remove references to MIP in examples (comments)

examples/ti/ek-tm4c1294xl-baremetal/README.md

@@ -1,47 +1 @@
-# Baremetal webserver on EK-TM4C1294XL
-
-This firmware uses experimental TCP/IP stack of the Mongoose Network Library,
-which implements the following:
-
-- A complete [HTTP device dashboard](../../device-dashboard) with:
-  - User authentication
-  - Real-time device data graph
-  - Coninfiguration display and update
-  - MQTT communication with a remote MQTT server
-- No dependencies: no HAL, no CMSIS, no RTOS
-- Hand-written [mcu.h](mcu.h) header based on the [datasheet](https://www.ti.com/lit/pdf/spms433)
-- Interrupt-driven Ethernet driver
-- LED blinky, based on SysTick interrupt
-- User button handler, turns off/on an LED, based on GPIO IRQs (interrupt-driven)
-- HardFault handler alternate blinks LEDs
-- Debug log on UART0 (ICDI)
-
-## Requirements
-
-- [GNU make](http://mongoose.ws/tutorials/tools/#gnu-make)
-- [ARM GCC](http://mongoose.ws/tutorials/tools/#arm-gcc)
-- [Uniflash](https://mongoose.ws/tutorials/ti/ek-tm4c1294xl-baremetal/#build-and-run) for flashing
-
-The links above will send you to tutorials on how to install each of those tools in your workstation for Linux, Mac, and Windows.
-
-
-## Usage
-
-Plugin your board into USB, and attach an Ethernet cable.
-To build:
-
-```sh
-$ make clean build
-```
-
-To flash: use Uniflash
-
-To see debug log, use any serial monitor program like `picocom` at 115200 bps and configure it to insert carriage returns after line feeds:
-
-```sh
-$ picocom /dev/ttyACM0 -i -b 115200 --imap=lfcrlf
-```
-
-There is also a [detailed tutorial on this example](https://mongoose.ws/tutorials/ti/ek-tm4c1294xl-baremetal/)
-
-For more details and benchmark data on MIP, check the [F746ZG example](../../stm32/nucleo-f746zg-baremetal/)
+See detailed tutorial at https://mongoose.ws/tutorials/ti/ek-tm4c1294xl-baremetal/

examples/ti/ek-tm4c1294xl-freertos/main.c

@@ -48,7 +48,7 @@ static void ethernet_init(void) {
 
 static void server(void *args) {
   struct mg_mgr mgr;        // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);        // and attach it to the MIP interface
+  mg_mgr_init(&mgr);        // and attach it to the interface
   mg_log_set(MG_LL_DEBUG);  // Set log level
 
   // Initialise Mongoose network stack