensors: Drop free_the_label
|
|
Fix compilation with uclibc (no iconv)
|
|
Add f71805f, w83687thf support
|
|
Program sensors-detect: Drop algorithm names
|
|
Do not rely on i2cdetect -l printing algo names
|
|
Simplify adapter name matching mechanism
|
|
New address for ADM1032, ADT7461
|
|
Improve ADT7467, ADT7468 support
|
|
Fix MAX6659 reported driver
|
|
Add Fintek F71805F detection
|
|
Add Analog Devices ADT7476 detection
|
|
Add Intel 82845G detection
|
|
Add IT8201R/IT8203R/IT8206R/IT8266R detection
|
|
Fix udev detection in some corner case
|
|
Improve DS1621 detection
|
|
Always prefer ISA access over SMBus access
|
|
|
|
|
|
2.9.2 (20050906)
|
|
File doc/chips/*: Big update (2.6 backport)
|
|
Library: Drop ds1780-specific code (now use adm9240)
|
|
Fix memory leak in sensors_get_label()
|
|
Support /sys/class/hwmon (Linux 2.6.14+)
|
|
Limit stack usage in sensors_read_proc_chips()
|
|
Makefile: Detect 2.6+ kernels and check targets
|
|
Man page isaset.8: Fix typos
|
|
Module adm1031: Fix broken kfree() calls
|
|
Module i2c-ali1563: New (2.6 backport by Winbond)
|
|
Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
|
|
Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
|
|
w83627hf.c: Tag find function __init
|
|
Module lm93: Fix memory leak
|
|
Module smsc47m1: Fix PWM enable polarity on read
|
|
Modules w83627hf, w83781d: Allow setting fan divisor to 128
|
|
Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
|
|
Added DDR/DDR2 frequency reporting in convenient
|
|
form of DDRxxx PCyyyy
|
|
Program i2cdump: Properly handle short i2c block reads
|
|
Program fancontrol.pl: Fix compile errors
|
|
Program mkpatch: Include i2c-ali1563
|
|
Include w83792d
|
|
Program pwmconfig: Fix unsafe temporary file use
|
|
Program rrd: Support 2.6 kernels
|
|
Program sensord: Add support for w83637hf
|
|
Support pc87360 (Henrik Brix Andersen)
|
|
Program sensors: Support the VAIO "VGN" prefix for eeprom
|
|
Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
|
|
Advertise the w83792d driver
|
|
Improve IT8705F and IT8712F detection
|
|
Merge LM82 and LM83 detection
|
|
Add W83687THF detection
|
|
|
|
|
|
2.9.1 (20050412)
|
|
File doc/busses/i2c-nforce2: Update
|
|
File doc/chips/it87: Update
|
|
File doc/chips/lm90: Update for adt7461
|
|
File doc/chips/mic74: New
|
|
File etc/sensors.conf.eg: New sections for lm92 and w83792d
|
|
Library: Add support for 2.6 fscpos driver (Stefan Ott)
|
|
Fix sis5595 in4 (Aurelien Jarno)
|
|
Add support for 2.6 gl520sm driver (Maarten Deprez)
|
|
Add support for 2.6 bmcsensors driver (Yani Ioannou)
|
|
Add support for w83792d (Chunhao Huang/Winbond)
|
|
Add support for 2.6 adt7461 (James Chapman)
|
|
Add support for 2.6 lm92
|
|
Add support for 2.6 vt1211
|
|
Add preliminary support for 2.6 w83627ehf
|
|
Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
|
|
Use -fno-strict-aliasing on all architectures
|
|
Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
|
|
Module bmcsensors: Fix compile error
|
|
Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
|
|
Module ds1621: Fix detection (Aurelien Jarno)
|
|
Module eeprom: Discard SPD-centric checksum module parameter
|
|
Cleanup detection function (backport from Linux 2.6)
|
|
Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
|
|
Module i2c-i801: Temporarily disable broken I2C block read
|
|
Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
|
|
Gelato)
|
|
Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
|
|
Module i2c-viapro: Prevent repeated resets
|
|
Module it87: Improve Super-I/O detection
|
|
Limit I2C address range
|
|
Support VID on the IT8712F
|
|
Module lm75: Only initialize CMP/INT bit
|
|
Module lm78: Fix bug with setting negative temperature limits
|
|
Module lm85: Properly differentiate between ADM1027 and ADT7463
|
|
Add EMC6D102 support
|
|
Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
|
|
Add limited ADT7461 support
|
|
Module lm93: Fix IN10 (+5V) scaling
|
|
Module mic74: New
|
|
Module w83627hf: Support secondary Super-I/O address
|
|
Enable temp2 and temp3 if they are disabled
|
|
Module w83781d: Revert AS99127F temp2 and temp3 computation change
|
|
Skip final initialization step for AS99127F chips
|
|
Module w83792d: New (Chunhao Huang/Winbond)
|
|
Program ddcmon: New; user-space replacement for the ddcmon driver
|
|
Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
|
|
Program isadump: Handle Super-I/O keys
|
|
Program lm_sensors.init: Cleanups (Axel Thimm)
|
|
Program mkdev.sh: Add basic command-line interface
|
|
Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
|
|
Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
|
|
Don't complain about read-only enable files (lm85)
|
|
Fix handling of alternate config file name
|
|
Program sensord: Fix erroneous error message (Aurelien Jarno)
|
|
Support sis5595 in4 (Aurelien Jarno)
|
|
Support w83627thf
|
|
Support the separate it8712 prefix (Aurelien Jarno)
|
|
Program sensors: Display sis5595 in4 (Aurelien Jarno)
|
|
No errors on missing pc87360 fans
|
|
Add gl520sm support (Maarten Deprez)
|
|
Improve vt1211 error/ignore handling (Michael Carland)
|
|
Support w83792d, w83627ehf
|
|
Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
|
|
Improve IT8705F and IT8712F detection
|
|
Improve udev detection
|
|
Fix DS1621 detection
|
|
Add W83627EHF detection
|
|
Add ATI SMBus detection
|
|
Add VT1211 alias detection
|
|
Warn if chip modules not found
|
|
Add i2c-ipmi to list if bmcsensors is on it
|
|
Add PC87591 detection
|
|
Search for correct udev db file name
|
|
Add nForce3 250Gb and nForce4 detection
|
|
|
|
|
|
2.9.0 (20041228)
|
|
NOTE: Requires i2c-2.9.0 or newer!
|
|
File README.thinkpad: Update
|
|
File doc/chips/it87: Cleanups
|
|
File doc/chips/lm63: New
|
|
File etc/sensors.conf.eg: Set via686a voltage limits
|
|
File kernel/chips/Module.mk: Resync module list with mkpatch
|
|
File kernel/include/sensors_compat.h: Define __devexit_p if missing
|
|
(kernels 2.4.16 and older)
|
|
Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
|
|
and dec_use removed in release 2.8.0
|
|
Modules (all chip drivers): Remove owner from i2c_driver; pass
|
|
controlling_mod to i2c_register_entry() again
|
|
Module bmcsensors: Support function 1/x
|
|
Module i2c-amd756: Display the real bus name
|
|
Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
|
|
Module i2c-i801: Support i2c block read (ICH5 and higher)
|
|
Add PEC support for ICH6
|
|
Add support for ICH7
|
|
Module i2c-ipmb: Remove from build since it doesn't work
|
|
Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
|
|
Module icspll: Fix compilation
|
|
Module lm63: New driver for the National Semiconductor LM63
|
|
Module lm83: Use signed types for temperatures
|
|
Check limits on register writes
|
|
Module lm87: Round voltages properly
|
|
Retry on read errors (David Knierim)
|
|
Less agressive init (no reset)
|
|
Module lm90: Use signed types for temperatures
|
|
Check limits on register writes
|
|
Module lm93: Added module parameter for VID pin input thresholds.
