wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-16 10:49:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
e005f2f4edda87500a186fc9e89057084b3320be
lm-sensors/kernel/chips/fscscy.c
T
Kyosti Malkki 1cfe63804a (Kyösti) Cleanups 
Copy sysctl enums to chip drivers from sensors.h for now,
   as seen in drivers included in 2.5 tree. File no longer included
   from kernel side.

   Apply i2c-proc change in CVS tagged -km2.

   Partial clean and sort of includes everywhere.

   Add i2c-dev.h, as a partial copy from i2c.
   Add to sensors.h from i2c-proc.h to compile things.
   Remove i2c-isa.h.

   Reflect header file changes to lib/ and prog/.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1705 7894878c-1315-0410-8ee3-d5d059ff63e0
2003-01-21 20:01:27 +00:00

922 lines
34 KiB
C
Raw Blame History

/*
fscscy.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
fujitsu siemens scylla chip,
module based on lm80.c, fscpos.c
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
and Philip Edelbrock <phil@netroedge.com>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/sysctl.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/i2c-proc.h>
#include <linux/init.h>
#include <asm/errno.h>
#include <asm/io.h>
#include "version.h"
MODULE_LICENSE("GPL");
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x73, SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_1(fscscy);
/* The FSCSCY registers */
/* chip identification */
#define FSCSCY_REG_IDENT_0 0x00
#define FSCSCY_REG_IDENT_1 0x01
#define FSCSCY_REG_IDENT_2 0x02
#define FSCSCY_REG_REVISION 0x03
/* global control and status */
#define FSCSCY_REG_EVENT_STATE 0x04
#define FSCSCY_REG_CONTROL 0x05
/* watchdog */
#define FSCSCY_REG_WDOG_PRESET 0x28
#define FSCSCY_REG_WDOG_STATE 0x23
#define FSCSCY_REG_WDOG_CONTROL 0x21
/*
** Fan definitions
**
** _RPMMIN: Minimum speed. Can be set via interface, but only for three of the fans
** FAN1_RPMMIN is wired to Fan 0 (CPU Fans)
** FAN4_RPMMIN is wired to Fan 2 (PS Fans ??)
** FAN5_RPMMIN is wired to Fan 3 (AUX Fans ??)
** _ACT: Actual Fan Speed
** _STATE: Fan status register
** _RIPPLE: Fan speed multiplier
*/
/* fan 0 */
#define FSCSCY_REG_FAN0_RPMMIN 0x65
#define FSCSCY_REG_FAN0_ACT 0x6b
#define FSCSCY_REG_FAN0_STATE 0x62
#define FSCSCY_REG_FAN0_RIPPLE 0x6f
/* fan 1 */
#define FSCSCY_REG_FAN1_RPMMIN FSCSCY_REG_FAN0_RPMMIN
#define FSCSCY_REG_FAN1_ACT 0x6c
#define FSCSCY_REG_FAN1_STATE 0x61
#define FSCSCY_REG_FAN1_RIPPLE 0x6f
/* fan 2 */
#define FSCSCY_REG_FAN2_RPMMIN 0x55
#define FSCSCY_REG_FAN2_ACT 0x0e
#define FSCSCY_REG_FAN2_STATE 0x0d
#define FSCSCY_REG_FAN2_RIPPLE 0x0f
/* fan 3 */
#define FSCSCY_REG_FAN3_RPMMIN 0xa5
#define FSCSCY_REG_FAN3_ACT 0xab
#define FSCSCY_REG_FAN3_STATE 0xa2
#define FSCSCY_REG_FAN3_RIPPLE 0xaf
/* fan 4 */
#define FSCSCY_REG_FAN4_RPMMIN FSCSCY_REG_FAN2_RPMMIN
#define FSCSCY_REG_FAN4_ACT 0x5c
#define FSCSCY_REG_FAN4_STATE 0x52
#define FSCSCY_REG_FAN4_RIPPLE 0x0f
/* fan 5 */
#define FSCSCY_REG_FAN5_RPMMIN FSCSCY_REG_FAN3_RPMMIN
#define FSCSCY_REG_FAN5_ACT 0xbb
#define FSCSCY_REG_FAN5_STATE 0xb2
#define FSCSCY_REG_FAN5_RIPPLE 0xbf
/* voltage supervision */
#define FSCSCY_REG_VOLT_12 0x45
#define FSCSCY_REG_VOLT_5 0x42
#define FSCSCY_REG_VOLT_BATT 0x48
/* temperatures */
/* sensor 0 */
#define FSCSCY_REG_TEMP0_ACT 0x64
#define FSCSCY_REG_TEMP0_STATE 0x71
#define FSCSCY_REG_TEMP0_LIM 0x76
/* sensor 1 */
#define FSCSCY_REG_TEMP1_ACT 0xD0
#define FSCSCY_REG_TEMP1_STATE 0xD1
#define FSCSCY_REG_TEMP1_LIM 0xD6
/* sensor 2 */
#define FSCSCY_REG_TEMP2_ACT 0x32
#define FSCSCY_REG_TEMP2_STATE 0x81
