Compare commits

...
1 Commits
Author SHA1 Message Date
cpq 93f2939655 Make w5500 driver like the rest 2026-11-21 11:39:54 +00:00
17 changed files with 178 additions and 126 deletions

No files matched your search

+41 -6
View File
@@ -113,7 +113,9 @@ extern "C" {
#if MG_ARCH == MG_ARCH_ARMGCC
#ifndef _POSIX_TIMERS // Some newlib builds, e.g. Espressif's, define it
#define _POSIX_TIMERS
#endif
#include <ctype.h>
#if !defined(MG_ENABLE_LWIP) || !MG_ENABLE_LWIP
@@ -189,16 +191,18 @@ extern "C" {
#define MG_TLS MG_TLS_BUILTIN
#endif
#if !defined(MG_OTA) && defined(STM32F1) || defined(STM32F2) || \
defined(STM32F4) || defined(STM32F7)
#ifndef MG_OTA // Pick OTA for the STM32 family, unless set by the user
#if defined(STM32F1) || defined(STM32F2) || defined(STM32F4) || \
defined(STM32F7)
#define MG_OTA MG_OTA_STM32F
#elif !defined(MG_OTA) && defined(STM32H5)
#elif defined(STM32H5)
#define MG_OTA MG_OTA_STM32H5
#elif !defined(MG_OTA) && defined(STM32H7)
#elif defined(STM32H7)
#define MG_OTA MG_OTA_STM32H7
#elif !defined(MG_OTA) && defined(STM32C5)
#elif defined(STM32C5)
#define MG_OTA MG_OTA_STM32C5
#endif
#endif
// use HAL-defined execute-in-ram section
#ifndef MG_IRAM
@@ -4842,7 +4846,6 @@ void mg_tcpip_arp_request(struct mg_tcpip_if *ifp, uint32_t ip, uint8_t *mac);
// Built-in hardware drivers. Assign one to mg_tcpip_if.driver before calling
// mg_tcpip_init(). Each driver also requires a corresponding driver_data
// struct; see the matching driver header for details.
extern struct mg_tcpip_driver mg_tcpip_driver_w5500;
extern struct mg_tcpip_driver mg_tcpip_driver_w5100;
extern struct mg_tcpip_driver mg_tcpip_driver_tm4c;
extern struct mg_tcpip_driver mg_tcpip_driver_tms570;
@@ -4867,6 +4870,7 @@ extern struct mg_tcpip_driver mg_tcpip_driver_netc;
// SPI bus abstraction for SPI-attached network chips (e.g. W5500).
// Populate and assign to the driver's driver_data field.
struct mg_tcpip_spi {
@@ -4876,6 +4880,10 @@ struct mg_tcpip_spi {
void (*txn)(void *, uint8_t *write, uint8_t *read, size_t); // Full-duplex transfer: write and read len bytes simultaneously
};
// SPI bus for SPI-attached network chips, defined by the application.
// Used by the drivers' INIT macros, e.g. MG_TCPIP_DRIVER_W5500_INIT
extern struct mg_tcpip_spi mg_spi;
// Alignment attributes for DMA-capable Ethernet descriptor buffers.
// Use these on driver RX/TX descriptor arrays where the hardware requires
// specific alignment.
