mirror of
https://github.com/cesanta/mongoose.git
synced 2026-11-01 13:10:43 +00:00
Move mip/ -> src/tcpip/, rename mip_ -> mg_tcpip_
This commit is contained in:
cpq committed
1 parent
efc54375dd
commit
2c62e58dbd
64 files changed
+515
-516
No files matched your search
@@ -14,7 +14,7 @@ SOURCES = main.c syscalls.c cmsis_device_f4/Source/Templates/gcc/startup_stm32f4
|
||||
|
||||
# Mongoose-specific build flags and source code files
|
||||
# Build options reference: https://mongoose.ws/documentation/#build-options
|
||||
CFLAGS += -I../../.. -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_CUSTOM_MILLIS=1 -DMG_ENABLE_MIP=1 -DMG_ENABLE_PACKED_FS=1
|
||||
CFLAGS += -I../../.. -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_CUSTOM_MILLIS=1 -DMG_ENABLE_TCPIP=1 -DMG_ENABLE_PACKED_FS=1
|
||||
SOURCES += ../../../mongoose.c ../../device-dashboard/net.c ../../device-dashboard/packed_fs.c
|
||||
|
||||
# Build flashable .bin file
|
||||
|
||||
@@ -10,7 +10,7 @@ which implements the following:
|
||||
- MQTT communication with a remote MQTT server
|
||||
- No dependencies: no HAL, no CMSIS, no RTOS
|
||||
- Hand-written [mcu.h](mcu.h) header based on a [datasheet](https://www.st.com/resource/en/reference_manual/rm0090-stm32f405415-stm32f407417-stm32f427437-and-stm32f429439-advanced-armbased-32bit-mcus-stmicroelectronics.pdf)
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/mip_driver_stm32.c)
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/driver_stm32.c)
|
||||
- Blue LED blinky, based on SysTick interrupt
|
||||
- User button handler, turns off/on green LED, based on EXTI, interrupt-driven
|
||||
- HardFault handler that blinks red LED
|
||||
|
||||
@@ -38,7 +38,7 @@ void SystemInit(void) { // Called automatically by startup code
|
||||
|
||||
static void timer_fn(void *arg) {
|
||||
gpio_toggle(LED2); // Blink LED
|
||||
bool up = ((struct mip_if *) arg)->state == MIP_STATE_READY;
|
||||
bool up = ((struct mg_tcpip_if *) arg)->state == MIP_STATE_READY;
|
||||
MG_INFO(("Ethernet: %s", up ? "up" : "down")); // Show network status
|
||||
}
|
||||
|
||||
@@ -74,11 +74,11 @@ int main(void) {
|
||||
// Initialise Mongoose network stack
|
||||
// Specify MAC address, and IP/mask/GW in network byte order for static
|
||||
// IP configuration. If IP/mask/GW are unset, DHCP is going to be used
|
||||
struct mip_driver_stm32_data driver_data = {.mdc_cr = 4}; // driver_stm32.h
|
||||
struct mip_if mif = {.mac = {2, 0, 1, 2, 3, 5},
|
||||
.driver = &mip_driver_stm32,
|
||||
.driver_data = &driver_data};
|
||||
mip_init(&mgr, &mif);
|
||||
struct mg_tcpip_driver_stm32_data driver_data = {.mdc_cr = 4};
|
||||
struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5},
|
||||
.driver = &mg_tcpip_driver_stm32,
|
||||
.driver_data = &driver_data};
|
||||
mg_tcpip_init(&mgr, &mif);
|
||||
mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif);
|
||||
|
||||
MG_INFO(("Waiting until network is up..."));
|
||||
|
