diff --git a/examples/Makefile b/examples/Makefile
index 5972212a..e7dd23b9 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -3,7 +3,7 @@
# `wildcard ./*/` works in both linux and linux/wine, while `wildcard */` enumerates nothing under wine
SUBDIRS = $(sort $(dir $(wildcard ./*/)))
-SUBDIRS:=$(filter-out ./ ./CC3200/ ./ESP8266_RTOS/ ./MSP432/, $(SUBDIRS))
+SUBDIRS:=$(filter-out ./ ./CC3200/ ./ESP8266_RTOS/ ./MSP432/ ./STM32F4_CC3100/, $(SUBDIRS))
ifeq ($(OS), Windows_NT)
SUBDIRS:=$(filter-out ./load_balancer/ ./netcat/ ./raspberry_pi_mjpeg_led/ ./captive_dns_server/, $(SUBDIRS))
diff --git a/examples/STM32F4_CC3100/Makefile b/examples/STM32F4_CC3100/Makefile
new file mode 100644
index 00000000..77a6ca9e
--- /dev/null
+++ b/examples/STM32F4_CC3100/Makefile
@@ -0,0 +1,13 @@
+SDK ?= $(shell cat sdk.version)
+SRC_DIR ?= $(realpath ../../..)
+
+.PHONY: all clean
+
+MAKEFLAGS += w
+
+all clean:
+ docker run --rm -i -v $(SRC_DIR):/src $(SDK) \
+ /bin/bash -c "\
+ make -C /src/mongoose mongoose.c mongoose.h && \
+ make -C /src/mongoose/examples/STM32F4_CC3100 -f Makefile.build $@ -$(MAKEFLAGS) \
+ "
diff --git a/examples/STM32F4_CC3100/Makefile.build b/examples/STM32F4_CC3100/Makefile.build
new file mode 100644
index 00000000..ca4cceba
--- /dev/null
+++ b/examples/STM32F4_CC3100/Makefile.build
@@ -0,0 +1,92 @@
+.PHONY: all clean
+
+CC3100_DRV_SRCS = driver.c device.c nonos.c socket.c netapp.c wlan.c
+
+CC3100_PLATFORM_SRCS = spi.c board.c cli_uart.c stm32f4xx_it.c system_stm32f4xx.c stm32f4xx_hal_msp.c
+
+STM32F4_SRCS = stm32f4xx_hal_spi.c stm32f4xx_hal_gpio.c stm32f4xx_hal_cortex.c\
+ stm32f4xx_hal.c stm32f4xx_hal_rcc.c stm32f4xx_hal_dma.c \
+ stm32f4xx_hal_pwr_ex.c stm32f4_discovery.c stm32f4xx_hal_i2c.c \
+ stm32f4xx_hal_uart.c stm32f4xx_hal_tim.c \
+ stm32f4xx_hal_tim_ex.c stm32f4xx_hal_rtc_ex.c stm32f4xx_hal_rtc.c
+
+SRCS = main.c mongoose.c startup_utils.c ${CC3100_DRV_SRCS} ${CC3100_PLATFORM_SRCS} ${STM32F4_SRCS}
+
+REPO_ROOT=./../../../
+CC3100_SDKROOT=/opt/CC3100SDK_1.2.0/cc3100-sdk
+STM32CUBEF4_ROOT=/opt/STM32CubeF4
+STM32CUBEF4_DRV_PATH=${STM32CUBEF4_ROOT}/Drivers
+
+CC = arm-none-eabi-gcc
+OBJCOPY = arm-none-eabi-objcopy
+
+FP_FLAGS = -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ARCH_FLAGS = -mthumb -mcpu=cortex-m4
+
+BUILD_DIR=.build
+OUT_DIR=out
+PROJECT=example
+BOARD=STM32F429xx
+STARTUP_SCRIPT=startup_stm32f429xx.s
+
+INCDIRS = $(addprefix -I,$(IPATH))
+
+OBJS = $(addprefix $(BUILD_DIR)/,$(patsubst %.c,%.o,$(SRCS)) $(patsubst %.s,%.o,$(STARTUP_SCRIPT)))
+
+VPATH = ${CC3100_SDKROOT}/simplelink/source\
+ ${CC3100_SDKROOT}/platform/stm32discovery\
+ ${STM32CUBEF4_ROOT}/Drivers/STM32F4xx_HAL_Driver/Src\
+ ${STM32CUBEF4_ROOT}/Drivers/BSP/STM32F4-Discovery\
+ ${REPO_ROOT}/mongoose
+
+# CC3100 SDK and STM32 SDK include headers w/out path, just like
+# #include "simplelink.h". As result, we have to add all required directories
