avoid 802.15.4 using a standard BSD function name, enable BSD test after mg_error() fix

Make mg_http_ota_cb public, add /ota endpoints to MCU examples

AGENTS.md

@@ -1,8 +1,12 @@
-# Mongoose - Embedded Network Library
+# Mongoose: a full-stack embedded networking library
+
+Mongoose is a full-stack embedded networking library for C/C++: a TCP/IP stack
+with drivers, TLS 1.3, an embedded web server (HTTP, WebSocket), MQTT and
+firmware OTA updates in two files, `mongoose.c` and `mongoose.h`. Mongoose runs on
+STM32, NXP and other microcontrollers, on bare metal or with an RTOS, with no
+external dependencies. Use it for cloud connectivity, device web dashboards,
+secure firmware updates and remote control.
 
-Mongoose is an open source, two-file C networking library and embedded web server for
-microcontrollers that combines TCP/IP stack, HTTP, WebSocket, MQTT, TLS 1.3
-stack, built-in firmware OTA updates, and device-dashboard infrastructure.
 License: GPLv2 or commercial.
 Website: https://mongoose.ws/
 GitHub repo: https://github.com/cesanta/mongoose

README.md

@@ -1,4 +1,4 @@
-# Mongoose - Embedded Web Server / Embedded Network Library
+# Mongoose: a full-stack embedded networking library
 
 [![License: GPLv2/Commercial](https://img.shields.io/badge/License-GPLv2%20or%20Commercial-green.svg)](https://opensource.org/licenses/gpl-2.0.php)
 [![Build Status]( https://github.com/cesanta/mongoose/actions/workflows/quicktest.yml/badge.svg)](https://github.com/cesanta/mongoose/actions)
@@ -7,11 +7,17 @@
 
 <img src="https://mongoose.ws/images/logo.svg" width="48" height="48"
 align="left" style="float:left;" />
-Two files. Drop `mongoose.c` and `mongoose.h` into any C/C++ project and get a
+Mongoose is a full-stack embedded networking library for C/C++: a TCP/IP stack
-full network stack — HTTP, WebSocket, MQTT, TLS, firmware OTA
+with drivers, TLS 1.3, an embedded web server (HTTP, WebSocket), MQTT and
-updates, device dashboard — on any microcontroller or desktop OS.
+firmware OTA updates in two files, `mongoose.c` and `mongoose.h`. Mongoose runs on
+STM32, NXP and other microcontrollers, on bare metal or with an RTOS, with no
+external dependencies. Use it for cloud connectivity, device web dashboards,
+secure firmware updates and remote control.
 
-On the market since 2004, used by vast number of open source and commercial
+Use it instead of lwIP + mbedTLS + httpd + an MQTT client + OTA glue code, or
+run it on top of lwIP or Zephyr.
+
+On the market since 2004, used by a vast number of open source and commercial
 products - it even runs on the International Space Station! Features include:
 
 - Cross-platform:
@@ -24,7 +30,7 @@ products - it even runs on the International Space Station! Features include:
 - Source code is both ISO C and ISO C++ compliant
 - Very easy to integrate
 - Own TCP/IP stack for bare metal / RTOS, or run on top of any existing one (lwIP, Zephyr, ...)
-- Built-in TLS 1.3 ECC stack. Also can use external TLS libraries - mbedTLS, OpenSSL, or other
+- Built-in TLS 1.3 stack. Also can use external TLS libraries - mbedTLS, OpenSSL, or other
 - Does not depend on any other software to implement networking
 - Built-in firmware updates for STM32 H5, STM32 H7, NXP IMXRT, RP2040/2350, ESP32 and more
 - Commercial support with proactive security updates; [CRA-compliant](https://mongoose.ws/security/cra-compliance/)
@@ -35,8 +41,32 @@ See https://mongoose.ws/ for complete documentation, videos, case studies, etc.
 
 ## Supported platforms
 
-Mongoose can work on top of any TCP/IP stack that supports BSD sockets API.
+Mongoose has its own built-in TCP/IP stack with drivers, so it needs no
-Platforms supported by the 3rd party TCP/IP stacks:
+additional software to implement networking. The built-in stack runs on bare
+metal and under any RTOS. Platforms supported by the Mongoose built-in TCP/IP
+stack:
+
+| MCU | Connectivity | Notes |
+| :-- | :----------- | :---- |
+| **STM32** | Built-in Ethernet | Ethernet-capable STM32F, STM32H5, STM32H7, STM32N6, STM32C5 variants |
+| **NXP i.MX RT** | Built-in Ethernet | RT102x, RT104x, RT105x, RT106x, RT117x, RT118x (NETC) |
+| **NXP MCX** | Built-in Ethernet | MCXN94x, MCXE247 |
+| **NXP RW612** | Eth, WiFi, 802.15.4 | Separate Ethernet and radio drivers |
+| **Microchip ATSAME54** | Built-in Ethernet | GMAC driver |
+| **Renesas RA** | Built-in Ethernet | RA6M, RA8M |
+| **Infineon XMC** | Built-in Ethernet | XMC4, XMC7 |
+| **Texas Instruments** | Built-in Ethernet | TM4C, TMS570 |
+| **RP2040, RP2350, STM32, others** | CYW43xx Wi-Fi chips | SPI or SDIO; Pico W, Pico 2 W, Pico RM2, Arduino Portenta H7 |
+| **STM32, others** | ST67W6 Wi-Fi modules | SPI; for example, STM32U5 with the ST67W611M1 module |
+| **MCUs with an NXP Wi-Fi SDK port** | NXP Wi-Fi | Requires the SDK's Wi-Fi port implementing the driver's network hooks |
+| **NXP MCXW71** | Built-in 802.15.4 radio | IPv4 over IEEE 802.15.4 |
+| **NXP RW612** | Built-in 802.15.4 radio | IPv4 over IEEE 802.15.4; requires NXP radio firmware |
+| **Any MCU with SPI** | W5500 or W5100 Ethernet chips | External Wiznet MAC+PHY |
+| **MCUs connected to a cellular modem** | Cellular | AT commands and PPP; for example, SIM800 |
+| **MCUs with CMSIS Ethernet drivers** | Ethernet via CMSIS-Driver | Requires CMSIS Ethernet MAC and PHY drivers |
+
+Mongoose can also run on top of any TCP/IP stack that supports the BSD
+sockets API. Platforms supported via 3rd party TCP/IP stacks:
 
 | TCP/IP stack    | Notes |
 | :-------------- | :------- |
@@ -45,23 +75,6 @@ Platforms supported by the 3rd party TCP/IP stacks:
 | **Other**       | Any other TCP/IP stack that supports BSD socket API, for example Amazon FreeRTOS-TCP |
 | **Linux, Mac, Windows**   | Workstations, server, single board computers, embedded Linux devices running on MPUs or FPGAs |
 
-Optionally, Mongoose provides its own built-in TCP/IP stack, eliminating the
-need for additional software to implement networking functionality. The
-built-in stack supports operation in both bare-metal and RTOS environments.
-Platforms supported by the Mongoose built-in TCP/IP stack:
-
-| Hardware       | Notes |
-| :------------- | :------- |
-| **STM32**      | All STM32 MCUs with built-in Ethernet: STM32Fxx, STM32H5xx, STM32H7xx |
-| **NXP**        |  All NXP MCUs with built-in Ethernet: IMXRT102x, IMXRT104x, IMXRT105x, IMXRT106x, IMXRT117x, RW612, MCXN94x   |
-| **Microchip**  | ATSAME54 MCUs with built-int Ethernet  |
-| **Renesas**    | RA5M, RA6M, RA8M MCUs with built-in Ethernet    |
-| **Infineon**   | XMC4, XMC7 MCUs with built-in Ethernet    |
-| **Texas Instruments**  |  TM4C, TMS570 MCUs with built-in Ethernet   |
-| **Cypress WiFi**  | Any MCU with CY43xx WiFi chips, like RP2040 Pico-W, RP2350 Pico2-W, Arduino Portenta    |
-| **Wiznet Ethernet**  | Any MCU that use Wiznet W5500 or Wiznet 5100 MAC+PHY chips    |
-| **Cellular**   | NRF9160, SIM800    |
-
 ## Usage Examples
 