#define FSCSCY_REG_TEMP2_LIM 0x86
/* sensor3 */
#define FSCSCY_REG_TEMP3_ACT 0x35
#define FSCSCY_REG_TEMP3_STATE 0x91
#define FSCSCY_REG_TEMP3_LIM 0x96
/* PCI Load */
#define FSCSCY_REG_PCILOAD 0x1a
/* Intrusion Sensor */
#define FSCSCY_REG_INTR_STATE 0x13
#define FSCSCY_REG_INTR_CTRL 0x12
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. Note that you should be a bit careful with which arguments
these macros are called: arguments may be evaluated more than once.
Fixing this is just not worth it. */
#define IN_TO_REG(val,nr) (SENSORS_LIMIT((val),0,255))
#define IN_FROM_REG(val,nr) (val)
/* Initial limits */
/* For each registered FSCSCY, we need to keep some data in memory. That
data is pointed to by fscscy_list[NR]->data. The structure itself is
dynamically allocated, at the same time when a new fscscy client is
allocated. */
struct fscscy_data {
int sysctl_id;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 revision; /* revision of chip */
u8 global_event; /* global event status */
u8 global_control; /* global control register */
u8 watchdog[3]; /* watchdog */
u8 volt[3]; /* 12, 5, battery current */
u8 volt_min[3]; /* minimum voltages over module "lifetime" */
u8 volt_max[3]; /* maximum voltages over module "lifetime" */
u8 temp_act[4]; /* temperature */
u8 temp_status[4]; /* status of temp. sensor */
u8 temp_lim[4]; /* limit temperature of temp. sensor */
u8 temp_min[4]; /* minimum of temp. sensor, this is just calculated by the module */
u8 temp_max[4]; /* maximum of temp. sensor, this is just calculsted by the module */
u8 fan_act[6]; /* fans revolutions per second */
u8 fan_status[6]; /* fan status */
u8 fan_rpmmin[6]; /* fan min value for rps */
u8 fan_ripple[6]; /* divider for rps */
u8 fan_min[6]; /* minimum RPM over module "lifetime" */
u8 fan_max[6]; /* maximum RPM over module "lifetime" */
u8 pciload; /* PCILoad value */
u8 intr_status; /* Intrusion Status */
u8 intr_control; /* Intrusion Control */
};
static int fscscy_attach_adapter(struct i2c_adapter *adapter);
static int fscscy_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind);
static int fscscy_detach_client(struct i2c_client *client);
static int fscscy_read_value(struct i2c_client *client, u8 register);
static int fscscy_write_value(struct i2c_client *client, u8 register,
u8 value);
static void fscscy_update_client(struct i2c_client *client);
static void fscscy_init_client(struct i2c_client *client);
static void fscscy_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void fscscy_fan(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_fan_internal(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results,
int nr, int reg_state, int reg_min, int res_ripple);
static void fscscy_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_volt(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_wdog(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_pciload(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_intrusion(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static int fscscy_id = 0;
static struct i2c_driver fscscy_driver = {
.owner = THIS_MODULE,
.name = "FSCSCY sensor driver",
.id = I2C_DRIVERID_FSCSCY,
.flags = I2C_DF_NOTIFY,
.attach_adapter = fscscy_attach_adapter,
.detach_client = fscscy_detach_client,
};
/* The /proc/sys entries */
/* -- SENSORS SYSCTL START -- */
#define FSCSCY_SYSCTL_VOLT0 1000 /* 12 volt supply */
#define FSCSCY_SYSCTL_VOLT1 1001 /* 5 volt supply */
#define FSCSCY_SYSCTL_VOLT2 1002 /* batterie voltage*/
#define FSCSCY_SYSCTL_FAN0 1101 /* state, min, ripple, actual value fan 0 */