+# into IPATH
+
+IPATH = . \
+ ${CC3100_SDKROOT}/simplelink/include\
+ ${CC3100_SDKROOT}/platform/stm32discovery\
+ ${STM32CUBEF4_DRV_PATH}/BSP/STM32F4-Discovery\
+ ${STM32CUBEF4_DRV_PATH}/STM32F4xx_HAL_Driver/Inc\
+ ${STM32CUBEF4_DRV_PATH}/CMSIS/Include\
+ ${STM32CUBEF4_DRV_PATH}/CMSIS/Device/ST/STM32F4xx/Include
+
+LDFLAGS = --static -nostartfiles
+LDLIBS = -Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group
+LDSCRIPT = stm32f429xx.ld
+
+INCDIRS = $(addprefix -I,$(IPATH))
+
+CFLAGS = ${FP_FLAGS} ${ARCH_FLAGS} ${INCDIRS}\
+ -D${BOARD} -DEXT_LIB_REGISTERED_GENERAL_EVENTS \
+ -DSL_FULL\
+ -DCS_PLATFORM=6\
+ -D__STM32F407xx_H\
+ -DMG_SIMPLELINK_NO_OSI \
+ -g -fno-common -ffunction-sections -fdata-sections \
+
+ELF = ${BUILD_DIR}/${PROJECT}.elf
+BIN = ${OUT_DIR}/${PROJECT}.bin
+
+all: ${BUILD_DIR} ${OUT_DIR} ${OBJS} ${ELF} ${BIN}
+
+${BUILD_DIR}:
+ mkdir -p $@
+
+${OUT_DIR}:
+ mkdir -p $@
+
+$(BUILD_DIR)/%.o: %.c
+ $(CC) ${CFLAGS} $^ -c -o $@
+
+$(BUILD_DIR)/%.o: %.s
+ $(CC) ${CFLAGS} $^ -c -o $@
+
+${ELF}: ${OBJS}
+ $(CC) ${ARCH_FLAGS} ${FP_FLAGS} $(LDFLAGS) $(OBJS) $(LDLIBS) -T$(LDSCRIPT) -o $@
+
+${BIN}: ${ELF}
+ $(OBJCOPY) -Obinary $^ $@
+
+clean:
+ rm -rf ${BUILD_DIR} ${OUT_DIR}
diff --git a/examples/STM32F4_CC3100/README.md b/examples/STM32F4_CC3100/README.md
new file mode 100644
index 00000000..afff81ea
--- /dev/null
+++ b/examples/STM32F4_CC3100/README.md
@@ -0,0 +1,85 @@
+# STM32F4 example project
+
+This example shows how to use mongoose on STM32 boards.
+To run it you will need:
+- [STM32F429-Discovery](http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-discovery-kits/32f429idiscovery.html) dev board
+- [CC3100](http://www.ti.com/product/CC3100) WiFi network processor
+
+## Wiring scheme
+
+By default, example uses SPI4 for communication with CC3100 and UART1 for
+the debug output. All parameters are described in file `stm32f4xx_hal_msp.h`,
+they can be changed to use another SPI and/or UART
+
+To use default scheme connect (CC3100 -> STM32-DISCO) connect:
+```
+DO -> PE5
+DIN -> PE6
+CLK -> PE2
+CS -> PB12
+IRQ -> PA0
+HIB -> PB0
+```
+
+## Building firmware
+
+Change `user_params.h`, put correct WiFi SSID and password there,
+also change `MQTT_BROKER_ADDRESS` to the real broker address.
+
+`make` in `mongoose/STM32F4_CC3100` will download required docker image and make
+firmware. Result will be in `STM32F4_CC3100/out` folder.
+
+## Uploading firmare
+
+Uploading firmware method depends on how you connected STM32 board to your
+computer. If it is connected via USB ST-LINK connected it is appears as
+a flash drive and in order to upload firmware just copy `out/example.bin`
+to that drive.
+
+## Running
+
+Compile two additional samples: `mqtt_broker` and `mqtt_client` and run them
+in different terminals.
+Press `reset` (or repower) STM board.