||||
@@ -4,7 +4,7 @@ This firmware uses MIP, an experimental TCP/IP stack of the Mongoose Network Lib
|
||||
It implements the following:
|
||||
|
||||
- Minimal elementary web server, as simple as possible
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/mip_driver_stm32.c)
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/driver_stm32.c)
|
||||
- Basic HAL header [mcu.h](mcu.h) based on CMSIS
|
||||
- Blue LED blinky, based on another FreeRTOS task
|
||||
- Debug log on UART3 (st-link)
|
||||
|
||||
@@ -48,14 +48,13 @@ static void server(void *args) {
|
||||
// IP configuration. If IP/mask/GW are unset, DHCP is going to be used
|
||||
MG_INFO(("Initializing Ethernet driver"));
|
||||
ethernet_init();
|
||||
struct mip_driver_stm32_data driver_data = {.mdc_cr =
|
||||
4}; // See driver_stm32.h
|
||||
struct mip_if mif = {
|
||||
struct mg_tcpip_driver_stm32_data driver_data = {.mdc_cr = 4};
|
||||
struct mg_tcpip_if mif = {
|
||||
.mac = {2, 0, 1, 2, 3, 5},
|
||||
.driver = &mip_driver_stm32,
|
||||
.driver = &mg_tcpip_driver_stm32,
|
||||
.driver_data = &driver_data,
|
||||
};
|
||||
mip_init(&mgr, &mif);
|
||||
mg_tcpip_init(&mgr, &mif);
|
||||
|
||||
MG_INFO(("Starting Mongoose v%s", MG_VERSION)); // Tell the world
|
||||
mg_http_listen(&mgr, "http://0.0.0.0", fn, &mgr); // Web listener
|
||||
|
||||
@@ -3,5 +3,5 @@
|
||||
#include <errno.h>
|
||||
|
||||
#define MG_ARCH MG_ARCH_FREERTOS
|
||||
#define MG_ENABLE_MIP 1
|
||||
#define MG_ENABLE_TCPIP 1
|
||||
#define MG_IO_SIZE 256
|
||||
@@ -18,7 +18,7 @@ SOURCES += tinyusb/src/tusb.c \
|
||||
tinyusb/lib/networking/rndis_reports.c \
|
||||
usb_descriptors.c
|
||||
CFLAGS += -Itinyusb/src -Itinyusb/lib/networking
|
||||
CFLAGS += -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_MIP=1 -DMG_ENABLE_PACKED_FS=1 -DMG_IO_SIZE=512 -DMG_ENABLE_CUSTOM_MILLIS=1
|
||||
CFLAGS += -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_TCPIP=1 -DMG_ENABLE_PACKED_FS=1 -DMG_IO_SIZE=512 -DMG_ENABLE_CUSTOM_MILLIS=1
|
||||
CFLAGS += -DSTM32F429xx
|
||||
CFLAGS += -Wno-conversion -Wno-sign-conversion
|
||||
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
|
||||
#define LED PIN('B', 7) // On-board LED pin (blue)
|
||||
static uint64_t s_ticks;
|
||||
static struct mip_if *s_ifp;
|
||||
static struct mg_tcpip_if *s_ifp;
|
||||
uint32_t SystemCoreClock = SYS_FREQUENCY;
|
||||
const uint8_t tud_network_mac_address[6] = {2, 2, 0x84, 0x6A, 0x96, 0};
|
||||
|
||||
@@ -25,7 +25,7 @@ void SysTick_Handler(void) { // SyStick IRQ handler, triggered every 1ms
|
||||
}
|
||||
|
||||
bool tud_network_recv_cb(const uint8_t *buf, uint16_t len) {
|
||||
mip_qwrite((void *) buf, len, s_ifp);
|
||||
mg_tcpip_qwrite((void *) buf, len, s_ifp);
|
||||
// MG_INFO(("RECV %hu", len));
|
||||
// mg_hexdump(buf, len);
|
||||
tud_network_recv_renew();
|
||||
@@ -45,7 +45,7 @@ uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg) {
|
||||
return arg;
|
||||
}
|
||||
|
||||