@@ -6038,6 +6046,33 @@ struct mg_tcpip_driver_tms570_data {
#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_W5500) && \
MG_ENABLE_DRIVER_W5500
extern struct mg_tcpip_driver mg_tcpip_driver_w5500;
// Initialises W5500 on mgr. The application defines
// struct mg_tcpip_spi mg_spi. Example: tutorials/rp/w5500-evb-pico
#define MG_TCPIP_DRIVER_W5500_INIT(mgr) \
do { \
static struct mg_tcpip_if mif_; \
mif_.ip = MG_TCPIP_IP; \
mif_.mask = MG_TCPIP_MASK; \
mif_.gw = MG_TCPIP_GW; \
mif_.driver = &mg_tcpip_driver_w5500; \
mif_.driver_data = &mg_spi; \
MG_SET_MAC_ADDRESS(mif_.mac); \
mg_tcpip_init((mgr), &mif_); \
MG_INFO(("Driver: w5500, MAC: %M", mg_print_mac, mif_.mac)); \
} while (0)
#ifndef MG_TCPIP_DRIVER_INIT
#define MG_TCPIP_DRIVER_INIT(x) MG_TCPIP_DRIVER_W5500_INIT(x)
#endif
#endif
#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_XMC) && MG_ENABLE_DRIVER_XMC
struct mg_tcpip_driver_xmc_data {
+27
View File
@@ -0,0 +1,27 @@
#pragma once
#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_W5500) && \
MG_ENABLE_DRIVER_W5500
extern struct mg_tcpip_driver mg_tcpip_driver_w5500;
// Initialises W5500 on mgr. The application defines
// struct mg_tcpip_spi mg_spi. Example: tutorials/rp/w5500-evb-pico
#define MG_TCPIP_DRIVER_W5500_INIT(mgr) \
do { \
static struct mg_tcpip_if mif_; \
mif_.ip = MG_TCPIP_IP; \
mif_.mask = MG_TCPIP_MASK; \
mif_.gw = MG_TCPIP_GW; \
mif_.driver = &mg_tcpip_driver_w5500; \
mif_.driver_data = &mg_spi; \
MG_SET_MAC_ADDRESS(mif_.mac); \
mg_tcpip_init((mgr), &mif_); \
MG_INFO(("Driver: w5500, MAC: %M", mg_print_mac, mif_.mac)); \
} while (0)
#ifndef MG_TCPIP_DRIVER_INIT
#define MG_TCPIP_DRIVER_INIT(x) MG_TCPIP_DRIVER_W5500_INIT(x)
#endif
#endif
+5 -1
View File
@@ -135,7 +135,6 @@ void mg_tcpip_arp_request(struct mg_tcpip_if *ifp, uint32_t ip, uint8_t *mac);
// Built-in hardware drivers. Assign one to mg_tcpip_if.driver before calling
// mg_tcpip_init(). Each driver also requires a corresponding driver_data
// struct; see the matching driver header for details.
extern struct mg_tcpip_driver mg_tcpip_driver_w5500;
extern struct mg_tcpip_driver mg_tcpip_driver_w5100;
extern struct mg_tcpip_driver mg_tcpip_driver_tm4c;
extern struct mg_tcpip_driver mg_tcpip_driver_tms570;
@@ -159,6 +158,7 @@ extern struct mg_tcpip_driver mg_tcpip_driver_netc;
#include "drivers/nrf52.h"
#include "drivers/rw612w.h"
#include "drivers/stm32f.h"
#include "drivers/w5500.h"
// SPI bus abstraction for SPI-attached network chips (e.g. W5500).
// Populate and assign to the driver's driver_data field.
@@ -169,6 +169,10 @@ struct mg_tcpip_spi {
void (*txn)(void *, uint8_t *write, uint8_t *read, size_t); // Full-duplex transfer: write and read len bytes simultaneously
};
// SPI bus for SPI-attached network chips, defined by the application.
// Used by the drivers' INIT macros, e.g. MG_TCPIP_DRIVER_W5500_INIT
extern struct mg_tcpip_spi mg_spi;
// Alignment attributes for DMA-capable Ethernet descriptor buffers.
// Use these on driver RX/TX descriptor arrays where the hardware requires
// specific alignment.
