wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-17 10:59:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
e005f2f4edda87500a186fc9e89057084b3320be
lm-sensors/kernel/chips/adm1025.c
T
Kyosti Malkki 1cfe63804a (Kyösti) Cleanups 
Copy sysctl enums to chip drivers from sensors.h for now,
   as seen in drivers included in 2.5 tree. File no longer included
   from kernel side.

   Apply i2c-proc change in CVS tagged -km2.

   Partial clean and sort of includes everywhere.

   Add i2c-dev.h, as a partial copy from i2c.
   Add to sensors.h from i2c-proc.h to compile things.
   Remove i2c-isa.h.

   Reflect header file changes to lib/ and prog/.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1705 7894878c-1315-0410-8ee3-d5d059ff63e0
2003-01-21 20:01:27 +00:00

715 lines
23 KiB
C
Raw Blame History

/*
adm1025.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Add by Gordon Wu <gwu@esoft.com> according to the adm9240.c written by
Frodo Looijaard <frodol@dds.nl>
and Philip Edelbrock <phil@netroedge.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Supports the Analog Devices ADM1025. See doc/chips/adm1025 for details */
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/sysctl.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/i2c-proc.h>
#include <linux/init.h>
#include <asm/errno.h>
#include <asm/io.h>
#include "version.h"
#include "sensors_vid.h"
MODULE_LICENSE("GPL");
/* Addresses to scan */
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { 0x2c, 0x2e, SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_1(adm1025);
/* Many ADM1025 constants specified below */
#define ADM1025_REG_IN_MAX(nr) (0x2b + (nr) * 2)
#define ADM1025_REG_IN_MIN(nr) (0x2c + (nr) * 2)
#define ADM1025_REG_IN(nr) (0x20 + (nr))
/* The ADM1025 registers */
#define ADM1025_REG_TEST 0x15
/* These are all read-only */
#define ADM1025_REG_2_5V 0x20
#define ADM1025_REG_VCCP1 0x21
#define ADM1025_REG_3_3V 0x22
#define ADM1025_REG_5V 0x23
#define ADM1025_REG_12V 0x24
#define ADM1025_REG_VCC 0x25
#define ADM1025_REG_RTEMP 0x26
#define ADM1025_REG_TEMP 0x27
#define ADM1025_REG_COMPANY_ID 0x3E /* 0x41 for ADM1025 */
#define ADM1025_REG_DIE_REV 0x3F
/* These are read/write */
#define ADM1025_REG_2_5V_HIGH 0x2B
#define ADM1025_REG_2_5V_LOW 0x2C
#define ADM1025_REG_VCCP1_HIGH 0x2D
#define ADM1025_REG_VCCP1_LOW 0x2E
#define ADM1025_REG_3_3V_HIGH 0x2F
#define ADM1025_REG_3_3V_LOW 0x30
#define ADM1025_REG_5V_HIGH 0x31
#define ADM1025_REG_5V_LOW 0x32
#define ADM1025_REG_12V_HIGH 0x33
#define ADM1025_REG_12V_LOW 0x34
#define ADM1025_REG_VCC_HIGH 0x35
#define ADM1025_REG_VCC_LOW 0x36
#define ADM1025_REG_RTEMP_HIGH 0x37
#define ADM1025_REG_RTEMP_LOW 0x38
#define ADM1025_REG_TEMP_HIGH 0x39
#define ADM1025_REG_TEMP_LOW 0x3A
#define ADM1025_REG_CONFIG 0x40
#define ADM1025_REG_INT1_STAT 0x41
#define ADM1025_REG_INT2_STAT 0x42
#define ADM1025_REG_VID 0x47
#define ADM1025_REG_VID4 0x49
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. Note that you should be a bit careful with which arguments
these macros are called: arguments may be evaluated more than once.