+The board will connect to broker and will start to publish its uptime in
+`/stuff` channel. `mqtt_client` is subscribed on this channel as well, so
+it should start to print
+
+```
+Got incoming message /stuff: Current tick: 99000
+Forwarding to /test
+Got incoming message /stuff: Current tick: 100120
+Forwarding to /test
+Got incoming message /stuff: Current tick: 101250
+Forwarding to /test
+...
+
+```
+
+If you connect UART to serial port monitor (pin PA9 or ST-LINK device, like /dev/ttyACM0)
+you should see device output:
+```
+**** Hello ****
+Initializing CC3100 on SPI4
+Starting WiFi connect
+Done, waiting for events
+Connected to WiFi
+Got IP
+Connected to 192.168.1.108:1883
+Connected to broker
+Subscribing to /test
+Subscription acknowledged
+Publishing message with tick=1
+Got incoming message /test: Current tick: 4487
+Publishing message with tick=2
+Got incoming message /test: Current tick: 5597
+Publishing message with tick=3
+Got incoming message /test: Current tick: 6717
+...
+
+```
+
+This output looks like this because the device sends messages `Current tick: ....`
+into `/stuff` channel, `mqtt_client` receives all messages in this channel
+and sends them to `/test` channel. But the device is subscribed to this channel
+so, it receives it back.
diff --git a/examples/STM32F4_CC3100/main.c b/examples/STM32F4_CC3100/main.c
new file mode 100644
index 00000000..d6c661ea
--- /dev/null
+++ b/examples/STM32F4_CC3100/main.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2014-2016 Cesanta Software Limited
+ * All rights reserved
+ */
+
+#include "./../../mongoose.h"
+#include "stm32f4xx_hal_msp.h"
+#include "stm32f4xx.h"
+#include "user_params.h"
+
+enum SampleState { ssIniting, ssConnectedWLAN, ssWorking, ssStopped };
+
+static enum SampleState state = ssIniting;
+static struct mg_mgr mgr;
+static int msg_id;
+
+void Error_Handler() {
+ /* Turn LED4 (red) on/off */
+ while (1) {
+ BSP_LED_Toggle(LED4);
+ Delay(100);
+ }
+}
+
+void SimpleLinkWlanEventHandler(SlWlanEvent_t *pWlanEvent) {
+ switch (pWlanEvent->Event) {
+ case SL_WLAN_CONNECT_EVENT:
+ CLI_Write("Connected to WiFi\r\n");
+ break;
+ case SL_WLAN_DISCONNECT_EVENT:
+ CLI_Write("Disconnected WiFi\r\n");
+ break;
+ default:
+ CLI_Write("Got Wlan event %d\r\n", pWlanEvent->Event);
+ break;
+ }
+}
+
+void SimpleLinkNetAppEventHandler(SlNetAppEvent_t *pNetAppEvent) {
+ switch (pNetAppEvent->Event) {
+ case SL_NETAPP_IPV4_IPACQUIRED_EVENT:
+ CLI_Write("Got IP\r\n");
+ state = ssConnectedWLAN;
+ break;
+ default:
+ CLI_Write("Got NetApp Event: %d\r\n", pNetAppEvent->Event);
+ break;
+ }
+}
+
+struct mg_mqtt_topic_expression topic_expressions[] = {{"/test", 0}};
+
+static void ev_handler(struct mg_connection *nc, int ev, void *p) {
+ struct mg_mqtt_message *msg = (struct mg_mqtt_message *) p;
+
+ switch (ev) {
+ case MG_EV_CONNECT:
+ if (*(int *) p != 0) {
+ CLI_Write("Failed to connect to %s\r\n", MQTT_BROKER_ADDRESS);
+ } else {
+ CLI_Write("Connected to %s\r\n", MQTT_BROKER_ADDRESS);
+ }
+ struct mg_send_mqtt_handshake_opts opts;
+ memset(&opts, 0, sizeof(opts));
+ opts.user_name = MQTT_USER_NAME;
+ opts.password = MQTT_USER_PWD;
+ mg_set_protocol_mqtt(nc);
+ mg_send_mqtt_handshake_opt(nc, "STM32", opts);
+ break;
+ case MG_EV_MQTT_CONNACK:
+ if (msg->connack_ret_code != MG_EV_MQTT_CONNACK_ACCEPTED) {
+ CLI_Write("Got mqtt connection error %d\n\r", msg->connack_ret_code);
+ } else {
+ CLI_Write("Connected to broker\n\r");
+ }
+ CLI_Write("Subscribing to /test\n\r");
+ mg_mqtt_subscribe(nc, topic_expressions,
+ sizeof(topic_expressions) / sizeof(*topic_expressions),
+ ++msg_id);
+ break;
+ case MG_EV_MQTT_SUBACK:
+ CLI_Write("Subscription acknowledged\r\n");
+ state = ssWorking;
+ break;
+ case MG_EV_MQTT_PUBLISH:
+ CLI_Write("Got incoming message %s: %.*s\r\n", msg->topic,
+ (int) msg->payload.len, msg->payload.p);
+ break;
+ case MG_EV_POLL:
+ if (state == ssWorking) {
+ char msg[100];
+ uint32_t tick = HAL_GetTick();
+ int len = snprintf(msg, sizeof(msg), "Current tick: %u", tick);