#define FSCSCY_SYSCTL_FAN1 1102 /* state, min, ripple, actual value fan 1 */
#define FSCSCY_SYSCTL_FAN2 1103 /* state, min, ripple, actual value fan 2 */
#define FSCSCY_SYSCTL_FAN3 1104 /* state, min, ripple, actual value fan 3 */
#define FSCSCY_SYSCTL_FAN4 1105 /* state, min, ripple, actual value fan 4 */
#define FSCSCY_SYSCTL_FAN5 1106 /* state, min, ripple, actual value fan 5 */
#define FSCSCY_SYSCTL_TEMP0 1201 /* state and value of sensor 0, cpu die */
#define FSCSCY_SYSCTL_TEMP1 1202 /* state and value of sensor 1, motherboard */
#define FSCSCY_SYSCTL_TEMP2 1203 /* state and value of sensor 2, chassis */
#define FSCSCY_SYSCTL_TEMP3 1204 /* state and value of sensor 3, chassis */
#define FSCSCY_SYSCTL_REV 2000 /* Revision */
#define FSCSCY_SYSCTL_EVENT 2001 /* global event status */
#define FSCSCY_SYSCTL_CONTROL 2002 /* global control byte */
#define FSCSCY_SYSCTL_WDOG 2003 /* state, min, ripple, actual value fan 2 */
#define FSCSCY_SYSCTL_PCILOAD 2004 /* PCILoad value */
#define FSCSCY_SYSCTL_INTRUSION 2005 /* state, control for intrusion sensor */
/* -- SENSORS SYSCTL END -- */
/* These files are created for each detected FSCSCY. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table fscscy_dir_table_template[] = {
{FSCSCY_SYSCTL_REV, "rev", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_in},
{FSCSCY_SYSCTL_EVENT, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_in},
{FSCSCY_SYSCTL_CONTROL, "control", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_in},
{FSCSCY_SYSCTL_TEMP0, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_TEMP1, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_TEMP2, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_TEMP3, "temp4", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_VOLT0, "in0", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_volt},
{FSCSCY_SYSCTL_VOLT1, "in1", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_volt},
{FSCSCY_SYSCTL_VOLT2, "in2", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_volt},
{FSCSCY_SYSCTL_FAN0, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN1, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN2, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN3, "fan4", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN4, "fan5", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN5, "fan6", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_WDOG, "wdog", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_wdog},
{FSCSCY_SYSCTL_PCILOAD, "pciload", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_pciload},
{FSCSCY_SYSCTL_INTRUSION, "intrusion", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_intrusion},
{0}
};
static int fscscy_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, fscscy_detect);
}
int fscscy_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind)
{
int i;
struct i2c_client *new_client;
struct fscscy_data *data;
int err = 0;
const char *type_name, *client_name;
/* Make sure we aren't probing the ISA bus!! This is just a safety check
at this moment; i2c_detect really won't call us. */
#ifdef DEBUG
if (i2c_is_isa_adapter(adapter)) {
printk
("fscscy.o: fscscy_detect called for an ISA bus adapter?!?\n");
return 0;
}
#endif
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto ERROR0;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access fscscy_{read,write}_value. */
if (!(new_client = kmalloc(sizeof(struct i2c_client) +
sizeof(struct fscscy_data),
GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
data = (struct fscscy_data *) (new_client + 1);