 Below are quick snippets that should give an idea how simple the API is and
@@ -158,6 +171,17 @@ int main() {
 }
 ```
 
+## Licensing
+
+Mongoose is dual-licensed:
+- GPLv2: free for open source projects. Many popular open source projects use
+  Mongoose, for example
+  [SWUpdate](https://github.com/sbabic/swupdate/tree/master/mongoose), the
+  embedded Linux update framework
+- Commercial: for closed-source products. Includes support directly from the
+  engineers who wrote the whole stack, and early security fixes.
+  See [licensing](https://mongoose.ws/licensing/)
+
 ## Commercial use
 - Mongoose is used by hundreds of businesses, from Fortune500 giants like
   Siemens, Schneider Electric, Broadcom, Bosch, Google, Samsung, Qualcomm, Caterpillar to the small businesses
@@ -222,12 +246,12 @@ Technical guides and deep dives into embedded web servers, WebUI integration and
 - [lwIP vs Mongoose - TCP/IP Stack Integration Benchmark](https://mongoose.ws/articles/lwip-vs-mongoose-tcpip-stack-integration/)
 - [Embedded TCP/IP Stacks Comparison](https://mongoose.ws/embedded-tcpip-stack-comparison/)
 - [STM32H5 File System on Internal Flash: LittleFS + Mongoose](https://mongoose.ws/articles/stm32h5-file-system-on-internal-flash/)
-- [Firmware OTA and remote control on NXP FRDM-RW612](https://mongoose.ws/articles/mdash/)
+- [Firmware OTA and remote control on NXP FRDM-RW612](https://mongoose.ws/articles/rw612-mdash/)
 - [25000 WebSocket messages per second on STM32 Nucleo-H723ZG](https://mongoose.ws/articles/stm32-websocket-benchmark/)
 - [How to connect STM32 to AWS IoT Core](https://mongoose.ws/articles/stm32-aws-iot/)
 - [How to connect STM32 to Azure IoT Hub](https://mongoose.ws/articles/stm32-azure-iot-hub/)
 - [How to connect STM32 to EMQX](https://mongoose.ws/articles/stm32-emqx/)
-- [STM32 Device Management deep dive: Secure OTA, Remote Control, health monitor](https://mongoose.ws/articles/stm32-mdash-deep-dive/")
+- [STM32 Device Management deep dive: Secure OTA, Remote Control, health monitor](https://mongoose.ws/articles/stm32-mdash-deep-dive/)
 - [STM32 TCP/IP footprint: how much flash and RAM does Mongoose take?](https://mongoose.ws/articles/tcp-ip-footprint/)
 
 

SECURITY.md

@@ -0,0 +1,41 @@
+# Security Policy
+
+Mongoose is a full-stack embedded networking library by Cesanta Software Ltd,
+<https://mongoose.ws>. This policy covers how to report vulnerabilities
+and how Cesanta handles them.
+
+## Supported versions
+
+Security fixes go to the `master` branch and the latest release.
+
+## Reporting a vulnerability
+
+Do not report security issues in public GitHub issues. Report them
+privately using GitHub Security Advisories:
+<https://github.com/cesanta/mongoose/security/advisories/new>
+
+Include the Mongoose version or commit, steps or a proof of concept to reproduce, and
+the impact. Cesanta usually responds the same business day.
+
+## Disclosure process
+
+1. Cesanta reviews the report and coordinates a fix with the reporter.
+2. Eligible commercial customers receive a notification and a private fix
+   one month before the CVE becomes public.
+3. The fix and the CVE are then published. The reporter is credited in the
+   GitHub Security Advisory.
+
+## Security testing
+
+- CI on every push, unit tests built with ASAN and UBSan
+- CodeQL static analysis on every commit
+- Continuous fuzzing on OSS-Fuzz, plus nightly libFuzzer runs
+- AI-assisted security review on every pull request
+- Regular review by independent security research groups worldwide
+
+## EU Cyber Resilience Act (CRA)
+
+Mongoose supports CRA compliance for connected products: a documented
+vulnerability handling process (this file), TLS 1.3, signed OTA firmware
+updates, and an SBOM (`sbom.cdx.json`). Details:
+<https://mongoose.ws/security/cra-compliance/>

mongoose.h

@@ -165,6 +165,7 @@ extern "C" {
 
 #if MG_ENABLE_TCPIP && !defined(MG_ENABLE_DRIVER_STM32F) && \
     !defined(MG_ENABLE_DRIVER_STM32H) && !defined(MG_ENABLE_DRIVER_STM32N) && \
+    !defined(MG_ENABLE_DRIVER_STM32C) && \
     !defined(MG_ENABLE_DRIVER_CYW) && !defined(MG_ENABLE_DRIVER_CYW_SDIO) && \
     !defined(MG_ENABLE_DRIVER_ST67W6)
 #if defined(STM32F1) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7)
@@ -173,6 +174,8 @@ extern "C" {
 #define MG_ENABLE_DRIVER_STM32H 1
 #elif defined(STM32N6)
 #define MG_ENABLE_DRIVER_STM32N 1
+#elif defined(STM32C5)
+#define MG_ENABLE_DRIVER_STM32C 1
 #else
 #error Select a driver in mongoose_config.h
 #endif
@@ -189,70 +192,8 @@ extern "C" {
 #define MG_OTA MG_OTA_STM32H5
 #elif !defined(MG_OTA) && defined(STM32H7)
 #define MG_OTA MG_OTA_STM32H7
-#endif
+#elif !defined(MG_OTA) && defined(STM32C5)
-
+#define MG_OTA MG_OTA_STM32C5
-// OTA rollback timer via IWDG. Fixed 10 s hang-detection window (prescaler
-// /1024, LSI ~32 kHz: reload = 10 * 32000 / 1024 = 312). mg_ota_poll() feeds
-// the watchdog every 500 ms while in MG_OTA_TESTING state; if the event loop
-// hangs for 10 s, the IWDG fires and the device rolls back.
-// STM32H7 names the peripheral IWDG1; all others use IWDG.
-// The total evaluation period is set by MG_OTA_ROLLBACK_TIMEOUT_SECONDS.
-// STM32H7 names the watchdog peripheral IWDG1; all other families use IWDG.
-#if defined(IWDG1) && !defined(IWDG)
-#define MG_IWDG IWDG1
-#else
-#define MG_IWDG IWDG
-#endif
-// PR=6 → /256 prescaler, RLR=1250 → ~10 s at LSI 32 kHz.
-// Works on F4/F7/H5/H7; uses direct register writes so it is safe before HAL_Init().
-#ifndef MG_OTA_ROLLBACK_TIMER_START
-#define MG_OTA_ROLLBACK_TIMER_START()                                          \
-  do {                                                                         \
-    MG_IWDG->KR = 0xCCCCU;                              /* start + LSI  */    \
-    MG_IWDG->KR = 0x5555U;                              /* unlock PR/RLR */   \
-    MG_IWDG->PR = 6U;                                   /* /256         */    \
-    MG_IWDG->RLR = 1250U;                               /* 10 s         */    \
-    while (MG_IWDG->SR & (IWDG_SR_PVU | IWDG_SR_RVU)) (void) 0;              \
-    MG_IWDG->KR = 0xAAAAU;                              /* reload       */    \
-  } while (0)
-#endif
-
-// Feed (reload) the IWDG. Called from mg_ota_poll() every 500 ms.
-#ifndef MG_OTA_ROLLBACK_TIMER_FEED
-#define MG_OTA_ROLLBACK_TIMER_FEED() (MG_IWDG->KR = 0xAAAAU)
-#endif
-
-// OTA state in a backup register that survives warm resets but clears on POR.
-// STATE_GET reads work without any setup. STATE_SET enables the RTC APB clock
-// and unlocks backup domain write access via direct register writes, so it is
-// safe to call from any context (before or after HAL_Init).
-// H5 (TAMP->BKP0R), H7 (RTC->BKP0R), F4/F7 (RTC->BKP0R).
-#ifndef MG_OTA_STATE_GET
-#if defined(PWR_DBPCR_DBP)
-#define MG_OTA_DBP_ENABLE() (PWR->DBPCR |= PWR_DBPCR_DBP)
-#elif defined(PWR_CR1_DBP)
-#define MG_OTA_DBP_ENABLE() (PWR->CR1 |= PWR_CR1_DBP)
-#else
-#define MG_OTA_DBP_ENABLE() (PWR->CR |= PWR_CR_DBP)
-#endif
-
-#if defined(TAMP)
-#define MG_OTA_STATE_GET()                                           \
-  (RCC->APB3ENR |= RCC_APB3ENR_RTCAPBEN, TAMP->BKP0R)
-#define MG_OTA_STATE_SET(v)                                           \
-  (RCC->APB3ENR |= RCC_APB3ENR_RTCAPBEN, MG_OTA_DBP_ENABLE(),        \
-   (TAMP->BKP0R = (uint32_t) (v)), TAMP->BKP0R)
-#elif defined(RCC_APB4ENR_RTCAPBEN)
-#define MG_OTA_STATE_GET() (RTC->BKP0R)
-#define MG_OTA_STATE_SET(v)                                           \
-  (RCC->APB4ENR |= RCC_APB4ENR_RTCAPBEN, MG_OTA_DBP_ENABLE(),        \
-   (RTC->BKP0R = (uint32_t) (v)))
-#else
-#define MG_OTA_STATE_GET() (RTC->BKP0R)
-#define MG_OTA_STATE_SET(v)                                           \
-  (RCC->APB1ENR |= RCC_APB1ENR_PWREN, MG_OTA_DBP_ENABLE(),           \
-   (RTC->BKP0R = (uint32_t) (v)))
-#endif
 #endif
 
 // use HAL-defined execute-in-ram section
@@ -2783,29 +2724,32 @@ int mg_http_status(const struct mg_http_message *hm);
 
 // Streams a POST/PUT body to a callback as it arrives, without buffering it.
 // Call it from an MG_EV_HTTP_HDRS handler, after matching the request, e.g.
-// with mg_match(). Returns true if it took over the connection, false if the
+// with mg_match(). Always takes over the connection. Invalid requests receive
-// request is not POST/PUT, is chunked, or has no Content-Length.
+// an HTTP error; client-side failures call mg_error(). Replies and connection
+// draining are handled internally, including callback failures.
 //
 // Callback upload_fn(hm, data, user_data) is called:
 //   - at start: hm is set. Open the file, set *user_data.
 //   - per chunk: data is set, 512 byte aligned except the last. Not called
 //     again after a failure.
-//   - at end: both NULL. Always called once, also when the connection drops
+//   - at end: both NULL. Always called exactly once, including validation
-//     early, so release resources here. A truncated body looks like a complete
+//     failures before start and connections that drop early. Release resources
-//     one: validate before committing.
+//     here. A truncated body looks like a complete one: validate before
-// Return true on success, false on error.
+//     committing.
+// The callback returns true on success, false on error. A failure stops
+// streaming immediately and calls the end callback before closing.
 // Example:
-//   if (ev == MG_EV_HTTP_HDRS && mg_match(hm->uri, mg_str("/fs/*"), NULL) {
+//   if (ev == MG_EV_HTTP_HDRS && mg_match(hm->uri, mg_str("/fs/*"), NULL)) {
-//     mg_http_stream_body(c, hm, upload, NULL));
+//     mg_http_stream_body(c, hm, upload, NULL);
 //   }
 // Full example:
 //   tutorials/http/file-upload-single-post
 // Related APIs:
 //   mg_http_listen(), mg_http_next_multipart()
 // Notes:
-//   After it returns true, this function hijacks the connection. Existing event
+//   The existing event handler is no longer called. hm is invalid after this
-//   handler not called, hm is invalid, c->data and c->fn_data are modified
+//   call; c->data and c->fn_data are reserved for streaming state.
-bool mg_http_stream_body(struct mg_connection *c, struct mg_http_message *hm,
+void mg_http_stream_body(struct mg_connection *c, struct mg_http_message *hm,
                          bool (*upload_fn)(struct mg_http_message *,
                                            struct mg_str *, void **user_data),
                          void *user_data);
@@ -4227,12 +4171,14 @@ extern void mg_mqtt_poll(struct mg_mgr *);
 
 
 
+
 // Supported OTA targets
 #define MG_OTA_NONE 0               // No OTA support
 #define MG_OTA_STM32H5 1            // STM32 H5
 #define MG_OTA_STM32H7 2            // STM32 H7
 #define MG_OTA_STM32H7_DUAL_CORE 3  // STM32 H7 dual core
 #define MG_OTA_STM32F 4             // STM32 F7/F4/F2
+#define MG_OTA_STM32C5 5            // STM32 C5, same flash controller as H5
 #define MG_OTA_CH32V307 100         // WCH CH32V307
 #define MG_OTA_U2A 200              // Renesas U2A16, U2A8, U2A6
 #define MG_OTA_RT1020 300           // IMXRT1020
@@ -4242,6 +4188,7 @@ extern void mg_mqtt_poll(struct mg_mgr *);
 #define MG_OTA_RT1170 304           // IMXRT1170
 #define MG_OTA_RT1180 305           // IMXRT1180
 #define MG_OTA_MCXN 310             // MCXN947
+#define MG_OTA_MCXW71 311           // MCXW71
 #define MG_OTA_RW612 320            // FRDM-RW612
 #define MG_OTA_FLASH 900            // OTA via internal flash
 #define MG_OTA_ESP32 910            // ESP32 OTA implementation
@@ -4271,6 +4218,18 @@ bool mg_ota_write(const void *buf, size_t len);
 // Ends the OTA process and commits the written firmware.
 bool mg_ota_end(void);
 
+// Push-based OTA: mg_http_stream_body() callback that flashes the request
+//
+// ```c
+// if (ev == MG_EV_HTTP_HDRS) {
+//   struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+//   if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+//     mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+//   }
+// }
+// ```
+bool mg_http_ota_cb(struct mg_http_message *hm, struct mg_str *data, void **p);
+
 // MG_OTA_ROLLBACK: swap firmware banks and reset. On flash-based OTA, the
 // default calls swap_fn() (no-op on single-bank) then resets. Override in
 // mongoose_config.h for platforms without mg_flash (ESP32, PicoSDK, etc.).
@@ -4414,32 +4373,15 @@ void mg_ota_poll(struct mg_mgr *);
 
 
 
-// Memory usage in bytes. Override in mongoose_config.h for the target.
-#ifndef MG_HEALTH_STACK_USED
-#define MG_HEALTH_STACK_USED 0
-#endif
-
-#ifndef MG_HEALTH_STACK_TOTAL
-#define MG_HEALTH_STACK_TOTAL 0
-#endif
-
-#ifndef MG_HEALTH_HEAP_USED
-#define MG_HEALTH_HEAP_USED 0
-#endif
-
-#ifndef MG_HEALTH_HEAP_TOTAL
-#define MG_HEALTH_HEAP_TOTAL 0
-#endif
-
 #ifndef MG_HEALTH_MAGIC
 #define MG_HEALTH_MAGIC {'M', 'G', 'H', '3'}  // '3' is the layout version
 #endif
 
-#if !defined(MG_HEALTH_RAM) && (defined(STM32H7_DEV_ID) || defined(STM32H5))
+#if !defined(MG_HEALTH_RAM) && (defined(STM32H7_DEV_ID) || defined(STM32H5) || defined(STM32C5))
 #define MG_HEALTH_RAM __attribute__((section(".mg_health")))
 #endif
 
-#if !defined(MG_HEALTH_DATA_SIZE) && (defined(STM32H7_DEV_ID) || defined(STM32H5))
+#if !defined(MG_HEALTH_DATA_SIZE) && (defined(STM32H7_DEV_ID) || defined(STM32H5) || defined(STM32C5))
 #define MG_HEALTH_DATA_SIZE 250
 #endif
 
@@ -4806,6 +4748,41 @@ extern struct mg_tcpip_driver mg_tcpip_driver_nxp_wifi;
 extern struct mg_tcpip_driver mg_tcpip_driver_st67w6;
 extern struct mg_tcpip_driver mg_tcpip_driver_atcmd;
 extern struct mg_tcpip_driver mg_tcpip_driver_netc;
+extern struct mg_tcpip_driver mg_tcpip_driver_mcxw71;
+extern struct mg_tcpip_driver mg_tcpip_driver_rw612_154;
+
+// IEEE 802.15.4 radio channel and PAN ID. Settable in mongoose_config.h