@@ -10,7 +10,12 @@
#define MG_ARCH MG_ARCH_CUSTOM
#define MG_ENABLE_TCPIP 1
#define MG_ENABLE_DRIVER_W5500 1
#define MG_ENABLE_TCPIP_DRIVER_INIT 0
// Fixed MAC address for the W5500 module
#define MG_SET_MAC_ADDRESS(mac) \
do { \
mac[0] = 2, mac[1] = 0, mac[2] = 1, mac[3] = 2; \
mac[4] = 3, mac[5] = 5; \
} while (0)
#define MG_ENABLE_TCPIP_PRINT_DEBUG_STATS 0
#define MG_ENABLE_CUSTOM_MILLIS 1
#define MG_ENABLE_CUSTOM_RANDOM 1
@@ -8,7 +8,8 @@
#define LED_PIN 21 // LED pin
struct mg_connection *mqtt_connection;
struct mg_tcpip_spi spi = {
// SPI bus used by the W5500 driver, see MG_TCPIP_DRIVER_W5500_INIT
struct mg_tcpip_spi mg_spi = {
NULL, // SPI metadata
[](void *) { digitalWrite(SS_PIN, LOW); SPI.beginTransaction(SPISettings()); },
[](void *) { digitalWrite(SS_PIN, HIGH); SPI.endTransaction(); },
@@ -21,7 +22,6 @@ struct mg_tcpip_spi spi = {
},
};
struct mg_mgr mgr; // Mongoose event manager
struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}}; // Network interface
uint64_t mg_millis(void) {
return millis();
@@ -79,7 +79,7 @@ static void mqtt_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
}
void reconnect_if_not_connected(void) {
if (mif.state == MG_TCPIP_STATE_READY && mqtt_connection == NULL) {
if (mgr.ifp->state == MG_TCPIP_STATE_READY && mqtt_connection == NULL) {
struct mg_mqtt_opts opts = {};
opts.clean = true;
mqtt_connection =
@@ -95,12 +95,9 @@ void setup() {
pinMode(SS_PIN, OUTPUT); // to communicate with W5500 Ethernet module
pinMode(LED_PIN, OUTPUT); // Initialise LED
mg_mgr_init(&mgr); // Initialise Mongoose event manager
mg_log_set(MG_LL_DEBUG); // Set debug log level
mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL); // Log serial
mif.driver = &mg_tcpip_driver_w5500; // Use W5500 built-in driver
mif.driver_data = &spi; // Pass SPI interface to W5500 driver
mg_tcpip_init(&mgr, &mif); // Initialise built-in TCP/IP stack
mg_mgr_init(&mgr); // Initialise Mongoose event manager and W5500 driver
}
void loop() {
@@ -10,7 +10,12 @@
#define MG_ARCH MG_ARCH_CUSTOM
#define MG_ENABLE_TCPIP 1
#define MG_ENABLE_DRIVER_W5500 1
#define MG_ENABLE_TCPIP_DRIVER_INIT 0
// Fixed MAC address for the W5500 module
#define MG_SET_MAC_ADDRESS(mac) \
do { \
mac[0] = 2, mac[1] = 0, mac[2] = 1, mac[3] = 2; \
mac[4] = 3, mac[5] = 5; \
} while (0)
#define MG_ENABLE_TCPIP_PRINT_DEBUG_STATS 0
#define MG_ENABLE_CUSTOM_MILLIS 1
#define MG_ENABLE_CUSTOM_RANDOM 1
+3 -6
View File
@@ -4,7 +4,8 @@
#define LED_PIN LED_BUILTIN // LED pin
#define SS_PIN 17 // Slave select pin for the W5500 module
struct mg_tcpip_spi spi = {
// SPI bus used by the W5500 driver, see MG_TCPIP_DRIVER_W5500_INIT
struct mg_tcpip_spi mg_spi = {
NULL, // SPI metadata
[](void *) { digitalWrite(SS_PIN, LOW); SPI.beginTransaction(SPISettings()); },
[](void *) { digitalWrite(SS_PIN, HIGH); SPI.endTransaction(); },
@@ -17,7 +18,6 @@ struct mg_tcpip_spi spi = {
},
};
struct mg_mgr mgr; // Mongoose event manager
struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}}; // Network interface
// Used by Mongoose for time tracking
uint64_t mg_millis(void) {
@@ -99,12 +99,9 @@ void setup() {
pinMode(SS_PIN, OUTPUT); // to communicate with W5500 Ethernet module
pinMode(LED_PIN, OUTPUT); // Initialise LED
mg_mgr_init(&mgr); // Initialise Mongoose event manager
mg_log_set(MG_LL_DEBUG); // Set debug log level
mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL); // Log serial
mif.driver = &mg_tcpip_driver_w5500; // Use W5500 built-in driver
mif.driver_data = &spi; // Pass SPI interface to W5500 driver
mg_tcpip_init(&mgr, &mif); // Initialise built-in TCP/IP stack
mg_mgr_init(&mgr); // Initialise Mongoose event manager and W5500 driver