new_client->addr = address;
new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &fscscy_driver;
new_client->flags = 0;
/* Do the remaining detection unless force or force_fscscy parameter */
if (kind < 0) {
if (fscscy_read_value(new_client, FSCSCY_REG_IDENT_0) != 0x53)
goto ERROR1;
if (fscscy_read_value(new_client, FSCSCY_REG_IDENT_1) != 0x43)
goto ERROR1;
if (fscscy_read_value(new_client, FSCSCY_REG_IDENT_2) != 0x59)
goto ERROR1;
}
kind = fscscy;
type_name = "fscscy";
client_name = "fsc scylla chip";
/* Fill in the remaining client fields and put it into the global list */
strcpy(new_client->name, client_name);
new_client->id = fscscy_id++;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((i = i2c_register_entry(new_client, type_name,
fscscy_dir_table_template)) < 0) {
err = i;
goto ERROR4;
}
data->sysctl_id = i;
fscscy_init_client(new_client);
return 0;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
i2c_detach_client(new_client);
ERROR3:
ERROR1:
kfree(new_client);
ERROR0:
return err;
}
static int fscscy_detach_client(struct i2c_client *client)
{
int err;
i2c_deregister_entry(((struct fscscy_data *) (client->data))->
sysctl_id);
if ((err = i2c_detach_client(client))) {
printk
("fscscy.o: Client deregistration failed, client not detached.\n");
return err;
}
kfree(client);
return 0;
}
static int fscscy_read_value(struct i2c_client *client, u8 reg)
{
#ifdef DEBUG
printk("fscscy: read reg 0x%02x\n",reg);
#endif
return i2c_smbus_read_byte_data(client, reg);
}
static int fscscy_write_value(struct i2c_client *client, u8 reg, u8 value)
{
#ifdef DEBUG
printk("fscscy: write reg 0x%02x, val 0x%02x\n",reg, value);
#endif
return i2c_smbus_write_byte_data(client, reg, value);
}
/* Called when we have found a new FSCSCY. It should set limits, etc. */
static void fscscy_init_client(struct i2c_client *client)
{
struct fscscy_data *data = client->data;
/* read revision from chip */
data->revision = fscscy_read_value(client,FSCSCY_REG_REVISION);
/* Initialize min/max values from chip */
data->fan_min[0] = data->fan_max[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_ACT);
data->fan_min[1] = data->fan_max[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_ACT);
data->fan_min[2] = data->fan_max[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_ACT);
data->fan_min[3] = data->fan_max[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_ACT);
data->fan_min[4] = data->fan_max[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_ACT);
data->fan_min[4] = data->fan_max[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_ACT);
data->temp_min[0] = data->temp_max[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_ACT);
data->temp_min[1] = data->temp_max[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_ACT);
data->temp_min[2] = data->temp_max[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_ACT);
data->temp_min[3] = data->temp_max[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_ACT);
data->volt_min[0] = data->volt_max[0] = fscscy_read_value(client, FSCSCY_REG_VOLT_12);
data->volt_min[1] = data->volt_max[1] = fscscy_read_value(client, FSCSCY_REG_VOLT_5);
data->volt_min[2] = data->volt_max[2] = fscscy_read_value(client, FSCSCY_REG_VOLT_BATT);
}
static void fscscy_update_client(struct i2c_client *client)
{
struct fscscy_data *data = client->data;
down(&data->update_lock);
if ((jiffies - data->last_updated > 2 * HZ) ||
(jiffies < data->last_updated) || !data->valid) {
#ifdef DEBUG
printk("Starting fscscy update\n");
#endif
data->temp_act[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_ACT);
