lm-sensors/kernel/chips/ltc1710.c

/*
    ltc1710.c - Part of lm_sensors, Linux kernel modules for hardware
             monitoring
    Copyright (c) 1999  Frodo Looijaard <frodol@dds.nl> and
    Philip Edelbrock <phil@netroedge.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

/* A few notes about the LTC1710:

* The LTC1710 is a dual programmable switch.  It can be used to turn
  anything on or off anything which consumes less than 300mA of 
  current and up to 5.5V
  
* The LTC1710 is a very, very simple SMBus device with three possible 
   SMBus addresses (0x58,0x59, or 0x5A).  Only SMBus byte writes
   (command writes) are supported.

* Since only writes are supported, READS DON'T WORK!  The device 
  plays dead in the event of a read, so this makes detection a 
  bit tricky.
  
* BTW- I can safely say that this driver has been tested under
  every possible case, so there should be no bugs. :')
  
  --Phil

*/


#include <linux/module.h>
#include <linux/malloc.h>
#include <linux/i2c.h>
#include "sensors.h"
#include "i2c-isa.h"
#include "version.h"
#include "compat.h"

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,53)
#include <linux/init.h>
#else
#define __init
#define __initdata
#endif


/* Addresses to scan */
static unsigned short normal_i2c[] = {SENSORS_I2C_END};
static unsigned short normal_i2c_range[] = {0x58,0x5a,SENSORS_I2C_END};
static unsigned int normal_isa[] = {SENSORS_ISA_END};
static unsigned int normal_isa_range[] = {SENSORS_ISA_END};

/* Insmod parameters */
SENSORS_INSMOD_1(ltc1710);

/* The LTC1710 registers */

/* (No registers.  [Wow! This thing is SIMPLE!] ) */

/* Initial values */
#define LTC1710_INIT 0 /* Both off */

/* Each client has this additional data */
struct ltc1710_data {
         int sysctl_id;

         struct semaphore update_lock;
         char valid;                 /* !=0 if following fields are valid */
         unsigned long last_updated; /* In jiffies */

         u8 status; /* Register values */
};

#ifdef MODULE
extern int init_module(void);
extern int cleanup_module(void);
#endif /* MODULE */

#ifdef MODULE
static
#else
extern
#endif
       int __init sensors_ltc1710_init(void);
static int __init ltc1710_cleanup(void);
static int ltc1710_attach_adapter(struct i2c_adapter *adapter);
static int ltc1710_detect(struct i2c_adapter *adapter, int address, int kind);
static int ltc1710_detach_client(struct i2c_client *client);
static int ltc1710_command(struct i2c_client *client, unsigned int cmd,
                        void *arg);
static void ltc1710_inc_use (struct i2c_client *client);
static void ltc1710_dec_use (struct i2c_client *client);
static void ltc1710_switch1(struct i2c_client *client, int operation, int ctl_name,
                      int *nrels_mag, long *results);
static void ltc1710_switch2(struct i2c_client *client, int operation, int ctl_name,
                      int *nrels_mag, long *results);
static void ltc1710_update_client(struct i2c_client *client);


/* This is the driver that will be inserted */
static struct i2c_driver ltc1710_driver = {
  /* name */            "LTC1710 sensor chip driver",
  /* id */              I2C_DRIVERID_LTC1710,
  /* flags */           I2C_DF_NOTIFY,
  /* attach_adapter */  &ltc1710_attach_adapter,
  /* detach_client */   &ltc1710_detach_client,
  /* command */         &ltc1710_command,
  /* inc_use */         &ltc1710_inc_use,
  /* dec_use */         &ltc1710_dec_use
};

/* These files are created for each detected LTC1710. This is just a template;
   though at first sight, you might think we could use a statically
   allocated list, we need some way to get back to the parent - which
   is done through one of the 'extra' fields which are initialized
   when a new copy is allocated. */
static ctl_table ltc1710_dir_table_template[] = {
  { LTC1710_SYSCTL_SWITCH_1, "switch1", NULL, 0, 0644, NULL, &sensors_proc_real,
    &sensors_sysctl_real, NULL, &ltc1710_switch1 },
  { LTC1710_SYSCTL_SWITCH_2, "switch2", NULL, 0, 0644, NULL, &sensors_proc_real,
    &sensors_sysctl_real, NULL, &ltc1710_switch2 },
  { 0 }
};

/* Used by init/cleanup */
static int __initdata ltc1710_initialized = 0;

/* I choose here for semi-static LTC1710 allocation. Complete dynamic
   allocation could also be used; the code needed for this would probably
   take more memory than the datastructure takes now. */
static int ltc1710_id = 0;

int ltc1710_attach_adapter(struct i2c_adapter *adapter)
{
  return sensors_detect(adapter,&addr_data,ltc1710_detect);
}

/* This function is called by sensors_detect */
int ltc1710_detect(struct i2c_adapter *adapter, int address, int kind)
{
  int i;
  struct i2c_client *new_client;
  struct ltc1710_data *data;
  int err=0;
  const char *type_name,*client_name;

  /* Make sure we aren't probing the ISA bus!! This is just a safety check
     at this moment; sensors_detect really won't call us. */
#ifdef DEBUG
  if (i2c_is_isa_adapter(adapter)) {
    printk("ltc1710.o: ltc1710_detect called for an ISA bus adapter?!?\n");
    return 0;
  }
#endif

  /* Here, we have to do the address registration check for the I2C bus.
     But that is not yet implemented. */