// Setup HTTP & HTTPS listeners. Respond "ok" on any HTTP request
mg_http_listen(&mgr, "http://0.0.0.0:80", http_ev_handler, NULL);
@@ -11,7 +11,12 @@
#define MG_ENABLE_SOCKET 0
#define MG_ENABLE_TCPIP 1
#define MG_ENABLE_DRIVER_W5500 1
#define MG_ENABLE_TCPIP_DRIVER_INIT 0
// Fixed MAC address for the W5500 module
#define MG_SET_MAC_ADDRESS(mac) \
do { \
mac[0] = 2, mac[1] = 0, mac[2] = 1, mac[3] = 2; \
mac[4] = 3, mac[5] = 5; \
} while (0)
#define MG_ENABLE_TCPIP_PRINT_DEBUG_STATS 0
#define MG_ENABLE_CUSTOM_MILLIS 1
#define MG_ENABLE_CUSTOM_RANDOM 1
+4 -7
View File
@@ -8,7 +8,8 @@
#define LED_PIN 21 // LED pin
struct mg_connection *mqtt_connection;
struct mg_tcpip_spi spi = {
// SPI bus used by the W5500 driver, see MG_TCPIP_DRIVER_W5500_INIT
struct mg_tcpip_spi mg_spi = {
NULL, // SPI metadata
[](void *) { digitalWrite(SS_PIN, LOW); SPI.beginTransaction(SPISettings()); },
[](void *) { digitalWrite(SS_PIN, HIGH); SPI.endTransaction(); },
@@ -21,7 +22,6 @@ struct mg_tcpip_spi spi = {
},
};
struct mg_mgr mgr; // Mongoose event manager
struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}}; // Network interface
uint64_t mg_millis(void) {
return millis();
@@ -79,7 +79,7 @@ static void mqtt_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
}
void reconnect_if_not_connected(void) {
if (mif.state == MG_TCPIP_STATE_READY && mqtt_connection == NULL) {
if (mgr.ifp->state == MG_TCPIP_STATE_READY && mqtt_connection == NULL) {
struct mg_mqtt_opts opts = {};
opts.clean = true;
mqtt_connection =
@@ -95,12 +95,9 @@ void setup() {
pinMode(SS_PIN, OUTPUT); // to communicate with W5500 Ethernet module
pinMode(LED_PIN, OUTPUT); // Initialise LED
mg_mgr_init(&mgr); // Initialise Mongoose event manager
mg_log_set(MG_LL_DEBUG); // Set debug log level
mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL); // Log serial
mif.driver = &mg_tcpip_driver_w5500; // Use W5500 built-in driver
mif.driver_data = &spi; // Pass SPI interface to W5500 driver
mg_tcpip_init(&mgr, &mif); // Initialise built-in TCP/IP stack
mg_mgr_init(&mgr); // Initialise Mongoose event manager and W5500 driver
}
void loop() {
+7 -18
View File
@@ -3,7 +3,6 @@
#include "hardware/spi.h"
#include "pico/stdlib.h"
#include "pico/unique_id.h"
#include "mongoose.h"
@@ -11,14 +10,17 @@ enum { SPI_CS = 17, SPI_CLK = 18, SPI_TX = 19, SPI_RX = 16 }; // Pins
// enum { SPI_CS = 5, SPI_CLK = 2, SPI_TX = 3, SPI_RX = 4 }; // Pins
static void spi_begin(void *spi) {
(void) spi;
gpio_put(SPI_CS, 0);
}
static void spi_end(void *spi) {
(void) spi;
gpio_put(SPI_CS, 1);
}
static void spi_txn(void *spi, uint8_t *tx, uint8_t *rx, size_t len) {
(void) spi;
if (tx != NULL && rx != NULL) {
spi_write_read_blocking(spi0, tx, rx, len);
} else if (tx != NULL) {
@@ -28,6 +30,9 @@ static void spi_txn(void *spi, uint8_t *tx, uint8_t *rx, size_t len) {
}
}
// SPI bus used by the W5500 driver, see MG_TCPIP_DRIVER_W5500_INIT
struct mg_tcpip_spi mg_spi = {NULL, spi_begin, spi_end, spi_txn};
static void ethernet_init(void) {
// Init SPI pins
spi_init(spi0, 500 * 1000);
@@ -39,14 +44,6 @@ static void ethernet_init(void) {
gpio_put(SPI_CS, 1); // And drive CS high (inactive)
}
// Construct MAC address from the unique board ID
static void generate_mac_from_board_id(unsigned char *mac) {
pico_unique_board_id_t board_id;
pico_get_unique_board_id(&board_id);
mac[0] = 2;
memcpy(&mac[1], &board_id.id[3], 5);
}
static void blink_task(void) {
static uint64_t timer;
if (mg_timer_expired(&timer, 500, mg_now())) {
@@ -106,17 +103,9 @@ static void log_fn(char ch, void *param) {
// In an RTOS environment, give this task 8 KB of stack space.
