Revert "Stop publish examples to mongoose repo"

This reverts commit 1a17e17c462bdd4e1d26d8742f8b7087273e04c2.

PUBLISHED_FROM=80028de308c9a021955d1425d2bfee8feb85f193

examples/PIC32/http_server/firmware/http_server.X/Makefile

@@ -0,0 +1,113 @@
+#
+#  There exist several targets which are by default empty and which can be 
+#  used for execution of your targets. These targets are usually executed 
+#  before and after some main targets. They are: 
+#
+#     .build-pre:              called before 'build' target
+#     .build-post:             called after 'build' target
+#     .clean-pre:              called before 'clean' target
+#     .clean-post:             called after 'clean' target
+#     .clobber-pre:            called before 'clobber' target
+#     .clobber-post:           called after 'clobber' target
+#     .all-pre:                called before 'all' target
+#     .all-post:               called after 'all' target
+#     .help-pre:               called before 'help' target
+#     .help-post:              called after 'help' target
+#
+#  Targets beginning with '.' are not intended to be called on their own.
+#
+#  Main targets can be executed directly, and they are:
+#  
+#     build                    build a specific configuration
+#     clean                    remove built files from a configuration
+#     clobber                  remove all built files
+#     all                      build all configurations
+#     help                     print help mesage
+#  
+#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
+#  .help-impl are implemented in nbproject/makefile-impl.mk.
+#
+#  Available make variables:
+#
+#     CND_BASEDIR                base directory for relative paths
+#     CND_DISTDIR                default top distribution directory (build artifacts)
+#     CND_BUILDDIR               default top build directory (object files, ...)
+#     CONF                       name of current configuration
+#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
+#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
+#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
+#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
+#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
+#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
+#
+# NOCDDL
+
+
+# Environment 
+MKDIR=mkdir
+CP=cp
+CCADMIN=CCadmin
+RANLIB=ranlib
+
+
+# build
+build: .build-post
+
+.build-pre:
+# Add your pre 'build' code here...
+
+.build-post: .build-impl
+# Add your post 'build' code here...
+
+
+# clean
+clean: .clean-post
+
+.clean-pre:
+# Add your pre 'clean' code here...
+# WARNING: the IDE does not call this target since it takes a long time to
+# simply run make. Instead, the IDE removes the configuration directories
+# under build and dist directly without calling make.
+# This target is left here so people can do a clean when running a clean
+# outside the IDE.
+
+.clean-post: .clean-impl
+# Add your post 'clean' code here...
+
+
+# clobber
+clobber: .clobber-post
+
+.clobber-pre:
+# Add your pre 'clobber' code here...
+
+.clobber-post: .clobber-impl
+# Add your post 'clobber' code here...
+
+
+# all
+all: .all-post
+
+.all-pre:
+# Add your pre 'all' code here...
+
+.all-post: .all-impl
+# Add your post 'all' code here...
+
+
+# help
+help: .help-post
+
+.help-pre:
+# Add your pre 'help' code here...
+
+.help-post: .help-impl
+# Add your post 'help' code here...
+
+
+
+# include project implementation makefile
+include nbproject/Makefile-impl.mk
+
+# include project make variables
+include nbproject/Makefile-variables.mk

examples/PIC32/http_server/firmware/http_server.X/nbproject/Makefile-genesis.properties

@@ -0,0 +1,9 @@
+#
+#Wed Oct 26 16:05:10 EEST 2016
+pic32mx_eth_sk2_encx24j600.languagetoolchain.dir=/opt/microchip/xc32/v1.42/bin
+pic32mx_eth_sk2_encx24j600.com-microchip-mplab-nbide-toolchainXC32-XC32LanguageToolchain.md5=7787462309de955deefcc6f5508f88a9
+pic32mx_eth_sk2_encx24j600.languagetoolchain.version=1.42
+configurations-xml=2f70242829ecb692b68d01a3f7c4e1e7
+com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=02b44c60b7ea0aab28d65f169487b894
+host.platform=linux
+conf.ids=pic32mx_eth_sk2_encx24j600