if (data->temp_min[0] > data->temp_act[0]) data->temp_min[0] = data->temp_act[0];
if (data->temp_max[0] < data->temp_act[0]) data->temp_max[0] = data->temp_act[0];
data->temp_act[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_ACT);
if (data->temp_min[1] > data->temp_act[1]) data->temp_min[1] = data->temp_act[1];
if (data->temp_max[1] < data->temp_act[1]) data->temp_max[1] = data->temp_act[1];
data->temp_act[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_ACT);
if (data->temp_min[2] > data->temp_act[2]) data->temp_min[2] = data->temp_act[2];
if (data->temp_max[2] < data->temp_act[2]) data->temp_max[2] = data->temp_act[2];
data->temp_act[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_ACT);
if (data->temp_min[3] > data->temp_act[3]) data->temp_min[3] = data->temp_act[3];
if (data->temp_max[3] < data->temp_act[3]) data->temp_max[3] = data->temp_act[3];
data->temp_status[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_STATE);
data->temp_status[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_STATE);
data->temp_status[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_STATE);
data->temp_status[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_STATE);
data->temp_lim[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_LIM);
data->temp_lim[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_LIM);
data->temp_lim[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_LIM);
data->temp_lim[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_LIM);
data->volt[0] = fscscy_read_value(client, FSCSCY_REG_VOLT_12);
if (data->volt_min[0] > data->volt[0]) data->volt_min[0] = data->volt[0];
if (data->volt_max[0] < data->volt[0]) data->volt_max[0] = data->volt[0];
data->volt[1] = fscscy_read_value(client, FSCSCY_REG_VOLT_5);
if (data->volt_min[1] > data->volt[1]) data->volt_min[1] = data->volt[1];
if (data->volt_max[1] < data->volt[1]) data->volt_max[1] = data->volt[1];
data->volt[2] = fscscy_read_value(client, FSCSCY_REG_VOLT_BATT);
if (data->volt_min[2] > data->volt[2]) data->volt_min[2] = data->volt[2];
if (data->volt_max[2] < data->volt[2]) data->volt_max[2] = data->volt[2];
data->fan_act[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_ACT);
if (data->fan_min[0] > data->fan_act[0]) data->fan_min[0] = data->fan_act[0];
if (data->fan_max[0] < data->fan_act[0]) data->fan_max[0] = data->fan_act[0];
data->fan_act[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_ACT);
if (data->fan_min[1] > data->fan_act[1]) data->fan_min[1] = data->fan_act[1];
if (data->fan_max[1] < data->fan_act[1]) data->fan_max[1] = data->fan_act[1];
data->fan_act[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_ACT);
if (data->fan_min[2] > data->fan_act[2]) data->fan_min[2] = data->fan_act[2];
if (data->fan_max[2] < data->fan_act[2]) data->fan_max[2] = data->fan_act[2];
data->fan_act[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_ACT);
if (data->fan_min[3] > data->fan_act[3]) data->fan_min[3] = data->fan_act[3];
if (data->fan_max[3] < data->fan_act[3]) data->fan_max[3] = data->fan_act[3];
data->fan_act[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_ACT);
if (data->fan_min[4] > data->fan_act[4]) data->fan_min[4] = data->fan_act[4];
if (data->fan_max[4] < data->fan_act[4]) data->fan_max[4] = data->fan_act[4];
data->fan_act[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_ACT);
if (data->fan_min[5] > data->fan_act[5]) data->fan_min[5] = data->fan_act[5];
if (data->fan_max[5] < data->fan_act[5]) data->fan_max[5] = data->fan_act[5];
data->fan_status[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_STATE);