  /* OK. For now, we presume we have a valid client. We now create the
     client structure, even though we cannot fill it completely yet.
     But it allows us to access ltc1710_{read,write}_value. */
  if (! (new_client = kmalloc(sizeof(struct i2c_client) +
                              sizeof(struct ltc1710_data),
                              GFP_KERNEL))) {
    err = -ENOMEM;
    goto ERROR0;
  }

  data = (struct ltc1710_data *) (new_client + 1);
  new_client->addr = address;
  new_client->data = data;
  new_client->adapter = adapter;
  new_client->driver = &ltc1710_driver;

  /* Now, we would do the remaining detection. But the LTC1710 is plainly
     impossible to detect! Stupid chip. */

  /* Determine the chip type - only one kind supported! */
  if (kind <= 0)
    kind = ltc1710;

  if (kind == ltc1710) {
    type_name = "ltc1710";
    client_name = "LTC1710 chip";
  } else {
#ifdef DEBUG
    printk("ltc1710.o: Internal error: unknown kind (%d)?!?",kind);
#endif
    goto ERROR1;
  }

  /* Fill in the remaining client fields and put it into the global list */
  strcpy(new_client->name,client_name);

  new_client->id = ltc1710_id++;
  data->valid = 0;
  init_MUTEX(&data->update_lock);

  /* Tell the I2C layer a new client has arrived */
  if ((err = i2c_attach_client(new_client)))
    goto ERROR3;

  /* Register a new directory entry with module sensors */
  if ((i = sensors_register_entry(new_client,type_name,
                                  ltc1710_dir_table_template)) < 0) {
    err = i;
    goto ERROR4;
  }
  data->sysctl_id = i;

  return 0;

/* OK, this is not exactly good programming practice, usually. But it is
   very code-efficient in this case. */

ERROR4:
  i2c_detach_client(new_client);
ERROR3:
ERROR1:
  kfree(new_client);
ERROR0:
  return err;
}


int ltc1710_detach_client(struct i2c_client *client)
{
  int err;

  sensors_deregister_entry(((struct ltc1710_data *)(client->data))->sysctl_id);

  if ((err = i2c_detach_client(client))) {
    printk("ltc1710.o: Client deregistration failed, client not detached.\n");
    return err;
  }

  kfree(client);

  return 0;

}

/* No commands defined yet */
int ltc1710_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
  return 0;
}

/* Nothing here yet */
void ltc1710_inc_use (struct i2c_client *client)
{
#ifdef MODULE
  MOD_INC_USE_COUNT;
#endif
}

/* Nothing here yet */
void ltc1710_dec_use (struct i2c_client *client)
{
#ifdef MODULE
  MOD_DEC_USE_COUNT;
#endif
}


void ltc1710_update_client(struct i2c_client *client)
{
  struct ltc1710_data *data = client->data;

  down(&data->update_lock);

  if ((jiffies - data->last_updated > HZ+HZ/2 ) ||
      (jiffies < data->last_updated) || ! data->valid) {

#ifdef DEBUG
    printk("Starting ltc1710 update\n");
#endif

    /* data->status = i2c_smbus_read_byte(client->adapter,client->addr); 
    	Unfortunately, reads always fail!  */
    data->last_updated = jiffies;
    data->valid = 1;
  }

  up(&data->update_lock);
}


void ltc1710_switch1(struct i2c_client *client, int operation, int ctl_name,
               int *nrels_mag, long *results)
{
  struct ltc1710_data *data = client->data;
  if (operation == SENSORS_PROC_REAL_INFO)
    *nrels_mag = 0;
  else if (operation == SENSORS_PROC_REAL_READ) {
    ltc1710_update_client(client);
    results[0] = data->status & 1;
    *nrels_mag = 1;
  } else if (operation == SENSORS_PROC_REAL_WRITE) {
    if (*nrels_mag >= 1) {
      data->status = (data->status & 2) | results[0];
      i2c_smbus_write_byte(client->adapter,client->addr,data->status);
    }
  }
}

void ltc1710_switch2(struct i2c_client *client, int operation, int ctl_name,
               int *nrels_mag, long *results)
{
  struct ltc1710_data *data = client->data;
  if (operation == SENSORS_PROC_REAL_INFO)
    *nrels_mag = 0;
  else if (operation == SENSORS_PROC_REAL_READ) {
    ltc1710_update_client(client);
    results[0] = (data->status & 2) >> 1;
    *nrels_mag = 1;
  } else if (operation == SENSORS_PROC_REAL_WRITE) {
    if (*nrels_mag >= 1) {
      data->status = (data->status & 1) | (results[0] << 1);
      i2c_smbus_write_byte(client->adapter,client->addr,data->status);
    }
  }
}

int __init sensors_ltc1710_init(void)
{
  int res;

  printk("ltc1710.o version %s (%s)\n",LM_VERSION,LM_DATE);
  ltc1710_initialized = 0;
  if ((res = i2c_add_driver(&ltc1710_driver))) {
    printk("ltc1710.o: Driver registration failed, module not inserted.\n");
    ltc1710_cleanup();
    return res;
  }
  ltc1710_initialized ++;
  return 0;
}

int __init ltc1710_cleanup(void)
{
  int res;

  if (ltc1710_initialized >= 1) {
    if ((res = i2c_del_driver(&ltc1710_driver))) {
      printk("ltc1710.o: Driver deregistration failed, module not removed.\n");
      return res;
    }
    ltc1710_initialized --;
  }

  return 0;
}

EXPORT_NO_SYMBOLS;

#ifdef MODULE

MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("LTC1710 driver");

int init_module(void)
{
  return sensors_ltc1710_init();
}

int cleanup_module(void)
{
  return ltc1710_cleanup();
}

#endif /* MODULE */