|
|
Fix typo in dynamic VID alarms
|
|
Adds a couple log messages for failed transactions (David
|
|
Knierim)
|
|
Fix compilation breaking C99-ism (Axel Thimm)
|
|
Fix block read retries
|
|
Module pc87360: Support secondary Super-I/O address
|
|
Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
|
|
Library: Add lm63 support
|
|
Add lpc47b397 support
|
|
Programs *.init: Rename lockfile to match file name
|
|
Programs i2cset, isaset: Written byte/word can be masked
|
|
Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
|
|
Program mkpatch: Include i2c-amd756-s4882
|
|
Program pwmconfig: Handle new (well, back to old) pwm files names for
|
|
Linux 2.6.10 and up
|
|
Program sensord: Do not scale load average (Aurelien Jarno)
|
|
Program sensors: Add lm63, lpc47b397 support
|
|
Support DDR2 memory module EEPROMs (Rudolf Marek)
|
|
Support only one location for the default configuration file
|
|
Display the default configuration file location in --help
|
|
Simplify the configuration file opening code
|
|
Program sensors-detect: Improve LM63 detection
|
|
Discard IBM Thinkpad detection code
|
|
Add PCA9556, LPC47B397, ICH7 detection
|
|
Fix W83792D detection, add W83791SD detection
|
|
|
|
|
|
2.8.8 (20041007)
|
|
File doc/donations: Update
|
|
File doc/lm_sensors-FAQ.texi: Add 4.6.1
|
|
Update 4.7
|
|
File doc/chips/gl518sm: Update "iterate" info
|
|
File doc/chips/it87: Discard outdated module parameters
|
|
File doc/chips/lm75: LM77 is not supported
|
|
File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
|
|
File doc/chips/lm93: New
|
|
File doc/chips/w83l785ts: Improvements
|
|
File etc/sensors.conf.eg: Fix it87 lines order
|
|
Update lm87 section
|
|
File kernel/include/sensors_vid.h: Support VRM 10.0
|
|
Library: Support 2.6 adm1025
|
|
Preliminary support for 2.6 lm87
|
|
Support 2.6 adm9240
|
|
Allow an alternative sysfs file name for chip features (2.6)
|
|
Fix lm83 critical limits (2.6)
|
|
Add lm93 support
|
|
Prevent some procfs errors from being silently ignored
|
|
Makefiles: Implement user_uninstall (Rudolf Marek)
|
|
Spoof LOGNAME and HOSTNAME when making html man pages
|
|
Module adm1025: Refine detection
|
|
Update limit registers again (revert of 2.8.1)
|
|
Init high limits if they read 0
|
|
Fix conversions
|
|
Module lm75: Refine detection
|
|
Module lm78: Fix init
|
|
Module lm83: Default to kind lm83 if forced.
|
|
Fix temperature macros.
|
|
Module lm90: Add LM86, MAX6657 and MAX6658 support
|
|
Module lm93: New
|
|
Module mtp008: Fix the setting of limits on temp2
|
|
Module pca9540: Refine detection
|
|
Module pc87360: Change voltage/thermistor magnitude from 2 to 3
|
|
Support VID
|
|
Fix fan_div file when fan count is less than 3
|
|
Additional init and debug
|
|
Module smsc47m1: Fix pwm_enable being inverted
|
|
Module w83627hf: Add alternate VCORE/in0 calculation method
|
|
Remove reset of chip by driver on initialization
|
|
Module w83781d: Fix default VRM for w83791d
|
|
Module w83l785ts: Implement read error handling (backport from 2.6)
|
|
Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
|
|
Wait for user input to continue (as opposed to 5 sec
|
|
delay), can be skipped with -y
|
|
Various cleanups and code refactoring
|
|
Update manual pages
|
|
Program fancontrol.init: New (Dean Takemori)
|
|
Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
|
|
Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
|
|
(Giuseppe Della Bianca)
|
|
Program mkdev.sh: Detect devfs and refuse to run
|
|
Use mknod's mode instead of chmod
|
|
Program mkpatch: Include xeontemp and pc87360
|
|
Program sensors: Rework adm1025 support
|
|
Display pc87365/pc87366 VID
|
|
Improve smsc47m1 support
|
|
Hide 2.6 adm1027 alarm_mask being missing
|
|
Print VRM version for all supported chips
|
|
Program sensors-detect: Support LM93, LM77, LM63
|
|
Support PC8739x Super-I/O family (no sensors)
|
|
Fix PCA9540 support
|
|
Refine ADM1025/ADM1025A detection
|
|
Refine LM75 detection
|
|
Ignore missing /proc/modules (Andras Bali)
|
|
Script-wide Perl cleanups
|
|
Support udev
|
|
Support W83792D, LM96000
|
|
|
|
|
|
2.8.7 (20040611)
|
|
File README.thinkpad: Update 24RF08 status
|
|
File doc/fan-divisors: More info on accuracy
|
|
File doc/lm_sensors-FAQ.texi: Update 4.27
|
|
File doc/chips/adm1031: New
|
|
File doc/chips/max1619: New
|
|
File doc/chips/pc87360-fan: Renamed to pc87360
|
|
File doc/chips/pc87360: Big update
|
|
File doc/chips/w83781d: Update AS99127F documentation
|
|
File etc/sensors.conf.eg: Add comments about BP6 voltages
|
|
Add comment on Asus A7V8X-X VCore
|
|
Misc fixes to lm80 section
|
|
Update via686a section
|
|
New lm99 section
|
|
Add section for LM85-like chips
|
|
Preliminary pc87366 section
|
|
Add comment on GL520SM application modes
|
|
Document beep_enable (Aurelien Jarno)
|
|
Preliminary max1619 section
|
|
Preliminary adm1030 and adm1031 sections
|
|
Library: Fix 2.6 VRM
|
|
Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
|
|
Fully support the PC87360 family
|
|
Support the lm99
|
|
Add version and date strings
|
|
Support 2.6 max1619
|
|
Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
|
|
Man page i2cdetect.8: document new command line flags
|
|
Man page i2cdump.8: More details on how i2cdump can write to a chip
|
|
Modules (all chip drivers): Rework memory allocation scheme.