static void run_mongoose(void) {
struct mg_mgr mgr;
struct mg_tcpip_spi spi = {NULL, spi_begin, spi_end, spi_txn};
struct mg_tcpip_if mif = {
.driver = &mg_tcpip_driver_w5500,
.driver_data = &spi,
};
generate_mac_from_board_id(mif.mac);
mg_log_set_fn(log_fn, NULL);
mg_mgr_init(&mgr);
mg_tcpip_init(&mgr, &mif);
MG_INFO(("Driver: W5500, MAC: %M", mg_print_mac, mif.mac));
mg_http_listen(&mgr, "http://0.0.0.0", http_ev_handler, NULL);
mg_http_listen(&mgr, "https://0.0.0.0", http_ev_handler, NULL);
+10 -1
View File
@@ -8,4 +8,13 @@
#define MG_ENABLE_TCPIP 1
#define MG_ENABLE_DRIVER_W5500 1
#define MG_ENABLE_TCPIP_DRIVER_INIT 0
// Construct MAC address from the unique board ID
#define MG_SET_MAC_ADDRESS(mac) \
do { \
pico_unique_board_id_t id_; \
pico_get_unique_board_id(&id_); \
mac[0] = 2, mac[1] = id_.id[3]; \
mac[2] = id_.id[4], mac[3] = id_.id[5]; \
mac[4] = id_.id[6], mac[5] = id_.id[7]; \
} while (0)
+6 -12
View File
@@ -2,7 +2,6 @@
// SPDX-License-Identifier: GPL-2.0-only or commercial
#include "pico/stdlib.h"
#include "pico/unique_id.h"
#include "hardware/pio.h"
#include "mongoose.h"
@@ -97,14 +96,6 @@ static void piospi_done(PIO pio, uint sm) {
pio_interrupt_clear(pio, 0);
}
// Construct MAC address from the unique board ID
void genmac(unsigned char *mac) {
pico_unique_board_id_t board_id;
pico_get_unique_board_id(&board_id);
mac[0] = 2;
memcpy(&mac[1], &board_id.id[3], 5);
}
static pio_sm_config s_piospi_sm_config;
static uint s_piospi_sm_addr;
@@ -142,23 +133,26 @@ static void piospi_read(uint8_t *data, size_t len) {
piospi_done(SPIPIO, SPISM);
}
void spi_begin(void *spi) {
static void spi_begin(void *spi) {
(void) spi;
gpio_put(CSPIN, 0);
}
void spi_end(void *spi) {
static void spi_end(void *spi) {
(void) spi;
gpio_put(CSPIN, 1);
}
// either write or read, not both
void spi_txn(void *arg, uint8_t *txdata, uint8_t *rxdata, size_t len) {
static void spi_txn(void *arg, uint8_t *txdata, uint8_t *rxdata, size_t len) {
if (txdata != NULL) piospi_write(txdata, len);
if (rxdata != NULL) piospi_read(rxdata, len);
(void) arg;
}
// SPI bus used by the W5500 driver, see MG_TCPIP_DRIVER_W5500_INIT
struct mg_tcpip_spi mg_spi = {NULL, spi_begin, spi_end, spi_txn};
static void blink_task(void) {
static uint64_t timer;
@@ -16,33 +16,12 @@
// #define MG_TCPIP_GW MG_IPV4(192, 168, 1, 1)
// #define MG_TCPIP_MASK MG_IPV4(255, 255, 255, 0)
// Set custom MAC address. By default, it is randomly generated
// Using a build-time constant:
// #define MG_SET_MAC_ADDRESS(mac) do { uint8_t buf_[6] = {2,3,4,5,6,7};
// memmove(mac, buf_, sizeof(buf_)); } while (0)
//
// Using custom function:
extern void genmac(unsigned char *mac);
#define MG_SET_MAC_ADDRESS(mac) genmac(mac)
// Hardware specific SPI support
#include <stddef.h>
#include <stdint.h>
extern void spi_begin(void *);
extern void spi_end(void *);
extern void spi_txn(void *spi, uint8_t *tx, uint8_t *rx, size_t len);
#define MG_TCPIP_DRIVER_INIT(mgr) \
// Construct MAC address from the unique board ID
#define MG_SET_MAC_ADDRESS(mac) \
do { \
static struct mg_tcpip_spi spi_ = {NULL, spi_begin, spi_end, spi_txn}; \
static struct mg_tcpip_if mif_; \
mif_.ip = MG_TCPIP_IP; \
mif_.mask = MG_TCPIP_MASK; \
mif_.gw = MG_TCPIP_GW; \
mif_.driver = &mg_tcpip_driver_w5500; \
mif_.driver_data = &spi_; \
MG_SET_MAC_ADDRESS(mif_.mac); \
mg_tcpip_init(mgr, &mif_); \
MG_INFO(("Driver: W5500, MAC: %M", mg_print_mac, mif_.mac)); \
pico_unique_board_id_t id_; \
pico_get_unique_board_id(&id_); \
mac[0] = 2, mac[1] = id_.id[3]; \
mac[2] = id_.id[4], mac[3] = id_.id[5]; \
mac[4] = id_.id[6], mac[5] = id_.id[7]; \
} while (0)
@@ -4,13 +4,12 @@
CFLAGS = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion
CFLAGS += -Wformat-truncation -fno-common -Wconversion -Wno-sign-conversion
CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_g0/Include -Imongoose
CFLAGS += -I. -I../../../.. -Icmsis_core/CMSIS/Core/Include -Icmsis_g0/Include
CFLAGS += -mcpu=cortex-m0 -mthumb -mfloat-abi=soft $(CFLAGS_EXTRA)
LDFLAGS ?= -Tlink.ld -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections
SOURCES = main.c hal.c
SOURCES = main.c hal.c ../../../../mongoose.c
SOURCES += cmsis_g0/Source/Templates/gcc/startup_stm32g031xx.s
SOURCES += mongoose/mongoose.c
CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\"
@@ -19,7 +18,7 @@ all build example: firmware.bin
mongoose/mongoose.c mongoose/mongoose.h:
cp ../../../../mongoose.[ch] mongoose/
firmware.elf: cmsis_core cmsis_g0 hal.h link.ld Makefile $(SOURCES) mongoose/mongoose.h
firmware.elf: cmsis_core cmsis_g0 hal.h link.ld Makefile $(SOURCES) ../../../../mongoose.h
arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(CFLAGS_EXTRA) $(LDFLAGS) -o $@
firmware.bin: firmware.elf
@@ -21,6 +21,14 @@ static struct spi spi_pins = {
.cs = PIN('A', 4),
};
// SPI bus used by the W5500 driver, see MG_TCPIP_DRIVER_W5500_INIT
struct mg_tcpip_spi mg_spi = {
.begin = (void (*)(void *)) spi_begin,
.end = (void (*)(void *)) spi_end,
.txn = (void (*)(void *, uint8_t *, uint8_t *, size_t)) spi_txn,
.spi = &spi_pins,
};
static void log_fn(char ch, void *param) {
uart_write_buf(param, &ch, 1);
}
@@ -82,35 +90,19 @@ int main(void) {
// ethernet_init(); // Initialise ethernet pins