static size_t usb_tx(const void *buf, size_t len, struct mip_if *ifp) {
|
||||
static size_t usb_tx(const void *buf, size_t len, struct mg_tcpip_if *ifp) {
|
||||
if (!tud_ready()) return 0;
|
||||
while (!tud_network_can_xmit(len)) tud_task();
|
||||
tud_network_xmit((void *) buf, len);
|
||||
@@ -53,7 +53,7 @@ static size_t usb_tx(const void *buf, size_t len, struct mip_if *ifp) {
|
||||
return len;
|
||||
}
|
||||
|
||||
static bool usb_up(struct mip_if *ifp) {
|
||||
static bool usb_up(struct mg_tcpip_if *ifp) {
|
||||
(void) ifp;
|
||||
return tud_inited() && tud_ready() && tud_connected();
|
||||
}
|
||||
@@ -84,15 +84,16 @@ int main(void) {
|
||||
mg_timer_add(&mgr, 500, MG_TIMER_REPEAT, blink_cb, &mgr);
|
||||
|
||||
MG_INFO(("Init TCP/IP stack ..."));
|
||||
struct mip_driver driver = {.tx = usb_tx, .rx = mip_driver_rx, .up = usb_up};
|
||||
struct mip_if mif = {.mac = {2, 0, 1, 2, 3, 0x77},
|
||||
.ip = mg_htonl(MG_U32(192, 168, 3, 1)),
|
||||
.mask = mg_htonl(MG_U32(255, 255, 255, 0)),
|
||||
.enable_dhcp_server = true,
|
||||
.driver = &driver,
|
||||
.queue.len = 4096};
|
||||
struct mg_tcpip_driver driver = {
|
||||
.tx = usb_tx, .rx = mg_tcpip_driver_rx, .up = usb_up};
|
||||
struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 0x77},
|
||||
.ip = mg_htonl(MG_U32(192, 168, 3, 1)),
|
||||
.mask = mg_htonl(MG_U32(255, 255, 255, 0)),
|
||||
.enable_dhcp_server = true,
|
||||
.driver = &driver,
|
||||
.queue.len = 4096};
|
||||
s_ifp = &mif;
|
||||
mip_init(&mgr, &mif);
|
||||
mg_tcpip_init(&mgr, &mif);
|
||||
mg_http_listen(&mgr, "tcp://0.0.0.0:80", fn, &mgr);
|
||||
|
||||
MG_INFO(("Init USB ..."));
|
||||
|
||||
@@ -9,9 +9,9 @@ SOURCES = main.c syscalls.c sysinit.c
|
||||
SOURCES += cmsis_f7/Source/Templates/gcc/startup_stm32f746xx.s # ST startup file. Compiler-dependent!
|
||||
|
||||
# Mongoose-specific source code files and build options. See https://mongoose.ws/documentation/#build-options
|
||||
SOURCES += ../../../mongoose.c ../../device-dashboard/net.c ../../device-dashboard/packed_fs.c
|
||||
CFLAGS += -I../../.. -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_CUSTOM_MILLIS=1
|
||||
CFLAGS += -DMG_ENABLE_CUSTOM_RANDOM=1 -DMG_ENABLE_MIP=1 -DMG_ENABLE_PACKED_FS=1 $(CFLAGS_EXTRA)
|
||||
SOURCES += mongoose.c net.c packed_fs.c
|
||||
CFLAGS += -DMG_ENABLE_TCPIP=1 -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_CUSTOM_MILLIS=1
|
||||
CFLAGS += -DMG_ENABLE_CUSTOM_RANDOM=1 -DMG_ENABLE_PACKED_FS=1 $(CFLAGS_EXTRA)
|
||||
|
||||
all build example: firmware.bin
|
||||
|
||||
|
||||
@@ -30,7 +30,7 @@ void mg_random(void *buf, size_t len) { // Use on-board RNG
|
||||
|
||||
static void timer_fn(void *arg) {
|
||||
gpio_toggle(LED); // Blink LED
|
||||
struct mip_if *ifp = arg; // And show
|
||||
struct mg_tcpip_if *ifp = arg; // And show
|
||||
const char *names[] = {"down", "up", "ready"}; // network stats
|
||||
MG_INFO(("Ethernet: %s, IP: %M, rx:%u, tx:%u, dr:%u, er:%u",
|
||||