|
|
Module adm1031: New (Alexandre d'Alton)
|
|
Module bmcsensors: Fix oops by creating thread for initialization
|
|
Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
|
|
Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
|
|
asb100.c, lm92.c: Use swab16
|
|
Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
|
|
Module gl520sm: Less agressive initialization process
|
|
Fix temp1 limits being unsettable in application
|
|
Ensure that temp2 and in4 are not used at the same time
|
|
Module i2c-i801: Support 6300ESB and ICH6
|
|
Module i2c-piix4: Don't blacklist IBM with Serverworks chip
|
|
Module i2c-sis645: Add support for SiS655
|
|
Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
|
|
Module lm90: Support LM99 and LM89
|
|
Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
|
|
Get rid of useless i2c_probe call
|
|
Module max1619: New (Alexey Fisher)
|
|
Module p4b_smbus: Add support for mobile versions of the 82801
|
|
(Axel Thimm)
|
|
Module pc87360-fan: Renamed to pc87360
|
|
Module pc87360: Also support PC87365 and PC87366
|
|
Add write support
|
|
Correctly set the chip name depending on the type
|
|
Add voltage and temperature support
|
|
Fix fan speed computation
|
|
Retrieve fans configuration from Super-I/O space
|
|
Export pwm_enable (read-only)
|
|
Honor pwm invert bits
|
|
Clear fan alarms after we read them
|
|
Do not read fan data when monitoring is disabled
|
|
Do not include SENSORS_INSMOD stuff
|
|
New module parameter: init
|
|
Fan clock dividers change automatically
|
|
Add thermistor dupport
|
|
Module smsc47m1: Lock on reads and writes
|
|
Various PWM fixes
|
|
Module thmc50: Fix address range
|
|
Module via686a: Fix voltage roundings
|
|
Simplify temperature conversions
|
|
Module w83781d: Drop PWM support for as99127f
|
|
Invert AS99127F beep bits in driver rather than user-space
|
|
Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
|
|
Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
|
|
Program fancontrol.pl: New
|
|
Program i2cdetect: Adapt probing method to address
|
|
Add -q and -r flags to force probing methods
|
|
Allow probing range selection
|
|
Program isadump: Major improvements
|
|
Program isaset: New
|
|
Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
|
|
module
|
|
Include i2c-nforce2
|
|
Program sensord: New --rrd-no-average parameter
|
|
Syncronize time slots with rrd
|
|
Fix W83781D temp3 alarm (Aurelien Jarno)
|
|
Add ASB100 support (Andrew May)
|
|
Program sensors: Fully support the PC87360 family
|
|
Fix lm80 temperature alarms
|
|
Support the lm99
|
|
Do not invert AS99127F beep bits anymore
|
|
Fix W83781D temp3 alarm (Aurelien Jarno)
|
|
Print library version string
|
|
Program sensors-detect: Rework Super I/O detection
|
|
Support SiS655/SiS96x
|
|
Support ADT7461 and ADT7467
|
|
Better support for ADM1027, ADT7460 and ADT7463
|
|
Explicitly support ADM1028
|
|
Scan all logical devices of PC87365 and PC87366
|
|
Detect LM92, LM76, MAX6633, MAX6634, MAX6635
|
|
Detect eeproms with software write protect (not
|
|
enabled by default)
|
|
Support ALi 1563 (2.6 only)
|
|
Drop LTC1710 support
|
|
Use byte reads for probing on ranges 0x30-0x37 and
|
|
0x50-0x5F
|
|
Improve LM89 and LM99 support
|
|
Support GeForce FX 5900 video cards
|
|
Fix devfs misdetection (Aurelien Jarno)
|
|
Detect 6300ESB, ICH6
|
|
Fix double detection of ISA chips
|
|
Support MAX1619
|
|
Support PC87373 Super-I/O
|
|
Fix unknown adapters appearing multiple times
|
|
Refine MAX6650/MAX6651 detection
|
|
|
|
|
|
2.8.6 (20040405)
|
|
File README.thinkpad: Update status
|
|
File doc/chips/pca9540: New
|
|
File doc/chips/pc87360-fan: New
|
|
File etc/sensors.conf.eg: Update pcf8591 default configuration
|
|
Library: Switch to new sysfs naming standard
|
|
Fix gcc 3.3 warnings (Philipp Thomas)
|
|
Support 2.6 ds1621 and pcf8591
|
|
Change pcf8591 magnitudes
|
|
Support pc87360-fan
|
|
Makefile: Install shared library 755
|
|
Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
|
|
Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
|
|
Modules ds1621, pcf8591: Check for capabilities before using them
|
|
(Aurelien Jarno)
|
|
Modules pcf8574, pcf8591: Cleanups
|
|
Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
|
|
Module adm1021: Better detection and initialization
|
|
Module pca9540: New driver for the Philips PCA9540
|
|
Module pc87360-fan: New driver for the National Semiconductor PC87360,
|
|
PC87363 and PC87364 Super I/O chips
|
|
Module smsc47m1: Support the LPC47B27x
|
|
Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
|
|
Program i2cdetect: Skip special addresses by default
|
|
Program sensord: Prevent null pointer dereference (Tim Toohey)
|
|
Program sensors: Print the degree symbol in the terminal's current locale
|
|
(Aurelien Jarno)
|
|
Update pcf8591 print to support 2.6 driver
|
|
Support pc87360-fan
|
|
Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
|
|
Improved SiS chips support
|
|
Add a white list of IBM systems
|
|
Drop support of undetectable adapters
|
|
Fix smart battery detection
|
|
Add smart battery charger and manager detection
|
|
Rework adm1021 and clones detection
|
|
The PC87360, PC87363 and PC87364 Super I/O chips
|
|
now have a (preliminary) driver
|
|
Rework Super I/O detection
|
|
Better support of devfs
|
|
Program sensors-detect-stat.pl: New
|
|
|
|
|
|
2.8.5 (20040305)
|
|
File doc/chips/SUMMARY: Update
|
|
File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
|
|
Makefiles hotplug and rrd: Remove -o and -g arguments to install
|
|
Module bmcsensors: Increase max SDRs to 100
|
|
Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
|
|
Module i2c-amd756: Don't register driver to avoid driver conflicts.
|
|
(Daniel Rune Jensen)
|
|
Module it87: Better temperature sensor types handling (Takeru Komoriya)
|
|
Fix reset=1 (Takeru Komoriya)
|
|
Module lm80: Code cleanups
|
|
Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
|
|
Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
|
|
Module w83627hf: Add w83637hf support
|
|
Fix exported name
|
|
Fix PWM in w83627thf
|
|
Preserve other bits when forcing temp2/3 to comparator mode
|
|
Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
|
|
Remove asb100 support
|
|
Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
|
|
Define driver ID if i2c-id.h doesn't have it yet.
|
|
Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
|
|
Backport oops fix from Linux 2.6.
|
|
Modules (all chips): Get rid of useless headers
|
|
Program decode-edid.pl: Add sysfs support
|
|
Program sensors: Add w83637hf support
|
|
Add support for Shuttle Ethernet EEPROMs
|
|
Drop 2.6 subclient detection
|
|
Program sensors-detect: Add heuristics to the LM80 detection function
|
|
Add support for W83L785R, improve W83L784R/AR
|
|
Add GeForce FX 5600 as supported by rivatv
|
|
More Super IO chips, better handling
|
|
Library: Update to match renames in fscher
|
|
Reverse temporary changes to w83l785ts mappings
|
|
Fix vt1211 and vt8231 uch_config not being writable
|
|
Add 2.6 lm80 support
|
|
Add w83637hf support
|
|
Remove in6 and temp1 from vt1211 and vt8231
|
|
Add support for Shuttle Ethernet EEPROMs
|
|
Remove unused as99127f features
|
|
|
|
|
|
2.8.4 (20040207)
|
|
File doc/lm_sensors-FAQ.texi: Update 4.20.