+#ifndef MG_L2_802154_CHANNEL
+#define MG_L2_802154_CHANNEL 15  // 11..26
+#endif
+#ifndef MG_L2_802154_PAN_ID
+#define MG_L2_802154_PAN_ID 0xabcd
+#endif
+
+// driver_data for IEEE 802.15.4 radio drivers. The interface is Ethernet:
+// each Ethernet frame is split into broadcast radio frames, and reassembled
+// on the other side, see mg_l2_802154_tx() and mg_l2_802154_rx()
+struct mg_l2_802154_data {
+  uint8_t channel;        // User-set channel, 11..26
+  uint16_t pan_id;        // User-set PAN ID
+  uint8_t seq, tag;       // MAC sequence number, tag of the last sent frame
+  uint8_t rxtag, rxnext;  // Frame being reassembled: tag, next fragment
+  uint8_t rxsrc[8];       // Its sender
+  uint16_t rxlen;         // Its bytes received so far
+  uint8_t rxbuf[1514];    // Reassembly buffer, one Ethernet frame
+};
+
+// Splits an Ethernet frame into radio frames, sends each by calling send().
+// Called by radio drivers' tx(). Return len, or 0 on error
+size_t mg_l2_802154_tx(struct mg_tcpip_if *ifp, const void *buf, size_t len,
+                       size_t (*send)(const uint8_t *, size_t,
+                                      struct mg_tcpip_if *));
+
+// Adds a received radio frame f of n bytes to the frame being reassembled.
+// Called by radio drivers' rx(). Return the Ethernet frame length, copied to
+// buf, when it is complete, otherwise 0
+size_t mg_l2_802154_rx(struct mg_tcpip_if *ifp, const uint8_t *f, size_t n,
+                       void *buf, size_t len);
 
 // SPI bus abstraction for SPI-attached network chips (e.g. W5500).
 // Populate and assign to the driver's driver_data field.
@@ -5193,6 +5170,31 @@ struct mg_tcpip_driver_imxrt_data {
 #endif
 
 
+#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_MCXW71) && \
+    MG_ENABLE_DRIVER_MCXW71
+
+// NXP MCXW71 IEEE 802.15.4 radio, ZLL link layer, as an Ethernet interface:
+// Ethernet frames are split into radio frames, see mg_l2_802154_tx().
+// The transceiver (XCVR) must be set up for 802.15.4 before mg_tcpip_init(),
+// see hal_radio_init() in the FRDM-MCXW71 tutorial.
+// driver_data: struct mg_l2_802154_data, channel and PAN ID set
+
+#define MG_TCPIP_DRIVER_INIT(mgr)                                    \
+  do {                                                               \
+    static struct mg_l2_802154_data driver_data_;                  \
+    static struct mg_tcpip_if mif_;                                  \
+    driver_data_.channel = MG_L2_802154_CHANNEL;                   \
+    driver_data_.pan_id = MG_L2_802154_PAN_ID;                     \
+    mif_.driver = &mg_tcpip_driver_mcxw71;                           \
+    mif_.driver_data = &driver_data_;                                \
+    MG_SET_MAC_ADDRESS(mif_.mac);                                    \
+    mg_tcpip_init(mgr, &mif_);                                       \
+    MG_INFO(("Driver: mcxw71, channel %d", MG_L2_802154_CHANNEL)); \
+  } while (0)
+
+#endif
+
+
 #if defined(MG_ENABLE_TCPIP) && MG_ENABLE_TCPIP && \
     defined(MG_ENABLE_DRIVER_NETC) && MG_ENABLE_DRIVER_NETC
 
@@ -5411,6 +5413,35 @@ struct mg_tcpip_driver_rw612_data {
 #endif
 
 
+#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_RW612_154) && \
+    MG_ENABLE_DRIVER_RW612_154
+
+// NXP RW612 IEEE 802.15.4 radio, as an Ethernet interface: Ethernet frames
+// are split into radio frames, see mg_l2_802154_tx(). The radio runs on
+// CPU2: NXP BLE/802.15.4 combo firmware, an OpenThread radio co-processor
+// (RCP). The firmware must be loaded and running before mg_tcpip_init(), see
+// the FRDM-RW612 eth_radio_bridge tutorial. The driver talks to it over the
+// CPU2 <-> CPU3 IMU mailbox: IMUMC messages carrying HDLC framed Spinel.
+// driver_data: struct mg_l2_802154_data, channel and PAN ID set
+
+#ifndef MG_TCPIP_DRIVER_INIT
+#define MG_TCPIP_DRIVER_INIT(mgr)                                       \
+  do {                                                                  \
+    static struct mg_l2_802154_data driver_data_;                     \
+    static struct mg_tcpip_if mif_;                                     \
+    driver_data_.channel = MG_L2_802154_CHANNEL;                      \
+    driver_data_.pan_id = MG_L2_802154_PAN_ID;                        \
+    mif_.driver = &mg_tcpip_driver_rw612_154;                           \
+    mif_.driver_data = &driver_data_;                                   \
+    MG_SET_MAC_ADDRESS(mif_.mac);                                       \
+    mg_tcpip_init(mgr, &mif_);                                          \
+    MG_INFO(("Driver: rw612_154, channel %d", MG_L2_802154_CHANNEL)); \
+  } while (0)
+#endif
+
+#endif
+
+
 #if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_SAME54) && \
     MG_ENABLE_DRIVER_SAME54
 
@@ -5572,6 +5603,13 @@ struct mg_tcpip_driver_stm32f_data {
 #if !defined(MG_ENABLE_DRIVER_STM32H)
 #define MG_ENABLE_DRIVER_STM32H 0
 #endif
+#if !defined(MG_ENABLE_DRIVER_STM32C)
+#define MG_ENABLE_DRIVER_STM32C 0
+#endif
+#if MG_ENABLE_DRIVER_STM32C  // STM32C5: STM32H5 MAC, the IRQ is ETH1
+#undef MG_ENABLE_DRIVER_STM32H
+#define MG_ENABLE_DRIVER_STM32H 1
+#endif
 #if !defined(MG_ENABLE_DRIVER_MCXN)
 #define MG_ENABLE_DRIVER_MCXN 0
 #endif
@@ -5611,9 +5649,11 @@ struct mg_tcpip_driver_stm32h_data {
 #define MG_DRIVER_MDC_CR 4
 #endif
 
-#if MG_ENABLE_DRIVER_STM32H && MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
+#if MG_ENABLE_DRIVER_STM32H && !MG_ENABLE_DRIVER_STM32C && \
+    MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
 #define MG_ENABLE_ETH_IRQ() NVIC_EnableIRQ(ETH_IRQn)
-#elif MG_ENABLE_DRIVER_STM32N && MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
+#elif (MG_ENABLE_DRIVER_STM32N || MG_ENABLE_DRIVER_STM32C) && \
+    MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
 #define MG_ENABLE_ETH_IRQ() NVIC_EnableIRQ(ETH1_IRQn)
 #elif !defined(MG_ENABLE_ETH_IRQ)
 #define MG_ENABLE_ETH_IRQ()

resources/I-CUBE-Mongoose/Cesanta.I-CUBE-Mongoose.pdsc

@@ -15,6 +15,7 @@
     </environment>
   </environments>
   <releases>
+    <release date="2026-10-21" version="7.23.3">See https://github.com/cesanta/mongoose/releases/tag/7.23</release>
     <release date="2026-10-19" version="7.23.2">See https://github.com/cesanta/mongoose/releases/tag/7.23</release>
     <release date="2026-09-28" version="7.23.1">See https://github.com/cesanta/mongoose/releases/tag/7.23</release>
     <release date="2026-05-11" version="7.21.7">See https://github.com/cesanta/mongoose/releases/tag/7.21</release>
@@ -28,7 +29,7 @@
       <keyword>IMPLEMENTED_WITH_STM32CUBEMX</keyword>
   </keywords>
   <components>
-    <component Cclass="Mongoose" Cgroup="Networking Core" Cversion="7.23.2" maxInstances="1">
+    <component Cclass="Mongoose" Cgroup="Networking Core" Cversion="7.23.3" maxInstances="1">
       <description>Networking Core</description>
       <files>
         <file category="doc" name="README.md"/>

resources/I-CUBE-Mongoose/Makefile

@@ -1,4 +1,4 @@
-VERSION = 7.23.2
+VERSION = 7.23.3
 REPO_ROOT = ../..
 MX ?= /Applications/STMicroelectronics/STM32CubeMX.app/Contents/MacOs/STM32CubeMX
 FILES = Cesanta.I-CUBE-Mongoose.pdsc Release_Notes.html mongoose_config.h README.md .config/mongoose_parameters.json

src/arch_cube.h

@@ -32,6 +32,7 @@
 
 #if MG_ENABLE_TCPIP && !defined(MG_ENABLE_DRIVER_STM32F) && \
     !defined(MG_ENABLE_DRIVER_STM32H) && !defined(MG_ENABLE_DRIVER_STM32N) && \
+    !defined(MG_ENABLE_DRIVER_STM32C) && \
     !defined(MG_ENABLE_DRIVER_CYW) && !defined(MG_ENABLE_DRIVER_CYW_SDIO) && \
     !defined(MG_ENABLE_DRIVER_ST67W6)
 #if defined(STM32F1) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7)
@@ -40,6 +41,8 @@
 #define MG_ENABLE_DRIVER_STM32H 1
 #elif defined(STM32N6)
 #define MG_ENABLE_DRIVER_STM32N 1
+#elif defined(STM32C5)
+#define MG_ENABLE_DRIVER_STM32C 1
 #else
 #error Select a driver in mongoose_config.h
 #endif
@@ -56,70 +59,8 @@
 #define MG_OTA MG_OTA_STM32H5
 #elif !defined(MG_OTA) && defined(STM32H7)
 #define MG_OTA MG_OTA_STM32H7
-#endif
+#elif !defined(MG_OTA) && defined(STM32C5)
-
+#define MG_OTA MG_OTA_STM32C5
-// OTA rollback timer via IWDG. Fixed 10 s hang-detection window (prescaler
-// /1024, LSI ~32 kHz: reload = 10 * 32000 / 1024 = 312). mg_ota_poll() feeds
-// the watchdog every 500 ms while in MG_OTA_TESTING state; if the event loop
-// hangs for 10 s, the IWDG fires and the device rolls back.
-// STM32H7 names the peripheral IWDG1; all others use IWDG.
-// The total evaluation period is set by MG_OTA_ROLLBACK_TIMEOUT_SECONDS.
-// STM32H7 names the watchdog peripheral IWDG1; all other families use IWDG.
-#if defined(IWDG1) && !defined(IWDG)
-#define MG_IWDG IWDG1
-#else
-#define MG_IWDG IWDG
-#endif
-// PR=6 → /256 prescaler, RLR=1250 → ~10 s at LSI 32 kHz.
-// Works on F4/F7/H5/H7; uses direct register writes so it is safe before HAL_Init().
-#ifndef MG_OTA_ROLLBACK_TIMER_START
-#define MG_OTA_ROLLBACK_TIMER_START()                                          \
-  do {                                                                         \
-    MG_IWDG->KR = 0xCCCCU;                              /* start + LSI  */    \
-    MG_IWDG->KR = 0x5555U;                              /* unlock PR/RLR */   \
-    MG_IWDG->PR = 6U;                                   /* /256         */    \
-    MG_IWDG->RLR = 1250U;                               /* 10 s         */    \
-    while (MG_IWDG->SR & (IWDG_SR_PVU | IWDG_SR_RVU)) (void) 0;              \
-    MG_IWDG->KR = 0xAAAAU;                              /* reload       */    \
-  } while (0)
-#endif
-
-// Feed (reload) the IWDG. Called from mg_ota_poll() every 500 ms.
-#ifndef MG_OTA_ROLLBACK_TIMER_FEED
-#define MG_OTA_ROLLBACK_TIMER_FEED() (MG_IWDG->KR = 0xAAAAU)
-#endif
-
-// OTA state in a backup register that survives warm resets but clears on POR.
-// STATE_GET reads work without any setup. STATE_SET enables the RTC APB clock
-// and unlocks backup domain write access via direct register writes, so it is
-// safe to call from any context (before or after HAL_Init).
-// H5 (TAMP->BKP0R), H7 (RTC->BKP0R), F4/F7 (RTC->BKP0R).
-#ifndef MG_OTA_STATE_GET
-#if defined(PWR_DBPCR_DBP)
-#define MG_OTA_DBP_ENABLE() (PWR->DBPCR |= PWR_DBPCR_DBP)
-#elif defined(PWR_CR1_DBP)
-#define MG_OTA_DBP_ENABLE() (PWR->CR1 |= PWR_CR1_DBP)
-#else
-#define MG_OTA_DBP_ENABLE() (PWR->CR |= PWR_CR_DBP)
-#endif
-
-#if defined(TAMP)
-#define MG_OTA_STATE_GET()                                           \
-  (RCC->APB3ENR |= RCC_APB3ENR_RTCAPBEN, TAMP->BKP0R)
-#define MG_OTA_STATE_SET(v)                                           \
-  (RCC->APB3ENR |= RCC_APB3ENR_RTCAPBEN, MG_OTA_DBP_ENABLE(),        \
-   (TAMP->BKP0R = (uint32_t) (v)), TAMP->BKP0R)
-#elif defined(RCC_APB4ENR_RTCAPBEN)
-#define MG_OTA_STATE_GET() (RTC->BKP0R)
-#define MG_OTA_STATE_SET(v)                                           \
-  (RCC->APB4ENR |= RCC_APB4ENR_RTCAPBEN, MG_OTA_DBP_ENABLE(),        \
-   (RTC->BKP0R = (uint32_t) (v)))
-#else
-#define MG_OTA_STATE_GET() (RTC->BKP0R)
-#define MG_OTA_STATE_SET(v)                                           \
-  (RCC->APB1ENR |= RCC_APB1ENR_PWREN, MG_OTA_DBP_ENABLE(),           \
-   (RTC->BKP0R = (uint32_t) (v)))
-#endif
 #endif
 
 // use HAL-defined execute-in-ram section

src/dash.c

@@ -533,21 +533,6 @@ static void mg_dash_handle_add(struct mg_connection *c, struct mg_dash *dash,
   }
 }
 
-// Firmware upload callback for mg_http_stream_body(). Uses *p as a flag:
-// non-NULL means an OTA session is open and must be closed by mg_ota_end()
-static bool otacb(struct mg_http_message *hm, struct mg_str *data, void **p) {
-  if (hm != NULL) {  // Start
-    if (!mg_ota_begin(hm->body.len)) return false;
-    *p = (void *) (ptrdiff_t) 1;
-    return true;
-  } else if (data != NULL) {  // Next chunk
-    return mg_ota_write(data->buf, data->len);
-  }
-  if (*p == NULL) return false;  // End. Begin failed, nothing to finish
-  *p = NULL;
-  return mg_ota_end();
-}
-
 static void mg_serve_fs(struct mg_connection *c, struct mg_http_message *hm,
                         struct mg_dash_user *u, bool stream) {
   struct mg_dash *dash = (struct mg_dash *) c->fn_data;
@@ -594,9 +579,9 @@ void mg_dash_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
       mg_serve_fs(c, hm, u, true);
       return;  // Important - the serve_fs() call can invalidate hm
     } else if (mg_match(hm->uri, mg_str("/api/ota"), NULL)) {
-      // Authenticated above. If streaming started, the stream handler owns
+      // Authenticated above. Streaming owns the connection and c->data.
-      // the connection and c->data, so skip the marker check below
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
-      if (mg_http_stream_body(c, hm, otacb, NULL)) return;
+      return;
     }
     if (d->marker != '\0') mg_log_http_req(c, hm);
   } else if (ev == MG_EV_HTTP_MSG && d->marker != '\0') {

src/drivers/mcxw71.c

@@ -0,0 +1,142 @@
+#include "net_builtin.h"
+
+#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_MCXW71) && \
+    MG_ENABLE_DRIVER_MCXW71
+
+// ZLL, 802.15.4 link layer. See MCXW71 reference manual and NXP
+// ieee_802_15_4 PHY sources: PhyPacketProcessor.c, PhyPlmeData.c, PhyISR.c
+struct mg_zll {
+  volatile uint32_t IRQSTS, PHY_CTRL, EVENT_TMR, TIMESTAMP, T1CMP, T2CMP,
+      T2PRIMECMP, T3CMP, T4CMP, PA_PWR, CHANNEL_NUM0, LQI_AND_RSSI,
+      MACSHORTADDRS0, MACLONGADDRS0_LSB, MACLONGADDRS0_MSB, RX_FRAME_FILTER,
+      CCA_LQI_CTRL, CCA2_CTRL, RESERVED_0, DSM_CTRL, RESERVED_1,
+      MACSHORTADDRS1, MACLONGADDRS1_LSB, MACLONGADDRS1_MSB, DUAL_PAN_CTRL,
+      CHANNEL_NUM1, SAM_CTRL, SAM_TABLE, SAM_MATCH, SAM_FREE_IDX,
+      SEQ_CTRL_STS, ACKDELAY, FILTERFAIL_CODE, RX_WTR_MARK, RESERVED_2,
