mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-31 13:10:30 +00:00
Kyosti Malkki
1cfe63804a
Copy sysctl enums to chip drivers from sensors.h for now, as seen in drivers included in 2.5 tree. File no longer included from kernel side. Apply i2c-proc change in CVS tagged -km2. Partial clean and sort of includes everywhere. Add i2c-dev.h, as a partial copy from i2c. Add to sensors.h from i2c-proc.h to compile things. Remove i2c-isa.h. Reflect header file changes to lib/ and prog/. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1705 7894878c-1315-0410-8ee3-d5d059ff63e0
272 lines
6.3 KiB
C
272 lines
6.3 KiB
C
/*
|
|
voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
monitoring
|
|
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
|
|
Philip Edelbrock <phil@netroedge.com>,
|
|
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
|
|
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
|
Simon Vogl
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/* This interfaces to the I2C bus of the Voodoo3 to gain access to
|
|
the BT869 and possibly other I2C devices. */
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
#include "version.h"
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* 3DFX defines */
|
|
#ifndef PCI_DEVICE_ID_3DFX_VOODOO3
|
|
#define PCI_DEVICE_ID_3DFX_VOODOO3 0x05
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_3DFX_BANSHEE
|
|
#define PCI_DEVICE_ID_3DFX_BANSHEE 0x03
|
|
#endif
|
|
|
|
/* the only registers we use */
|
|
#define REG 0x78
|
|
#define REG2 0x70
|
|
|
|
/* bit locations in the register */
|
|
#define DDC_ENAB 0x00040000
|
|
#define DDC_SCL_OUT 0x00080000
|
|
#define DDC_SDA_OUT 0x00100000
|
|
#define DDC_SCL_IN 0x00200000
|
|
#define DDC_SDA_IN 0x00400000
|
|
#define I2C_ENAB 0x00800000
|
|
#define I2C_SCL_OUT 0x01000000
|
|
#define I2C_SDA_OUT 0x02000000
|
|
#define I2C_SCL_IN 0x04000000
|
|
#define I2C_SDA_IN 0x08000000
|
|
|
|
/* initialization states */
|
|
#define INIT2 0x2
|
|
#define INIT3 0x4
|
|
|
|
/* delays */
|
|
#define CYCLE_DELAY 10
|
|
#define TIMEOUT (HZ / 2)
|
|
|
|
|
|
static void config_v3(struct pci_dev *dev);
|
|
|
|
|
|
static unsigned char *mem;
|
|
|
|
static inline void outlong(unsigned int dat)
|
|
{
|
|
*((unsigned int *) (mem + REG)) = dat;
|
|
}
|
|
|
|
static inline unsigned int readlong(void)
|
|
{
|
|
return *((unsigned int *) (mem + REG));
|
|
}
|
|
|
|
/* The voo GPIO registers don't have individual masks for each bit
|
|
so we always have to read before writing. */
|
|
|
|
static void bit_vooi2c_setscl(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readlong();
|
|
if(val)
|
|
r |= I2C_SCL_OUT;
|
|
else
|
|
r &= ~I2C_SCL_OUT;
|
|
outlong(r);
|
|
readlong(); /* flush posted write */
|
|
}
|
|
|
|
static void bit_vooi2c_setsda(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readlong();
|
|
if(val)
|
|
r |= I2C_SDA_OUT;
|
|
else
|
|
r &= ~I2C_SDA_OUT;
|
|
outlong(r);
|
|
readlong(); /* flush posted write */
|
|
}
|
|
|
|
/* The GPIO pins are open drain, so the pins always remain outputs.