|
|
File doc/chips/it87: Change hyst to low
|
|
File doc/chips/w83l785ts: New
|
|
File etc/sensors.conf.eg: Change it87 hyst to low
|
|
Fix w83697hf supposed to have temp3
|
|
Limits initialization for adm1025/ne1619
|
|
Handle fscher voltage conversions
|
|
Add Tyan Trinity S2495 KT400 setup (Eric
|
|
Schumann)
|
|
Fix fscher fan labels (Reinhard Nissl)
|
|
Library: Better 2.6 eeprom support
|
|
Change it87 hyst to low
|
|
Add 2.6 gl518sm, fscher support
|
|
Fix 2.6 negative voltages handling
|
|
Temporary fix to w83l785ts mappings
|
|
Module adm1025: Separate prefix for NE1619
|
|
Module adm1026: Remove use of temporary ID
|
|
Define addresses as a range
|
|
Module bmcsensors: Fix reservations
|
|
Module fscher: Externalize voltage conversions
|
|
Module eeprom: Remove memtype
|
|
Module i2c-piix4: Fix resource release error
|
|
Various cleanups
|
|
Program decode-vaio.pl: Add sysfs support
|
|
Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
|
|
Drop linux 2.2 support
|
|
Add w83627hf
|
|
Program sensors: Do not show algorithm by default
|
|
Cleanup temperature unit display code
|
|
Cleanup label spacing code
|
|
Fix output to UTF-8 terms (Marcel Sebek)
|
|
Simplify gl518sm print
|
|
Do not ignore errors in FSC chips prints
|
|
Fix w83l785ts print
|
|
Cleanup FSC chips prints
|
|
Program sensors-detect: Fix PATH issues
|
|
Correctly point to the fscher driver
|
|
|
|
|
|
2.8.3 (20040115)
|
|
File lm_sensors.spec: Update
|
|
Library: Add 2.6 eeprom, lm90 support
|
|
Fix 2.6 temp_hystX for 2.6.1-rc1 and later
|
|
Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
|
|
Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
|
|
Module i2c-amd756: Fix byte writes
|
|
Module i2c-tsunami: Cleanups (Daniel Nilsson)
|
|
Module it87: Fix sg_tlx writes; fix sensor type reporting;
|
|
add 8712 Super I/O detection;
|
|
remove initialization of temp_type and fan_ctl;
|
|
remove init and temp_type module parameters
|
|
Module lm90: Handle hysteresis differently
|
|
Module smartbatt: Fix detection, magnitudes, temp
|
|
Module w83781d: Fix negative voltages
|
|
Module w83l785ts: New
|
|
Program eeprog: Make 8 bit mode the default
|
|
Program fancontrol: Improvements, fixes, support 2.6 kernels
|
|
Program mkpatch: Add lm75.h
|
|
Program pwmconfig: Improvements, fixes, support 2.6 kernels
|
|
Program sensors: Add ASB100 support
|
|
Program sensors-detect: Add 8712 Super I/O detection;
|
|
add W83L785TS detection
|
|
|
|
|
|
2.8.2 (20031211)
|
|
IMPORTANT: Limit initialization removed from all chip drivers!
|
|
If you didn't run 'sensors -s' in the past you may need to now!
|
|
File sensors.conf.eg: Change lm75 scaling back to 1;
|
|
Add example for asb100
|
|
Library: Fix bmcsensors scaling, increase number of sensors;
|
|
Add w83627thf support; Advance version to 3.0.0;
|
|
Add hermes, ADM1032, ASB100 support;
|
|
Add it87 sensor type support;
|
|
Add sysfs support for kernel 2.6;
|
|
Fix memory leaks
|
|
Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
|
|
Fail if no kernel .config file exists;
|
|
Don't build module dependencies for user and user_install
|
|
Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
|
|
it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
|
|
smsc47m1, thmc50, via686a, w83627hf, w83781d:
|
|
Remove initialization of limits by driver.
|
|
Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
|
|
Modules (chip): Init cleanups
|
|
Module asb100: New
|
|
Module bmcsensors: Fix voltage scaling, voltage and fan limits
|
|
Modules ddcmon, eeprom: Add failure printks
|
|
Module fscher: New (Fujitsu-Siemens Hermes driver)
|
|
Module i2c-amd756: Fix AMD8111 support
|
|
Module i2c-amd8111: Fix byte writes
|
|
Module i2c-nforce2: Fix byte writes
|
|
Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
|
|
Module i2c-sis630: Sync with 2.6.0-X driver version
|
|
Module i2c-viapro: Add support for Via 8237
|
|
Module it87: Add pwm and "smart guardian" support;
|
|
add it87 sensor type support
|
|
Module lm75: Fix negative voltages
|
|
Module lm90: Add ADM1032 support
|
|
Module w83781d: Fix 791d and 627hf detection
|
|
Module w83627hf: Add VID support
|
|
Program dmidecode: Remove (sensors-detect doesn't need it anymore)
|
|
Program eeprog: New
|
|
Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
|
|
support sysfs for i2c bus search
|
|
Program i2cdetect: Add -l option to list busses
|
|
Program i2cdump: Add 'c' mode for consective address reads
|
|
Program mkpatch: Cleanups
|
|
Program pwmconfig: Handle multiple fans controlled by a single pwm
|
|
Program sensord: Remove ddcmon support
|
|
Program sensors: Add ADM1032 support; add messages for sysfs
|
|
Program sensors-detect: Prefer Super I/O drivers;
|
|
Fix W83627HF and W83791D detection; detect CSB6;
|
|
Detect ADM1029, ADM1030, ADM1031;
|
|
Detect W83637HF, W83697UF;
|
|
Add it87 sensor type support; add sysfs support
|
|
Reduce lm80 misdetects; remove PCFxxxx "detection"
|
|
Detect VT8237 (KT600)
|
|
Use VPD instead of DMI+ACPI for Thinkpad detection
|
|
Suggest new asb100 driver instead of w83781d
|
|
|
|
|
|
2.8.1 (20031005)
|
|
NOTE: Requires i2c-2.8.1 or newer!
|
|
File sensors.conf.eg: Improved adm1025 section
|
|
Default temp labels for as99127f
|
|
Improved lm83 section
|
|
Better support for Asus A7V8X-X
|
|
File doc/chips/SUMMARY: Add SMSC manufacturer ID
|
|
File doc/chips/adm1025: Add decent documentation (almost new)
|
|
File doc/chips/lm83: Known motherboards list update, misc updates
|
|
Library: Change adm1025 names (hyst/over become low/high)
|
|
Swap adm1025 temp1 and temp2 to match the driver's order
|
|
Advance version to 2.0.1
|
|
Update lm83 support
|
|
Add support for lm90, xeontemp, max6650
|
|
Add separate messages for read and write errors
|
|
Add missing message for parse error
|
|
Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
|
|
Modules (various): Fix includes for compilation on Alpha
|
|
Use the new i2c_delay function instead of the various
|
|
do_pause functions
|
|
Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
|
|
Module i2c-nforce2: Cleanups
|
|
Module i2c-i810: Use readl/writel for portable access to PCI memory
|
|
Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
|
|
Module i2c-savage4: Use readl/writel for portable access to PCI memory
|
|
Module i2c-sis630: Fix detection
|
|
Add block data read/write support
|
|
Module i2c-sis645: Detection method change/bugfix
|
|
Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
|
|
Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
|
|
Module adm1025: Major driver update
|
|
Add support for Philips NE1619
|
|
Simplify the driver a lot (unified voltages, unified
|
|
temperatures and much more)
|
|
Fix default voltage limits
|
|
Change default temperature limits
|
|
Swap remote and local temperatures to match the internal
|
|
registers order (make the code unification possible)
|
|
Export remote diode fault through alarms
|
|
Module ddcmon: Major update
|
|
Add half a dozen new features
|
|
Add checksum parameter (same as for the eeprom module)
|
|
Fix monitor limits
|
|
Module eeprom: Ignore Sony Vaio EEPROMs with a password set
|
|
Module lm78: Fix a fan_div/fan_min bug
|
|
Module lm83: Add t_crit and alarms support
|
|
Module lm90: New
|
|
Module max6650: New
|
|
Module saa1064: New
|
|
Module smsc47m1: Add support for 47M142
|
|
Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
|
|
enhance w83627thf support
|
|
Module w83781d: Enhance chip detection; clean up error returns;
|
|
fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
|
|
Module xeontemp: New
|
|
Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
|
|
Mark Rambus as unsupported
|
|
Program decode-edid.pl: New
|
|
Interfaces between our eeprom module and
|
|
parse-edid from the read-edid project
|
|
Program p4b_smbus: Fix SMP compilation
|
|
Program sensord: Add support for IT87 (Mike Black)
|
|
Change ADM1025 support to match the changes made to
|
|
the library
|
|
Program sensors: Rewrite and enhance EEPROM support
|
|
Change LM83 and ADM1025 support to match the changes
|
|
made to the library
|
|
Add DRDRAM support to print_eeprom
|
|
Exit(1) on /proc write failure (Malte Starostik)
|
|
Add LM90, MAX6650 support
|
|
Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
|
|
Add support for LM82, LM86, LM89
|
|
Improved W83781D family detection
|
|
Add support for AS19927F rev.2, ASB100 Bach
|
|
Add support for Asus Mozart-2 (3 types)
|
|
Add support for NE1619
|
|
Add support for FSC Hermes
|
|
Make sure /sbin is in the user's path
|
|
Fix EEPROM detection
|
|
Automatic module.conf and /dev/i2c* detection
|
|
Improve LM82 and LM83 detection
|
|
Handle "to-be-written" cleanly
|
|
Add detection for 47M14x Super I/O
|
|
Handle the one-address-many-chips-same-driver
|
|
case
|
|
|
|
|
|
2.8.0 (20030714)
|
|
NOTE: Requires i2c-2.8.0 or newer!!!