data->fan_status[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_STATE);
data->fan_status[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_STATE);
data->fan_status[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_STATE);
data->fan_status[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_STATE);
data->fan_status[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_STATE);
data->fan_rpmmin[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_RPMMIN);
data->fan_rpmmin[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_RPMMIN);
data->fan_rpmmin[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_RPMMIN);
data->fan_rpmmin[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_RPMMIN);
data->fan_rpmmin[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_RPMMIN);
data->fan_rpmmin[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_RPMMIN);
data->fan_ripple[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_RIPPLE);
data->fan_ripple[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_RIPPLE);
data->fan_ripple[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_RIPPLE);
data->fan_ripple[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_RIPPLE);
data->fan_ripple[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_RIPPLE);
data->fan_ripple[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_RIPPLE);
data->watchdog[0] = fscscy_read_value(client, FSCSCY_REG_WDOG_PRESET);
data->watchdog[1] = fscscy_read_value(client, FSCSCY_REG_WDOG_STATE);
data->watchdog[2] = fscscy_read_value(client, FSCSCY_REG_WDOG_CONTROL);
data->global_event = fscscy_read_value(client, FSCSCY_REG_EVENT_STATE);
data->global_control = fscscy_read_value(client, FSCSCY_REG_CONTROL);
data->pciload = fscscy_read_value(client, FSCSCY_REG_PCILOAD);
data->intr_status = fscscy_read_value(client, FSCSCY_REG_INTR_STATE);
data->intr_control = fscscy_read_value(client, FSCSCY_REG_INTR_CTRL);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void fscscy_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
switch(ctl_name) {
case FSCSCY_SYSCTL_REV:
results[0] = data->revision ;
break;
case FSCSCY_SYSCTL_EVENT:
results[0] = data->global_event & 0x9f; /* MKN */
break;
case FSCSCY_SYSCTL_CONTROL:
results[0] = data->global_control & 0x19; /* MKN */
break;
default:
printk("fscscy: ctl_name %d not supported\n",
ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if((ctl_name == FSCSCY_SYSCTL_CONTROL) && (*nrels_mag >= 1)) {
data->global_control = (data->global_control & 0x18) | (results[0] & 0x01); /* MKN */
printk("fscscy: writing 0x%02x to global_control\n",
data->global_control);
fscscy_write_value(client,FSCSCY_REG_CONTROL,
data->global_control);
}
else
printk("fscscy: writing to chip not supported\n");
}
}
#define TEMP_FROM_REG(val) (val-128)
void fscscy_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
switch(ctl_name) {
case FSCSCY_SYSCTL_TEMP0:
results[0] = data->temp_status[0] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[0]);
results[2] = TEMP_FROM_REG(data->temp_lim[0]);
results[3] = TEMP_FROM_REG(data->temp_min[0]);
results[4] = TEMP_FROM_REG(data->temp_max[0]);
break;
case FSCSCY_SYSCTL_TEMP1:
results[0] = data->temp_status[1] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[1]);
results[2] = TEMP_FROM_REG(data->temp_lim[1]);
results[3] = TEMP_FROM_REG(data->temp_min[1]);
results[4] = TEMP_FROM_REG(data->temp_max[1]);
break;
case FSCSCY_SYSCTL_TEMP2:
results[0] = data->temp_status[2] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[2]);
results[2] = TEMP_FROM_REG(data->temp_lim[2]);