examples/PIC32/http_server/firmware/http_server.X/nbproject/Makefile-impl.mk

@@ -0,0 +1,69 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a pre- and a post- target defined where you can add customization code.
+#
+# This makefile implements macros and targets common to all configurations.
+#
+# NOCDDL
+
+
+# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
+# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
+# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
+# and .clean-reqprojects-conf unless SUB has the value 'no'
+SUB_no=NO
+SUBPROJECTS=${SUB_${SUB}}
+BUILD_SUBPROJECTS_=.build-subprojects
+BUILD_SUBPROJECTS_NO=
+BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
+CLEAN_SUBPROJECTS_=.clean-subprojects
+CLEAN_SUBPROJECTS_NO=
+CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
+
+
+# Project Name
+PROJECTNAME=http_server.X
+
+# Active Configuration
+DEFAULTCONF=pic32mx_eth_sk2_encx24j600
+CONF=${DEFAULTCONF}
+
+# All Configurations
+ALLCONFS=pic32mx_eth_sk2_encx24j600 
+
+
+# build
+.build-impl: .build-pre
+	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
+
+
+# clean
+.clean-impl: .clean-pre
+	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
+
+# clobber
+.clobber-impl: .clobber-pre .depcheck-impl
+	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=pic32mx_eth_sk2_encx24j600 clean
+
+
+
+# all
+.all-impl: .all-pre .depcheck-impl
+	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=pic32mx_eth_sk2_encx24j600 build
+
+
+
+# dependency checking support
+.depcheck-impl:
+#	@echo "# This code depends on make tool being used" >.dep.inc
+#	@if [ -n "${MAKE_VERSION}" ]; then \
+#	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
+#	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
+#	    echo "include \$${DEPFILES}" >>.dep.inc; \
+#	    echo "endif" >>.dep.inc; \
+#	else \
+#	    echo ".KEEP_STATE:" >>.dep.inc; \
+#	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
+#	fi

examples/PIC32/http_server/firmware/http_server.X/nbproject/Makefile-local-pic32mx_eth_sk2_encx24j600.mk

@@ -0,0 +1,36 @@
+#
+# Generated Makefile - do not edit!
+#
+#
+# This file contains information about the location of compilers and other tools.
+# If you commmit this file into your revision control server, you will be able to 
+# to checkout the project and build it from the command line with make. However,
+# if more than one person works on the same project, then this file might show
+# conflicts since different users are bound to have compilers in different places.
+# In that case you might choose to not commit this file and let MPLAB X recreate this file
+# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
+# least once so the file gets created and the project can be built. Finally, you can also
+# avoid using this file at all if you are only building from the command line with make.
+# You can invoke make with the values of the macros:
+# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...  
+#
+PATH_TO_IDE_BIN=/opt/microchip/mplabx/v3.40/mplab_ide/platform/../mplab_ide/modules/../../bin/
+# Adding MPLAB X bin directory to path.
+PATH:=/opt/microchip/mplabx/v3.40/mplab_ide/platform/../mplab_ide/modules/../../bin/:$(PATH)
+# Path to java used to run MPLAB X when this makefile was created
+MP_JAVA_PATH="/opt/microchip/mplabx/v3.40/sys/java/jre1.8.0_91/bin/"
+OS_CURRENT="$(shell uname -s)"
+MP_CC="/opt/microchip/xc32/v1.42/bin/xc32-gcc"
+MP_CPPC="/opt/microchip/xc32/v1.42/bin/xc32-g++"
+# MP_BC is not defined
+MP_AS="/opt/microchip/xc32/v1.42/bin/xc32-as"
+MP_LD="/opt/microchip/xc32/v1.42/bin/xc32-ld"
+MP_AR="/opt/microchip/xc32/v1.42/bin/xc32-ar"
+DEP_GEN=${MP_JAVA_PATH}java -jar "/opt/microchip/mplabx/v3.40/mplab_ide/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar"
+MP_CC_DIR="/opt/microchip/xc32/v1.42/bin"
+MP_CPPC_DIR="/opt/microchip/xc32/v1.42/bin"
+# MP_BC_DIR is not defined
+MP_AS_DIR="/opt/microchip/xc32/v1.42/bin"
+MP_LD_DIR="/opt/microchip/xc32/v1.42/bin"
+MP_AR_DIR="/opt/microchip/xc32/v1.42/bin"
+# MP_BC_DIR is not defined

examples/PIC32/http_server/firmware/http_server.X/nbproject/Makefile-variables.mk

@@ -0,0 +1,13 @@
+#
+# Generated - do not edit!
+#
+# NOCDDL
+#
+CND_BASEDIR=`pwd`
+# pic32mx_eth_sk2_encx24j600 configuration
+CND_ARTIFACT_DIR_pic32mx_eth_sk2_encx24j600=dist/pic32mx_eth_sk2_encx24j600/production
+CND_ARTIFACT_NAME_pic32mx_eth_sk2_encx24j600=http_server.X.production.hex
+CND_ARTIFACT_PATH_pic32mx_eth_sk2_encx24j600=dist/pic32mx_eth_sk2_encx24j600/production/http_server.X.production.hex
+CND_PACKAGE_DIR_pic32mx_eth_sk2_encx24j600=${CND_DISTDIR}/pic32mx_eth_sk2_encx24j600/package
+CND_PACKAGE_NAME_pic32mx_eth_sk2_encx24j600=httpserver.x.tar
+CND_PACKAGE_PATH_pic32mx_eth_sk2_encx24j600=${CND_DISTDIR}/pic32mx_eth_sk2_encx24j600/package/httpserver.x.tar

examples/PIC32/http_server/firmware/http_server.X/nbproject/Package-pic32mx_eth_sk2_encx24j600.bash