Fixing this is just not worth it. */
#define IN_TO_REG(val,nr) (SENSORS_LIMIT(((val) & 0xff),0,255))
#define IN_FROM_REG(val,nr) (val)
#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*10)
#define TEMP_LIMIT_FROM_REG(val) TEMP_FROM_REG(val)
#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT(((val)<0?(((val)-5)/10):\
((val)+5)/10), 0, 255)
#define ALARMS_FROM_REG(val) (val)
/* Initial limits */
#define ADM1025_INIT_IN_0 190
#define ADM1025_INIT_IN_1 190
#define ADM1025_INIT_IN_2 190
#define ADM1025_INIT_IN_3 190
#define ADM1025_INIT_IN_4 190
#define ADM1025_INIT_IN_5 190
#define ADM1025_INIT_IN_PERCENTAGE 10
#define ADM1025_INIT_IN_MIN_0 \
(ADM1025_INIT_IN_0 - ADM1025_INIT_IN_0 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MAX_0 \
(ADM1025_INIT_IN_0 + ADM1025_INIT_IN_0 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MIN_1 \
(ADM1025_INIT_IN_1 - ADM1025_INIT_IN_1 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MAX_1 \
(ADM1025_INIT_IN_1 + ADM1025_INIT_IN_1 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MIN_2 \
(ADM1025_INIT_IN_2 - ADM1025_INIT_IN_2 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MAX_2 \
(ADM1025_INIT_IN_2 + ADM1025_INIT_IN_2 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MIN_3 \
(ADM1025_INIT_IN_3 - ADM1025_INIT_IN_3 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MAX_3 \
(ADM1025_INIT_IN_3 + ADM1025_INIT_IN_3 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MIN_4 \
(ADM1025_INIT_IN_4 - ADM1025_INIT_IN_4 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MAX_4 \
(ADM1025_INIT_IN_4 + ADM1025_INIT_IN_4 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MIN_5 \
(ADM1025_INIT_IN_5 - ADM1025_INIT_IN_5 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_IN_MAX_5 \
(ADM1025_INIT_IN_5 + ADM1025_INIT_IN_5 * ADM1025_INIT_IN_PERCENTAGE / 100)
#define ADM1025_INIT_RTEMP_MAX 600
#define ADM1025_INIT_RTEMP_MIN 0
#define ADM1025_INIT_TEMP_MAX 600
#define ADM1025_INIT_TEMP_MIN 0
/* For each registered ADM1025, we need to keep some data in memory. That
data is pointed to by adm1025_list[NR]->data. The structure itself is
dynamically allocated, at the same time when a new adm1025 client is
allocated. */
struct adm1025_data {
int sysctl_id;
enum chips type;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 in[6]; /* Register value */
u8 in_max[6]; /* Register value */
u8 in_min[6]; /* Register value */
u8 rtemp; /* Register value */
u8 rtemp_max; /* Register value */
u8 rtemp_min; /* Register value */
u8 temp; /* Register value */
u8 temp_max; /* Register value */
u8 temp_min; /* Register value */
u16 alarms; /* Register encoding, combined */
u8 analog_out; /* Register value */
u8 vid; /* Register value combined */
u8 vrm;
};
static int adm1025_attach_adapter(struct i2c_adapter *adapter);
static int adm1025_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind);
static int adm1025_detach_client(struct i2c_client *client);
static int adm1025_read_value(struct i2c_client *client, u8 register);
static int adm1025_write_value(struct i2c_client *client, u8 register,
u8 value);
static void adm1025_update_client(struct i2c_client *client);
static void adm1025_init_client(struct i2c_client *client);
static void adm1025_in(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void adm1025_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void adm1025_rm_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void adm1025_alarms(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
/*static void adm1025_analog_out(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag,
long *results);*/
static void adm1025_vid(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void adm1025_vrm(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
/* I choose here for semi-static ADM1025 allocation. Complete dynamic
allocation could also be used; the code needed for this would probably
take more memory than the datastructure takes now. */