results[3] = TEMP_FROM_REG(data->temp_min[2]);
results[4] = TEMP_FROM_REG(data->temp_max[2]);
break;
case FSCSCY_SYSCTL_TEMP3:
results[0] = data->temp_status[3] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[3]);
results[2] = TEMP_FROM_REG(data->temp_lim[3]);
results[3] = TEMP_FROM_REG(data->temp_min[3]);
results[4] = TEMP_FROM_REG(data->temp_max[3]);
break;
default:
printk("fscscy: ctl_name %d not supported\n",
ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 5;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if(*nrels_mag >= 1) {
switch(ctl_name) {
case FSCSCY_SYSCTL_TEMP0:
data->temp_status[0] =
(data->temp_status[0] & ~0x02)
| (results[0] & 0x02);
printk("fscscy: writing value 0x%02x "
"to temp0_status\n",
data->temp_status[0]);
fscscy_write_value(client,
FSCSCY_REG_TEMP0_STATE,
data->temp_status[0] & 0x02);
break;
case FSCSCY_SYSCTL_TEMP1:
data->temp_status[1] = (data->temp_status[1] & ~0x02) | (results[0] & 0x02);
printk("fscscy: writing value 0x%02x to temp1_status\n", data->temp_status[1]);
fscscy_write_value(client,FSCSCY_REG_TEMP1_STATE,
data->temp_status[1] & 0x02);
break;
case FSCSCY_SYSCTL_TEMP2:
data->temp_status[2] = (data->temp_status[2] & ~0x02) | (results[0] & 0x02);
printk("fscscy: writing value 0x%02x to temp2_status\n", data->temp_status[2]);
fscscy_write_value(client,FSCSCY_REG_TEMP2_STATE,
data->temp_status[2] & 0x02);
break;
case FSCSCY_SYSCTL_TEMP3:
data->temp_status[3] = (data->temp_status[3] & ~0x02) | (results[0] & 0x02);
printk("fscscy: writing value 0x%02x to temp3_status\n", data->temp_status[3]);
fscscy_write_value(client,FSCSCY_REG_TEMP3_STATE,
data->temp_status[3] & 0x02);
break;
default:
printk("fscscy: ctl_name %d not supported\n",ctl_name);
}
}
else
printk("fscscy: writing to chip not supported\n");
}
}
#define VOLT_FROM_REG(val,mult) (val*mult/255)
void fscscy_volt(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
switch(ctl_name) {
case FSCSCY_SYSCTL_VOLT0:
results[0] = VOLT_FROM_REG(data->volt[0],1420);
results[1] = VOLT_FROM_REG(data->volt_min[0],1420);
results[2] = VOLT_FROM_REG(data->volt_max[0],1420);
break;
case FSCSCY_SYSCTL_VOLT1:
results[0] = VOLT_FROM_REG(data->volt[1],660);
results[1] = VOLT_FROM_REG(data->volt_min[1],660);
results[2] = VOLT_FROM_REG(data->volt_max[1],660);
break;
case FSCSCY_SYSCTL_VOLT2:
results[0] = VOLT_FROM_REG(data->volt[2],330);
results[1] = VOLT_FROM_REG(data->volt_min[2],330);
results[2] = VOLT_FROM_REG(data->volt_max[2],330);
break;
default:
printk("fscscy: ctl_name %d not supported\n",
ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
printk("fscscy: writing to chip not supported\n");
}
}
void fscscy_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
switch(ctl_name) {
case FSCSCY_SYSCTL_FAN0:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
0,FSCSCY_REG_FAN0_STATE,FSCSCY_REG_FAN0_RPMMIN,
FSCSCY_REG_FAN0_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN1:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
1,FSCSCY_REG_FAN1_STATE,FSCSCY_REG_FAN1_RPMMIN,
FSCSCY_REG_FAN1_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN2:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
2,FSCSCY_REG_FAN2_STATE,FSCSCY_REG_FAN2_RPMMIN,
FSCSCY_REG_FAN2_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN3:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
3,FSCSCY_REG_FAN3_STATE,FSCSCY_REG_FAN3_RPMMIN,
FSCSCY_REG_FAN3_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN4:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
4,FSCSCY_REG_FAN4_STATE,FSCSCY_REG_FAN4_RPMMIN,