+      SLOT_PRELOAD, SEQ_STATE, TMR_PRESCALE, LENIENCY_LSB, LENIENCY_MSB,
+      PART_ID, COEX_CTRL, COEX_PRIORITY, ENHACK_CTRL0;
+};
+
+// TrustZone: code built for the secure state (-mcmse) uses the secure alias
+// of the radio registers, 0x5xxxxxxx. Otherwise, the non-secure alias
+#if defined(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE & 2)
+#define MGI_ZLL ((struct mg_zll *) 0x58A01000)
+#define MGI_PKT_RAM ((volatile uint8_t *) 0x58A08000)
+#else
+#define MGI_ZLL ((struct mg_zll *) 0x48A01000)
+#define MGI_PKT_RAM ((volatile uint8_t *) 0x48A08000)
+#endif
+
+#define MGI_TX_PB MGI_PKT_RAM           // Length byte (incl. FCS), then frame
+#define MGI_RX_PB (MGI_PKT_RAM + 0x80)  // Received frame, no length byte
+
+#define MGI_IRQSTS_SEQIRQ MG_BIT(0)
+#define MGI_IRQSTS_RXIRQ MG_BIT(2)
+#define MGI_IRQSTS_RX_LEN(x) (((x) >> 24) & 0x7f)  // Frame length incl. FCS
+#define MGI_PHY_CTRL_XCVSEQ 7U
+#define MGI_PHY_CTRL_ALL_IRQ_MASKS 0x8007ff00U  // Bits 8..18, 31: mask all IRQs
+#define MGI_SEQ_STATE_MASK 0x1fU
+#define MGI_SEQ_STATE_RX_WU 0x10U         // RX warm up
+#define MGI_SEQ_CTRL_NO_RX_RECYCLE MG_BIT(5)
+#define MGI_FRAME_FILTER 0x70bU  // Beacon, data, command; versions 0..2
+
+enum { MGI_SEQ_IDLE = 0, MGI_SEQ_RX = 1, MGI_SEQ_TX = 2 };  // PHY_CTRL[XCVSEQ]
+#define MGI_TX_TIMEOUT 400U  // Symbols, 16 us: 127 bytes
+
+// Symbol timer, 16 us, 24 bits
+static uint32_t mg_mcxw71_symbols(void) {
+  return MGI_ZLL->EVENT_TMR >> 8;
+}
+
+// Wait for the sequence to end, up to MGI_TX_TIMEOUT symbols
+static bool mg_mcxw71_wait(void) {
+  uint32_t start = mg_mcxw71_symbols();
+  while (((mg_mcxw71_symbols() - start) & 0xffffffU) < MGI_TX_TIMEOUT) {
+    if (MGI_ZLL->IRQSTS & MGI_IRQSTS_SEQIRQ) return true;
+  }
+  return false;
+}
+
+// Stop the current sequence, wait for the sequencer to go idle. See PhyAbort()
+static void mg_mcxw71_idle(void) {
+  if (MGI_ZLL->PHY_CTRL & MGI_PHY_CTRL_XCVSEQ) {
+    while ((MGI_ZLL->SEQ_STATE & MGI_SEQ_STATE_MASK) == MGI_SEQ_STATE_RX_WU)
+      (void) 0;
+    MGI_ZLL->PHY_CTRL &= ~MGI_PHY_CTRL_XCVSEQ;
+    while (MGI_ZLL->SEQ_STATE & MGI_SEQ_STATE_MASK) (void) 0;
+  }
+  MGI_ZLL->IRQSTS = MGI_ZLL->IRQSTS;  // Clear all flags, write 1 to clear
+}
+
+// Start a new sequence: MGI_SEQ_RX or MGI_SEQ_TX
+static void mg_mcxw71_start(uint32_t seq) {
+  MGI_ZLL->IRQSTS = MGI_ZLL->IRQSTS;
+  MGI_ZLL->PHY_CTRL |= seq;
+}
+
+static bool mg_mcxw71_init(struct mg_tcpip_if *ifp) {
+  struct mg_l2_802154_data *d =
+      (struct mg_l2_802154_data *) ifp->driver_data;
+  if (d == NULL || d->channel < 11 || d->channel > 26) {
+    MG_ERROR(("Set driver_data, channel 11..26"));
+    return false;
+  }
+  MGI_ZLL->SEQ_CTRL_STS |= MGI_SEQ_CTRL_NO_RX_RECYCLE;
+  MGI_ZLL->PHY_CTRL = MGI_PHY_CTRL_ALL_IRQ_MASKS;  // Mask all IRQs, we poll
+  MGI_ZLL->IRQSTS = MGI_ZLL->IRQSTS;
+  MGI_ZLL->SAM_CTRL = 0;
+  MGI_ZLL->RX_FRAME_FILTER = MGI_FRAME_FILTER;
+  MGI_ZLL->TMR_PRESCALE = 5;  // 16 us timebase, one symbol
+  MGI_ZLL->CHANNEL_NUM0 = d->channel;
+  MGI_ZLL->MACSHORTADDRS0 = (0xfffeU << 16) | d->pan_id;  // Filter by PAN ID
+  MGI_ZLL->PA_PWR = 0x3f;  // PA slices, max output power
+  mg_mcxw71_start(MGI_SEQ_RX);
+  return true;
+}
+
+// Send one radio frame: MAC header and payload, no FCS
+static size_t mg_mcxw71_send(const uint8_t *p, size_t len,
+                             struct mg_tcpip_if *ifp) {
+  size_t i;
+  bool ok;
+  mg_mcxw71_idle();
+  MGI_TX_PB[0] = (uint8_t) (len + 2);  // FCS is added by hardware
+  for (i = 0; i < len; i++) MGI_TX_PB[i + 1] = p[i];  // 8-bit access only
+  mg_mcxw71_start(MGI_SEQ_TX);
+  ok = mg_mcxw71_wait();
+  mg_mcxw71_idle();
+  mg_mcxw71_start(MGI_SEQ_RX);
+  (void) ifp;
+  return ok ? len : 0;
+}
+
+static size_t mg_mcxw71_tx(const void *buf, size_t len,
+                           struct mg_tcpip_if *ifp) {
+  return mg_l2_802154_tx(ifp, buf, len, mg_mcxw71_send);
+}
+
+static size_t mg_mcxw71_rx(void *buf, size_t len, struct mg_tcpip_if *ifp) {
+  uint32_t irqsts = MGI_ZLL->IRQSTS;
+  uint8_t f[125];
+  size_t i, n = 0;
+  if ((irqsts & MGI_IRQSTS_SEQIRQ) == 0) return 0;  // Still receiving
+  if (irqsts & MGI_IRQSTS_RXIRQ) {
+    n = MGI_IRQSTS_RX_LEN(irqsts);
+    n = n >= 2 ? n - 2 : 0;  // Strip FCS
+    if (n > sizeof(f)) n = sizeof(f);
+    for (i = 0; i < n; i++) f[i] = MGI_RX_PB[i];
+  }
+  mg_mcxw71_idle();
+  mg_mcxw71_start(MGI_SEQ_RX);
+  return mg_l2_802154_rx(ifp, f, n, buf, len);
+}
+
+static bool mg_mcxw71_poll(struct mg_tcpip_if *ifp, bool s1) {
+  (void) ifp, (void) s1;
+  return true;  // Radio link is always up
+}
+
+struct mg_tcpip_driver mg_tcpip_driver_mcxw71 = {mg_mcxw71_init, mg_mcxw71_tx,
+                                                 mg_mcxw71_rx, mg_mcxw71_poll};
+
+#endif

src/drivers/mcxw71.h

@@ -0,0 +1,25 @@
+#pragma once
+
+#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_MCXW71) && \
+    MG_ENABLE_DRIVER_MCXW71
+
+// NXP MCXW71 IEEE 802.15.4 radio, ZLL link layer, as an Ethernet interface:
+// Ethernet frames are split into radio frames, see mg_l2_802154_tx().
+// The transceiver (XCVR) must be set up for 802.15.4 before mg_tcpip_init(),
+// see hal_radio_init() in the FRDM-MCXW71 tutorial.
+// driver_data: struct mg_l2_802154_data, channel and PAN ID set
+
+#define MG_TCPIP_DRIVER_INIT(mgr)                                    \
+  do {                                                               \
+    static struct mg_l2_802154_data driver_data_;                  \
+    static struct mg_tcpip_if mif_;                                  \
+    driver_data_.channel = MG_L2_802154_CHANNEL;                   \
+    driver_data_.pan_id = MG_L2_802154_PAN_ID;                     \
+    mif_.driver = &mg_tcpip_driver_mcxw71;                           \
+    mif_.driver_data = &driver_data_;                                \
+    MG_SET_MAC_ADDRESS(mif_.mac);                                    \
+    mg_tcpip_init(mgr, &mif_);                                       \
+    MG_INFO(("Driver: mcxw71, channel %d", MG_L2_802154_CHANNEL)); \
+  } while (0)
+
+#endif

src/drivers/rw612_154.c

@@ -0,0 +1,450 @@
+#include "net_builtin.h"
+
+#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_RW612_154) && \
+    MG_ENABLE_DRIVER_RW612_154
+
+// The 802.15.4 radio runs NXP combo firmware on CPU2, an OpenThread RCP. We
+// are CPU3. Messages go through the IMU mailbox: IMU messages carry IMUMC
+// messages, IMUMC messages carry HDLC framed Spinel. See NXP sources:
+// mcuxsdk-core drivers/imu/fsl_imu.c, mcux-component
+// imu_adapter/fsl_adapter_imu.c, connectivity framework
+// platform/rw61x/fwk_platform_hdlc.c; OpenThread src/lib/spinel/spinel.h
+
+// IMU message FIFO registers, one block per direction. See fsl_imu.h
+struct mg_rw612_imu {
+  volatile uint32_t WR_MSG, RD_MSG, STATUS, CNTL, RD_MSG_DBG;
+};
+#define MGI_IMU ((struct mg_rw612_imu *) 0x443ff804)       // CPU3 -> CPU2
+#define MGI_IMU_PEER ((struct mg_rw612_imu *) 0x443ff818)  // CPU2 -> CPU3
+#define MGI_IMU_LOCKED MG_BIT(0)          // STATUS: FIFO locked
+#define MGI_IMU_ALMOST_FULL MG_BIT(1)     // STATUS: FIFO almost full
+#define MGI_IMU_EMPTY MG_BIT(3)           // STATUS: FIFO empty
+#define MGI_IMU_WR_PTR(s) (((s) >> 16) & 15U)
+#define MGI_IMU_INT_CLR MG_BIT(0)         // CNTL: clear message ready IRQ
+#define MGI_IMU_FLUSH MG_BIT(16)          // CNTL: flush send FIFO
+#define MGI_IMU_WAIT_FOR_ACK MG_BIT(17)   // CNTL: lock send FIFO
+#define MGI_IMU_WATERMARK(x) ((uint32_t) (x) << 20)
+#define MGI_IMU_WATERMARK_MASK (15U << 20)
+
+// IMU message: header, then payload words. See IMU_Msg_t
+struct mg_rw612_msg {
+  uint8_t type, subtype, seq, len;  // len: number of payload words
+  uint32_t payload[8];
+};
+
+// Mailbox in SMU2 shared memory, at the address CPU2 firmware expects
+struct mg_rw612_mbox {
+  uint32_t magic[2];             // Sync pattern: [0] CPU2, [1] us
+  struct mg_rw612_msg q[2][16];  // Message slots: [0] CPU2 -> us, [1] ours
+};
+#define MGI_MBOX ((volatile struct mg_rw612_mbox *) 0x443c0000)
+#define MGI_TXBUF 0x443c1508U  // Our IMUMC buffers: 16 x 264 bytes
+#define MGI_TXBUF_CNT 16
+#define MGI_TXBUF_LEN 264U
+#define MGI_SLEEP_FLAG (*(volatile uint32_t *) 0x443c2588)
+#define MGI_SYNC_MAGIC 0xabcdef89U
+
+// IMUMC message, carried in IMU payload words. See imumc_std_msg
+struct mg_rw612_imumc {
+  uint32_t src, dst;  // Endpoint addresses
+  uint16_t rfu, idx;  // Reserved
+  uint16_t len;       // Payload length, bytes
+  uint16_t flags;     // Message flags
+  uint32_t data;      // Payload buffer address
+};
+#define MGI_EPT_LOCAL 10   // Our 802.15.4 endpoint
+#define MGI_EPT_REMOTE 20  // Firmware 802.15.4 endpoint
+
+enum { MGI_MSG_CONTROL = 0, MGI_MSG_IMUMC = 8 };  // IMU message types
+enum {                                            // Control message subtypes
+  MGI_CTL_SYNC = 1,
+  MGI_CTL_SYNC_ACK = 2,
+  MGI_CTL_ACK_FOR_UNLOCK = 3,
+  MGI_CTL_CMD_BUF_ADDR = 6,
+  MGI_CTL_EPT_QUERY = 11,
+  MGI_CTL_EPT_QUERY_RSP = 12,
+  MGI_CTL_BUF_FREE = 13
+};
+
+// Spinel commands, properties and statuses we use
+enum { MGI_CMD_RESET = 1, MGI_CMD_GET = 2, MGI_CMD_SET = 3, MGI_CMD_IS = 6 };
+enum {
+  MGI_PROP_LAST_STATUS = 0,
+  MGI_PROP_NCP_VERSION = 2,
+  MGI_PROP_PHY_ENABLED = 0x20,
+  MGI_PROP_PHY_CHAN = 0x21,
+  MGI_PROP_PANID = 0x36,
+  MGI_PROP_RAW_STREAM = 0x37,
+  MGI_PROP_STREAM_RAW = 0x71
+};
+#define MGI_RESET_STACK 2         // RESET argument: reset the RCP stack only
+#define MGI_STATUS_RESET_MIN 112  // LAST_STATUS: RCP has reset
+#define MGI_STATUS_RESET_MAX 127
+#define MGI_TX_TIMEOUT_MS 200  // Wait for transmit done, incl. retries
+#define MGI_RSP_TIMEOUT_MS 500
+#define MGI_RXQ_CNT 16  // A whole Ethernet frame, 15 radio frames
+
+// Driver state, one radio
+struct mg_rw612 {
+  bool up;                  // IMU link synchronised
+  bool ept_ready;           // IMUMC endpoints connected
+  bool reset;               // RCP reported a reset
+  uint8_t seq;              // IMU message sequence number
+  uint16_t free_bufs;       // Free IMUMC buffers, bit per buffer
+  uint8_t hdlc[300];        // HDLC frame being received, unescaped
+  size_t hlen;              // Bytes in hdlc
+  bool esc;                 // Previous byte was an escape
+  uint8_t tid;              // Spinel transaction ID of the pending request
+  bool rsp;                 // Response to the pending request received
+  uint32_t rsp_status;      // Its status, if LAST_STATUS, else 0
+  char version[64];         // RCP version string
+  uint8_t rxq[MGI_RXQ_CNT][127];  // Received frames, no FCS
+  uint8_t rxlen[MGI_RXQ_CNT];     // Their lengths
+  uint8_t rxhead, rxtail;         // Queue indexes
+};
+static struct mg_rw612 s_rw612;
+
+static void mg_rw612_imu_send(uint8_t type, uint8_t subtype,
+                              const uint32_t *payload, uint8_t len) {
+  volatile struct mg_rw612_msg *m;
+  uint64_t expire = mg_millis() + 100;
+  uint8_t i;
+  while ((MGI_IMU->STATUS & (MGI_IMU_ALMOST_FULL | MGI_IMU_LOCKED)) &&
+         mg_millis() < expire) {
+    (void) 0;
+  }
+  m = &MGI_MBOX->q[1][MGI_IMU_WR_PTR(MGI_IMU->STATUS)];
+  m->type = type, m->subtype = subtype, m->seq = s_rw612.seq++, m->len = len;
+  for (i = 0; i < len; i++) m->payload[i] = payload[i];
+  MGI_IMU->WR_MSG = (uint32_t) (uintptr_t) m;
+}
+
+static void mg_rw612_control(uint8_t subtype, uint32_t a, uint32_t b,
+                             uint8_t len) {
+  uint32_t payload[2] = {a, b};
+  mg_rw612_imu_send(MGI_MSG_CONTROL, subtype, payload, len);
+}
+
+static void mg_rw612_queue_rx(const uint8_t *frame, size_t len) {
+  struct mg_rw612 *s = &s_rw612;
+  uint8_t next = (uint8_t) ((s->rxhead + 1) % MGI_RXQ_CNT);
+  if (next == s->rxtail || len > sizeof(s->rxq[0])) return;  // Full: drop
+  memcpy(s->rxq[s->rxhead], frame, len);
+  s->rxlen[s->rxhead] = (uint8_t) len;
+  s->rxhead = next;
+}
+
+// Spinel packed unsigned integer: 7 bits per byte, LSB first
+static size_t mg_rw612_unpack(const uint8_t *p, size_t len, uint32_t *v) {
+  size_t i;
+  *v = 0;
+  for (i = 0; i < len && i < 4; i++) {
+    *v |= (uint32_t) (p[i] & 0x7f) << (7 * i);
+    if ((p[i] & 0x80) == 0) return i + 1;
+  }
+  return 0;
+}
+
+// Handle a received Spinel frame: header, command, property, value
+static void mg_rw612_spinel(const uint8_t *f, size_t len) {
+  struct mg_rw612 *s = &s_rw612;
+  uint32_t cmd, prop, status = 0;
+  size_t n, ofs = 1;
+  uint8_t tid = f[0] & 15;
+  if (len < 3 || (n = mg_rw612_unpack(f + ofs, len - ofs, &cmd)) == 0) return;
+  ofs += n;
+  if ((n = mg_rw612_unpack(f + ofs, len - ofs, &prop)) == 0) return;
+  ofs += n;
+  if (cmd != MGI_CMD_IS) return;
+  if (prop == MGI_PROP_STREAM_RAW && tid == 0 && len - ofs >= 2) {
+    size_t flen = (size_t) (f[ofs] | (f[ofs + 1] << 8));  // Incl. FCS
+    if (flen >= 2 && ofs + 2 + flen <= len) {
+      mg_rw612_queue_rx(f + ofs + 2, flen - 2);
+    }
+  } else if (prop == MGI_PROP_LAST_STATUS) {
+    mg_rw612_unpack(f + ofs, len - ofs, &status);
+    if (tid == 0 && status >= MGI_STATUS_RESET_MIN &&
+        status <= MGI_STATUS_RESET_MAX) {
+      s->reset = true;
+    }
+  } else if (prop == MGI_PROP_NCP_VERSION) {
+    n = len - ofs < sizeof(s->version) - 1 ? len - ofs : sizeof(s->version) - 1;
+    memcpy(s->version, f + ofs, n);
+    s->version[n] = '\0';
+  }
+  if (tid != 0 && tid == s->tid) s->rsp = true, s->rsp_status = status;
+}
+
+// HDLC-lite: 0x7e delimits frames, 0x7d escapes, FCS-16 at the end
+static uint16_t mg_rw612_fcs(uint16_t fcs, uint8_t c) {
+  int i;
+  fcs ^= c;
+  for (i = 0; i < 8; i++) fcs = (fcs & 1) ? (fcs >> 1) ^ 0x8408 : fcs >> 1;
+  return fcs;
+}
+
+static void mg_rw612_hdlc_rx(const uint8_t *p, size_t len) {