|
|
Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
|
|
2.4.13 or later required for mkpatch.
|
|
File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
|
|
i2c package
|
|
File doc/chips/fscscy: Add watchdog documentation
|
|
File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
|
|
File sensors.h: Now automatically generated
|
|
Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
|
|
add adm1026, lm83, lm85, w83791d support;
|
|
Advance version to 2.0.0
|
|
Makefiles: Generate warnings if new library won't be found by ld.so;
|
|
Modules now install in kernel/drivers/i2c/[busses,chips];
|
|
Ensure that headers in /usr/local/include are used first;
|
|
Don't use /usr/include headers for modules;
|
|
Handle multiple UTS_RELEASE definitions in linux/version.h;
|
|
Automatically generate kernel/include/sensors.h;
|
|
Remove old gzipped modules; remove old misc directory if empty;
|
|
Remove pre-2.4 installation method;
|
|
-Wall now the default;
|
|
Add new targets user, user_install, and help;
|
|
Run depmod after module installation
|
|
Modules (all): Cleanups including
|
|
- Add #include <i2c-proc.h>
|
|
- C99 initializers
|
|
- Remove #ifdef MODULE
|
|
- Remove #ifndef THIS_MODULE
|
|
- Remove #ifndef MODULE_LICENSE
|
|
- Remove other 2.1/2.2 #ifdefs
|
|
- Remove #include "sensors.h", copy SYSCTL defs to module
|
|
- Remove excess #includes
|
|
- Remove argument in i2c_register_entry()
|
|
- Remove dummy xxx_command() definition
|
|
- Remove EXPORT_NO_SYMBOLS
|
|
- Remove init_MUTEX #define
|
|
- Remove xxx_inc_use() and xxx_dec_use() functions; modules
|
|
no longer adjust their own refcounts
|
|
- Use module_init() and module_exit()
|
|
- Update to new i2c_driver struct definition
|
|
Modules (bus PCI): Convert to PCI-module-style initialization
|
|
Modules (several): Add support for AMD Opteron VRM (VID) encoding
|
|
Module adm1021: Set alarm on failed reads and report old value;
|
|
merge changes from kernel 2.5.54
|
|
Module adm1026: New
|
|
Module bmcsensors: Fix compile when DEBUG=1
|
|
Modules ddcmon, eeprom: Use i2c block reads if possible;
|
|
better error handling
|
|
Module ds1307: Add to Makefile
|
|
Module gl520sm: Fix temperature over/hyst writes
|
|
Module lm75: merge changes from kernel 2.5.54
|
|
Module lm83: New
|
|
Module lm85: New
|
|
Module i2c-ali1535: Check for invalid transaction
|
|
Module i2c-ali15x3: Check for invalid transaction
|
|
Module i2c-amd756: merge changes from kernel 2.5.54;
|
|
check for invalid transaction
|
|
Module i2c-amd8111: merge changes from kernel 2.5.54
|
|
Module i2c-i801: Add support for 82801EB (ICH5)
|
|
Module i2c-i810: Fix for some chips
|
|
Module i2c-nforce2: New
|
|
Module i2c-piix4: Check for invalid transaction
|
|
Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
|
|
Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
|
|
north bridges; SiS962 and SiS963 south bridges
|
|
Module i2c-viapro: Check for invalid transaction
|
|
Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
|
|
pwm and pwm enable support; update docs
|
|
Module smbus-arp: Check adapter for HW or SW PEC support;
|
|
add reset option
|
|
Module w83781d: Add support for w83791d
|
|
Module w83627hf: New
|
|
Program decode-dimms.pl: Recognize DDR and Rambus
|
|
Program eeprom: Fix writes for small eeproms
|
|
Program eeprom, eepromer: Use local i2c-dev.h for build
|
|
Program fancontrol: New
|
|
Program lm_sensors.init: Call sensors -s in start()
|
|
Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
|
|
Add adm1026,lm85 support;
|
|
Remove sensors.c file; add sensors_compat.h;
|
|
Remove patches to i2c-core.c and drivers/char/mem.c;
|
|
Now works only for kernels 2.4.13 or later
|
|
Program p4b_smbus: Fix 'make install';
|
|
Install in same place as other modules;
|
|
Clear correct bits in config word
|
|
Program pwmconfig: New
|
|
Program sensors: add adm1026, lm85, w83791d support
|
|
Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
|
|
w83627hf, w83627thf, w83697hf);
|
|
Add support for SiS651, SiS961, SiS745, SiS746;
|
|
Support dmidecode 2.0 and later;
|
|
Fix "C" format error;
|
|
Add support for adm1026, 82801EB (ICH5), W83791D;
|
|
Add support for w83l785ts, nForce2;
|
|
Fix UTF-8 incompatibility;
|
|
Better support for lm75;
|
|
Add support for lm83
|
|
|
|
2.7.0 (20021208)
|
|
NOTE: Requires i2c-2.7.0 or newer.
|
|
File doc/busses/i2c-ali1535: Add license, miscellaneous changes
|
|
File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
|
|
File doc/busses/i2c-sis645: Add license
|
|
File doc/chips/lm92: Add license, features
|
|
File doc/chips/maxilife: Add license, parameters, features
|
|
File doc/chips/smartbatt: Complete rewrite
|
|
File doc/chips/vt8231: Add license, parameters
|
|
File sensors.conf.eg: Add section for lm75; complete the lm78 section
|
|
Library: Add support for MC1066; add multiple VRM version support for lm87;
|
|
enhance adm1023 support; initial support for Sony Vaio eeprom;
|
|
add support for bmcsensors; add hacks for additional dummy drivers
|
|
Makefile: Take kernel source location from /lib/modules/x.x.x/build;
|
|
add flags for x86_64 compiles
|
|
Module adm1021: Add support for MC1066
|
|
Module bmcsensors: New
|
|
Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
|
|
kernel 2.5.43; fix 2.2 kernel compiles
|
|
Module gl518sm: Iterate allowed only for rev 0x00
|
|
Module i2c-amd756: Configure base address for nForce support;
|
|
check for uninitialized base address;
|
|
add support for amd8111 (SMBus 1.0)
|
|
Module i2c-amd8111: New (SMBus 2.0)
|
|
Module i2c-ipmb: New
|
|
Module i2c-ipmi: New
|
|
Module i2c-keywest: Sync with kernel 2.4.20
|
|
Module i2c-sis630: Add support for SiS730
|
|
Module i2c-sis645: Improve support for SiS645/961;
|
|
add support for SiS645DX/961 and SiS735;
|
|
fix 2.2 kernel compiles
|
|
Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
|
|
Module lm87: Add multiple VRM version support
|
|
Module vt1211: Fix inx limits and alarms; fix in0
|
|
Module vt8231: Fix inx limits and alarms; fix in0
|
|
Module w83781d: Fix in0/in1 initialization
|
|
Module smartbatt: New
|
|
Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
|
|
Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
|
|
stop decoding on checksum error
|
|
Program dmidecode: Fix read bug; upgrade to version 1.8
|
|
Program doc-insmod: Complete rewrite; fix author output
|
|
Program doc-features: Complete rewrite; handle missing sysctl entries;
|
|
handle unknown prefix with suggestion
|
|
Program lm_sensors.init: Remove spaces bug; add green/red output
|
|
Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
|
|
Program rrd: Add sanity limits to newly-created RRD.