+ CLI_Write("Publishing message with tick=%u\r\n", tick);
+ mg_mqtt_publish(nc, "/stuff", ++msg_id, MG_MQTT_QOS(0), msg, len);
+ }
+ break;
+ case MG_EV_CLOSE:
+ CLI_Write("Connection to broker is closed\r\n");
+ state = ssStopped;
+ break;
+ default:
+ break;
+ }
+}
+
+int main(void) {
+ stopWDT();
+ initClk();
+
+ BSP_LED_Init(LED3);
+ BSP_LED_Init(LED4);
+
+ CLI_Configure();
+ CLI_Write("\n\n\n**** Hello ****\r\n");
+ CLI_Write("Initializing CC3100 on SPI%d\r\n", SPIx_NUMBER);
+
+ int ret = sl_Start(NULL, NULL, NULL);
+
+ SlSecParams_t sec_params;
+ memset(&sec_params, 0, sizeof(sec_params));
+ sec_params.Key = NET_PWD;
+ sec_params.KeyLen = sizeof(NET_PWD) - 1;
+ sec_params.Type = NET_SECURITY;
+
+ CLI_Write("Starting WiFi connect\r\n");
+
+ ret = sl_WlanConnect(NET_SSID, sizeof(NET_SSID) - 1, 0, &sec_params, NULL);
+
+ CLI_Write("Done, waiting for events\n\r");
+
+ while (1) {
+ BSP_LED_Toggle(LED3);
+ _SlNonOsMainLoopTask();
+ if (state == 1) {
+ mg_mgr_init(&mgr, NULL);
+ if (mg_connect(&mgr, MQTT_BROKER_ADDRESS, ev_handler) == NULL) {
+ CLI_Write("Failed to create connection\n\r");
+ }
+ state = 2;
+ }
+ mg_mgr_poll(&mgr, 1000);
+ }
+}
+
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *UartHandle) {
+ /* Turn LED4 (red) on: Transfer error in reception/transmission process */
+ BSP_LED_On(LED4);
+}
diff --git a/examples/STM32F4_CC3100/sdk.version b/examples/STM32F4_CC3100/sdk.version
new file mode 100644
index 00000000..04df6826
--- /dev/null
+++ b/examples/STM32F4_CC3100/sdk.version
@@ -0,0 +1 @@
+docker.cesanta.com/stm32-cc3100-build:stm32-1.10.0_cc3100-1.2.0-r1
diff --git a/examples/STM32F4_CC3100/startup_stm32f429xx.s b/examples/STM32F4_CC3100/startup_stm32f429xx.s
new file mode 100755
index 00000000..31632477
--- /dev/null
+++ b/examples/STM32F4_CC3100/startup_stm32f429xx.s
@@ -0,0 +1,561 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f429xx.s
+ * @author MCD Application Team
+ * @version V1.2.4
+ * @date 13-November-2015
+ * @brief STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m4
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr sp, =_estack /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+
+ /* External Interrupts */
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detection */
+ .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_IRQHandler /* EXTI Line0 */
+ .word EXTI1_IRQHandler /* EXTI Line1 */
+ .word EXTI2_IRQHandler /* EXTI Line2 */
+ .word EXTI3_IRQHandler /* EXTI Line3 */
+ .word EXTI4_IRQHandler /* EXTI Line4 */
+ .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .word CAN1_TX_IRQHandler /* CAN1 TX */
+ .word CAN1_RX0_IRQHandler /* CAN1 RX0 */
+ .word CAN1_RX1_IRQHandler /* CAN1 RX1 */
+ .word CAN1_SCE_IRQHandler /* CAN1 SCE */
+ .word EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM4_IRQHandler /* TIM4 */
+ .word I2C1_EV_IRQHandler /* I2C1 Event */
+ .word I2C1_ER_IRQHandler /* I2C1 Error */
+ .word I2C2_EV_IRQHandler /* I2C2 Event */
+ .word I2C2_ER_IRQHandler /* I2C2 Error */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_IRQHandler /* USART3 */
+ .word EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
+ .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
+ .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
+ .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
+ .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .word FMC_IRQHandler /* FMC */
+ .word SDIO_IRQHandler /* SDIO */
+ .word TIM5_IRQHandler /* TIM5 */
+ .word SPI3_IRQHandler /* SPI3 */
+ .word UART4_IRQHandler /* UART4 */
+ .word UART5_IRQHandler /* UART5 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .word ETH_IRQHandler /* Ethernet */
+ .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
+ .word CAN2_TX_IRQHandler /* CAN2 TX */
+ .word CAN2_RX0_IRQHandler /* CAN2 RX0 */
+ .word CAN2_RX1_IRQHandler /* CAN2 RX1 */
+ .word CAN2_SCE_IRQHandler /* CAN2 SCE */
+ .word OTG_FS_IRQHandler /* USB OTG FS */
+ .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .word USART6_IRQHandler /* USART6 */