static int adm1025_id = 0;
static struct i2c_driver adm1025_driver = {
.owner = THIS_MODULE,
.name = "ADM1025 sensor driver",
.id = I2C_DRIVERID_ADM1025,
.flags = I2C_DF_NOTIFY,
.attach_adapter = adm1025_attach_adapter,
.detach_client = adm1025_detach_client,
};
/* The /proc/sys entries */
/* -- SENSORS SYSCTL START -- */
#define ADM1025_SYSCTL_IN0 1000 /* Volts * 100 */
#define ADM1025_SYSCTL_IN1 1001
#define ADM1025_SYSCTL_IN2 1002
#define ADM1025_SYSCTL_IN3 1003
#define ADM1025_SYSCTL_IN4 1004
#define ADM1025_SYSCTL_IN5 1005
#define ADM1025_SYSCTL_RTEMP 1251
#define ADM1025_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
#define ADM1025_SYSCTL_ALARMS 2001 /* bitvector */
#define ADM1025_SYSCTL_ANALOG_OUT 2002
#define ADM1025_SYSCTL_VID 2003
#define ADM1025_SYSCTL_VRM 2004
#define ADM1025_ALARM_IN0 0x0001
#define ADM1025_ALARM_IN1 0x0002
#define ADM1025_ALARM_IN2 0x0004
#define ADM1025_ALARM_IN3 0x0008
#define ADM1025_ALARM_IN4 0x0100
#define ADM1025_ALARM_IN5 0x0200
#define ADM1025_ALARM_RTEMP 0x0020
#define ADM1025_ALARM_TEMP 0x0010
/* -- SENSORS SYSCTL END -- */
/* These files are created for each detected ADM1025. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table adm1025_dir_table_template[] = {
{ADM1025_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_in},
{ADM1025_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_in},
{ADM1025_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_in},
{ADM1025_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_in},
{ADM1025_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_in},
{ADM1025_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_in},
{ADM1025_SYSCTL_RTEMP, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_rm_temp},
{ADM1025_SYSCTL_TEMP, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_temp},
{ADM1025_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_alarms},
/* {ADM1025_SYSCTL_ANALOG_OUT, "analog_out", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_analog_out},*/
{ADM1025_SYSCTL_VID, "vid", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_vid},
{ADM1025_SYSCTL_VRM, "vrm", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &adm1025_vrm},
{0}
};
static int adm1025_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, adm1025_detect);
}
static int adm1025_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind)
{
int i;
struct i2c_client *new_client;
struct adm1025_data *data;
int err = 0;
const char *type_name = "";
const char *client_name = "";
/* Make sure we aren't probing the ISA bus!! This is just a safety check
at this moment; i2c_detect really won't call us. */
#ifdef DEBUG
if (i2c_is_isa_adapter(adapter)) {
printk
("adm1025.o: adm1025_detect called for an ISA bus adapter?!?\n");
return 0;
}
#endif
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto ERROR0;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access adm1025_{read,write}_value. */
if (!(new_client = kmalloc(sizeof(struct i2c_client) +
sizeof(struct adm1025_data),
GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
data = (struct adm1025_data *) (new_client + 1);
new_client->addr = address;
new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &adm1025_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
if (kind < 0) {
if((adm1025_read_value(new_client,ADM1025_REG_CONFIG) & 0x80) != 0x00)
goto ERROR1;
}
/* Determine the chip type. */
if (kind <= 0) {
i = adm1025_read_value(new_client, ADM1025_REG_COMPANY_ID);
if (i == 0x41)
kind = adm1025;
else {
if (kind == 0)
printk
("adm1025.o: Ignoring 'force' parameter for unknown chip at "
"adapter %d, address 0x%02x\n",
i2c_adapter_id(adapter), address);
goto ERROR1;
}
}
if (kind == adm1025) {
type_name = "adm1025";
client_name = "ADM1025 chip";
} else {
#ifdef DEBUG
printk("adm1025.o: Internal error: unknown kind (%d)?!?",
kind);
#endif
goto ERROR1;
}
/* Fill in the remaining client fields and put it into the global list */
strcpy(new_client->name, client_name);