MG_INFO(("Starting, CPU freq %g MHz", (double) SystemCoreClock / 1000000));
spi_init(&spi_pins); // SPI must be ready before mg_mgr_init()
struct mg_mgr mgr; // Initialise
mg_mgr_init(&mgr); // Mongoose event manager
mg_log_set(MG_LL_DEBUG); // Set log level
mg_mgr_init(&mgr); // Mongoose event manager and W5500 driver
// Initialise Mongoose network stack
spi_init(&spi_pins);
struct mg_tcpip_spi spi = {
.begin = (void (*)(void *)) spi_begin,
.end = (void (*)(void *)) spi_end,
.txn = (void (*)(void *, uint8_t *, uint8_t *, size_t)) spi_txn,
.spi = &spi_pins,
};
struct mg_tcpip_if mif = {.mac = GENERATE_LOCALLY_ADMINISTERED_MAC(),
// Uncomment below for static configuration:
// .ip = mg_htonl(MG_U32(192, 168, 0, 223)),
// .mask = mg_htonl(MG_U32(255, 255, 255, 0)),
// .gw = mg_htonl(MG_U32(192, 168, 0, 1)),
.driver = &mg_tcpip_driver_w5500,
.driver_data = &spi};
mg_tcpip_init(&mgr, &mif);
MG_INFO(("MAC: %M. Waiting for IP...", mg_print_mac, mif.mac));
while (mif.state != MG_TCPIP_STATE_READY) {
MG_INFO(("Waiting for IP..."));
while (mgr.ifp->state != MG_TCPIP_STATE_READY) {
mg_mgr_poll(&mgr, 0);
}
MG_INFO(("Initialising application..."));
mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif);
mg_http_listen(&mgr, "http://0.0.0.0:80", fn, &mif);
mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, mgr.ifp);
mg_http_listen(&mgr, "http://0.0.0.0:80", fn, mgr.ifp);
MG_INFO(("Starting event loop"));
for (;;) {
@@ -1,11 +0,0 @@
#pragma once
// See https://mongoose.ws/docs/getting-started/build-environment/
#define MG_ARCH MG_ARCH_ARMGCC
#define MG_ENABLE_TCPIP 1
#define MG_ENABLE_DRIVER_W5500 1
#define MG_ENABLE_CUSTOM_MILLIS 1
#define MG_ENABLE_CUSTOM_RANDOM 1
#define MG_IO_SIZE 128
#define MG_ENABLE_LINES 1
@@ -0,0 +1,29 @@
#pragma once
// See https://mongoose.ws/docs/getting-started/build-environment/
#define MG_ARCH MG_ARCH_ARMGCC
#define MG_ENABLE_TCPIP 1
#define MG_ENABLE_DRIVER_W5500 1
#define MG_ENABLE_CUSTOM_MILLIS 1
#define MG_ENABLE_CUSTOM_RANDOM 1
#define MG_IO_SIZE 128
#define MG_ENABLE_LINES 1
// For static IP configuration, define MG_TCPIP_{IP,MASK,GW}
// #define MG_TCPIP_IP MG_IPV4(192, 168, 0, 223)
// #define MG_TCPIP_GW MG_IPV4(192, 168, 0, 1)
// #define MG_TCPIP_MASK MG_IPV4(255, 255, 255, 0)
// Construct MAC address from the MCU unique ID. It is defined in the
// ST CMSIS header as UID_BASE
#define MGUID ((uint32_t *) 0x1FFF7590) // Unique 96-bit chip ID
#define MG_SET_MAC_ADDRESS(mac) \
do { \
mac[0] = 2; \
mac[1] = MGUID[0] & 255; \
mac[2] = (MGUID[0] >> 10) & 255; \
mac[3] = (MGUID[0] >> 19) & 255; \
mac[4] = MGUID[1] & 255; \
mac[5] = MGUID[2] & 255; \
} while (0)