|
|
Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
|
|
Program sensors: Add support for MC1066, Rambus Rimms;
|
|
fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
|
|
initial support for Sony Vaio eeprom
|
|
Program sensors-detect: Add support for MC1066, smart battery, 8235,
|
|
IPMI, AMD8111; add help if no sensors found;
|
|
add ACPI method for IBM system detection;
|
|
work with old Perl versions again;
|
|
initial support for Sony Vaio eeprom
|
|
|
|
2.6.5 (20020915)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
|
|
Library: Fix fan3_div writes for w8378* and it87; add vt8231
|
|
Module dmi_scan: new
|
|
Module ds1621: Fix enable/disable
|
|
Module eeprom: Do not corrupt 24RF08's when checksum=1
|
|
Module i2c-i801: Check for uninitialized base address;
|
|
enable if not enabled
|
|
Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
|
|
Module i2c-sis630: new
|
|
Module i2c-sis645: new
|
|
Module lm92: Fix in-kernel initialization
|
|
Module via686a: Remove VT8231 support
|
|
Module vt8231: new
|
|
Module w83781: recognize Asus "ASB100 Bach" as AS99127F
|
|
Program dmidecode: new
|
|
Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
|
|
Program mkpatch: Add Config.in entries for, lm92,
|
|
pcf8574, pcf8591, smsc47m1, vt1211;
|
|
add dmi_scan
|
|
Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
|
|
Program lm_sensors.init: fix stop()
|
|
Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
|
|
add support for logging loadavg in RRD;
|
|
fix down-converting raw labels for RRD;
|
|
update chip support, still behind sensors
|
|
Program sensors: Add /usr/local/etc to config file path;
|
|
fix -c and -u flags; add vt8231
|
|
Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
|
|
refuse to run on IBM systems;
|
|
fix sysconfig module numbering;
|
|
change quick write to not corrupt 24RF08's
|
|
|
|
2.6.4 (20020719)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
File doc/vid: New
|
|
File include/sensors_vid.h: New
|
|
File sensors.conf.eg: Add vt1211, smsc47m1
|
|
Library: Add multiple VRM version support for adm1025, w83781d;
|
|
fix 'flex scanner jammed' on some systems;
|
|
add vt1211, smsc47m1, lm92;
|
|
fix access mode checking
|
|
Makefiles: For 2.4+ kernels, modules now install in
|
|
kernel/drivers/[i2c,sensors] , not misc/ , and
|
|
'make install' removes old versions in misc/ .
|
|
Use $CFLAGS and $CPPFLAGS if defined.
|
|
Module adm1025: Add multiple VID version support
|
|
Module ds1307: new
|
|
Module i2c-amd756: Add nVidia nForce support; fix block read length;
|
|
reliability improvements
|
|
Module i2c-hydra: Flush posted writes
|
|
Module i2c-i801: Add support for 82801DB (ICH4)
|
|
Module i2c-i810: Flush posted writes
|
|
Module i2c-savage4: new
|
|
Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
|
|
Module i2c-voodoo3: Flush posted writes
|
|
Module ds1307: New
|
|
Module lm92: New
|
|
Module smbus-arp: new
|
|
Module smsc47m1: new
|
|
Module via686a: Add support for VT8231 sensors
|
|
Module vt1211: new
|
|
Module w83781d: Add multiple VID version support; fix temp alarms
|
|
Program eeprom: new
|
|
Program i2cdump: Add smbus block command specification, add PEC support
|
|
Program lm_sensors.init: new
|
|
Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
|
|
pcf8574, pcf8591, smsc47m1, vt1211
|
|
Program p4b_smbus: Add support for ICH4
|
|
Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
|
|
Program sensord.init: Renamed, was prog/init/sensors
|
|
Program sensord: Major update, now requires rrd source;
|
|
not compiled by default
|
|
Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
|
|
(don't display algo. and adap.) option;
|
|
add vt1211, smsc47m1, lm92
|
|
Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
|
|
add 82801DB, LM85; fix perl warnings;
|
|
generate /etc/sysconfig/lm_sensors for
|
|
lm_sensors.init script
|
|
|
|
2.6.3 (20020322)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
|
|
File doc/chips/it87: add more temp_type help
|
|
File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
|
|
add adm1021 section; add lm87 AIN[1,2] template;
|
|
swap negative voltage limits for 782d,783s,627hf,
|
|
697hf,it87; add more it87 help; swap neg. voltage
|
|
limits for lm78(-j), lm79, w83781d, as99127f
|
|
Library: Add PCF8591, W83697HF, ADM1023 support;
|
|
fix w83* fan_min computes;
|
|
swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
|
|
Module adm1024: Add MODULE_LICENSE("GPL")
|
|
Module bt869: Add s-video out and DVD resolution support
|
|
Module eeprom: Add support for locations 128-255; rename /proc entries in hex
|
|
Module fscscy: implement min/max for voltages and fans
|
|
Module i2c-amd756: Add support for AMD768
|
|
Module i2c-i810: Add support for 810E
|
|
Module i2c-keywest: Big update, sync with kernel 2.4.18
|
|
Module i2c-piix4: Check for uninitialized base address
|
|
Module i2c-sis5595: Blacklist 645, 735
|
|
Module i2c-viapro: Check for uninitialized base address
|
|
Module gl518sm: Standardize /proc entries in0-3
|
|
Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
|
|
fan -> fan1; fix temp2 limit writes
|
|
Module pcf8574: Add support for PCF8574A; /proc interface changed
|
|
Module pcf8591: new
|
|
Module sis5595: Blacklist 645, 735
|
|
Module w83781d: Add W83697HF support; allow force_subclients parameter
|
|
for Tyan 2460
|
|
Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
|
|
Program decode-vaio.pl: new
|
|
Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
|
|
add text output
|
|
Program init/sensors: New SysV init script
|
|
Program mkpatch.pl: Add support for fscscy, add more help entries
|
|
Program p4b_smbus: new
|
|
Program rrd: Install summ_week.cgi
|
|
Program sensors: Add PCF8591, W83697HF, ADM1023 support,
|
|
clean up chassis intrusion prints
|
|
Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
|
|
fix Via686a and it87 detection;
|
|
add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
|
|
fix uninitialized values; it87 beats lm78
|
|
|
|
2.6.2 (20011118)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
Chip Modules (all): malloc.h -> slab.h
|
|
Modules (all): Add MODULE_LICENSE("GPL")
|
|
File doc/FAQ: More updates and additions
|
|
File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
|
|
Library: Add fscpos and fscscy support, fix gl520 in4 ID,
|
|
update it87 alarm ID's.