+  struct mg_rw612 *s = &s_rw612;
+  size_t i, j;
+  for (i = 0; i < len; i++) {
+    uint8_t c = p[i];
+    if (c == 0x7e) {
+      if (s->hlen >= 3) {
+        uint16_t fcs = 0xffff;
+        for (j = 0; j < s->hlen; j++) fcs = mg_rw612_fcs(fcs, s->hdlc[j]);
+        if (fcs == 0xf0b8) mg_rw612_spinel(s->hdlc, s->hlen - 2);
+      }
+      s->hlen = 0, s->esc = false;
+    } else if (c == 0x7d) {
+      s->esc = true;
+    } else if (s->hlen < sizeof(s->hdlc)) {
+      s->hdlc[s->hlen++] = s->esc ? c ^ 0x20 : c;
+      s->esc = false;
+    }
+  }
+}
+
+static void mg_rw612_control_rx(volatile struct mg_rw612_msg *m) {
+  struct mg_rw612 *s = &s_rw612;
+  switch (m->subtype) {
+    case MGI_CTL_ACK_FOR_UNLOCK:
+      MGI_IMU->CNTL &= ~MGI_IMU_WAIT_FOR_ACK;
+      break;
+    case MGI_CTL_SYNC:  // As HAL_ImuCtrlHandler(): acknowledge twice
+      mg_rw612_control(MGI_CTL_SYNC_ACK, 0, 0, 0);
+      mg_rw612_control(MGI_CTL_SYNC_ACK, 0, 0, 0);
+      s->up = true;
+      break;
+    case MGI_CTL_SYNC_ACK:
+    case MGI_CTL_CMD_BUF_ADDR:
+      s->up = true;
+      break;
+    case MGI_CTL_EPT_QUERY: {  // Firmware asks if our endpoint exists
+      bool ours = m->payload[0] == MGI_EPT_LOCAL;
+      mg_rw612_control(MGI_CTL_EPT_QUERY_RSP, m->payload[0], ours, 2);
+      if (ours) s->ept_ready = true;
+      break;
+    }
+    case MGI_CTL_EPT_QUERY_RSP:
+      if (m->payload[0] == MGI_EPT_REMOTE && m->payload[1] != 0) {
+        s->ept_ready = true;
+      }
+      break;
+    case MGI_CTL_BUF_FREE: {  // Firmware is done with one of our buffers
+      uint32_t i = (m->payload[0] - MGI_TXBUF) / MGI_TXBUF_LEN;
+      if (i < MGI_TXBUF_CNT) s->free_bufs |= (uint16_t) MG_BIT(i);
+      break;
+    }
+    default:
+      break;
+  }
+}
+
+// Process all received IMU messages. See HAL_ImuReceive()
+static void mg_rw612_poll_imu(void) {
+  bool unlock = false;
+  while ((MGI_IMU_PEER->STATUS & MGI_IMU_EMPTY) == 0) {
+    struct mg_rw612_msg m;
+    volatile struct mg_rw612_msg *p;
+    uint8_t i;
+    MGI_SLEEP_FLAG &= ~1U;
+    p = (volatile struct mg_rw612_msg *) (uintptr_t) MGI_IMU->RD_MSG;
+    if (MGI_IMU_PEER->STATUS & MGI_IMU_LOCKED) unlock = true;
+    if (p == NULL) continue;
+    m.type = p->type, m.subtype = p->subtype, m.len = p->len;
+    for (i = 0; i < 8; i++) m.payload[i] = p->payload[i];
+    if (m.type == MGI_MSG_CONTROL) {
+      mg_rw612_control_rx(&m);
+    } else if (m.type == MGI_MSG_IMUMC) {
+      struct mg_rw612_imumc im;
+      memcpy(&im, m.payload, sizeof(im));
+      if (im.dst == MGI_EPT_LOCAL) {
+        mg_rw612_hdlc_rx((const uint8_t *) (uintptr_t) im.data, im.len);
+      }
+      mg_rw612_control(MGI_CTL_BUF_FREE, im.data, 0, 1);
+    }
+  }
+  MGI_IMU->CNTL |= MGI_IMU_INT_CLR;
+  MGI_SLEEP_FLAG |= 1U;
+  if (unlock) mg_rw612_control(MGI_CTL_ACK_FOR_UNLOCK, 0, 0, 0);
+}
+
+// Send bytes to the firmware endpoint, in IMUMC buffer sized chunks
+static bool mg_rw612_imumc_send(const uint8_t *p, size_t len) {
+  struct mg_rw612 *s = &s_rw612;
+  while (len > 0) {
+    size_t n = len < MGI_TXBUF_LEN ? len : MGI_TXBUF_LEN;
+    uint64_t expire = mg_millis() + 100;
+    struct mg_rw612_imumc im;
+    uint32_t i;
+    while (s->free_bufs == 0) {
+      mg_rw612_poll_imu();
+      if (mg_millis() > expire) return false;
+    }
+    for (i = 0; (s->free_bufs & MG_BIT(i)) == 0; i++) (void) 0;
+    s->free_bufs &= (uint16_t) ~MG_BIT(i);
+    memset(&im, 0, sizeof(im));
+    im.src = MGI_EPT_LOCAL, im.dst = MGI_EPT_REMOTE, im.len = (uint16_t) n;
+    im.data = MGI_TXBUF + i * MGI_TXBUF_LEN;
+    memcpy((void *) (uintptr_t) im.data, p, n);
+    mg_rw612_imu_send(MGI_MSG_IMUMC, 0, (uint32_t *) &im, sizeof(im) / 4);
+    p += n, len -= n;
+  }
+  return true;
+}
+
+// Send a Spinel frame, HDLC encoded, and wait for the response with the
+// same transaction ID. Return false on timeout
+static bool mg_rw612_request(uint8_t *f, size_t len, uint32_t timeout_ms) {
+  struct mg_rw612 *s = &s_rw612;
+  uint8_t buf[2 * 160 + 6];
+  uint16_t fcs = 0xffff;
+  size_t i, n = 0;
+  uint64_t expire = mg_millis() + timeout_ms;
+  s->tid = (uint8_t) (s->tid % 15 + 1);
+  f[0] = (uint8_t) (0x80 | s->tid);  // Header: flag, interface 0, TID
+  s->rsp = false;
+  buf[n++] = 0x7e;
+  for (i = 0; i < len + 2 && n + 3 < sizeof(buf); i++) {
+    uint8_t c;
+    if (i < len) {
+      c = f[i], fcs = mg_rw612_fcs(fcs, c);
+    } else {
+      c = (uint8_t) (i == len ? ~fcs & 0xff : ~fcs >> 8);
+    }
+    if (c == 0x7e || c == 0x7d || c == 0x11 || c == 0x13 || c == 0xf8) {
+      buf[n++] = 0x7d, c ^= 0x20;
+    }
+    buf[n++] = c;
+  }
+  buf[n++] = 0x7e;
+  if (!mg_rw612_imumc_send(buf, n)) return false;
+  while (!s->rsp && mg_millis() < expire) mg_rw612_poll_imu();
+  return s->rsp;
+}
+
+static bool mg_rw612_set(uint32_t prop, const uint8_t *val, size_t len) {
+  uint8_t f[16];
+  if (len > sizeof(f) - 3) return false;
+  f[1] = MGI_CMD_SET, f[2] = (uint8_t) prop;  // Properties used are < 0x80
+  memcpy(f + 3, val, len);
+  return mg_rw612_request(f, len + 3, MGI_RSP_TIMEOUT_MS) &&
+         s_rw612.rsp_status == 0;
+}
+
+// Log an init error, return false
+static bool mg_rw612_fail(const char *msg) {
+  MG_ERROR(("%s", msg));
+  return false;
+}
+
+static bool mg_rw612_154_init(struct mg_tcpip_if *ifp) {
+  struct mg_rw612 *s = &s_rw612;
+  struct mg_l2_802154_data *d =
+      (struct mg_l2_802154_data *) ifp->driver_data;
+  uint8_t f[8], one = 1, pan[2];
+  uint64_t expire;
+  if (d == NULL || d->channel < 11 || d->channel > 26) {
+    MG_ERROR(("Set driver_data, channel 11..26"));
+    return false;
+  }
+  if (MGI_MBOX->magic[0] != MGI_SYNC_MAGIC) {
+    MG_ERROR(("Radio firmware is not running on CPU2"));
+    return false;
+  }
+  memset(s, 0, sizeof(*s));
+  s->free_bufs = 0xffff;
+  // Reset our send FIFO, drop stale messages. See IMU_Init()
+  MGI_IMU->CNTL |= MGI_IMU_FLUSH;
+  MGI_IMU->CNTL &= ~(MGI_IMU_FLUSH | MGI_IMU_WAIT_FOR_ACK);
+  MGI_IMU->CNTL = (MGI_IMU->CNTL & ~MGI_IMU_WATERMARK_MASK) |
+                  MGI_IMU_WATERMARK(15);
+  while ((MGI_IMU_PEER->STATUS & MGI_IMU_EMPTY) == 0) (void) MGI_IMU->RD_MSG;
+  // Synchronise the IMU link, then connect the IMUMC endpoints
+  MGI_MBOX->magic[1] = MGI_SYNC_MAGIC;
+  mg_rw612_control(MGI_CTL_SYNC, 0, 0, 0);
+  expire = mg_millis() + 1000;
+  while (!s->up && mg_millis() < expire) mg_rw612_poll_imu();
+  if (!s->up) return mg_rw612_fail("IMU sync timeout");
+  expire = mg_millis() + 2000;
+  while (!s->ept_ready && mg_millis() < expire) {
+    uint64_t retry = mg_millis() + 100;
+    mg_rw612_control(MGI_CTL_EPT_QUERY, MGI_EPT_REMOTE, 0, 1);
+    while (!s->ept_ready && mg_millis() < retry) mg_rw612_poll_imu();
+  }
+  if (!s->ept_ready) return mg_rw612_fail("IMUMC endpoint timeout");
+  // Reset the RCP stack, wait for its reset status, read its version
+  f[1] = MGI_CMD_RESET, f[2] = MGI_RESET_STACK;
+  mg_rw612_request(f, 3, MGI_RSP_TIMEOUT_MS);
+  expire = mg_millis() + 1000;
+  while (!s->reset && mg_millis() < expire) mg_rw612_poll_imu();
+  if (!s->reset) return mg_rw612_fail("RCP reset timeout");
+  f[1] = MGI_CMD_GET, f[2] = MGI_PROP_NCP_VERSION;
+  mg_rw612_request(f, 3, MGI_RSP_TIMEOUT_MS);
+  MG_INFO(("RCP: %s", s->version));
+  if (!mg_rw612_set(MGI_PROP_PHY_ENABLED, &one, 1)) {
+    return mg_rw612_fail("PHY enable failed");
+  }
+  pan[0] = (uint8_t) d->pan_id, pan[1] = (uint8_t) (d->pan_id >> 8);
+  if (!mg_rw612_set(MGI_PROP_PHY_CHAN, &d->channel, 1) ||
+      !mg_rw612_set(MGI_PROP_PANID, pan, 2)) {
+    return mg_rw612_fail("Channel or PAN ID set failed");
+  }
+  if (!mg_rw612_set(MGI_PROP_RAW_STREAM, &one, 1)) {
+    return mg_rw612_fail("Raw stream enable failed");
+  }
+  return true;
+}
+
+// Send one radio frame: MAC header and payload, no FCS
+static size_t mg_rw612_send(const uint8_t *p, size_t len,
+                            struct mg_tcpip_if *ifp) {
+  struct mg_l2_802154_data *d =
+      (struct mg_l2_802154_data *) ifp->driver_data;
+  uint8_t f[3 + 2 + 127 + 4];
+  size_t n = 3;
+  f[1] = MGI_CMD_SET, f[2] = MGI_PROP_STREAM_RAW;
+  f[n++] = (uint8_t) (len + 2), f[n++] = 0;  // PSDU length, incl. FCS
+  memcpy(f + n, p, len), n += len;
+  f[n++] = 0, f[n++] = 0;  // FCS, filled in by the radio
+  f[n++] = d->channel;
+  f[n++] = 4;  // Max CSMA backoffs
+  f[n++] = 0;  // Max frame retries: broadcast frames are not acknowledged
+  f[n++] = 1;  // CSMA-CA enabled
+  if (!mg_rw612_request(f, n, MGI_TX_TIMEOUT_MS)) {
+    MG_ERROR(("TX timeout"));
+    return 0;
+  }
+  if (s_rw612.rsp_status != 0) {
+    MG_VERBOSE(("TX failed, status %lu", (unsigned long) s_rw612.rsp_status));
+    return 0;
+  }
+  return len;
+}
+
+static size_t mg_rw612_154_tx(const void *buf, size_t len,
+                              struct mg_tcpip_if *ifp) {
+  return mg_l2_802154_tx(ifp, buf, len, mg_rw612_send);
+}
+
+static size_t mg_rw612_154_rx(void *buf, size_t len, struct mg_tcpip_if *ifp) {
+  struct mg_rw612 *s = &s_rw612;
+  size_t res = 0;
+  mg_rw612_poll_imu();
+  while (s->rxtail != s->rxhead && res == 0) {
+    res = mg_l2_802154_rx(ifp, s->rxq[s->rxtail], s->rxlen[s->rxtail], buf,
+                          len);
+    s->rxtail = (uint8_t) ((s->rxtail + 1) % MGI_RXQ_CNT);
+  }
+  return res;
+}
+
+static bool mg_rw612_154_poll(struct mg_tcpip_if *ifp, bool s1) {
+  (void) ifp, (void) s1;
+  return s_rw612.up;
+}
+
+struct mg_tcpip_driver mg_tcpip_driver_rw612_154 = {
+    mg_rw612_154_init, mg_rw612_154_tx, mg_rw612_154_rx, mg_rw612_154_poll};
+
+#endif

src/drivers/rw612_154.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#if MG_ENABLE_TCPIP && defined(MG_ENABLE_DRIVER_RW612_154) && \
+    MG_ENABLE_DRIVER_RW612_154
+
+// NXP RW612 IEEE 802.15.4 radio, as an Ethernet interface: Ethernet frames
+// are split into radio frames, see mg_l2_802154_tx(). The radio runs on
+// CPU2: NXP BLE/802.15.4 combo firmware, an OpenThread radio co-processor
+// (RCP). The firmware must be loaded and running before mg_tcpip_init(), see
+// the FRDM-RW612 eth_radio_bridge tutorial. The driver talks to it over the
+// CPU2 <-> CPU3 IMU mailbox: IMUMC messages carrying HDLC framed Spinel.
+// driver_data: struct mg_l2_802154_data, channel and PAN ID set
+
+#ifndef MG_TCPIP_DRIVER_INIT
+#define MG_TCPIP_DRIVER_INIT(mgr)                                       \
+  do {                                                                  \
+    static struct mg_l2_802154_data driver_data_;                     \
+    static struct mg_tcpip_if mif_;                                     \
+    driver_data_.channel = MG_L2_802154_CHANNEL;                      \
+    driver_data_.pan_id = MG_L2_802154_PAN_ID;                        \
+    mif_.driver = &mg_tcpip_driver_rw612_154;                           \
+    mif_.driver_data = &driver_data_;                                   \
+    MG_SET_MAC_ADDRESS(mif_.mac);                                       \
+    mg_tcpip_init(mgr, &mif_);                                          \
+    MG_INFO(("Driver: rw612_154, channel %d", MG_L2_802154_CHANNEL)); \
+  } while (0)
+#endif
+
+#endif

src/drivers/st67w6.c

@@ -365,7 +365,7 @@ static bool st67w6_init(uint8_t *mac) {
   }
   // set clock, who cares ???
   if (!st67w6_at_cmd("AT+GET_CLOCK\r\n", 14)) return false;
-  MG_DEBUG(("%.*s", s_at_resp_len, at_resp));  // TODO(scaprile): --> VERBOSE
+  MG_VERBOSE(("%.*s", s_at_resp_len, at_resp));
   // BT-ENABLED DEPENDENCY
 
   // MODULE DEPENDENCY

src/drivers/stm32h.c

@@ -2,6 +2,7 @@
 
 #if MG_ENABLE_TCPIP && (MG_ENABLE_DRIVER_STM32H || MG_ENABLE_DRIVER_MCXN || \
                         MG_ENABLE_DRIVER_STM32N)
+// STM32C: vendor modded single-queue Synopsys v5.4, same settings as STM32H
 // STM32H: vendor modded single-queue Synopsys v4.2
 // STM32N: dual-queue GbE Synopsys v5.2 with no hash table option, 64-bit AXI
 // MCXNx4x: dual-queue Synopsys v5.2 with no hash table option
@@ -310,7 +311,7 @@ static uint32_t s_rxno;
 #if MG_ENABLE_DRIVER_MCXN
 void ETHERNET_IRQHandler(void);
 void ETHERNET_IRQHandler(void) {
-#elif MG_ENABLE_DRIVER_STM32H
+#elif MG_ENABLE_DRIVER_STM32H && !MG_ENABLE_DRIVER_STM32C
 void ETH_IRQHandler(void);
 void ETH_IRQHandler(void) {
 #else
@@ -339,8 +340,10 @@ void ETH1_IRQHandler(void) {
   }
   ETH->DMACSR =
       MG_BIT(7) | MG_BIT(8);  // Clear possible RBU RPS while processing
-  ETH->DMACRDTPR =
+  // Resume RX: tail is the last descriptor given back to DMA. It must differ
-      (uint32_t) (uintptr_t) &s_rxdesc[ETH_DESC_CNT - 1];  // and resume RX
+  // from the DMA current descriptor, or some DMAs, e.g. STM32C5, stay suspended
+  ETH->DMACRDTPR = (uint32_t) (uintptr_t) &s_rxdesc[(s_rxno + ETH_DESC_CNT - 1) %
+                                                    ETH_DESC_CNT];
 }
 
 struct mg_tcpip_driver mg_tcpip_driver_stm32h = {

src/drivers/stm32h.h

@@ -4,6 +4,13 @@
 #if !defined(MG_ENABLE_DRIVER_STM32H)
 #define MG_ENABLE_DRIVER_STM32H 0
 #endif
+#if !defined(MG_ENABLE_DRIVER_STM32C)
+#define MG_ENABLE_DRIVER_STM32C 0
+#endif
+#if MG_ENABLE_DRIVER_STM32C  // STM32C5: STM32H5 MAC, the IRQ is ETH1
+#undef MG_ENABLE_DRIVER_STM32H
+#define MG_ENABLE_DRIVER_STM32H 1
+#endif
 #if !defined(MG_ENABLE_DRIVER_MCXN)
 #define MG_ENABLE_DRIVER_MCXN 0
 #endif
@@ -43,9 +50,11 @@ struct mg_tcpip_driver_stm32h_data {
 #define MG_DRIVER_MDC_CR 4
 #endif
 
-#if MG_ENABLE_DRIVER_STM32H && MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
+#if MG_ENABLE_DRIVER_STM32H && !MG_ENABLE_DRIVER_STM32C && \
+    MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
 #define MG_ENABLE_ETH_IRQ() NVIC_EnableIRQ(ETH_IRQn)
-#elif MG_ENABLE_DRIVER_STM32N && MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
