diff --git a/examples/nxp/rt1020-evk-make-baremetal-builtin/Makefile b/examples/nxp/rt1020-evk-make-baremetal-builtin/Makefile
index 130cdadb..e446d3c2 100644
--- a/examples/nxp/rt1020-evk-make-baremetal-builtin/Makefile
+++ b/examples/nxp/rt1020-evk-make-baremetal-builtin/Makefile
@@ -3,7 +3,7 @@ CFLAGS += -Wformat-truncation -fno-common -Wconversion -Wno-sign-conversion
CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1021 #-DCPU_MIMXRT1021DAG5A
CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDSCRIPT = link_ram.ld
+LDSCRIPT = link.ld
LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map
SOURCES = main.c syscalls.c sysinit.c
@@ -11,7 +11,7 @@ SOURCES += cmsis_mcu/devices/MIMXRT1021/gcc/startup_MIMXRT1021.S # NXP startup f
CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS # Make startup code work as expected
# Mongoose options are defined in mongoose_custom.h
-SOURCES += mongoose.c
+SOURCES += mongoose.c net.c packed_fs.c
# Example specific build options. See README.md
CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\" -DHTTPS_URL=\"https://0.0.0.0/\"
@@ -22,12 +22,11 @@ else
RM = rm -rf
endif
+all build example update: SOURCES += flash_image.c
all build example: firmware.bin
-image: LDSCRIPT = link.ld
-image: SOURCES += flash_image.c net.c packed_fs.c # no room to run dashboard in RAM w/ default config
-image: CFLAGS += -DRUNINFLASH
-image: firmware.bin
+ram: LDSCRIPT = link_ram.ld
+ram: firmware.bin
firmware.bin: firmware.elf
arm-none-eabi-objcopy -O binary $< $@
@@ -37,7 +36,7 @@ firmware.elf: cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld Makefile
arm-none-eabi-size $@
flash: firmware.bin
- st-flash --reset write $< 0x8000000
+# flash
cmsis_core: # ARM CMSIS core headers
git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
@@ -57,6 +56,16 @@ endif
DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/4
update: firmware.bin
curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
+
+update updateram: CFLAGS += -DUART_DEBUG=LPUART2
+
+test: update
+ curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
+ grep 'READY, IP:' /tmp/output.txt # Check for network init
+
+
+updateram: ram
+ curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1 wm,e000ed0c,5fa0004"}'
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
@@ -66,12 +75,10 @@ update: firmware.bin
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}'
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}'
-test update testimage: CFLAGS += -DUART_DEBUG=LPUART2
-test: update
+testram: updateram
curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
grep 'READY, IP:' /tmp/output.txt # Check for network init
-testimage: image
clean:
$(RM) firmware.* *.su cmsis_core cmsis_mcu mbedtls *.zip
diff --git a/examples/nxp/rt1020-evk-make-baremetal-builtin/main.c b/examples/nxp/rt1020-evk-make-baremetal-builtin/main.c
index e44b248c..3fd164e5 100644
--- a/examples/nxp/rt1020-evk-make-baremetal-builtin/main.c
+++ b/examples/nxp/rt1020-evk-make-baremetal-builtin/main.c
@@ -31,31 +31,6 @@ static void timer_fn(void *arg) {
ifp->ndrop, ifp->nerr));
}
-#ifndef RUNINFLASH
-static void fn(struct mg_connection *c, int ev, void *ev_data) {
- struct mg_tcpip_if *ifp = (struct mg_tcpip_if *) c->fn_data;
- if (ev == MG_EV_HTTP_MSG) {
- struct mg_http_message *hm = (struct mg_http_message *) ev_data;
- if (mg_http_match_uri(hm, "/api/hello")) { // Request to /api/hello
- mg_http_reply(c, 200, "", "{%m:%u,%m:%u,%m:%u,%m:%u,%m:%u}\n",
- MG_ESC("eth"), ifp->state, MG_ESC("frames_received"),
- ifp->nrecv, MG_ESC("frames_sent"), ifp->nsent,
- MG_ESC("frames_dropped"), ifp->ndrop,
- MG_ESC("interface_errors"), ifp->nerr);
- } else if (mg_http_match_uri(hm, "/")) { // Index page
- mg_http_reply(
- c, 200, "", "%s",
- ""
- "Welcome to Mongoose
"
- "See /api/hello for REST example"
- "");
- } else { // All other URIs
- mg_http_reply(c, 404, "", "Not Found\n");
- }
- }
-}
-#endif
-
int main(void) {
gpio_output(LED); // Setup blue LED
uart_init(UART_DEBUG, 115200); // Initialise debug printf
@@ -84,11 +59,7 @@ int main(void) {
}
MG_INFO(("Initialising application..."));
-#ifdef RUNINFLASH
web_init(&mgr);
-#else
- mg_http_listen(&mgr, "http://0.0.0.0:80", fn, &mif);
-#endif
MG_INFO(("Starting event loop"));
for (;;) {
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/Makefile b/examples/nxp/rt1020-evk-make-freertos-builtin/Makefile
index 6fdeeaa9..b0879143 100644
--- a/examples/nxp/rt1020-evk-make-freertos-builtin/Makefile
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/Makefile
@@ -3,7 +3,8 @@ CFLAGS += -Wformat-truncation -fno-common -Wconversion -Wno-sign-conversion
CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1021 #-DCPU_MIMXRT1021DAG5A
CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDFLAGS ?= -Tlink_ram.ld -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map
+LDSCRIPT = link.ld
+LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map
SOURCES = main.c syscalls.c sysinit.c
SOURCES += cmsis_mcu/devices/MIMXRT1021/gcc/startup_MIMXRT1021.S # NXP startup file. Compiler-dependent!
