Add MSP432 lib and example

PUBLISHED_FROM=57ff02457269938feae805f2972b96b15931d41a

examples/MSP432/ccs/MG_hello/Board.h

@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2015, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * *  Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * *  Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * *  Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __BOARD_H
+#define __BOARD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "MSP_EXP432P401R.h"
+
+#define Board_initGeneral           MSP_EXP432P401R_initGeneral
+#define Board_initGPIO              MSP_EXP432P401R_initGPIO
+#define Board_initI2C               MSP_EXP432P401R_initI2C
+#define Board_initPWM               MSP_EXP432P401R_initPWM
+#define Board_initSDSPI             MSP_EXP432P401R_initSDSPI
+#define Board_initSPI               MSP_EXP432P401R_initSPI
+#define Board_initUART              MSP_EXP432P401R_initUART
+#define Board_initWatchdog          MSP_EXP432P401R_initWatchdog
+#define Board_initWiFi              MSP_EXP432P401R_initWiFi
+
+#define Board_LED_ON                MSP_EXP432P401R_LED_ON
+#define Board_LED_OFF               MSP_EXP432P401R_LED_OFF
+
+#define Board_BUTTON0               MSP_EXP432P401R_S1
+#define Board_BUTTON1               MSP_EXP432P401R_S2
+#define Board_LED0                  MSP_EXP432P401R_LED1
+#define Board_LED1                  MSP_EXP432P401R_LED_RED
+#define Board_LED2                  MSP_EXP432P401R_LED_RED
+
+/*
+ * MSP_EXP432P401R_LED_GREEN & MSP_EXP432P401R_LED_BLUE are used for
+ * PWM examples.  Uncomment the following lines if you would like to control
+ * the LEDs with the GPIO driver.
+ */
+//#define Board_LED2                  MSP_EXP432P401R_LED_GREEN
+//#define Board_LED3                  MSP_EXP432P401R_LED_BLUE
+
+#define Board_I2C0                  MSP_EXP432P401R_I2CB0
+#define Board_I2C_TMP               MSP_EXP432P401R_I2CB0
+#define Board_I2C_NFC               MSP_EXP432P401R_I2CB0
+#define Board_I2C_TPL0401           MSP_EXP432P401R_I2CB0
+
+#define Board_PWM0                  MSP_EXP432P401R_PWM_TA1_1
+#define Board_PWM1                  MSP_EXP432P401R_PWM_TA1_2
+
+#define Board_SDSPI0                MSP_EXP432P401R_SDSPIB0
+
+#define Board_SPI0                  MSP_EXP432P401R_SPIB0
+#define Board_SPI1                  MSP_EXP432P401R_SPIB2
+
+#define Board_UART0                 MSP_EXP432P401R_UARTA0
+#define Board_UART1                 MSP_EXP432P401R_UARTA2
+
+#define Board_WATCHDOG0             MSP_EXP432P401R_WATCHDOG
+
+#define Board_WIFI                  MSP_EXP432P401R_WIFI
+#define Board_WIFI_SPI              MSP_EXP432P401R_SPIB0
+
+/* Board specific I2C addresses */
+#define Board_TMP006_ADDR           (0x40)
+#define Board_RF430CL330_ADDR       (0x28)
+#define Board_TPL0401_ADDR          (0x40)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __BOARD_H */