|
|
Module fscpos: new (Fujitsu-Siemens Poseidon driver)
|
|
Module fscscy: new (Fujitsu-Siemens Scylla driver)
|
|
Module i2c-amd756: Improve busy handling/printk's
|
|
Module i2c-i801: Add 82801CA/CAM support
|
|
Module i2c-keywest: Sync with PPC people, it works now
|
|
Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
|
|
Module i2c-viapro: Add Via VT8233 support
|
|
Module it87: Merge alarm_* /proc entries to alarms
|
|
Module sis5595: Fix support for rev B0
|
|
Module via686a: Make limit initializations reliable
|
|
Module w83781d: Allow init=0 parameter to bypass initialization
|
|
Program isadump: Add flat address space (PCI) support
|
|
Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
|
|
fscpos, it87, maxilife, mtp008
|
|
Program sensors: Fix w83781d temp precision
|
|
Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
|
|
Fujitsu Poseidon and Scylla,
|
|
Intel 82443MX and 82801CA/CAM detection,
|
|
add ITE 8172G detection (driver in kernel 2.4.10)
|
|
|
|
2.6.1 (20010830)
|
|
File BUGS: Updated
|
|
File doc/FAQ: More updates and additions
|
|
File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
|
|
File sensors.conf.eg: Fix/enhance it87 section
|
|
Library: ds1621 and it87 updates
|
|
Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
|
|
Module i2c-amd756: Add AMD 766 support
|
|
Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
|
|
Module i2c-piix4: Add Serverworks CSB5 support
|
|
Module i2c-sis5595: Recognize unsupported chips and refuse to load
|
|
Module adm1025: Fixed temp2 min/max writes
|
|
Module ds1621: Add 12-bit precision mode
|
|
Module it87: Enable all alarms, add in8 support, add sensor type selection
|
|
Module sensors: Don't initialize i2c-proc (moved to i2c-core);
|
|
remove support for module
|
|
Module sis5595: Recognize unsupported chips and refuse to load
|
|
Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
|
|
Program eepromer: new
|
|
Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
|
|
of sensors.c as a module in kernel
|
|
Program sensors: it87 updates; adjust temp. precision for some chips
|
|
Program sensors-detect: Fix ADM1024 and ADM1025 detection;
|
|
recognize unsupported SiS chips;
|
|
recognize AMD 766 and Serverworks CSB5.
|
|
|
|
2.6.0 (20010612)
|
|
NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
|
|
If your make fails because it can't find <linux/i2c-proc.h>, you
|
|
forgot this step!!!
|
|
File doc/FAQ: Many, many updates and additions
|
|
File doc/busses/i2c-sis5595: new
|
|
File doc/busses/i2c-tsunami: new
|
|
File doc/chips/it87: new
|
|
File doc/chips/via686a: Claim support for 686b.
|
|
File README.thinkpad: new
|
|
File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
|
|
Add lm87, adm9240, ds1780, lm81 templates;
|
|
Enhance help comments in file;
|
|
Add Tyan S2510 dual-MTP008 example;
|
|
Make separate sis5595 section.
|
|
Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
|
|
Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
|
|
Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
|
|
Add support for maxilife-nba and amd1024;
|
|
Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
|
|
Chip Modules (all ISA): Remove #include "i2c-isa.h"
|
|
Chip Modules (all): Change from sensors_* to i2c_* globals
|
|
for new i2c-proc.[ch]
|
|
Makefiles: enhance to support Alpha architecture
|
|
Module adm1021: Fix lm84 and gl523sm support
|
|
Module adm1024: new
|
|
Module i2c-i801: Chip detection cleanup
|
|
Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
|
|
Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
|
|
Module i2c-tsunami: New
|
|
Module i2c-via: Ensure i2c bus is tristated correctly.
|
|
Module it87: new driver for IT8705, IT8712, Sis950 chips
|
|
Module lm78: Recognize chipid=0x20
|
|
Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
|
|
Module mtp008: Fix temp initializations;
|
|
Save BIOS pin configuration of temps and fans;
|
|
Fix sensor type reads/writes and fan min writes;
|
|
Fix spurious invalid sensor type messages
|
|
Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
|
|
used for patched kernel now.
|
|
Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
|
|
Module sis5595: Fix temp, add in4 for chip revision 0xc0;
|
|
Allow force_addr=0xaddr
|
|
Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
|
|
Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
|
|
reading changes; Add messages for subclient
|
|
registration failure
|
|
Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
|
|
Program i2cset: new
|
|
Program isadump: fix for Alpha arch. compiles
|
|
Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
|
|
Remove ltc1710; Fix i2c_sis5595 typo;
|
|
Support kernel 2.4.5 makefile change;
|
|
Add i2c-tsunami; fixed i2c-voodoo3 configuration
|
|
Program sens_update_rrd: new
|
|
Program sensord: Add -d (debug) and -p (pid-file) options
|
|
Program sensors: Change reported version from 1.3 to the lm_sensors version;
|
|
Fix swapped limit and hysteresis on 9240, 5595, 686a;
|
|
Change mtp008 temps from max/min to limit/hyst;
|
|
Add maxilife-nba, adm1024, it87 support.
|
|
Program sensors-detect: Recognize lm78 with chipid=0x20;
|
|
Recognize SMSC Victory66 South Bridge;
|
|
Add devfs /dev/i2c/x support;
|
|
Add adm1024, it87xx support; Add thinkpad warning.
|
|
Program tellerstats: new
|
|
|
|
2.5.5 (20010115)
|
|
NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
|
|
you have kernel 2.4.0-prerelease or greater.
|
|
Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
|
|
File doc/developers/proc: new
|
|
File sensors.conf.eg: Add mtp008 entries, adm1025 entries
|
|
Library: Add ds1621, mtp008 support
|
|
Module adm1021: Add support for adm1021a / adm1023
|
|
Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
|
|
Module adm1025: Add support for remote temp; rename /proc entries to
|
|
in[0-5] and temp[1-2]; fix negative temp readings
|
|
Module adm9240: Rename /proc entries to in[0-5]
|
|
Module ddcmon: allow force and force_ddcmon parameters
|
|
Module ds1621: new
|
|
Module i2c-ali1535: Enhance error checking and recovery; add mutex
|
|
Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
|
|
Module i2c-piix4: add support for ServerWorks southbridge OSB4
|
|
Module lm87: cleanup, update voltage calculations
|
|
Module mtp008: new
|
|
Module pcf8574: change update time to 5 seconds
|
|
Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
|
|
Module w83781d: fix beep setting via /proc
|
|
Programs editticket, readticket: new
|
|
Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
|
|
Program mkpatch.pl: more fixes; now adds many more modules
|
|
Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
|
|
add adm1025 temp2; report temp limits correctly as
|
|
min/max or limit/hysteresis; print message if no
|
|
sensors are found. Removed false errors from lm87 reads.
|
|
Program sensors-detect: Add ds1621, mtp008 detection;
|
|
add ServerWorks detection
|
|
|
|
2.5.4 (20001012)
|
|
Module i2c-viapro: Add support for Via 596B (0x3051)
|
|
Program m7101: moved to CVS tree, updated for 2.4.0 kernels
|
|
Program mkpatch.pl: fixed infinite loop
|
|
Program sensors-detect: Detect Via 596B (0x3051)
|
|
|
|
2.5.3 (20001008)
|
|
NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
|
|
File useful_addresses.html: update
|
|
Library: Add lm87 support
|
|
Module pcf8574: new
|
|
Module i2c-ali1535: new
|
|
Module i2c-ali15x3: removed force #ifdef.
|
|
Module i2c-i801: support Intel 82801BA (815E chipset)
|
|
Module i2c-i801: add i2c block write support, fix smbus block bugs
|
|
(requires i2c 2.5.3 package)
|
|
Module i2c-i810: support Intel 82815
|
|
Module lm87: new
|
|
Module sensors: Fix for kernel 2.4.0-test8
|
|
(remove copy_to_user_ret and put_user_ret)
|
|
Module w83781d: limit fan divisors to 8 max. for as99127f
|
|
Program decode-dimms: Add html output option, update for SPD spec 1.2B.