+ .word I2C3_EV_IRQHandler /* I2C3 event */
+ .word I2C3_ER_IRQHandler /* I2C3 error */
+ .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
+ .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
+ .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
+ .word OTG_HS_IRQHandler /* USB OTG HS */
+ .word DCMI_IRQHandler /* DCMI */
+ .word 0 /* Reserved */
+ .word HASH_RNG_IRQHandler /* Hash and Rng */
+ .word FPU_IRQHandler /* FPU */
+ .word UART7_IRQHandler /* UART7 */
+ .word UART8_IRQHandler /* UART8 */
+ .word SPI4_IRQHandler /* SPI4 */
+ .word SPI5_IRQHandler /* SPI5 */
+ .word SPI6_IRQHandler /* SPI6 */
+ .word SAI1_IRQHandler /* SAI1 */
+ .word LTDC_IRQHandler /* LTDC_IRQHandler */
+ .word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */
+ .word DMA2D_IRQHandler /* DMA2D */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream0_IRQHandler
+ .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream1_IRQHandler
+ .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream2_IRQHandler
+ .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream3_IRQHandler
+ .thumb_set DMA1_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream4_IRQHandler
+ .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream5_IRQHandler
+ .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream6_IRQHandler
+ .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+
+ .weak ADC_IRQHandler
+ .thumb_set ADC_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM9_IRQHandler
+ .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM10_IRQHandler
+ .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM11_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak OTG_FS_WKUP_IRQHandler
+ .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_TIM12_IRQHandler
+ .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_TIM13_IRQHandler
+ .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_TIM14_IRQHandler
+ .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream7_IRQHandler
+ .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+
+ .weak FMC_IRQHandler
+ .thumb_set FMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream0_IRQHandler
+ .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream1_IRQHandler
+ .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream2_IRQHandler
+ .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream3_IRQHandler
+ .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream4_IRQHandler
+ .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+
+ .weak ETH_IRQHandler
+ .thumb_set ETH_IRQHandler,Default_Handler
+
+ .weak ETH_WKUP_IRQHandler
+ .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+ .weak CAN2_TX_IRQHandler
+ .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+ .weak CAN2_RX0_IRQHandler
+ .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+ .weak CAN2_RX1_IRQHandler
+ .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+ .weak CAN2_SCE_IRQHandler
+ .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+ .weak OTG_FS_IRQHandler
+ .thumb_set OTG_FS_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream5_IRQHandler
+ .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream6_IRQHandler
+ .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream7_IRQHandler
+ .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+
+ .weak USART6_IRQHandler
+ .thumb_set USART6_IRQHandler,Default_Handler
+
+ .weak I2C3_EV_IRQHandler
+ .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+ .weak I2C3_ER_IRQHandler
+ .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_OUT_IRQHandler
+ .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_IN_IRQHandler
+ .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+
+ .weak OTG_HS_WKUP_IRQHandler
+ .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+
+ .weak OTG_HS_IRQHandler
+ .thumb_set OTG_HS_IRQHandler,Default_Handler
+
+ .weak DCMI_IRQHandler
+ .thumb_set DCMI_IRQHandler,Default_Handler
+
+ .weak HASH_RNG_IRQHandler
+ .thumb_set HASH_RNG_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+