@@ -16,7 +17,7 @@ CFLAGS += -IFreeRTOS-Kernel/include
CFLAGS += -IFreeRTOS-Kernel/portable/GCC/ARM_CM4F -Wno-conversion
# Mongoose options are defined in mongoose_custom.h
-SOURCES += mongoose.c
+SOURCES += mongoose.c net.c packed_fs.c
# Example specific build options. See README.md
CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\"
@@ -27,19 +28,23 @@ else
RM = rm -rf
endif
+all build example update: SOURCES += flash_image.c
all build example: firmware.bin
+ram: LDSCRIPT = link_ram.ld
+ram: firmware.bin
+
firmware.bin: firmware.elf
arm-none-eabi-objcopy -O binary $< $@
-firmware.elf: FreeRTOS-Kernel cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld mongoose_custom.h
+firmware.elf: FreeRTOS-Kernel cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld mongoose_custom.h
arm-none-eabi-gcc $(SOURCES) $(wildcard FreeRTOS-Kernel/*.c) $(CFLAGS) $(LDFLAGS) -o $@
flash: firmware.bin
- st-flash --reset write $< 0x8000000
+# flash
-cmsis_core: # ARM CMSIS core headers
- git clone --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
+cmsis_core: # ARM CMSIS core headers
+ git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
cmsis_mcu:
curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MIMXRT1021_DFP.17.0.0.pack -o $@.zip
mkdir $@ && cd $@ && unzip -q ../$@.zip
@@ -50,6 +55,16 @@ FreeRTOS-Kernel: # FreeRTOS sources
DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/4
update: firmware.bin
curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
+
+update updateram: CFLAGS += -DUART_DEBUG=LPUART2
+
+test: update
+ curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
+ grep 'READY, IP:' /tmp/output.txt # Check for network init
+
+
+updateram: ram
+ curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1 wm,e000ed0c,5fa0004"}'
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
@@ -59,11 +74,10 @@ update: firmware.bin
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}'
curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}'
-test update: CFLAGS += -DUART_DEBUG=LPUART2
-test: update
+testram: updateram
curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
grep 'READY, IP:' /tmp/output.txt # Check for network init
-# grep 'MQTT connected' /tmp/output.txt # Check for MQTT connection success
+
clean:
$(RM) firmware.* *.su cmsis_core cmsis_mcu FreeRTOS-Kernel *.zip
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/dcd.h b/examples/nxp/rt1020-evk-make-freertos-builtin/dcd.h
new file mode 120000
index 00000000..5f15d9b2
--- /dev/null
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/dcd.h
@@ -0,0 +1 @@
+../rt1020-evk-make-baremetal-builtin/dcd.h
\ No newline at end of file
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/flash_image.c b/examples/nxp/rt1020-evk-make-freertos-builtin/flash_image.c
new file mode 120000
index 00000000..1a2daa78
--- /dev/null
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/flash_image.c
@@ -0,0 +1 @@
+../rt1020-evk-make-baremetal-builtin/flash_image.c
\ No newline at end of file
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/flexspi.h b/examples/nxp/rt1020-evk-make-freertos-builtin/flexspi.h
new file mode 120000
index 00000000..5a44251b
--- /dev/null
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/flexspi.h
@@ -0,0 +1 @@
+../rt1020-evk-make-baremetal-builtin/flexspi.h
\ No newline at end of file
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/hal.h b/examples/nxp/rt1020-evk-make-freertos-builtin/hal.h
index a2ab9729..2e3b2204 100644
--- a/examples/nxp/rt1020-evk-make-freertos-builtin/hal.h
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/hal.h
@@ -301,3 +301,37 @@ static inline void ethernet_init(void) {
((OCOTP->CFG0 >> 19) ^ (OCOTP->CFG1 >> 19)) & 255, \
(OCOTP->CFG1 >> 10) & 255, OCOTP->CFG1 & 255 \
}
+
+static inline void flash_init(void) { // QSPI in FlexSPI
+ // set pins
+ clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT); // iomuxc_ipg_clk_s
+ gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05, 1); // set for DQS
+ IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05] |= IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin
+ gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_05, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
+ gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11, 1); // set for SS
+ IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11] |= IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin
+ gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_11, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
+ gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07, 1); // set for SCLK
+ IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07] |= IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin
+ periph_mux_config(kIOMUXC_FLEXSPI_A_SCLK_SELECT_INPUT, 0); // drive peripheral from B1_07
+ gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_07, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
+ gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08, 1); // set for DATA0
+ IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08] |= IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin
+ periph_mux_config(kIOMUXC_FLEXSPI_A_DATA0_SELECT_INPUT, 0); // drive peripheral from B1_08
+ gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_08, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
+ gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10, 1); // set for DATA1
+ IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10] |= IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin
+ periph_mux_config(kIOMUXC_FLEXSPI_A_DATA1_SELECT_INPUT, 0); // drive peripheral from B1_10
+ gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_10, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
+ gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09, 1); // set for DATA2
+ IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09] |= IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin
+ periph_mux_config(kIOMUXC_FLEXSPI_A_DATA2_SELECT_INPUT, 0); // drive peripheral from B1_09
+ gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_09, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
+ gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06, 1); // set for DATA3
+ IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06] |= IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin
+ periph_mux_config(kIOMUXC_FLEXSPI_A_DATA3_SELECT_INPUT, 0); // drive peripheral from B1_06
+ gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_06, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
+ // set FlexSPI clock
+ SETBITS(CCM->CSCMR1, CCM_CSCMR1_FLEXSPI_CLK_SEL_MASK | CCM_CSCMR1_FLEXSPI_PODF_MASK, CCM_CSCMR1_FLEXSPI_CLK_SEL(3) | CCM_CSCMR1_FLEXSPI_PODF(3)); // select PLL3 PFD0 /4
+ clock_periph(6, CCM_CCGR6_CG5_SHIFT, CLOCK_ON_RUN_WAIT); // enable
+}
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/link.ld b/examples/nxp/rt1020-evk-make-freertos-builtin/link.ld
new file mode 100644
index 00000000..d3f5c6f1
--- /dev/null
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/link.ld
@@ -0,0 +1,22 @@
+ENTRY(Reset_Handler);
+MEMORY {
+ flash_hdr(rx) : ORIGIN = 0x60000000, LENGTH = 8k
+ flash_irq(rx) : ORIGIN = 0x60002000, LENGTH = 1k
+ flash_code(rx) : ORIGIN = 0x60002400, LENGTH = 8183k
+
+ itcram(rx) : ORIGIN = 0x00000000, LENGTH = 64k
+ dtcram(rw) : ORIGIN = 0x20000000, LENGTH = 64k
+ ocram(rw) : ORIGIN = 0x20200000, LENGTH = 128k
+}
+__StackTop = ORIGIN(dtcram) + LENGTH(dtcram);
+
+SECTIONS {
+ .hdr : { FILL(0xff) ; KEEP(*(.cfg)) . = 0x1000 ; KEEP(*(.ivt)) . = 0x1020 ;
+ KEEP(*(.dat)) . = 0x1030 ; KEEP(*(.dcd)) . = 0x2000 ;} >flash_hdr
+ .irq : { KEEP(*(.isr_vector)) } > flash_irq
+ .text : { *(.text* .text.*) *(.rodata*) ; } > flash_code
+ .data : { __data_start__ = .; *(.data SORT(.data.*)) __data_end__ = .; } > dtcram AT > flash_code
+ __etext = LOADADDR(.data);
+ .bss : { __bss_start__ = .; *(.bss SORT(.bss.*) COMMON) __bss_end__ = .; } > dtcram
+ _end = .;
+}
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/main.c b/examples/nxp/rt1020-evk-make-freertos-builtin/main.c
index ea7bd3a3..2ef15ff7 100644
--- a/examples/nxp/rt1020-evk-make-freertos-builtin/main.c
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/main.c
@@ -3,6 +3,7 @@
#include "hal.h"
#include "mongoose.h"