FSCSCY_REG_FAN4_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN5:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
5,FSCSCY_REG_FAN5_STATE,FSCSCY_REG_FAN5_RPMMIN,
FSCSCY_REG_FAN5_RIPPLE);
break;
default:
printk("fscscy: illegal fan nr %d\n",ctl_name);
}
}
#define RPM_FROM_REG(val) (val*60)
void fscscy_fan_internal(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results, int nr,
int reg_state, int reg_min, int reg_ripple )
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->fan_status[nr] & 0x0f; /* MKN */
results[1] = data->fan_rpmmin[nr];
results[2] = data->fan_ripple[nr] & 0x03;
results[3] = RPM_FROM_REG(data->fan_act[nr]);
results[4] = RPM_FROM_REG(data->fan_min[nr]);
results[5] = RPM_FROM_REG(data->fan_max[nr]);
*nrels_mag = 6;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if(*nrels_mag >= 1) {
data->fan_status[nr] = (data->fan_status[nr] & 0x0b) | (results[0] & 0x04); /* MKN */
printk("fscscy: writing value 0x%02x to fan%d_status\n",
data->fan_status[nr],nr);
fscscy_write_value(client,reg_state,
data->fan_status[nr]);
}
if(*nrels_mag >= 2) {
if((results[1] & 0xff) == 0) {
printk("fscscy: fan%d rpmmin 0 not allowed for safety reasons\n",nr);
return;
}
data->fan_rpmmin[nr] = results[1];
printk("fscscy: writing value 0x%02x to fan%d_min\n",
data->fan_rpmmin[nr],nr);
fscscy_write_value(client,reg_min,
data->fan_rpmmin[nr]);
}
if(*nrels_mag >= 3) {
if((results[2] & 0x03) == 0) {
printk("fscscy: fan%d ripple 0 is nonsense/not allowed\n",nr);
return;
}
data->fan_ripple[nr] = results[2] & 0x03;
printk("fscscy: writing value 0x%02x to fan%d_ripple\n",
data->fan_ripple[nr],nr);
fscscy_write_value(client,reg_ripple,
data->fan_ripple[nr]);
}
}
}
void fscscy_wdog(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->watchdog[0] ;
results[1] = data->watchdog[1] & 0x02;
results[2] = data->watchdog[2] & 0xb0;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->watchdog[0] = results[0] & 0xff;
printk("fscscy: writing value 0x%02x to wdog_preset\n",
data->watchdog[0]);
fscscy_write_value(client,FSCSCY_REG_WDOG_PRESET,
data->watchdog[0]);
}
if (*nrels_mag >= 2) {
data->watchdog[1] = results[1] & 0x02;
printk("fscscy: writing value 0x%02x to wdog_state\n",
data->watchdog[1]);
fscscy_write_value(client,FSCSCY_REG_WDOG_STATE,
data->watchdog[1]);
}
if (*nrels_mag >= 3) {
data->watchdog[2] = results[2] & 0xb0;
printk("fscscy: writing value 0x%02x to wdog_control\n",
data->watchdog[2]);
fscscy_write_value(client,FSCSCY_REG_WDOG_CONTROL,
data->watchdog[2]);
}
}
}
void fscscy_pciload(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->pciload;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
printk("fscscy: writing PCILOAD to chip not supported\n");
}
}
void fscscy_intrusion(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->intr_control & 0x80;
results[1] = data->intr_status & 0xc0;
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->intr_control = results[0] & 0x80;
printk("fscscy: writing value 0x%02x to intr_control\n",
data->intr_control);
fscscy_write_value(client,FSCSCY_REG_INTR_CTRL,
data->intr_control);
}
}
}
static int __init sm_fscscy_init(void)
{
printk("fscscy.o version %s (%s)\n", LM_VERSION, LM_DATE);
return i2c_add_driver(&fscscy_driver);
}
static void __exit sm_fscscy_exit(void)
{
i2c_del_driver(&fscscy_driver);
}
MODULE_AUTHOR
("Martin Knoblauch <mkn@teraport.de> based on work (fscpos) from Hermann Jung <hej@odn.de>");
MODULE_DESCRIPTION("fujitsu siemens scylla chip driver");
module_init(sm_fscscy_init);
module_exit(sm_fscscy_exit);
Reference in new issue View Git Blame Copy Permalink