+ .weak UART7_IRQHandler
+ .thumb_set UART7_IRQHandler,Default_Handler
+
+ .weak UART8_IRQHandler
+ .thumb_set UART8_IRQHandler,Default_Handler
+
+ .weak SPI4_IRQHandler
+ .thumb_set SPI4_IRQHandler,Default_Handler
+
+ .weak SPI5_IRQHandler
+ .thumb_set SPI5_IRQHandler,Default_Handler
+
+ .weak SPI6_IRQHandler
+ .thumb_set SPI6_IRQHandler,Default_Handler
+
+ .weak SAI1_IRQHandler
+ .thumb_set SAI1_IRQHandler,Default_Handler
+
+ .weak LTDC_IRQHandler
+ .thumb_set LTDC_IRQHandler,Default_Handler
+
+ .weak LTDC_ER_IRQHandler
+ .thumb_set LTDC_ER_IRQHandler,Default_Handler
+
+ .weak DMA2D_IRQHandler
+ .thumb_set DMA2D_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/examples/STM32F4_CC3100/startup_utils.c b/examples/STM32F4_CC3100/startup_utils.c
new file mode 100644
index 00000000..aca2bed6
--- /dev/null
+++ b/examples/STM32F4_CC3100/startup_utils.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014-2016 Cesanta Software Limited
+ * All rights reserved
+ */
+
+#include
+
+/*
+ * STM's startup script requires __libc_init_array for successfull
+ * initialization.
+ * Oficially supported IDE (Keil, IAR...) provide this function.
+ * We use our own
+ */
+
+extern void (*__preinit_array_start[])(void) __attribute__((weak));
+extern void (*__preinit_array_end[])(void) __attribute__((weak));
+extern void (*__init_array_start[])(void) __attribute__((weak));
+extern void (*__init_array_end[])(void) __attribute__((weak));
+
+void __libc_init_array(void) {
+ size_t count;
+ size_t i;
+
+ count = __preinit_array_end - __preinit_array_start;
+ for (i = 0; i < count; i++) __preinit_array_start[i]();
+
+ count = __init_array_end - __init_array_start;
+ for (i = 0; i < count; i++) __init_array_start[i]();
+}
diff --git a/examples/STM32F4_CC3100/stm32f429xx.ld b/examples/STM32F4_CC3100/stm32f429xx.ld
new file mode 100755
index 00000000..e09a650c
--- /dev/null
+++ b/examples/STM32F4_CC3100/stm32f429xx.ld
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2016 Cesanta Software Limited
+ * All rights reserved
+ * GCC linker script for stm32f429. Based on startup sctipt
+ * (startup_stm32f429xx.s - COPYRIGHT 2015 STMicroelectronics)
+ */
+ENTRY(Reset_Handler)
+
+_estack = 0x2002FFFF; /* required by startup sctipt */
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 192K
+ CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K
+}
+
+SECTIONS
+{
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ *(.isr_vector)
+ . = ALIGN(4);
+ } >FLASH
+
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text)
+ *(.text*)
+ *(.glue_7t)
+ *(.eh_frame)
+ *(.init)
+ *(.fini)
+ . = ALIGN(4);
+ _etext = .;
+ } >FLASH
+
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata)
+ *(.rodata*)
+ . = ALIGN(4);
+ } >FLASH
+
+ _sidata = LOADADDR(.data); /* required by startup sctipt */
+
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .;
+ *(.data)
+ *(.data*)
+ . = ALIGN(4);
+ _edata = .;
+ } >RAM AT> FLASH
+
+ _siccmram = LOADADDR(.ccmram); /* required by startup sctipt */
+
+ .ccmram :
+ {
+ . = ALIGN(4);
+ _sccmram = .;
+ *(.ccmram)
+ *(.ccmram*)
+
+ . = ALIGN(4);
+ _eccmram = .;
+ } >CCMRAM AT> FLASH
+
+ . = ALIGN(4);
+ .bss :
+ {
+ _sbss = .;
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .;
+ __bss_end__ = _ebss;
+ } >RAM
+
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ . = ALIGN(4);
+ } >RAM
+}
diff --git a/examples/STM32F4_CC3100/stm32f4xx_hal_msp.h b/examples/STM32F4_CC3100/stm32f4xx_hal_msp.h
new file mode 100644
index 00000000..a1b7ec99
--- /dev/null
+++ b/examples/STM32F4_CC3100/stm32f4xx_hal_msp.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2014-2016 Cesanta Software Limited
+ * All rights reserved
+ */
+
+#ifndef CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_STM32F4XX_HAL_MSP_H_
+#define CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_STM32F4XX_HAL_MSP_H_
+
+/*
+ * Definitions for SPI used to communicate with CC3100
+ * All samples in STMCubeF4 use SPI4 for examples
+ * We do the same. See README.MD for details.
