Add build option V7_NO_COMPILER

Which disables tokenizer, parser, AST, and compiler. On ESP8266, it
frees 21K of ROM.

PUBLISHED_FROM=ff4c53ace6b9056c595b9e12ef3453330d659775

docs/design-concept/event-handler.md

@@ -3,8 +3,8 @@ title: Event handler function
 ---
 
 Each connection has an event handler function associated with it. That function
-must be implemented by user. Event handler is the key element of the Mongoose
+must be implemented by the user. Event handler is the key element of the Mongoose
-application, since it defines application's behavior. This is how an event
+application, since it defines the application's behaviour. This is how an event
 handler function looks like:
 
 ```c
@@ -18,14 +18,14 @@ static void ev_handler(struct mg_connection *nc, int ev, void *ev_data) {
 
 - `struct mg_connection *nc`: Connection that has received an event.
 - `int ev`: Event number, defined in `mongoose.h`. For example, when data
-  arrives on inbound connection `ev` would be `MG_EV_RECV`.
+  arrives on an inbound connection, `ev` would be `MG_EV_RECV`.
 - `void *ev_data`: This pointer points to the event-specific data, and it has
-  different meaning for different events. For example, for `MG_EV_RECV` event,
+  a different meaning for different events. For example, for an `MG_EV_RECV` event,
   `ev_data` is an `int *` pointer, pointing to the number of bytes received
-  from the remote peer and saved into the receive IO buffer. Exact meaning of
+  from the remote peer and saved into the receive IO buffer. The exact meaning of
   `ev_data` is described for each event. Protocol-specific events usually have
   `ev_data` pointing to structures that hold protocol-specific information.
 
 NOTE: `struct mg_connection` has `void *user_data` which is a placeholder for
-an application-specific data. Mongoose does not use that pointer. Event handler
+application-specific data. Mongoose does not use that pointer. Event handler
 can store any kind of information there.

docs/design-concept/events.md

@@ -2,36 +2,36 @@
 title: Events
 ---
 
-Mongoose accepts incoming connections, reads and writes data, and calls
+Mongoose accepts incoming connections, reads and writes data and calls
-specified event handler for each connection when appropriate. Typical event
+specified event handlers for each connection when appropriate. A typical event
 sequence is this:
 
-- For outbound connection: `MG_EV_CONNECT` -> (`MG_EV_RECV`, `MG_EV_SEND`,
+- For an outbound connection: `MG_EV_CONNECT` -> (`MG_EV_RECV`, `MG_EV_SEND`,
   `MG_EV_POLL` ...) -> `MG_EV_CLOSE`
-- For inbound connection: `MG_EV_ACCEPT` ->  (`MG_EV_RECV`, `MG_EV_SEND`,
+- For an inbound connection: `MG_EV_ACCEPT` ->  (`MG_EV_RECV`, `MG_EV_SEND`,
   `MG_EV_POLL` ...) -> `MG_EV_CLOSE`
 
 
 Below is a list of core events triggered by Mongoose (note that each protocol
 triggers protocol-specific events in addition to the core ones):
 
-- `MG_EV_ACCEPT`: sent when new server connection is accepted by a listening
+- `MG_EV_ACCEPT`: sent when a new server connection is accepted by a listening
   connection. `void *ev_data` is `union socket_address` of the remote peer.
 
 - `MG_EV_CONNECT`: sent when a new outbound connection created by `mg_connect()`
   either failed or succeeded. `void *ev_data` is `int *success`.  If `success`
-  is 0, then connection has been established, otherwise it contains error code.
+  is 0, then the connection has been established, otherwise it contains an error code.
   See `mg_connect_opt()` function for code example.
 
 - `MG_EV_RECV`: New data is received and appended to the end of `recv_mbuf`.
   `void *ev_data` is `int *num_received_bytes`. Typically, event handler should
   check received data in `nc->recv_mbuf`, discard processed data by calling
   `mbuf_remove()`, set connection flags `nc->flags` if necessary (see `struct
-  mg_connection`), and write data the remote peer by output functions like
+  mg_connection`) and write data the remote peer by output functions like
   `mg_send()`.
 
-  **WARNING**: Mongoose uses `realloc()` to expand receive buffer.  It is
+  **WARNING**: Mongoose uses `realloc()` to expand the receive buffer. It is
-  user's responsibility to discard processed data from the beginning of receive
+  the user's responsibility to discard processed data from the beginning of the receive
   buffer, note the `mbuf_remove()` call in the example above.
 
 - `MG_EV_SEND`: Mongoose has written data to the remote peer and discarded
@@ -39,14 +39,14 @@ triggers protocol-specific events in addition to the core ones):
   *num_sent_bytes`.
 
   **NOTE**: Mongoose output functions only append data to the
-  `mg_connection::send_mbuf`, they do not do any socket writes.  An actual IO
+  `mg_connection::send_mbuf`. They do not do any socket writes. An actual IO
-  is done by `mg_mgr_poll()`. `MG_EV_SEND` event is just a notification about
+  is done by `mg_mgr_poll()`. An `MG_EV_SEND` event is just a notification about
   an IO has been done.
 
 - `MG_EV_POLL`: Sent to all connections on each invocation of `mg_mgr_poll()`.
-  This event could be used to do any housekeeping, for example check whether
+  This event could be used to do any housekeeping, for example check whether a
-  certain timeout has expired and close the connection, or send heartbeet
+  certain timeout has expired and closes the connection or send heartbeat
-  message, et cetera.
+  message, etc.
 
 - `MG_EV_TIMER`: Sent to the connection if `mg_set_timer()` was called.