Add frdm-mcxw71 support

2026-11-12 16:50:21 +00:00 · 2026-10-20 21:48:34 +01:00
1 parent a6b6a0d779
commit 1ca4fd1fef
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2021-2024 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include "flash_config.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.flash_config"
+#endif
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+#if defined(BOOT_HEADER_ENABLE) && (BOOT_HEADER_ENABLE == 1)
+#if defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".flash_conf"), used))
+#elif defined(__ICCARM__)
+#pragma location = ".flash_conf"
+#endif
+const fc_flexspi_nor_config_t flexspi_config = {
+    .memConfig =
+        {
+            .tag                 = FC_BLOCK_TAG,
+            .version             = FC_BLOCK_VERSION,
+            .readSampleClkSrc    = 1,
+            .csHoldTime          = 3,
+            .csSetupTime         = 3,
+            .deviceModeCfgEnable = 1,
+            .deviceModeSeq       = {.seqNum = 1, .seqId = 2},
+            .deviceModeArg       = 0x02,
+            .configCmdEnable     = 0,
+            .deviceType          = 0x1,
+            .sflashPadType       = kSerialFlash_4Pads,
+            .serialClkFreq       = 5,
+            .sflashA1Size        = 0x4000000U,
+            .sflashA2Size        = 0,
+            .sflashB1Size        = 0,
+            .sflashB2Size        = 0,
+            .lookupTable =
+                {
+                    /* Read */
+                    [0] = FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0xEC, FC_RADDR_SDR, FC_FLEXSPI_4PAD, 0x20),
+                    [1] = FC_FLEXSPI_LUT_SEQ(FC_MODE8_SDR, FC_FLEXSPI_4PAD, 0xF0, FC_DUMMY_SDR, FC_FLEXSPI_4PAD, 0x04),
+                    [2] = FC_FLEXSPI_LUT_SEQ(FC_READ_SDR, FC_FLEXSPI_4PAD, 0x04, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+
+                    /* Read Status */
+                    [4 * 1 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x05, FC_READ_SDR, FC_FLEXSPI_1PAD, 0x04),
+
+                    /* Write Status */
+                    [4 * 2 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x31, FC_WRITE_SDR, FC_FLEXSPI_1PAD, 0x01),
+
+                    /* Write Enable */
+                    [4 * 3 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x06, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+
+                    /* Sector erase */
+                    [4 * 5 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x21, FC_RADDR_SDR, FC_FLEXSPI_1PAD, 0x20),
+
+                    /* Block erase */
+                    [4 * 8 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0xDC, FC_RADDR_SDR, FC_FLEXSPI_1PAD, 0x20),
+
+                    /* Page program */
+                    [4 * 9 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x34, FC_RADDR_SDR, FC_FLEXSPI_1PAD, 0x20),
+                    [4 * 9 + 1] =
+                        FC_FLEXSPI_LUT_SEQ(FC_WRITE_SDR, FC_FLEXSPI_4PAD, 0x00, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+
+                    /* chip erase */
+                    [4 * 11 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0xC7, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+                },
+        },
+    .pageSize           = 0x100,
+    .sectorSize         = 0x1000,
+    .ipcmdSerialClkFreq = 0,
+    .blockSize          = 0x10000,
+    .fcb_fill[0]        = 0xFFFFFFFF,
+};
+#endif /* BOOT_HEADER_ENABLE */