+#elif (MG_ENABLE_DRIVER_STM32N || MG_ENABLE_DRIVER_STM32C) && \
+    MG_ARCH == MG_ARCH_CUBE && !defined(MG_ENABLE_ETH_IRQ)
 #define MG_ENABLE_ETH_IRQ() NVIC_EnableIRQ(ETH1_IRQn)
 #elif !defined(MG_ENABLE_ETH_IRQ)
 #define MG_ENABLE_ETH_IRQ()

src/health.c

@@ -6,7 +6,7 @@
 struct mg_health mg_health_record MG_HEALTH_RAM;
 
 // STM32 H723 support. Needs the _estack symbol from the linker script
-#if MG_ENABLE_HEALTH && (defined(STM32H7_DEV_ID) || defined(STM32H5))
+#if MG_ENABLE_HEALTH && (defined(STM32H7_DEV_ID) || defined(STM32H5) || defined(STM32C5))
 // Fault handler body. Runs in exception context: no printf, no malloc, no
 // blocking calls. Copies the unwind registers and raw stack into the health
 // record, then resets.

src/health.h

@@ -5,32 +5,15 @@
 #include "arch.h"
 #include "printf.h"
 
-// Memory usage in bytes. Override in mongoose_config.h for the target.
-#ifndef MG_HEALTH_STACK_USED
-#define MG_HEALTH_STACK_USED 0
-#endif
-
-#ifndef MG_HEALTH_STACK_TOTAL
-#define MG_HEALTH_STACK_TOTAL 0
-#endif
-
-#ifndef MG_HEALTH_HEAP_USED
-#define MG_HEALTH_HEAP_USED 0
-#endif
-
-#ifndef MG_HEALTH_HEAP_TOTAL
-#define MG_HEALTH_HEAP_TOTAL 0
-#endif
-
 #ifndef MG_HEALTH_MAGIC
 #define MG_HEALTH_MAGIC {'M', 'G', 'H', '3'}  // '3' is the layout version
 #endif
 
-#if !defined(MG_HEALTH_RAM) && (defined(STM32H7_DEV_ID) || defined(STM32H5))
+#if !defined(MG_HEALTH_RAM) && (defined(STM32H7_DEV_ID) || defined(STM32H5) || defined(STM32C5))
 #define MG_HEALTH_RAM __attribute__((section(".mg_health")))
 #endif
 
-#if !defined(MG_HEALTH_DATA_SIZE) && (defined(STM32H7_DEV_ID) || defined(STM32H5))
+#if !defined(MG_HEALTH_DATA_SIZE) && (defined(STM32H7_DEV_ID) || defined(STM32H5) || defined(STM32C5))
 #define MG_HEALTH_DATA_SIZE 250
 #endif
 

src/http.c

@@ -879,8 +879,8 @@ void mg_http_serve_upload(struct mg_connection *c, struct mg_http_message *hm,
     fs->rm(path);  // MG_FS_WRITE appends, not truncates: drop any old file
     if ((fd = mg_fs_open(fs, path, MG_FS_WRITE)) == NULL) {
       MG_ERROR(("Cannot open %s for upload", path));
-    } else if (!mg_http_stream_body(c, hm, serve_upload_cb, fd)) {
+    } else {
-      mg_fs_close(fd);
+      mg_http_stream_body(c, hm, serve_upload_cb, fd);
     }
   }
 }
@@ -1014,6 +1014,7 @@ struct mg_upload_state {
   size_t received;  // Number of body bytes received so far
   void *user_data;  // Passed to cb, free for cb to use
   bool failed;      // Set when cb returned false
+  bool finished;    // End callback has been called
 };
 
 // Event handler installed by mg_http_stream_body(). Feeds the body to the
@@ -1021,18 +1022,18 @@ struct mg_upload_state {
 // handler: the connection is closed after the reply.
 static void mg_stream_handler(struct mg_connection *c, int ev, void *ev_data) {
   struct mg_upload_state *us = (struct mg_upload_state *) c->data;
-    bool (*fn)(struct mg_http_message *, struct mg_str *, void **) =
+  bool (*fn)(struct mg_http_message *, struct mg_str *, void **) =
       (bool (*)(struct mg_http_message *, struct mg_str *, void **))
       (ptrdiff_t) c->fn_data;
   (void) ev_data;
   if (ev == MG_EV_CLOSE || ev == MG_EV_ERROR) {
-    if (us->received < us->expected) {
+    if (!us->finished) {
       // Connection dropped mid-upload. Let cb clean up, e.g. call mg_ota_end()
-      us->received = us->expected;  // MG_EV_ERROR is followed by MG_EV_CLOSE
+      us->finished = true;  // MG_EV_ERROR is followed by MG_EV_CLOSE
       fn(NULL, NULL, &us->user_data);
     }
-  } else if (ev == MG_EV_READ && !c->is_draining) {
+  } else if (ev == MG_EV_READ && !c->is_draining && !us->finished) {
-    if (c->recv.len > 0 && us->received < us->expected) {
+    if (!us->failed && c->recv.len > 0 && us->received < us->expected) {
       // Got some uploaded data. Feed by 512-byte aligned chunks, for OTA
       size_t left = us->expected - us->received, r = c->recv.len;
       size_t aligned = r < left ? MG_ROUND_DOWN(r, 512) : left;
@@ -1043,10 +1044,13 @@ static void mg_stream_handler(struct mg_connection *c, int ev, void *ev_data) {
       us->received += aligned;
       mg_iobuf_del(&c->recv, 0, aligned);  // Shift the unprocessed tail
     }
-    if (us->received >= us->expected) {
+    if (!us->finished && (us->failed || us->received >= us->expected)) {
       // Finished upload. Always call cb, even after error, so it can clean up
+      us->finished = true;
       us->failed |= !fn(NULL, NULL, &us->user_data);
-      if (!c->is_client) {
+      if (c->is_client && us->failed) {
+        mg_error(c, "Body streaming failed");
+      } else if (!c->is_client) {
         mg_http_reply(c, us->failed ? 500 : 200, NULL, "%zu %s\n",
                       us->received, us->failed ? "fail" : "ok");
       }
@@ -1055,48 +1059,54 @@ static void mg_stream_handler(struct mg_connection *c, int ev, void *ev_data) {
   }
 }
 
-bool mg_http_stream_body(struct mg_connection *c, struct mg_http_message *hm,
+void mg_http_stream_body(struct mg_connection *c, struct mg_http_message *hm,
                          bool (*cb)(struct mg_http_message *, struct mg_str *,
-                                    void **user_data),
+                                    void **),
                          void *user_data) {
   struct mg_upload_state *us = (struct mg_upload_state *) c->data;
-  struct mg_str *te = mg_http_get_header(hm, "Transfer-Encoding");
+  int code = 0;
-  bool handled = false;
+  size_t head_len = hm->head.len;
 
   // Catch upload requests early, without buffering whole body. Called on the
   // MG_EV_HTTP_HDRS event: we've received all HTTP headers but not necessarily
   // the full HTTP body
-  if (hm->body.len == (size_t) ~0 ||
+  if (!c->is_client && mg_strcmp(hm->method, mg_str("POST")) != 0 &&
-      (te != NULL && mg_strcasecmp(*te, mg_str("chunked")) == 0)) {
+      mg_strcmp(hm->method, mg_str("PUT")) != 0) {
-    // Unknown length or chunked, cannot stream. Leave it to the caller
+    code = 405;
-  } else if (!c->is_client &&
+  } else if (mg_http_get_header(hm, "Transfer-Encoding") != NULL) {
-             mg_strcmp(hm->method, mg_str("POST")) != 0 &&
+    code = 400;
-             mg_strcmp(hm->method, mg_str("PUT")) != 0) {
+  } else if (hm->body.len == (size_t) ~0 ||
-    // Not an upload request. Leave it to the caller
+             (!c->is_client && mg_http_get_header(hm, "Content-Length") == NULL)) {
+    code = 411;
   } else if (sizeof(*us) > sizeof(c->data)) {
-    if (!c->is_client) {  // Nobody to reply to on a client connection
+    code = 500;
-      c->pfn = NULL;
+  }
-      mg_http_reply(c, 500, NULL, "data too small\n");
+  c->pfn = NULL;  // Take ownership even when validation fails
-      c->is_draining = 1;
+  if (code != 0) {
-      cb(NULL, NULL, &user_data);  // Let cb release user_data, start skipped
+    c->fn = NULL;
-      handled = true;
+    c->fn_data = NULL;
+    mg_iobuf_del(&c->recv, 0, c->recv.len);
+    cb(NULL, NULL, &user_data);  // Release resources even if start was skipped
+    if (c->is_client) {
+      mg_error(c, "%s", mg_http_status_code_str(code));
+    } else {
+      mg_http_reply(c, code, code == 405 ? "Allow: POST, PUT\r\n" : NULL, "");
     }
+    c->is_draining = 1;
   } else {
-    c->pfn = NULL;  // Silence HTTP protocol handler
     memset(us, 0, sizeof(*us));
     us->expected = hm->body.len;  // Store number of bytes we expect
     us->user_data = user_data;
+    c->fn = mg_stream_handler;
+    c->fn_data = (void *) (ptrdiff_t) cb;
     us->failed = !cb(hm, NULL, &us->user_data);  // Call before deleting headers
-    if (mg_http_get_header(hm, "Expect") != NULL) {
+    if (!c->is_client && !us->failed && !us->finished &&
+        mg_http_get_header(hm, "Expect") != NULL) {
       mg_http_reply(c, 100, NULL, "");  // If curl expects, we continue
     }
-    mg_iobuf_del(&c->recv, 0, hm->head.len);  // Delete HTTP headers
+    mg_iobuf_del(&c->recv, 0, head_len);  // Delete HTTP headers
-    c->fn = mg_stream_handler;                // We own the connection from now
-    c->fn_data = (void *) (ptrdiff_t) cb;
     mg_call(c, MG_EV_READ, &c->recv.len);  // Process the body bytes we have
-    handled = true;
   }
-  return handled;
 }
 
 static bool is_hex_digit(int c) {

src/http.h

@@ -205,29 +205,32 @@ int mg_http_status(const struct mg_http_message *hm);
 
 // Streams a POST/PUT body to a callback as it arrives, without buffering it.
 // Call it from an MG_EV_HTTP_HDRS handler, after matching the request, e.g.
-// with mg_match(). Returns true if it took over the connection, false if the
+// with mg_match(). Always takes over the connection. Invalid requests receive
-// request is not POST/PUT, is chunked, or has no Content-Length.
+// an HTTP error; client-side failures call mg_error(). Replies and connection
+// draining are handled internally, including callback failures.
 //
 // Callback upload_fn(hm, data, user_data) is called:
 //   - at start: hm is set. Open the file, set *user_data.
 //   - per chunk: data is set, 512 byte aligned except the last. Not called
 //     again after a failure.
-//   - at end: both NULL. Always called once, also when the connection drops
+//   - at end: both NULL. Always called exactly once, including validation
-//     early, so release resources here. A truncated body looks like a complete
+//     failures before start and connections that drop early. Release resources
-//     one: validate before committing.
+//     here. A truncated body looks like a complete one: validate before
-// Return true on success, false on error.
+//     committing.
+// The callback returns true on success, false on error. A failure stops
+// streaming immediately and calls the end callback before closing.
 // Example:
-//   if (ev == MG_EV_HTTP_HDRS && mg_match(hm->uri, mg_str("/fs/*"), NULL) {
+//   if (ev == MG_EV_HTTP_HDRS && mg_match(hm->uri, mg_str("/fs/*"), NULL)) {
-//     mg_http_stream_body(c, hm, upload, NULL));
+//     mg_http_stream_body(c, hm, upload, NULL);
 //   }
 // Full example:
 //   tutorials/http/file-upload-single-post
 // Related APIs:
 //   mg_http_listen(), mg_http_next_multipart()
 // Notes:
-//   After it returns true, this function hijacks the connection. Existing event
+//   The existing event handler is no longer called. hm is invalid after this
-//   handler not called, hm is invalid, c->data and c->fn_data are modified
+//   call; c->data and c->fn_data are reserved for streaming state.
-bool mg_http_stream_body(struct mg_connection *c, struct mg_http_message *hm,
+void mg_http_stream_body(struct mg_connection *c, struct mg_http_message *hm,
                          bool (*upload_fn)(struct mg_http_message *,
                                            struct mg_str *, void **user_data),
                          void *user_data);

src/l2_802154.c

@@ -0,0 +1,60 @@
+#include "l2.h"
+#include "net_builtin.h"
+
+#if MG_ENABLE_TCPIP
+
+// Radio frame: 802.15.4 MAC header, 15 bytes: data frame, PAN ID compression,
+// broadcast destination, our EUI-64 made from MAC as source. Then 2 bytes:
+// tag, fragment index << 4 | last fragment index. Then data. 125 bytes max,
+// 127 minus FCS
+#define MGI_802154_HDR 17
+#define MGI_802154_DATA (125 - MGI_802154_HDR)
+
+size_t mg_l2_802154_tx(struct mg_tcpip_if *ifp, const void *buf, size_t len,
+                       size_t (*send_fn)(const uint8_t *, size_t,
+                                      struct mg_tcpip_if *)) {
+  struct mg_l2_802154_data *d =
+      (struct mg_l2_802154_data *) ifp->driver_data;
+  const uint8_t *p = (const uint8_t *) buf, *m = ifp->mac;
+  uint8_t f[MGI_802154_HDR + MGI_802154_DATA];
+  size_t i, n, last = (len - 1) / MGI_802154_DATA;
+  if (len == 0 || last > 15) return 0;
+  d->tag++;
+  for (i = 0; i <= last; i++) {
+    n = i == last ? len - i * MGI_802154_DATA : MGI_802154_DATA;
+    f[0] = 0x41, f[1] = 0xd8, f[2] = d->seq++;  // 2006 frame, see above
+    f[3] = (uint8_t) d->pan_id, f[4] = (uint8_t) (d->pan_id >> 8);
+    f[5] = f[6] = 0xff;
+    f[7] = m[5], f[8] = m[4], f[9] = m[3], f[10] = 0xfe, f[11] = 0xff;
+    f[12] = m[2], f[13] = m[1], f[14] = m[0];  // Little endian EUI-64
+    f[15] = d->tag, f[16] = (uint8_t) ((i << 4) | last);
+    memcpy(f + MGI_802154_HDR, p + i * MGI_802154_DATA, n);
+    if (send_fn(f, MGI_802154_HDR + n, ifp) == 0) return 0;
+  }
+  return len;
+}
+
+size_t mg_l2_802154_rx(struct mg_tcpip_if *ifp, const uint8_t *f, size_t n,
+                       void *buf, size_t len) {
+  struct mg_l2_802154_data *d =
+      (struct mg_l2_802154_data *) ifp->driver_data;
+  size_t idx, last;
+  if (n <= MGI_802154_HDR || f[0] != 0x41 || f[1] != 0xd8 ||
+      f[3] != (uint8_t) d->pan_id || f[4] != (uint8_t) (d->pan_id >> 8))
+    return 0;  // Not ours
+  idx = f[16] >> 4, last = f[16] & 15;
+  if (idx == 0) d->rxtag = f[15], d->rxnext = 0, d->rxlen = 0;
+  if (idx == 0) memcpy(d->rxsrc, f + 7, sizeof(d->rxsrc));
+  n -= MGI_802154_HDR;
+  if (idx != d->rxnext || idx > last || f[15] != d->rxtag ||
+      memcmp(d->rxsrc, f + 7, sizeof(d->rxsrc)) != 0 ||
+      d->rxlen + n > sizeof(d->rxbuf))
+    return 0;  // Missed a fragment, or from another sender
+  memcpy(d->rxbuf + d->rxlen, f + MGI_802154_HDR, n);
+  d->rxlen = (uint16_t) (d->rxlen + n), d->rxnext++;
+  if (idx < last || d->rxlen > len) return 0;
+  memcpy(buf, d->rxbuf, d->rxlen);
+  return d->rxlen;
+}
+
+#endif

src/mdash.c

@@ -105,14 +105,6 @@ static void mg_mdash_rpc_get_info(struct mg_rpc_req *r) {
             MG_ESC("crash"), mg_print_crash_record);
 }
 
-static void mg_mdash_rpc_mem_stats(struct mg_rpc_req *r) {
-  mg_rpc_ok(r, "{%m:%zu,%m:%zu,%m:%zu,%m:%zu}",              //
-            MG_ESC("stack_used"), (size_t) MG_HEALTH_STACK_USED,  //