|
|
We rely on the i2c-algo-bit routines to set the pins high before
|
|
reading the input from other chips. */
|
|
|
|
static int bit_vooi2c_getscl(void *data)
|
|
{
|
|
return (0 != (readlong() & I2C_SCL_IN));
|
|
}
|
|
|
|
static int bit_vooi2c_getsda(void *data)
|
|
{
|
|
return (0 != (readlong() & I2C_SDA_IN));
|
|
}
|
|
|
|
static void bit_vooddc_setscl(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readlong();
|
|
if(val)
|
|
r |= DDC_SCL_OUT;
|
|
else
|
|
r &= ~DDC_SCL_OUT;
|
|
outlong(r);
|
|
readlong(); /* flush posted write */
|
|
}
|
|
|
|
static void bit_vooddc_setsda(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readlong();
|
|
if(val)
|
|
r |= DDC_SDA_OUT;
|
|
else
|
|
r &= ~DDC_SDA_OUT;
|
|
outlong(r);
|
|
readlong(); /* flush posted write */
|
|
}
|
|
|
|
static int bit_vooddc_getscl(void *data)
|
|
{
|
|
return (0 != (readlong() & DDC_SCL_IN));
|
|
}
|
|
|
|
static int bit_vooddc_getsda(void *data)
|
|
{
|
|
return (0 != (readlong() & DDC_SDA_IN));
|
|
}
|
|
|
|
|
|
/* Configures the chip */
|
|
|
|
void config_v3(struct pci_dev *dev)
|
|
{
|
|
unsigned int cadr;
|
|
|
|
/* map Voodoo3 memory */
|
|
cadr = dev->resource[0].start;
|
|
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
mem = ioremap_nocache(cadr, 0x1000);
|
|
if(mem) {
|
|
*((unsigned int *) (mem + REG2)) = 0x8160;
|
|
*((unsigned int *) (mem + REG)) = 0xcffc0020;
|
|
printk("i2c-voodoo3: Using Banshee/Voodoo3 at 0x%p\n", mem);
|
|
}
|
|
}
|
|
|
|
static struct i2c_algo_bit_data voo_i2c_bit_data = {
|
|
.setsda = bit_vooi2c_setsda,
|
|
.setscl = bit_vooi2c_setscl,
|
|
.getsda = bit_vooi2c_getsda,
|
|
.getscl = bit_vooi2c_getscl,
|
|
.udelay = CYCLE_DELAY,
|
|
.mdelay = CYCLE_DELAY,
|
|
.timeout = TIMEOUT
|
|
};
|
|
|
|
static struct i2c_adapter voodoo3_i2c_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.name = "I2C Voodoo3/Banshee adapter",
|
|
.id = I2C_HW_B_VOO,
|
|
.algo_data = &voo_i2c_bit_data,
|
|
};
|
|
|
|
static struct i2c_algo_bit_data voo_ddc_bit_data = {
|
|
.setsda = bit_vooddc_setsda,
|
|
.setscl = bit_vooddc_setscl,
|
|
.getsda = bit_vooddc_getsda,
|
|
.getscl = bit_vooddc_getscl,
|
|
.udelay = CYCLE_DELAY,
|
|
.mdelay = CYCLE_DELAY,
|
|
.timeout = TIMEOUT
|
|
};
|
|
|
|
static struct i2c_adapter voodoo3_ddc_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.name = "DDC Voodoo3/Banshee adapter",
|
|
.id = I2C_HW_B_VOO,
|
|
.algo_data = &voo_ddc_bit_data,
|
|
};
|
|
|
|
|
|
#if 0
|
|
PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3,
|
|
PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE,
|
|
#endif
|
|
static struct pci_device_id voodoo3_ids[] __devinitdata = {
|
|
{ 0, }
|
|
};
|
|
|
|
static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
|
|
if (voodoo3_setup()) {
|
|
printk
|
|
("i2c-voodoo3.o: Voodoo3 not detected, module not inserted.\n");
|
|
return -ENODEV;
|
|
}
|
|
config_v3(dev);
|
|
|
|
i2c_bit_add_bus(&voodoo3_i2c_adapter);
|
|
i2c_bit_add_bus(&voodoo3_ddc_adapter);
|
|
}
|
|
|
|
static void __devexit voodoo3_remove(struct pci_dev *dev)
|
|
{
|
|
i2c_bit_del_bus(&voodoo3_i2c_adapter);
|
|
i2c_bit_del_bus(&voodoo3_ddc_adapter);
|
|
}
|
|
|
|
|
|
static struct pci_driver voodoo3_driver = {
|
|
.name = "voodoo3 smbus",
|
|
.id_table = voodoo3_ids,
|
|
.probe = voodoo3_probe,
|
|
.remove = __devexit_p(voodoo3_remove),
|
|
};
|
|
|
|
static int __init i2c_voodoo3_init(void)
|
|
{
|
|
printk("i2c-voodoo3.o version %s (%s)\n", LM_VERSION, LM_DATE);
|
|
return pci_module_init(&voodoo3_driver);
|
|
}
|
|
|
|
|
|
static void __exit i2c_voodoo3_exit(void)
|
|
{
|
|
pci_unregister_driver(&voodoo3_driver);
|
|
iounmap(mem);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR
|
|
("Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Ralph Metzler <rjkm@thp.uni-koeln.de>, and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
|
MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
|
|
|
|
module_init(i2c_voodoo3_init);
|
|
module_exit(i2c_voodoo3_exit);
|