+#include "net.h"
#define BLINK_PERIOD_MS 1000 // LED blinking period in millis
@@ -21,29 +22,6 @@ static void timer_fn(void *arg) {
ifp->ndrop, ifp->nerr));
}
-static void fn(struct mg_connection *c, int ev, void *ev_data) {
- struct mg_tcpip_if *ifp = (struct mg_tcpip_if *) c->fn_data;
- if (ev == MG_EV_HTTP_MSG) {
- struct mg_http_message *hm = (struct mg_http_message *) ev_data;
- if (mg_http_match_uri(hm, "/api/hello")) { // Request to /api/hello
- mg_http_reply(c, 200, "", "{%m:%u,%m:%u,%m:%u,%m:%u,%m:%u}\n",
- MG_ESC("eth"), ifp->state, MG_ESC("frames_received"),
- ifp->nrecv, MG_ESC("frames_sent"), ifp->nsent,
- MG_ESC("frames_dropped"), ifp->ndrop,
- MG_ESC("interface_errors"), ifp->nerr);
- } else if (mg_http_match_uri(hm, "/")) { // Index page
- mg_http_reply(
- c, 200, "", "%s",
- ""
- "Welcome to Mongoose
"
- "See /api/hello for REST example"
- "");
- } else { // All other URIs
- mg_http_reply(c, 404, "", "Not Found\n");
- }
- }
-}
-
static void server(void *args) {
struct mg_mgr mgr; // Initialise Mongoose event manager
mg_mgr_init(&mgr); // and attach it to the interface
@@ -68,7 +46,7 @@ static void server(void *args) {
}
MG_INFO(("Initialising application..."));
- mg_http_listen(&mgr, "http://0.0.0.0:80", fn, &mif);
+ web_init(&mgr);
MG_INFO(("Starting event loop"));
for (;;) mg_mgr_poll(&mgr, 1); // Infinite event loop
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/net.c b/examples/nxp/rt1020-evk-make-freertos-builtin/net.c
new file mode 120000
index 00000000..fe0e6f06
--- /dev/null
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/net.c
@@ -0,0 +1 @@
+../../device-dashboard/net.c
\ No newline at end of file
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/net.h b/examples/nxp/rt1020-evk-make-freertos-builtin/net.h
new file mode 120000
index 00000000..9de896ef
--- /dev/null
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/net.h
@@ -0,0 +1 @@
+../../device-dashboard/net.h
\ No newline at end of file
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/packed_fs.c b/examples/nxp/rt1020-evk-make-freertos-builtin/packed_fs.c
new file mode 120000
index 00000000..e06bf092
--- /dev/null
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/packed_fs.c
@@ -0,0 +1 @@
+../../device-dashboard/packed_fs.c
\ No newline at end of file
diff --git a/examples/nxp/rt1020-evk-make-freertos-builtin/sysinit.c b/examples/nxp/rt1020-evk-make-freertos-builtin/sysinit.c
index d60a5254..797445a6 100644
--- a/examples/nxp/rt1020-evk-make-freertos-builtin/sysinit.c
+++ b/examples/nxp/rt1020-evk-make-freertos-builtin/sysinit.c
@@ -69,38 +69,14 @@ void SystemInit(void) { // Called automatically by startup code (ints masked)
CCM_CBCMR_PRE_PERIPH_CLK_SEL(3)); // run from 500MHz clock
// 14.5 Table 14-4: uart_clk_root
// 14.4: uart_clk_root = PLL3/6 or OSC; CCM_CSCDR1 (14.7.9) defaults to
- // PLL3/6/1
+ // PLL3/6/1; but ROM boot code fiddles with the divider (9.5.3 Table 9-7)
CCM_ANALOG->PLL_USB1 |= CCM_ANALOG_PLL_USB1_POWER_MASK; // Power PLL on
while ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_LOCK_MASK) == 0)
spin(1); // wait until it is stable
CCM_ANALOG->PLL_USB1 &=
~CCM_ANALOG_PLL_USB1_BYPASS_MASK; // Disable Bypass (switch to PLL)
+ CCM->CSCDR1 &= ~(CCM_CSCDR1_UART_CLK_SEL_MASK | CCM_CSCDR1_UART_CLK_PODF_MASK);
rng_init(); // Initialise random number generator
// NXP startup code calls SystemInit BEFORE initializing RAM...
SysTick_Config(SYS_FREQUENCY / 1000); // Sys tick every 1ms
}
-
-#if 0
-__attribute__((section(".cfg"), used)) uint32_t __cfg[] = {0x1234abcd};
-
-extern uint32_t __isr_vector[];
-extern uint32_t __ivt_boot_data[];
-
-__attribute__((section(".ivt"), used)) uint32_t __ivt[8] = {
- 0x412000d1, // header: 41 - version, 2000 size, d1 tag
- (uint32_t) __isr_vector, // entry
- 0, // reserved
- 0, // dcd
- (uint32_t) __ivt_boot_data, // boot data
- (uint32_t) __ivt, // this is us - ivt absolute address
- 0, // csf absolute address
- 0, // reserved for HAB
-};
-
-__attribute__((section(".ivt"), used)) uint32_t __ivt_boot_data[] = {
- 0, // boot start location
- 64 * 1024, // size
- 0, // Plugin flag
- 0Xffffffff // empty - extra data word
-};
-#endif