names[ifp->state], mg_print_ip4, &ifp->ip, ifp->nrecv, ifp->nsent,
|
||||
@@ -66,10 +66,10 @@ int main(void) {
|
||||
// Initialise Mongoose network stack
|
||||
// Specify MAC address, and IP/mask/GW in network byte order for static
|
||||
// IP configuration. If IP/mask/GW are unset, DHCP is going to be used
|
||||
struct mip_driver_stm32_data driver_data = {.mdc_cr = 4}; // driver_stm32.h
|
||||
struct mip_if mif = {.driver = &mip_driver_stm32,
|
||||
struct mg_tcpip_driver_stm32_data driver_data = {.mdc_cr = 4}; // driver_stm32.h
|
||||
struct mg_tcpip_if mif = {.driver = &mg_tcpip_driver_stm32,
|
||||
.driver_data = &driver_data};
|
||||
mip_init(&mgr, &mif);
|
||||
mg_tcpip_init(&mgr, &mif);
|
||||
mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif);
|
||||
|
||||
MG_INFO(("Waiting until network is up..."));
|
||||
|
||||
@@ -0,0 +1 @@
|
||||
../../../mongoose.c
|
||||
@@ -0,0 +1 @@
|
||||
../../../mongoose.h
|
||||
@@ -0,0 +1 @@
|
||||
../../device-dashboard/net.c
|
||||
@@ -0,0 +1 @@
|
||||
../../device-dashboard/packed_fs.c
|
||||
@@ -6,7 +6,7 @@ It implements the following:
|
||||
- Minimal elementary web server, as simple as possible
|
||||
- No dependencies: no HAL, no CMSIS
|
||||
- Hand-written [mcu.h](mcu.h) header based on the [datasheet](https://www.st.com/resource/en/reference_manual/rm0385-stm32f75xxx-and-stm32f74xxx-advanced-armbased-32bit-mcus-stmicroelectronics.pdf)
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/mip_driver_stm32.c)
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/driver_stm32.c)
|
||||
- Blue LED blinky, based on another FreeRTOS task
|
||||
- Debug log on UART3 (st-link)
|
||||
|
||||
|
||||
@@ -51,7 +51,7 @@ static void ethernet_init(void) {
|
||||
}
|
||||
|
||||
static void timer_fn(void *arg) {
|
||||
struct mip_if *ifp = arg; // And show
|
||||
struct mg_tcpip_if *ifp = arg; // And show
|
||||
const char *names[] = {"down", "up", "ready"}; // network stats
|
||||
MG_INFO(("Ethernet: %s, IP: %M, rx:%u, tx:%u, dr:%u, er:%u",
|
||||
names[ifp->state], mg_print_ip4, &ifp->ip, ifp->nrecv, ifp->nsent,
|
||||
@@ -68,10 +68,10 @@ static void server(void *args) {
|
||||
// IP configuration. If IP/mask/GW are unset, DHCP is going to be used
|
||||
MG_INFO(("Initializing Ethernet driver"));
|
||||
ethernet_init();
|
||||
struct mip_driver_stm32_data driver_data = {.mdc_cr = 4};
|
||||
struct mip_if mif = {.driver = &mip_driver_stm32,
|
||||
.driver_data = &driver_data};
|
||||
mip_init(&mgr, &mif);
|
||||
struct mg_tcpip_driver_stm32_data driver_data = {.mdc_cr = 4};
|
||||
struct mg_tcpip_if mif = {.driver = &mg_tcpip_driver_stm32,
|
||||
.driver_data = &driver_data};
|
||||
mg_tcpip_init(&mgr, &mif);
|
||||
|
||||
MG_INFO(("Starting Mongoose v%s", MG_VERSION)); // Tell the world
|
||||
mg_http_listen(&mgr, "http://0.0.0.0", fn, &mgr); // Web listener
|
||||
|
||||
@@ -4,6 +4,6 @@
|
||||
|
||||
// See https://mongoose.ws/documentation/#build-options
|
||||
#define MG_ARCH MG_ARCH_FREERTOS