data->type = kind;
new_client->id = adm1025_id++;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((i = i2c_register_entry(new_client,
type_name,
adm1025_dir_table_template)) < 0) {
err = i;
goto ERROR4;
}
data->sysctl_id = i;
/* Initialize the ADM1025 chip */
adm1025_init_client(new_client);
return 0;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
i2c_detach_client(new_client);
ERROR3:
ERROR1:
kfree(new_client);
ERROR0:
return err;
}
static int adm1025_detach_client(struct i2c_client *client)
{
int err;
i2c_deregister_entry(((struct adm1025_data *) (client->data))->
sysctl_id);
if ((err = i2c_detach_client(client))) {
printk
("adm1025.o: Client deregistration failed, client not detached.\n");
return err;
}
kfree(client);
return 0;
}
static int adm1025_read_value(struct i2c_client *client, u8 reg)
{
return 0xFF & i2c_smbus_read_byte_data(client, reg);
}
static int adm1025_write_value(struct i2c_client *client, u8 reg, u8 value)
{
return i2c_smbus_write_byte_data(client, reg, value);
}
/* Called when we have found a new ADM1025. It should set limits, etc. */
static void adm1025_init_client(struct i2c_client *client)
{
struct adm1025_data *data = client->data;
data->vrm = DEFAULT_VRM;
/* Reset all except Watchdog values and last conversion values
This sets fan-divs to 2, among others. This makes most other
initializations unnecessary */
adm1025_write_value(client, ADM1025_REG_CONFIG, 0x80);
adm1025_write_value(client, ADM1025_REG_IN_MIN(0),
IN_TO_REG(ADM1025_INIT_IN_MIN_0, 0));
adm1025_write_value(client, ADM1025_REG_IN_MAX(0),
IN_TO_REG(ADM1025_INIT_IN_MAX_0, 0));
adm1025_write_value(client, ADM1025_REG_IN_MIN(1),
IN_TO_REG(ADM1025_INIT_IN_MIN_1, 1));
adm1025_write_value(client, ADM1025_REG_IN_MAX(1),
IN_TO_REG(ADM1025_INIT_IN_MAX_1, 1));
adm1025_write_value(client, ADM1025_REG_IN_MIN(2),
IN_TO_REG(ADM1025_INIT_IN_MIN_2, 2));
adm1025_write_value(client, ADM1025_REG_IN_MAX(2),
IN_TO_REG(ADM1025_INIT_IN_MAX_2, 2));
adm1025_write_value(client, ADM1025_REG_IN_MIN(3),
IN_TO_REG(ADM1025_INIT_IN_MIN_3, 3));
adm1025_write_value(client, ADM1025_REG_IN_MAX(3),
IN_TO_REG(ADM1025_INIT_IN_MAX_3, 3));
adm1025_write_value(client, ADM1025_REG_IN_MIN(4),
IN_TO_REG(ADM1025_INIT_IN_MIN_4, 4));
adm1025_write_value(client, ADM1025_REG_IN_MAX(4),
IN_TO_REG(ADM1025_INIT_IN_MAX_4, 4));
adm1025_write_value(client, ADM1025_REG_IN_MIN(5),
IN_TO_REG(ADM1025_INIT_IN_MIN_5, 5));
adm1025_write_value(client, ADM1025_REG_IN_MAX(5),
IN_TO_REG(ADM1025_INIT_IN_MAX_5, 5));
adm1025_write_value(client, ADM1025_REG_RTEMP_HIGH,
TEMP_LIMIT_TO_REG(ADM1025_INIT_RTEMP_MAX));
adm1025_write_value(client, ADM1025_REG_RTEMP_LOW,
TEMP_LIMIT_TO_REG(ADM1025_INIT_RTEMP_MIN));
adm1025_write_value(client, ADM1025_REG_TEMP_HIGH,
TEMP_LIMIT_TO_REG(ADM1025_INIT_TEMP_MAX));
adm1025_write_value(client, ADM1025_REG_TEMP_LOW,
TEMP_LIMIT_TO_REG(ADM1025_INIT_TEMP_MIN));
/* Start monitoring */
adm1025_write_value(client, ADM1025_REG_CONFIG, 0x01);
}
static void adm1025_update_client(struct i2c_client *client)
{
struct adm1025_data *data = client->data;
u8 i;
down(&data->update_lock);
if (
(jiffies - data->last_updated >
(data->type == adm1025 ? HZ / 2 : HZ * 2))
|| (jiffies < data->last_updated) || !data->valid) {
#ifdef DEBUG
printk("Starting adm1025 update\n");
#endif
for (i = 0; i <= 5; i++) {
data->in[i] =
adm1025_read_value(client, ADM1025_REG_IN(i));
data->in_min[i] =
adm1025_read_value(client,
ADM1025_REG_IN_MIN(i));
data->in_max[i] =
adm1025_read_value(client,
ADM1025_REG_IN_MAX(i));
}
data->temp =
adm1025_read_value(client, ADM1025_REG_TEMP);
data->rtemp =
adm1025_read_value(client, ADM1025_REG_RTEMP);
#ifdef DEBUG
printk("The temp is %2x\n",data->temp);
#endif
data->temp_max =
adm1025_read_value(client, ADM1025_REG_TEMP_HIGH);
data->temp_min =
adm1025_read_value(client, ADM1025_REG_TEMP_LOW);
data->rtemp_max =
adm1025_read_value(client, ADM1025_REG_RTEMP_HIGH);
data->rtemp_min =
adm1025_read_value(client, ADM1025_REG_RTEMP_LOW);