+ */
+#define SPIx_NUMBER 4
+#define SPIx SPI4
+#define SPIx_CLK_ENABLE() __HAL_RCC_SPI4_CLK_ENABLE()
+#define SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
+#define SPIx_MISO_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
+#define SPIx_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
+#define SPIx_NSS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
+
+#define SPIx_FORCE_RESET() __HAL_RCC_SPI4_FORCE_RESET()
+#define SPIx_RELEASE_RESET() __HAL_RCC_SPI4_RELEASE_RESET()
+
+#define SPIx_SCK_PIN GPIO_PIN_2
+#define SPIx_SCK_GPIO_PORT GPIOE
+#define SPIx_SCK_AF GPIO_AF5_SPI4
+#define SPIx_MISO_PIN GPIO_PIN_5
+#define SPIx_MISO_GPIO_PORT GPIOE
+#define SPIx_MISO_AF GPIO_AF5_SPI4
+#define SPIx_MOSI_PIN GPIO_PIN_6
+#define SPIx_MOSI_GPIO_PORT GPIOE
+#define SPIx_MOSI_AF GPIO_AF5_SPI4
+
+#define SPIx_IRQn SPI4_IRQn
+#define SPIx_IRQHandler SPI4_IRQHandler
+
+#define SPI_CS_PIN GPIO_PIN_12
+#define SPI_CS_PORT GPIOB
+
+/*
+ * CC3100 requires 2 additional pins for communication
+ * See http://processors.wiki.ti.com/index.php/CC31xx_SPI_Host_Interface
+ * for details
+ */
+
+#define MCU_IRQ_PIN GPIO_PIN_0
+#define MCU_IRQ_PORT GPIOA
+#define MCU_nHIB_PORT GPIOB
+#define MCU_nHIB_PIN GPIO_PIN_0
+
+/*
+ * Definitions used for debug uart.
+ * By default we use USART1, and this allows to connect serial port monitor
+ * to dedicated pin (PA9) and to ST-LINK port (/dev/ttyACM0 in Linux)
+ * See README.MD for details.
+ */
+#define USARTx USART1
+#define USART_SPEED 115200
+#define USARTx_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE();
+#define USARTx_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define USARTx_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+
+#define USARTx_FORCE_RESET() __HAL_RCC_USART1_FORCE_RESET()
+#define USARTx_RELEASE_RESET() __HAL_RCC_USART1_RELEASE_RESET()
+
+#define USARTx_TX_PIN GPIO_PIN_9
+#define USARTx_TX_GPIO_PORT GPIOA
+#define USARTx_TX_AF GPIO_AF7_USART1
+#define USARTx_RX_PIN GPIO_PIN_10
+#define USARTx_RX_GPIO_PORT GPIOA
+#define USARTx_RX_AF GPIO_AF7_USART1
+
+#endif /* CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_STM32F4XX_HAL_MSP_H_ */
diff --git a/examples/STM32F4_CC3100/user_params.h b/examples/STM32F4_CC3100/user_params.h
new file mode 100644
index 00000000..d380b827
--- /dev/null
+++ b/examples/STM32F4_CC3100/user_params.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2014-2016 Cesanta Software Limited
+ * All rights reserved
+ */
+
+#ifndef CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_USER_PARAMS_H_
+#define CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_USER_PARAMS_H_
+
+/* Put you WIFI parameters here */
+#define NET_SSID "my_ssid"
+#define NET_PWD "my_password"
+#define NET_SECURITY SL_SEC_TYPE_WPA_WPA2
+
+#define MQTT_BROKER_ADDRESS "192.168.1.108:1883"
+#define MQTT_USER_NAME NULL
+#define MQTT_USER_PWD NULL
+
+#endif /* CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_USER_PARAMS_H_ */