|
||||
#define MG_ENABLE_MIP 1
|
||||
#define MG_ENABLE_TCPIP 1
|
||||
#define MG_IO_SIZE 256
|
||||
#define MG_ENABLE_CUSTOM_RANDOM 1
|
||||
@@ -18,7 +18,7 @@ SOURCES += tinyusb/src/tusb.c \
|
||||
tinyusb/lib/networking/rndis_reports.c \
|
||||
usb_descriptors.c
|
||||
CFLAGS += -Itinyusb/src -Itinyusb/lib/networking
|
||||
CFLAGS += -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_MIP=1 -DMG_ENABLE_PACKED_FS=1 -DMG_IO_SIZE=512 -DMG_ENABLE_CUSTOM_MILLIS=1
|
||||
CFLAGS += -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_TCPIP=1 -DMG_ENABLE_PACKED_FS=1 -DMG_IO_SIZE=512 -DMG_ENABLE_CUSTOM_MILLIS=1
|
||||
CFLAGS += -DSTM32F746xx
|
||||
CFLAGS += -Wno-conversion -Wno-sign-conversion
|
||||
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
|
||||
#define LED PIN('B', 7) // On-board LED pin (blue)
|
||||
static uint64_t s_ticks;
|
||||
static struct mip_if *s_ifp;
|
||||
static struct mg_tcpip_if *s_ifp;
|
||||
uint32_t SystemCoreClock = SYS_FREQUENCY;
|
||||
const uint8_t tud_network_mac_address[6] = {2, 2, 0x84, 0x6A, 0x96, 0};
|
||||
|
||||
@@ -25,7 +25,7 @@ void SysTick_Handler(void) { // SyStick IRQ handler, triggered every 1ms
|
||||
}
|
||||
|
||||
bool tud_network_recv_cb(const uint8_t *buf, uint16_t len) {
|
||||
mip_qwrite((void *) buf, len, s_ifp);
|
||||
mg_tcpip_qwrite((void *) buf, len, s_ifp);
|
||||
// MG_INFO(("RECV %hu", len));
|
||||
// mg_hexdump(buf, len);
|
||||
tud_network_recv_renew();
|
||||
@@ -45,7 +45,7 @@ uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg) {
|
||||
return arg;
|
||||
}
|
||||
|
||||
static size_t usb_tx(const void *buf, size_t len, struct mip_if *ifp) {
|
||||
static size_t usb_tx(const void *buf, size_t len, struct mg_tcpip_if *ifp) {
|
||||
if (!tud_ready()) return 0;
|
||||
while (!tud_network_can_xmit(len)) tud_task();
|
||||
tud_network_xmit((void *) buf, len);
|
||||
@@ -53,7 +53,7 @@ static size_t usb_tx(const void *buf, size_t len, struct mip_if *ifp) {
|
||||
return len;
|
||||
}
|
||||
|
||||
static bool usb_up(struct mip_if *ifp) {
|
||||
static bool usb_up(struct mg_tcpip_if *ifp) {
|
||||
(void) ifp;
|
||||
return tud_inited() && tud_ready() && tud_connected();
|
||||
}
|
||||
@@ -84,15 +84,16 @@ int main(void) {
|
||||
mg_timer_add(&mgr, 500, MG_TIMER_REPEAT, blink_cb, &mgr);
|
||||
|
||||
MG_INFO(("Init TCP/IP stack ..."));
|
||||
struct mip_driver driver = {.tx = usb_tx, .rx = mip_driver_rx, .up = usb_up};
|
||||
struct mip_if mif = {.mac = {2, 0, 1, 2, 3, 0x77},
|
||||
.ip = mg_htonl(MG_U32(192, 168, 3, 1)),
|
||||
.mask = mg_htonl(MG_U32(255, 255, 255, 0)),
|
||||
.enable_dhcp_server = true,
|
||||
.driver = &driver,
|
||||
.queue.len = 4096};
|
||||
struct mg_tcpip_driver driver = {
|
||||
.tx = usb_tx, .rx = mg_tcpip_driver_rx, .up = usb_up};
|
||||
struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 0x77},
|
||||
.ip = mg_htonl(MG_U32(192, 168, 3, 1)),
|
||||
.mask = mg_htonl(MG_U32(255, 255, 255, 0)),
|
||||