i = adm1025_read_value(client, ADM1025_REG_VID);
data->vid = i & 0x0f;
data->vid |=
(adm1025_read_value(client, ADM1025_REG_VID4) & 0x01)
<< 4;
data->alarms =
adm1025_read_value(client,
ADM1025_REG_INT1_STAT) +
(adm1025_read_value(client, ADM1025_REG_INT2_STAT) <<
8);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void adm1025_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
int scales[6] = { 250, 225, 330, 500, 1200, 330 };
struct adm1025_data *data = client->data;
int nr = ctl_name - ADM1025_SYSCTL_IN0;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
adm1025_update_client(client);
results[0] =
IN_FROM_REG(data->in_min[nr], nr) * scales[nr] / 192;
results[1] =
IN_FROM_REG(data->in_max[nr], nr) * scales[nr] / 192;
results[2] =
IN_FROM_REG(data->in[nr], nr) * scales[nr] / 192;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->in_min[nr] =
IN_TO_REG((results[0] * 192) / scales[nr], nr);
adm1025_write_value(client, ADM1025_REG_IN_MIN(nr),
data->in_min[nr]);
}
if (*nrels_mag >= 2) {
data->in_max[nr] =
IN_TO_REG((results[1] * 192) / scales[nr], nr);
adm1025_write_value(client, ADM1025_REG_IN_MAX(nr),
data->in_max[nr]);
}
}
}
void adm1025_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct adm1025_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
adm1025_update_client(client);
results[0] = TEMP_LIMIT_FROM_REG(data->temp_max);
results[1] = TEMP_LIMIT_FROM_REG(data->temp_min);
results[2] = TEMP_FROM_REG(data->temp);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->temp_max = TEMP_LIMIT_TO_REG(results[0]);
adm1025_write_value(client, ADM1025_REG_TEMP_HIGH,
data->temp_max);
}
if (*nrels_mag >= 2) {
data->temp_min = TEMP_LIMIT_TO_REG(results[1]);
adm1025_write_value(client, ADM1025_REG_TEMP_LOW,
data->temp_min);
}
}
}
void adm1025_rm_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct adm1025_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
adm1025_update_client(client);
results[0] = TEMP_LIMIT_FROM_REG(data->rtemp_max);
results[1] = TEMP_LIMIT_FROM_REG(data->rtemp_min);
results[2] = TEMP_FROM_REG(data->rtemp);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->rtemp_max = TEMP_LIMIT_TO_REG(results[0]);
adm1025_write_value(client, ADM1025_REG_RTEMP_HIGH,
data->rtemp_max);
}
if (*nrels_mag >= 2) {
data->rtemp_min = TEMP_LIMIT_TO_REG(results[1]);
adm1025_write_value(client, ADM1025_REG_RTEMP_LOW,
data->rtemp_min);
}
}
}
void adm1025_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct adm1025_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
adm1025_update_client(client);
results[0] = ALARMS_FROM_REG(data->alarms);
*nrels_mag = 1;
}
}
/*
void adm1025_analog_out(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results)
{
struct adm1025_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
adm1025_update_client(client);
results[0] = data->analog_out;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->analog_out = results[0];
adm1025_write_value(client, ADM1025_REG_ANALOG_OUT,
data->analog_out);
}
}
}
*/
void adm1025_vid(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct adm1025_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 3;
else if (operation == SENSORS_PROC_REAL_READ) {
adm1025_update_client(client);
results[0] = vid_from_reg(data->vid, data->vrm);
*nrels_mag = 1;
}
}
void adm1025_vrm(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct adm1025_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
results[0] = data->vrm;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1)
data->vrm = results[0];
}
}
static int __init sm_adm1025_init(void)
{
printk("adm1025.o version %s (%s)\n", LM_VERSION, LM_DATE);
return i2c_add_driver(&adm1025_driver);
}
static void __exit sm_adm1025_exit(void)
{
i2c_del_driver(&adm1025_driver);
}
MODULE_AUTHOR
("Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("ADM1025 driver");
module_init(sm_adm1025_init);
module_exit(sm_adm1025_exit);
Reference in new issue View Git Blame Copy Permalink