-            MG_ESC("stack_total"), (size_t) MG_HEALTH_STACK_TOTAL,  //
-            MG_ESC("heap_used"), (size_t) MG_HEALTH_HEAP_USED,  //
-            MG_ESC("heap_total"), (size_t) MG_HEALTH_HEAP_TOTAL);
-}
-
 static void mg_mdash_rpc_ota_begin(struct mg_rpc_req *r) {
   size_t total = (size_t) mg_json_get_long(r->frame, "$.params.size", -1);
   if (mg_ota_begin(total)) {
@@ -158,7 +150,6 @@ void mg_mdash_init(struct mg_mgr *mgr) {
   MG_INFO(("Initialising mdash agent, key [%s]", MG_MDASH_KEY));
   mg_rpc_add(&mgr->rpcs, mg_str("RPC.List"), mg_rpc_list, NULL);
   mg_rpc_add(&mgr->rpcs, mg_str("Sys.GetInfo"), mg_mdash_rpc_get_info, NULL);
-  mg_rpc_add(&mgr->rpcs, mg_str("Sys.MemStats"), mg_mdash_rpc_mem_stats, NULL);
   mg_rpc_add(&mgr->rpcs, mg_str("OTA.Begin"), mg_mdash_rpc_ota_begin, NULL);
   mg_rpc_add(&mgr->rpcs, mg_str("OTA.Write"), mg_mdash_rpc_ota_write, NULL);
   mg_rpc_add(&mgr->rpcs, mg_str("OTA.End"), mg_mdash_rpc_ota_end, NULL);

src/net_builtin.h

@@ -154,6 +154,41 @@ extern struct mg_tcpip_driver mg_tcpip_driver_nxp_wifi;
 extern struct mg_tcpip_driver mg_tcpip_driver_st67w6;
 extern struct mg_tcpip_driver mg_tcpip_driver_atcmd;
 extern struct mg_tcpip_driver mg_tcpip_driver_netc;
+extern struct mg_tcpip_driver mg_tcpip_driver_mcxw71;
+extern struct mg_tcpip_driver mg_tcpip_driver_rw612_154;
+
+// IEEE 802.15.4 radio channel and PAN ID. Settable in mongoose_config.h
+#ifndef MG_L2_802154_CHANNEL
+#define MG_L2_802154_CHANNEL 15  // 11..26
+#endif
+#ifndef MG_L2_802154_PAN_ID
+#define MG_L2_802154_PAN_ID 0xabcd
+#endif
+
+// driver_data for IEEE 802.15.4 radio drivers. The interface is Ethernet:
+// each Ethernet frame is split into broadcast radio frames, and reassembled
+// on the other side, see mg_l2_802154_tx() and mg_l2_802154_rx()
+struct mg_l2_802154_data {
+  uint8_t channel;        // User-set channel, 11..26
+  uint16_t pan_id;        // User-set PAN ID
+  uint8_t seq, tag;       // MAC sequence number, tag of the last sent frame
+  uint8_t rxtag, rxnext;  // Frame being reassembled: tag, next fragment
+  uint8_t rxsrc[8];       // Its sender
+  uint16_t rxlen;         // Its bytes received so far
+  uint8_t rxbuf[1514];    // Reassembly buffer, one Ethernet frame
+};
+
+// Splits an Ethernet frame into radio frames, sends each by calling send().
+// Called by radio drivers' tx(). Return len, or 0 on error
+size_t mg_l2_802154_tx(struct mg_tcpip_if *ifp, const void *buf, size_t len,
+                       size_t (*send)(const uint8_t *, size_t,
+                                      struct mg_tcpip_if *));
+
+// Adds a received radio frame f of n bytes to the frame being reassembled.
+// Called by radio drivers' rx(). Return the Ethernet frame length, copied to
+// buf, when it is complete, otherwise 0
+size_t mg_l2_802154_rx(struct mg_tcpip_if *ifp, const uint8_t *f, size_t n,
+                       void *buf, size_t len);
 
 // SPI bus abstraction for SPI-attached network chips (e.g. W5500).
 // Populate and assign to the driver's driver_data field.

src/ota.c

@@ -208,9 +208,7 @@ static void s_firmware_fn(struct mg_connection *c, int ev, void *ev_data) {
                (unsigned long) hm->body.len, (unsigned long) s_ota->size);
     } else {
       MG_DEBUG(("Beginning OTA (%lu bytes)", (unsigned long) s_ota->size));
-      if (!mg_http_stream_body(c, hm, s_firmware_cb, NULL)) {
+      mg_http_stream_body(c, hm, s_firmware_cb, NULL);
-        mg_error(c, "Cannot stream firmware");
-      }
     }
   } else if (ev == MG_EV_ERROR) {
     s_ota->fn((char *) ev_data);
@@ -243,6 +241,21 @@ void mg_ota_url_check(struct mg_mgr *mgr, const char *json_url,
   }
 }
 
+// Uses *p as a flag: non-NULL means an OTA session is open and must be
+// closed by mg_ota_end()
+bool mg_http_ota_cb(struct mg_http_message *hm, struct mg_str *data, void **p) {
+  if (hm != NULL) {  // Start
+    if (!mg_ota_begin(hm->body.len)) return false;
+    *p = (void *) (ptrdiff_t) 1;
+    return true;
+  } else if (data != NULL) {  // Next chunk
+    return mg_ota_write(data->buf, data->len);
+  }
+  if (*p == NULL) return false;  // End. Begin failed, nothing to finish
+  *p = NULL;
+  return mg_ota_end();
+}
+
 void mg_ota_poll(struct mg_mgr *mgr) {
   static uint64_t t = 5000;  // Fire first time 5 sec after boot
 

src/ota.h

@@ -26,6 +26,7 @@
 #pragma once
 
 #include "arch.h"
+#include "http.h"
 #include "net.h"
 
 // Supported OTA targets
@@ -34,6 +35,7 @@
 #define MG_OTA_STM32H7 2            // STM32 H7
 #define MG_OTA_STM32H7_DUAL_CORE 3  // STM32 H7 dual core
 #define MG_OTA_STM32F 4             // STM32 F7/F4/F2
+#define MG_OTA_STM32C5 5            // STM32 C5, same flash controller as H5
 #define MG_OTA_CH32V307 100         // WCH CH32V307
 #define MG_OTA_U2A 200              // Renesas U2A16, U2A8, U2A6
 #define MG_OTA_RT1020 300           // IMXRT1020
@@ -43,6 +45,7 @@
 #define MG_OTA_RT1170 304           // IMXRT1170
 #define MG_OTA_RT1180 305           // IMXRT1180
 #define MG_OTA_MCXN 310             // MCXN947
+#define MG_OTA_MCXW71 311           // MCXW71
 #define MG_OTA_RW612 320            // FRDM-RW612
 #define MG_OTA_FLASH 900            // OTA via internal flash
 #define MG_OTA_ESP32 910            // ESP32 OTA implementation
@@ -72,6 +75,18 @@ bool mg_ota_write(const void *buf, size_t len);
 // Ends the OTA process and commits the written firmware.
 bool mg_ota_end(void);
 
+// Push-based OTA: mg_http_stream_body() callback that flashes the request
+//
+// ```c
+// if (ev == MG_EV_HTTP_HDRS) {
+//   struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+//   if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+//     mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+//   }
+// }
+// ```
+bool mg_http_ota_cb(struct mg_http_message *hm, struct mg_str *data, void **p);
+
 // MG_OTA_ROLLBACK: swap firmware banks and reset. On flash-based OTA, the
 // default calls swap_fn() (no-op on single-bank) then resets. Override in
 // mongoose_config.h for platforms without mg_flash (ESP32, PicoSDK, etc.).

src/ota_mcxw71.c

@@ -0,0 +1,181 @@
+#include "flash.h"
+#include "log.h"
+#include "ota.h"
+
+#if MG_OTA == MG_OTA_MCXW71
+
+// MCXW71SRM, section 11.2: ROM flash API, 8 KB sectors, 16-byte phrases,
+// 128-byte pages. Only the CM33 application flash is used; RF flash and IFR
+// (including the write-once ROM configuration) are left alone.
+struct mg_mcxw71_flash_config {
+  struct {
+    uint32_t base, size, blocks;
+    uint32_t ifr_base, ifr_size;
+  } mem[2];
+};
+
+struct mg_mcxw71_flash_api {
+  uint32_t (*init)(struct mg_mcxw71_flash_config *);
+  uint32_t (*erase)(struct mg_mcxw71_flash_config *, void *, uint32_t, uint32_t,
+                    uint32_t);
+  uint32_t (*phrase)(struct mg_mcxw71_flash_config *, void *, uint32_t,
+                     uint32_t *, uint32_t);
+  uint32_t (*page)(struct mg_mcxw71_flash_config *, void *, uint32_t,
+                   uint32_t *, uint32_t);
+};
+
+// The flash API pointer is the second entry in the ROM API table.
+#define MG_MCXW71_FLASH_API \
+  (*(const struct mg_mcxw71_flash_api *const *) 0x14816fe4U)
+#define MG_MCXW71_ERASE_KEY 0x6b65666cU  // FOUR_CHAR_CODE('l', 'f', 'e', 'k')
+
+static struct mg_mcxw71_flash_config s_mcxw71_config;
+static size_t s_mcxw71_size, s_mcxw71_received, s_mcxw71_pending;
+static uint32_t s_mcxw71_buf[4];
+static bool s_mcxw71_failed;
+
+static bool mg_mcxw71_write(void *, const void *, size_t);
+static bool mg_mcxw71_swap(void);
+static struct mg_flash s_mg_flash_mcxw71 = {
+    (void *) 0, 0x100000, 8192, 16, mg_mcxw71_write, mg_mcxw71_swap};
+struct mg_flash *mg_flash = &s_mg_flash_mcxw71;
+
+// Everything called while flash is busy, or after the application has been
+// erased, must execute from RAM or ROM. Do not log or call libc here.
+MG_IRAM static bool mg_mcxw71_write(void *addr, const void *buf, size_t len) {
+  uintptr_t dst = (uintptr_t) addr;
+  const volatile uint8_t *src = (const volatile uint8_t *) buf;
+  uint32_t irq, status = 0;
+  if (dst >= s_mg_flash_mcxw71.size || len > s_mg_flash_mcxw71.size - dst ||
+      (dst % 16) != 0 || (len % 16) != 0)
+    return false;
+
+  irq = __get_PRIMASK();
+  __disable_irq();
+  while (len > 0 && status == 0) {
+    uint32_t words[32];  // ROM needs a word-aligned source in RAM
+    volatile uint8_t *p = (volatile uint8_t *) words;
+    size_t i, n = (dst % 128) == 0 && len >= 128 ? 128 : 16;
+    for (i = 0; i < n; i++) p[i] = src[i];
+
+    // Match the MCUXpresso ROM wrappers' cache maintenance. Interrupts stay
+    // masked until the flash command completes and stale cache data is gone.
+    MCM->CPCR2 |= MCM_CPCR2_CCBC_MASK;
+    __DSB();
+    __ISB();
+    if ((dst % 8192) == 0) {
+      status = MG_MCXW71_FLASH_API->erase(
+          &s_mcxw71_config, FMU0, (uint32_t) dst, 8192, MG_MCXW71_ERASE_KEY);
+    }
+    if (status == 0) {
+      if (n == 128) {
+        status = MG_MCXW71_FLASH_API->page(&s_mcxw71_config, FMU0,
+                                           (uint32_t) dst, words, 128);
+      } else {
+        status = MG_MCXW71_FLASH_API->phrase(&s_mcxw71_config, FMU0,
+                                             (uint32_t) dst, words, 16);
+      }
+    }
+    MCM->CPCR2 |= MCM_CPCR2_CCBC_MASK;
+    __DSB();
+    __ISB();
+    dst += n, src += n, len -= n;
+  }
+  __set_PRIMASK(irq);
+  return status == 0;
+}
+
+static bool mg_mcxw71_swap(void) {
+  // The common helper verifies the staged image before the RAM copy below.
+  // A failed write must never commit, even if all expected bytes arrived.
+  return !s_mcxw71_failed;
+}
+
+MG_IRAM static void mg_mcxw71_apply(size_t size) {
+  size_t ofs, half = s_mg_flash_mcxw71.size / 2;
+  __disable_irq();
+  SysTick->CTRL = 0;
+  for (ofs = 0; ofs < size; ofs += 8192) {
+    if (!mg_mcxw71_write((void *) (uintptr_t) ofs,
+                         (const void *) (uintptr_t) (half + ofs), 8192)) {
+      // The application may already be erased. Stay in RAM for debugger
+      // recovery rather than return to partially overwritten flash.
+      for (;;) __NOP();
+    }
+  }
+  __DSB();
+  SCB->AIRCR = 0x05fa0004U;
+  __DSB();
+  for (;;) __NOP();
+}
+
+bool mg_ota_begin(size_t new_firmware_size) {
+  uint32_t status;
+  if (s_mcxw71_size != 0 || new_firmware_size == 0) return false;
+  status = MG_MCXW71_FLASH_API->init(&s_mcxw71_config);
+  if (status != 0 || s_mcxw71_config.mem[0].base != 0 ||
+      s_mcxw71_config.mem[0].size < 16384 ||
+      (s_mcxw71_config.mem[0].size % 16384) != 0) {
+    MG_ERROR(("Flash init failed: %lu", (unsigned long) status));
+    return false;
+  }
+  s_mg_flash_mcxw71.size = s_mcxw71_config.mem[0].size;
+  if (!mg_ota_flash_begin(new_firmware_size, &s_mg_flash_mcxw71)) return false;
+  s_mcxw71_size = new_firmware_size;
+  s_mcxw71_received = s_mcxw71_pending = 0;
+  s_mcxw71_failed = false;
+  return true;
+}
+
+bool mg_ota_write(const void *buf, size_t len) {
+  const uint8_t *p = (const uint8_t *) buf;
+  uint8_t *pending = (uint8_t *) s_mcxw71_buf;
+  if (s_mcxw71_size == 0 || s_mcxw71_failed) return false;
+  if (len > s_mcxw71_size - s_mcxw71_received || (len > 0 && buf == NULL)) {
+    s_mcxw71_failed = true;
+    return false;
+  }
+  s_mcxw71_received += len;
+  if (s_mcxw71_pending > 0) {
+    size_t n = 16 - s_mcxw71_pending;
+    if (n > len) n = len;
+    if (n > 0) memcpy(pending + s_mcxw71_pending, p, n);
+    s_mcxw71_pending += n;
+    if (n > 0) p += n;
+    len -= n;
+    if (s_mcxw71_pending == 16) {
+      s_mcxw71_failed = !mg_ota_flash_write(pending, 16, &s_mg_flash_mcxw71);
+      s_mcxw71_pending = 0;
+    }
+  }
+  if (!s_mcxw71_failed && len >= 16) {
+    size_t n = MG_ROUND_DOWN(len, 16);
+    s_mcxw71_failed = !mg_ota_flash_write(p, n, &s_mg_flash_mcxw71);
+    p += n, len -= n;
+  }
+  if (!s_mcxw71_failed && len > 0) {
+    memcpy(pending + s_mcxw71_pending, p, len);
+    s_mcxw71_pending += len;
+  }
+  return !s_mcxw71_failed;
+}
+
+bool mg_ota_end(void) {
+  bool ok;
+  size_t size = s_mcxw71_size;
+  if (size == 0) return false;
+  if (s_mcxw71_received != size) s_mcxw71_failed = true;
+  if (!s_mcxw71_failed && s_mcxw71_pending > 0) {
+    s_mcxw71_failed =
+        !mg_ota_flash_write(s_mcxw71_buf, s_mcxw71_pending, &s_mg_flash_mcxw71);
+  }
+  ok = mg_ota_flash_end(&s_mg_flash_mcxw71);
+  s_mcxw71_size = s_mcxw71_pending = 0;
+  if (ok) {
+    MG_INFO(("Applying %lu bytes from staging flash", (unsigned long) size));
+    mg_mcxw71_apply(size);
+  }
+  return false;
+}
+
+#endif

src/ota_stm32h5.c

@@ -2,7 +2,7 @@
 #include "log.h"
 #include "ota.h"
 
-#if MG_OTA == MG_OTA_STM32H5
+#if MG_OTA == MG_OTA_STM32H5 || MG_OTA == MG_OTA_STM32C5
 
 static bool mg_stm32h5_write(void *, const void *, size_t);
 static bool mg_stm32h5_swap(void);

src/util.c

@@ -261,8 +261,9 @@ uint64_t mg_ntohll(uint64_t net) {
 }
 
 void mg_delayms(unsigned int ms) {
-  uint64_t to = mg_millis() + ms + 1;
+  uint64_t now, to = mg_millis() + ms + 1;
-  while (mg_millis() < to) (void) 0;
+  while ((now = mg_millis()) < to)
+    if (now + ms + 1 < to) to = now + ms + 1;
 }
 
 #if MG_ENABLE_CUSTOM_CALLOC

test/bsd/bsd_x_test.c

@@ -555,7 +555,6 @@ static void task2(void *args) {
   DASHBOARD("select_child_write");
   DASHBOARD("poll_child_write");
 
-  #if 0
   s_error = false;
   s_backlog_ready = s_backlog_full = s_backlog_accept = false;
   ASSERT(xTaskCreate(backlog_task, "backlog", 512, NULL,
@@ -570,12 +569,6 @@ static void task2(void *args) {
   while (!client_done(first, &status)) vTaskDelay(1);
   check_client(status);
   DASHBOARD("listen_backlog");
-#else
-    (void) first;
-    (void) second;
-    (void) status;
-    (void) backlog_task;