diff --git a/examples/mqtt_broker/mqtt_broker.c b/examples/mqtt_broker/mqtt_broker.c
index 8cb465e9..4c02f9b6 100644
--- a/examples/mqtt_broker/mqtt_broker.c
+++ b/examples/mqtt_broker/mqtt_broker.c
@@ -32,6 +32,8 @@ int main(void) {
}
nc->user_data = &brk;
+ printf("MQTT broker started on %s\n", address);
+
/*
* TODO: Add a HTTP status page that shows current sessions
* and subscriptions
diff --git a/mongoose.c b/mongoose.c
index e8ad3704..3a38a197 100644
--- a/mongoose.c
+++ b/mongoose.c
@@ -10440,8 +10440,6 @@ int sl_fs_init() {
/* Amalgamated: #include "common/platform.h" */
-#include
-
const char *inet_ntop(int af, const void *src, char *dst, socklen_t size) {
int res;
struct in_addr *in = (struct in_addr *) src;
@@ -10481,7 +10479,7 @@ int inet_pton(int af, const char *src, void *dst) {
#ifdef MG_MODULE_LINES
#line 1 "./src/../../common/platforms/simplelink/sl_mg_task.c"
#endif
-#if defined(MG_SOCKET_SIMPLELINK)
+#if defined(MG_SOCKET_SIMPLELINK) && !defined(MG_SIMPLELINK_NO_OSI)
/* Amalgamated: #include "mg_task.h" */
diff --git a/mongoose.h b/mongoose.h
index 2047cda2..ca7d5ebc 100644
--- a/mongoose.h
+++ b/mongoose.h
@@ -76,6 +76,7 @@
#define CS_P_ESP_LWIP 3
#define CS_P_CC3200 4
#define CS_P_MSP432 5
+#define CS_P_CC3100 6
/* If not specified explicitly, we guess platform by defines. */
#ifndef CS_PLATFORM
@@ -405,6 +406,57 @@ unsigned long os_random(void);
* All rights reserved
*/
+#ifndef CS_COMMON_PLATFORMS_PLATFORM_CC3100_H_
+#define CS_COMMON_PLATFORMS_PLATFORM_CC3100_H_
+#if CS_PLATFORM == CS_P_CC3100
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define MG_SOCKET_SIMPLELINK 1
+#define MG_DISABLE_SOCKETPAIR 1
+#define MG_DISABLE_SYNC_RESOLVER 1
+#define MG_DISABLE_POPEN 1
+#define MG_DISABLE_CGI 1
+#define MG_DISABLE_DAV 1
+#define MG_DISABLE_DIRECTORY_LISTING 1
+#define MG_DISABLE_FILESYSTEM 1
+
+/*
+ * CC3100 SDK and STM32 SDK include headers w/out path, just like
+ * #include "simplelink.h". As result, we have to add all required directories
+ * into Makefile IPATH and do the same thing (include w/out path)
+ */
+
+#include
+#include
+
+typedef int sock_t;
+#define INVALID_SOCKET (-1)
+
+#define to64(x) strtoll(x, NULL, 10)
+#define INT64_FMT PRId64
+#define INT64_X_FMT PRIx64
+#define SIZE_T_FMT "u"
+
+#define SOMAXCONN 8
+
+const char *inet_ntop(int af, const void *src, char *dst, socklen_t size);
+char *inet_ntoa(struct in_addr in);
+int inet_pton(int af, const char *src, void *dst);
+
+#endif /* CS_PLATFORM == CS_P_CC3100 */
+#endif /* CS_COMMON_PLATFORMS_PLATFORM_CC3100_H_ */
+/*
+ * Copyright (c) 2014-2016 Cesanta Software Limited
+ * All rights reserved
+ */
+
#ifndef CS_COMMON_PLATFORMS_PLATFORM_CC3200_H_
#define CS_COMMON_PLATFORMS_PLATFORM_CC3200_H_
#if CS_PLATFORM == CS_P_CC3200
@@ -657,6 +709,7 @@ int _stat(const char *pathname, struct stat *st);
#undef SL_INC_STD_BSD_API_NAMING
#include
+#include
/* Now define only the subset of the BSD API that we use.
* Notably, close(), read() and write() are not defined. */