@@ -0,0 +1,73 @@
+#!/bin/bash -x
+
+#
+# Generated - do not edit!
+#
+
+# Macros
+TOP=`pwd`
+CND_CONF=pic32mx_eth_sk2_encx24j600
+CND_DISTDIR=dist
+TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging
+TMPDIRNAME=tmp-packaging
+OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/http_server.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+OUTPUT_BASENAME=http_server.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+PACKAGE_TOP_DIR=httpserver.x/
+
+# Functions
+function checkReturnCode
+{
+    rc=$?
+    if [ $rc != 0 ]
+    then
+        exit $rc
+    fi
+}
+function makeDirectory
+# $1 directory path
+# $2 permission (optional)
+{
+    mkdir -p "$1"
+    checkReturnCode
+    if [ "$2" != "" ]
+    then
+      chmod $2 "$1"
+      checkReturnCode
+    fi
+}
+function copyFileToTmpDir
+# $1 from-file path
+# $2 to-file path
+# $3 permission
+{
+    cp "$1" "$2"
+    checkReturnCode
+    if [ "$3" != "" ]
+    then
+        chmod $3 "$2"
+        checkReturnCode
+    fi
+}
+
+# Setup
+cd "${TOP}"
+mkdir -p ${CND_DISTDIR}/${CND_CONF}/package
+rm -rf ${TMPDIR}
+mkdir -p ${TMPDIR}
+
+# Copy files and create directories and links
+cd "${TOP}"
+makeDirectory ${TMPDIR}/httpserver.x/bin
+copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
+
+
+# Generate tar file
+cd "${TOP}"
+rm -f ${CND_DISTDIR}/${CND_CONF}/package/httpserver.x.tar
+cd ${TMPDIR}
+tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/httpserver.x.tar *
+checkReturnCode
+
+# Cleanup
+cd "${TOP}"
+rm -rf ${TMPDIR}

examples/PIC32/http_server/firmware/http_server.X/nbproject/private/configurations.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<configurationDescriptor version="62">
+  <projectmakefile>Makefile</projectmakefile>
+  <defaultConf>0</defaultConf>
+  <confs>
+    <conf name="pic32mx_eth_sk2_encx24j600" type="2">
+      <platformToolSN>:=MPLABComm-USB-Microchip:=&lt;vid>04D8:=&lt;pid>8107:=&lt;rev>0002:=&lt;man>Microchip Technology Incorporated:=&lt;prod>Explorer 16/32 PICkit on Board:=&lt;sn>BUR162971352:=&lt;drv>x:=&lt;xpt>h:=end</platformToolSN>
+      <languageToolchainDir>/opt/microchip/xc32/v1.42/bin</languageToolchainDir>
+      <mdbdebugger version="1">
+        <placeholder1>place holder 1</placeholder1>
+        <placeholder2>place holder 2</placeholder2>
+      </mdbdebugger>
+      <runprofile version="6">
+        <args></args>
+        <rundir></rundir>
+        <buildfirst>true</buildfirst>
+        <console-type>0</console-type>
+        <terminal-type>0</terminal-type>
+        <remove-instrumentation>0</remove-instrumentation>
+        <environment>
+        </environment>
+      </runprofile>
+    </conf>
+  </confs>
+</configurationDescriptor>

examples/PIC32/http_server/firmware/http_server.X/nbproject/private/private.xml

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
+    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
+    <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
+        <group>
+            <file>file:/home/alex/go/src/cesanta.com/mongoose/examples/PIC32/http_server/firmware/src/app.c</file>
+            <file>file:/home/alex/go/src/cesanta.com/mongoose/examples/PIC32/http_server/firmware/src/app.h</file>
+        </group>
+    </open-files>
+</project-private>

examples/PIC32/http_server/firmware/http_server.X/nbproject/project.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://www.netbeans.org/ns/project/1">
+    <type>com.microchip.mplab.nbide.embedded.makeproject</type>
+    <configuration>
+        <Harmony xmlns="Harmony" MHC="true"/>
+        <data xmlns="http://www.netbeans.org/ns/make-project/1">
+            <name>http_server</name>
+            <creation-uuid>e54023e9-3948-44ef-bf6f-29d8b223e555</creation-uuid>
+            <make-project-type>0</make-project-type>
+            <c-extensions>c</c-extensions>
+            <cpp-extensions/>
+            <header-extensions>h</header-extensions>
+            <asminc-extensions/>
+            <sourceEncoding>ISO-8859-1</sourceEncoding>
+            <make-dep-projects/>
+        </data>
+    </configuration>
+</project>