|
|
Program i2cdump: Add smbus block read support
|
|
Programs i2cdetect, i2cdump: Improve error reporting
|
|
Program sensors: new switch -u (--unknown)
|
|
Program sensors-detect: detect Intel 82801BA (815E chipset)
|
|
Program sensors-detect: detect Intel 82815
|
|
Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
|
|
Program sensors-detect: detect National LM87
|
|
Program sensors-detect: detect nVidia devices supported by i2c-riva.o
|
|
Program sensors-detect: Improve error reporting
|
|
|
|
2.5.2 (20000709)
|
|
File sensors.conf.eg: Fix lm80 in8 calculation
|
|
Module w83781d: W83783S no longer crashes on unloading
|
|
Program sensors-detect: more robustness in case of unknown i2c adapters
|
|
Program sensors-detect, libsensors: fix eeprom size reporting
|
|
Program sensord: more flexibility, support for alarm scanning etc.
|
|
Program sensors: support for ignore setting on sensor alarms.
|
|
Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
|
|
|
|
2.5.1 (20000618)
|
|
Library: Add adm1025 support
|
|
Module adm1025: new
|
|
Module ddcmon: Fixed bus scan which could hang SMBus
|
|
Module i2c-keywest: new
|
|
Module maxilife: Add support for Maxilife '99 (NBA)
|
|
Module via686a: Enable sensors if not enabled by BIOS
|
|
Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
|
|
Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
|
|
Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
|
|
Module w83781d: Fis as99127f fan speed (was 66% too high)
|
|
Module w83781d: Improve beep input checking
|
|
Program i2cdump: Add Winbond-style bank selection
|
|
Program isadump: Add Winbond-style bank selection
|
|
Program sensors: Add adm1025 support.
|
|
Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
|
|
Program sensors-detect: Fix i801 detection, add adm1025 driver entry
|
|
File sensors.conf.eg: Add Maxilife '99 entries
|
|
File sensors.conf.eg: Remove some as99127f entries.
|
|
Note: For as99127f, reinstall sensors.conf.eg manually (make install
|
|
won't reinstall it) or else 'sensors -s' will fail.
|
|
|
|
2.5.0 (20000312)
|
|
Dropped all kernel 2.0 and 2.1 compatibility
|
|
Module i2c-i810: new
|
|
Module ddcmon: new
|
|
Module via686a: new
|
|
Module i2c-amd756: fixed region request
|
|
Module i2c-voodoo3: Converted to use i2c-algo-bit layer
|
|
Module w83781d: Don't change pin settings at initialization;
|
|
also fix chip detection.
|
|
Library: Support for ddcmon and via686a
|
|
Program sensors-detect: Support for ddcmon and via686a
|
|
Program sensors: Support for eeprom, ddcmon and via686a
|
|
|
|
2.4.5 (20000116)
|
|
Introduced DESTDIR installation prefix
|
|
Module lm80: fixes, temperature now read and set correctly
|
|
Module i2c-voodoo3: driver enhancements
|
|
Module w83781d: fixes, AS99127 works much better now
|
|
Library: New ignore keyword in config file
|
|
Programs: Support for new ignore keyword
|
|
Program sensors-detect: Support for MGA detections
|
|
|
|
2.4.4 (19991201)
|
|
Addition of the alpha release of AMD 756 SMBus host support.
|
|
Many fixes and updates to the gl518sm driver
|
|
Updates and fixes for device detection
|
|
|
|
2.4.0 (19990920)
|
|
Too much to list.
|
|
i2c and smbus parts are split off to a separate i2c package.
|
|
New drivers and other stuff.
|
|
|
|
2.3.4 (19990616)
|
|
Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
|
|
All: Now compiles against kernel 2.0.x (again ;)
|
|
Module gl518sm: some updates and refinements
|
|
|
|
2.3.3 (19990603)
|
|
All: Now compiles against kernel 2.3.x (x >= 1)
|
|
Module i2c-voodoo3: Timing issue fixes
|
|
Module bt869: Seems to be functional and relatively well tested
|
|
Many modules were modified to be more compatible with the new
|
|
Mutex structure in the new experimental kernels.
|
|
|
|
2.3.2 (19990507)
|
|
Module i2c-hydra: Now compiles on 2.0.x kernels
|
|
Module i2c-lm75: Slightly better detection
|
|
* New, but not compiled by default:
|
|
Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
|
|
Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
|
|
|
|
2.3.1 (19990501)
|
|
All: Now compiles on PPC
|
|
Module i2c-hydra: NEW
|
|
Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
|
|
Module w83781d: Removed deadlock (mutex was not initialized)
|
|
Documentation: A few glitches removed
|
|
Makefile: default module installation directory is now
|
|
/lib/modules/current/extra/misc
|
|
Program sensors-detect: PPC Hydra now detected
|
|
Program sensors: Now prints complete GL518SM information
|
|
Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
|
|
|
|
2.3.0 (19990422)
|
|
All: Many, many changes and improvements
|
|
All: Many small bugs and problems removed
|
|
Modules: New insmod parameters
|
|
Modules: Much improved chip detection
|
|
Module maxilife: NEW
|
|
Module adm1021: MAX1617A now also supported
|
|
Module adm9240: DS1780 now also supported
|
|
Module w83781d: W83782D and W83783S now also supported
|
|
Program sensors-detect: NEW
|
|
Library: All chips now supported
|
|
Documentation: Very much improved
|
|
|
|
2.2.2 (199903??)
|
|
Just some minor updates and bug fixes.
|
|
|
|
2.2.1 (19990218)
|
|
All: Removed compile warnings
|
|
Module i2c-dev: Small bug removed if DEBUG=1 was used
|
|
Module sis5595: Now compiles for 2.0 kernels
|
|
Module adm1021: Detection corrected
|
|
|
|
2.2.0 (19990216)
|
|
All: Set copyrights to include 1999
|
|
All: Small bugfixes
|
|
I2C: Upgraded to newest archive of Simon Vogl
|
|
Module i2c-dev: NEW
|
|
Module i2c-ali15x3: NEW
|
|
Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
|
|
directories, and somewhat improved
|
|
Module sis5595: NEW
|
|
Modules: Renamed all bus modules to i2c-*, new directory lay-out
|
|
Library: Support for new chip drivers, several small bugs fixed
|
|
Library manual pages: NEW
|
|
Program i2cdetect: Moved to detect directory
|
|
Program detect.pl: NEW
|
|
Program doc-features: NEW
|
|
Program sensors: Added man-page
|
|
Document BUGS: Added cdrom bug and kernel i2c conflict
|
|
|
|
2.1.2 (19990116)
|
|
Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
|
|
Module gl518sm.o: yet more bug fixes. It should at long last be usable now
|
|
Documentation in doc/kernel: NEW
|
|
|
|
2.1.1 (19990107)
|
|
Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
|
|
and older
|
|
Module gl518sm.o: Miscelaneous bugs and problems solved
|
|
Program isadump: NEW
|
|
|
|
2.1.0 (19981230)
|
|
Library: Completely NEW
|
|
Program sensors: NEW
|
|
Program grab_busses: NEW
|
|
Program decode-dimms: More information
|
|
Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
|
|
Module w83781d.o: NEW
|
|
Module lm80.o: NEW
|
|
Module gl518sm.o: new procfile beep, several small updates
|
|
Modules: Now use pin readings, no more scaling within the kernel (use the
|
|
library instead)
|
|
|
|
2.0.2 (19981214)
|
|
Module eeprom.o: NEW
|
|
Program decode-dimms: NEW
|
|
Modules: fill_inode fix, will stop segfaults on unloading in kernels after
|
|
2.1.58
|
|
Modules: Somewhat less verbose on transfers
|
|
Module lm78.o now recognizes and handles lm78-j and lm79
|
|
|
|
2.0.1 (1998121?)
|
|
Module gl518sm.o updates, to make it actually work
|
|
Module lm75.o high/low-byte swapping write bug fixed
|
|
|
|
2.0.0 (19981209)
|
|
Initial release
|