.enable_dhcp_server = true,
|
||||
.driver = &driver,
|
||||
.queue.len = 4096};
|
||||
s_ifp = &mif;
|
||||
mip_init(&mgr, &mif);
|
||||
mg_tcpip_init(&mgr, &mif);
|
||||
mg_http_listen(&mgr, "tcp://0.0.0.0:80", fn, &mgr);
|
||||
|
||||
MG_INFO(("Init USB ..."));
|
||||
@@ -103,8 +104,8 @@ int main(void) {
|
||||
gpio_init(PIN('A', 9), GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH,
|
||||
GPIO_PULL_NONE, 0); // VBUS
|
||||
gpio_init(PIN('A', 10), GPIO_MODE_AF, GPIO_OTYPE_OPEN_DRAIN, GPIO_SPEED_HIGH,
|
||||
GPIO_PULL_UP, 10); // ID
|
||||
RCC->AHB2ENR |= RCC_AHB2ENR_OTGFSEN; // Enable USB FS clock
|
||||
GPIO_PULL_UP, 10); // ID
|
||||
RCC->AHB2ENR |= RCC_AHB2ENR_OTGFSEN; // Enable USB FS clock
|
||||
tusb_init();
|
||||
|
||||
MG_INFO(("Init done, starting main loop ..."));
|
||||
|
||||
@@ -8,7 +8,7 @@ LDFLAGS ?= -Tlink.ld -nostartfiles -nostdlib --specs nano.specs -lc -lgcc -Wl,--
|
||||
SOURCES = startup.c main.c syscalls.c
|
||||
|
||||
# Add Mongoose-specific flags and source files
|
||||
CFLAGS += -I../../.. -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_CUSTOM_MILLIS=1 -DMG_ENABLE_MIP=1 -DMG_ENABLE_DRIVER_STM32H=1 -DMG_ENABLE_PACKED_FS=1
|
||||
CFLAGS += -I../../.. -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_CUSTOM_MILLIS=1 -DMG_ENABLE_TCPIP=1 -DMG_ENABLE_DRIVER_STM32H=1 -DMG_ENABLE_PACKED_FS=1
|
||||
SOURCES += ../../../mongoose.c ../../device-dashboard/net.c ../../device-dashboard/packed_fs.c
|
||||
|
||||
all build example: firmware.bin
|
||||
|
||||
@@ -10,7 +10,7 @@ which implements the following:
|
||||
- MQTT communication with a remote MQTT server
|
||||
- No dependencies: no HAL, no CMSIS, no RTOS
|
||||
- Hand-written [mcu.h](mcu.h) header based on the [datasheet](https://www.st.com/resource/en/reference_manual/rm0433-stm32h742-stm32h743753-and-stm32h750-value-line-advanced-armbased-32bit-mcus-stmicroelectronics.pdf)
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/mip_driver_stm32h.c)
|
||||
- Interrupt-driven [Ethernet driver](../../../drivers/driver_stm32h.c)
|
||||
- Debug log on UART3 (st-link)
|
||||
|
||||
## Requirements
|
||||
|
||||
@@ -55,14 +55,13 @@ int main(void) {
|
||||
// Initialise Mongoose network stack
|
||||
// Specify MAC address, and IP/mask/GW in network byte order for static
|
||||
// IP configuration. If IP/mask/GW are unset, DHCP is going to be used
|
||||
struct mip_driver_stm32h_data driver_data = {.mdc_cr =
|
||||
4}; // See driver_stm32h.h
|
||||
struct mip_if mif = {
|
||||
struct mg_tcpip_driver_stm32h_data driver_data = {.mdc_cr = 4};
|
||||
struct mg_tcpip_if mif = {
|
||||
.mac = {2, 0, 1, 2, 3, 5},
|
||||
.driver = &mip_driver_stm32h,
|
||||
.driver = &mg_tcpip_driver_stm32h,
|
||||
.driver_data = &driver_data,
|
||||
};
|
||||
mip_init(&mgr, &mif);
|
||||
mg_tcpip_init(&mgr, &mif);
|
||||
|
||||
MG_INFO(("Waiting until network is up..."));
|
||||
while (mif.state != MIP_STATE_READY) {
|
||||
|
||||
Reference in new issue
Block a user