-#endif
 
   s_error = false;
   // atask at higher priority than task1

test/unit_test.c

@@ -3158,8 +3158,6 @@ static bool su_cb(struct mg_http_message *hm, struct mg_str *data, void **p) {
 static void su(struct mg_connection *c, int ev, void *ev_data) {
   if (ev == MG_EV_HTTP_HDRS) {
     mg_http_stream_body(c, (struct mg_http_message *) ev_data, su_cb, NULL);
-  } else if (ev == MG_EV_HTTP_MSG) {  // Only for requests that were not streamed
-    mg_http_reply(c, 400, "", "not streamed\n");
   }
 }
 
@@ -3194,8 +3192,7 @@ static void cr(struct mg_connection *c, int ev, void *ev_data) {
   if (ev == MG_EV_CONNECT) {
     mg_printf(c, "GET / HTTP/1.0\r\n\r\n");
   } else if (ev == MG_EV_HTTP_HDRS) {
-    ASSERT(mg_http_stream_body(c, (struct mg_http_message *) ev_data, cr_cb,
+    mg_http_stream_body(c, (struct mg_http_message *) ev_data, cr_cb, NULL);
-                               NULL));
   }
 }
 
@@ -3208,12 +3205,103 @@ static void cs(struct mg_connection *c, int ev, void *ev_data) {
   (void) ev_data;
 }
 
+struct stream_test_state {
+  int fail_at, starts, chunks, ends;
+};
+
+static bool stream_test_cb(struct mg_http_message *hm, struct mg_str *data,
+                            void **p) {
+  struct stream_test_state *s = (struct stream_test_state *) *p;
+  ASSERT(s != NULL);
+  if (hm != NULL) {
+    s->starts++;
+    return s->fail_at != 1;
+  } else if (data != NULL) {
+    s->chunks++;
+    return s->fail_at != 2;
+  }
+  s->ends++;
+  *p = NULL;
+  return s->fail_at != 3;
+}
+
+static void stream_test_original(struct mg_connection *c, int ev, void *data) {
+  (void) c, (void) ev, (void) data;
+  ASSERT(false);  // Streaming must take ownership even when validation fails
+}
+
+static void test_http_stream_errors(void) {
+  static const struct {
+    const char *request;
+    int client, fail_at, body_size, code, starts, chunks;
+  } cases[] = {
+      {"GET / HTTP/1.1\r\nContent-Length: 0\r\n\r\n", 0, 0, 0, 405, 0, 0},
+      {"POST / HTTP/1.1\r\n\r\n", 0, 0, 0, 411, 0, 0},
+      {"POST / HTTP/1.1\r\nTransfer-Encoding: chunked\r\n\r\n",
+       0, 0, 0, 400, 0, 0},
+      {"POST / HTTP/1.1\r\nContent-Length: 3\r\n\r\nabc", 0, 0, 0, 200, 1, 1},
+      {"PUT / HTTP/1.1\r\nContent-Length: 0\r\n\r\n", 0, 0, 0, 200, 1, 0},
+      // Start failure must reply without waiting for the body or sending 100.
+      {"POST / HTTP/1.1\r\nContent-Length: 1000000\r\nExpect: 100-continue\r\n\r\n",
+       0, 1, 0, 500, 1, 0},
+      // Write failure must also reply before the announced body is complete.
+      {"POST / HTTP/1.1\r\nContent-Length: 1000000\r\n\r\n",
+       0, 2, 512, 500, 1, 1},
+      {"POST / HTTP/1.1\r\nContent-Length: 3\r\n\r\nabc", 0, 3, 0, 500, 1, 1},
+      // Clients close on errors and never send an HTTP error response.
+      {"HTTP/1.1 200 OK\r\n\r\n", 1, 0, 0, 411, 0, 0},
+      {"HTTP/1.1 200 OK\r\nTransfer-Encoding: chunked\r\n\r\n",
+       1, 0, 0, 400, 0, 0},
+      {"HTTP/1.1 200 OK\r\nContent-Length: 1000000\r\n\r\n",
+       1, 1, 0, 500, 1, 0},
+      {"HTTP/1.1 200 OK\r\nContent-Length: 1000000\r\n\r\n",
+       1, 2, 512, 500, 1, 1},
+      {"HTTP/1.1 200 OK\r\nContent-Length: 3\r\n\r\nabc", 1, 3, 0, 500, 1, 1},
+      {"HTTP/1.1 200 OK\r\nContent-Length: 3\r\n\r\nabc", 1, 0, 0, 200, 1, 1},
+      {"HTTP/1.1 204 No Content\r\n\r\n", 1, 0, 0, 200, 1, 0},
+  };
+  size_t i;
+  for (i = 0; i < sizeof(cases) / sizeof(cases[0]); i++) {
+    struct mg_connection c;
+    struct mg_http_message hm;
+    struct stream_test_state state = {0, 0, 0, 0};
+    char body[512];
+    memset(&c, 0, sizeof(c));
+    memset(body, 'x', sizeof(body));
+    state.fail_at = cases[i].fail_at;
+    c.is_client = cases[i].client != 0;
+    c.fn = c.pfn = stream_test_original;
+    mg_iobuf_add(&c.recv, 0, cases[i].request, strlen(cases[i].request));
+    mg_iobuf_add(&c.recv, c.recv.len, body, (size_t) cases[i].body_size);
+    ASSERT(mg_http_parse((char *) c.recv.buf, c.recv.len, &hm) > 0);
+    mg_http_stream_body(&c, &hm, stream_test_cb, &state);
+    ASSERT(c.pfn == NULL && c.is_draining);
+    ASSERT(state.starts == cases[i].starts && state.chunks == cases[i].chunks);
+    ASSERT(state.ends == 1);
+    if (c.is_client) {
+      ASSERT(c.send.len == 0);
+      ASSERT(c.is_closing == (cases[i].code != 200));
+    } else {
+      ASSERT(mg_http_parse((char *) c.send.buf, c.send.len, &hm) > 0);
+      ASSERT(mg_http_status(&hm) == cases[i].code);
+      ASSERT(hm.message.len == c.send.len);  // Exactly one response
+    }
+    mg_call(&c, MG_EV_READ, NULL);
+    mg_error(&c, "stream cleanup test");
+    mg_call(&c, MG_EV_CLOSE, NULL);
+    ASSERT(state.ends == 1);  // Error followed by close must not clean up twice
+    mg_iobuf_free(&c.recv);
+    mg_iobuf_free(&c.send);
+  }
+}
+
 static void test_http_upload(void) {
   struct mg_mgr mgr;
   const char *url = "http://127.0.0.1:12352";
   int i;
   const char *s = "ok (8 foo\nbar\n)\n";
 
+  test_http_stream_errors();
   mg_mgr_init(&mgr);
   mg_http_listen(&mgr, url, us, NULL);
   mg_http_connect(&mgr, url, uc, (void *) &s);
@@ -3257,7 +3345,7 @@ static void test_http_upload(void) {
     ASSERT(mgr.conns == NULL);
   }
 
-  // mg_http_stream_body: chunked request is not streamed, caller replies "400"
+  // mg_http_stream_body: chunked request rejected with "400", cleanup still runs
   {
     char buf[FETCH_BUF_SIZE];
     s_su_done = s_su_end = 0;
@@ -3268,7 +3356,7 @@ static void test_http_upload(void) {
                  "POST /su_chunked.txt HTTP/1.1\r\n"
                  "Transfer-Encoding: chunked\r\n\r\n"
                  "3\r\nfoo\r\n0\r\n\r\n") == 400);
-    ASSERT(s_su_done == 0 && s_su_end == 0);  // The callback was never called
+    ASSERT(s_su_done == 1 && s_su_end == 1);  // End called without start
     ASSERT(fopen("su_chunked.txt", "r") == NULL);
     mg_mgr_free(&mgr);
     ASSERT(mgr.conns == NULL);
@@ -5010,6 +5098,20 @@ static void test_dash(void) {
                "Authorization: Basic YWRtaW46YWRtaW4=\n\n") == 200);
   ASSERT(cmpbody(buf, login_admin_expected) == 0);
 
+  // OTA uses streaming and enforces the dashboard's authentication.
+  ASSERT(fetch(&mgr, buf, url,
+               "POST /api/ota HTTP/1.0\nContent-Length: 1\n\nx") == 403);
+  ASSERT(fetch(&mgr, buf, url,
+               "GET /api/ota HTTP/1.0\nContent-Length: 0\n"
+               "Authorization: Basic YWRtaW46YWRtaW4=\n\n") == 405);
+  ASSERT(fetch(&mgr, buf, url,
+               "POST /ota HTTP/1.0\nContent-Length: 1\n"
+               "Authorization: Basic YWRtaW46YWRtaW4=\n\nx") == 404);
+  ASSERT(fetch(&mgr, buf, url,
+               "POST /api/ota HTTP/1.0\nContent-Length: 1\n"
+               "Authorization: Basic YWRtaW46YWRtaW4=\n\nx") == 200);
+  ASSERT(cmpbody(buf, "1 ok\n") == 0);
+
   // set3 is admin-only
   ASSERT(fetch(&mgr, buf, url,
                "GET /api/get/set3 HTTP/1.0\n"

tutorials/esp32/minimal/Makefile

@@ -1,9 +1,11 @@
 THISDIR = $(realpath $(CURDIR))
 ROOTDIR = $(realpath $(CURDIR)/../../..)
 DOCKER ?= docker run --rm $(DA) -v $(ROOTDIR):$(ROOTDIR) -w $(THISDIR) espressif/idf
-CMD ?= idf.py build
+CMD ?= idf.py -DCFLAGS_EXTRA="$(CFLAGS_EXTRA)" build
 PORT ?= /dev/ttyUSB0
 
+CFLAGS_EXTRA ?= -DMG_TLS=MG_TLS_BUILTIN
+
 all: example
 
 example:

tutorials/esp32/minimal/main/CMakeLists.txt

@@ -12,3 +12,5 @@ idf_component_register(SRCS "main.c"
                                 espcoredump
                                 nvs_flash
                                 app_update)
+separate_arguments(CFLAGS_EXTRA)
+component_compile_options(${CFLAGS_EXTRA})

tutorials/esp32/minimal/main/main.c

@@ -44,6 +44,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     size_t total = heap_caps_get_total_size(MALLOC_CAP_DEFAULT);

tutorials/esp32/minimal/main/mongoose_config.h

@@ -1,4 +1 @@
 #define MG_ARCH MG_ARCH_ESP32
-
-#define MG_TLS MG_TLS_BUILTIN
-//#define MG_TLS MG_TLS_MBED

tutorials/micropython/esp32/mongoose/main.c

@@ -9,7 +9,12 @@ static void t_fn(void *arg) {  // Tick periodically
 }
 
 static void fn(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) mg_http_reply(c, 200, "", "hi\n");
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) mg_http_reply(c, 200, "", "hi\n");
   (void) ev_data;
 }
 

tutorials/micropython/mongoose/main.c

@@ -9,7 +9,12 @@ static void t_fn(void *arg) {  // Tick periodically
 }
 
 static void fn(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) mg_http_reply(c, 200, "", "hi\n");
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) mg_http_reply(c, 200, "", "hi\n");
   (void) ev_data;
 }
 

tutorials/micropython/mongoose/module.c

@@ -3,24 +3,24 @@
 extern void mgmp_init(void);
 extern void mgmp_poll(int);
 
-STATIC mp_obj_t mongoose_init(void) {
+static mp_obj_t mongoose_init(void) {
     mgmp_init();
     return mp_const_none;
 }
-STATIC MP_DEFINE_CONST_FUN_OBJ_0(mongoose_init_obj, mongoose_init);
+static MP_DEFINE_CONST_FUN_OBJ_0(mongoose_init_obj, mongoose_init);
 
-STATIC mp_obj_t mongoose_poll(mp_obj_t t_obj) {
+static mp_obj_t mongoose_poll(mp_obj_t t_obj) {
     mgmp_poll(mp_obj_get_int(t_obj));
     return mp_const_none;
 }
-STATIC MP_DEFINE_CONST_FUN_OBJ_1(mongoose_poll_obj, mongoose_poll);
+static MP_DEFINE_CONST_FUN_OBJ_1(mongoose_poll_obj, mongoose_poll);
 
-STATIC const mp_rom_map_elem_t mongoose_module_globals_table[] = {
+static const mp_rom_map_elem_t mongoose_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_mongoose) },
     { MP_ROM_QSTR(MP_QSTR_init), MP_ROM_PTR(&mongoose_init_obj) },
     { MP_ROM_QSTR(MP_QSTR_poll), MP_ROM_PTR(&mongoose_poll_obj) },
 };
-STATIC MP_DEFINE_CONST_DICT(mongoose_module_globals, mongoose_module_globals_table);
+static MP_DEFINE_CONST_DICT(mongoose_module_globals, mongoose_module_globals_table);
 
 const mp_obj_module_t mongoose_module = {
     .base = { &mp_type_module },

tutorials/mqtt/mqtt-client/mongoose_mqtt.c

@@ -120,7 +120,7 @@ void mg_mqtt_poll(struct mg_mgr *mgr) {
 
   // Reconnect if connection is closed, and send MQTT PINGs to keep
   // the connection alive or to detect connection loss
-  if (mg_timer_expired(&timer, MQTT_RECONNECT_PERIOD_MS, mg_now())) {
+  if (mg_timer_expired(&timer, MQTT_RECONNECT_PERIOD_MS, mg_millis())) {
     if (s_mqtt_conn == NULL) {
       struct mg_mqtt_opts opts = {
           .clean = true,

tutorials/nxp/frdm-imxrt1186/minimal/main.c

@@ -65,6 +65,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/nxp/frdm-mcxe247/minimal/main.c

@@ -89,6 +89,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/nxp/frdm-mcxn947/minimal/main.c

@@ -97,6 +97,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/nxp/frdm-mcxw71/minimal/Makefile

@@ -0,0 +1,45 @@
+# Environment setup: https://mongoose.ws/documentation/tutorials/tools/
+
+MGDIR = ../../../..
+
+CFLAGS  = -W -Wall -Wextra -Werror -Wundef -Wshadow
+CFLAGS += -Wformat-truncation -fno-common -Wno-conversion -Wno-sign-conversion
+CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
+CFLAGS += -I. -I$(MGDIR) -Icmsis_core/CMSIS/Core/Include
+CFLAGS += -Icmsis_mcxw71/MCXW/MCXW716C -Icmsis_mcxw71/MCXW/periph2
+CFLAGS += -DCPU_MCXW716CMFTA
+CFLAGS += -D__START=main -D__STARTUP_CLEAR_BSS  # For startup_MCXW716C.S
+CFLAGS += -mcpu=cortex-m33 -mthumb -mfloat-abi=hard -mfpu=fpv5-sp-d16 $(CFLAGS_EXTRA)
+
+LDFLAGS ?= -Tlink.ld -nostdlib -nostartfiles --specs=nano.specs -lc -lm -lgcc -Wl,--gc-sections
+
+SOURCES = main.c hal.c $(MGDIR)/mongoose.c
+SOURCES += $(MGDIR)/tutorials/mqtt/mqtt-client/mongoose_mqtt.c
+SOURCES += cmsis_mcxw71/MCXW/MCXW716C/gcc/startup_MCXW716C.S
+
+all build: firmware.bin
+
+firmware.bin: firmware.elf
+	arm-none-eabi-objcopy -O binary $< $@
+	arm-none-eabi-size --format=berkeley $<
+
+firmware.elf: cmsis_core cmsis_mcxw71 $(SOURCES) $(wildcard *.h) link.ld Makefile
+	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@
+
+cmsis_core:
+	git clone -q -c advice.detachedHead=false --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
+
+# Device headers and startup code from MCUXpresso SDK, only MCXW716C files
+cmsis_mcxw71:
+	git clone -q --depth 1 --filter=blob:none --sparse https://github.com/nxp-mcuxpresso/mcux-devices-mcx $@
+	cd $@ && git sparse-checkout set MCXW/MCXW716C MCXW/periph2
+
+# Show all symbols sorted by size
+show_symbols_sorted_by_size: firmware.bin
+	arm-none-eabi-readelf -sW firmware.elf | sed 1,3d | sed 's,^.*: ,,' | tr -s ' ' | cut -d ' ' -f 2,7 | sort -nk1 | grep -v '^0 '
+
+flash: firmware.bin
+	LinkServer flash MCXW716C:FRDM-MCXW71 load firmware.elf
+
+clean:
+	rm -rf firmware.* cmsis_*

tutorials/nxp/frdm-mcxw71/minimal/hal.c

@@ -0,0 +1,164 @@
+// Copyright (c) 2026 Cesanta Software Limited
+// All rights reserved
+
+#include "hal.h"
+#include "mongoose.h"
+
+// Initialise the transceiver the way NXP XCVR_Init() does it: start the RF
+// oscillator, wait for the radio to wake up, enable its clocks and load the
+// 802.15.4 register setup. Then select the legacy 802.15.4 demodulator and
+// CCA from RX digital. See PhyHwInit() in NXP ieee_802_15_4 PHY sources,
+// PhyPacketProcessor.c
+bool hal_radio_init(void) {
+  uint32_t stat = RFMC_RF2P4GHZ_STAT_RST_STAT_MASK |
+                  RFMC_RF2P4GHZ_STAT_LP_ACK_STAT_MASK;
+  size_t i, n = 1000000;
+  RFMC->CTRL &= ~RFMC_CTRL_RFMC_RST_MASK;                // RFMC out of reset
+  RFMC->RF2P4GHZ_CTRL |= RFMC_RF2P4GHZ_CTRL_XO_EN_MASK;  // Start RF oscillator
+  RFMC->RF2P4GHZ_CTRL &=
+      ~(RFMC_RF2P4GHZ_CTRL_LP_ENTER_MASK | RFMC_RF2P4GHZ_CTRL_RF_POR_MASK |
+        RFMC_RF2P4GHZ_CTRL_RST_MASK);  // Release radio reset, no low power
+  while ((RFMC->RF2P4GHZ_STAT & stat) != 0 ||
+         (RFMC->XO_STAT & RFMC_XO_STAT_XTAL_RDY_MASK) == 0) {
+    if (--n == 0) return false;  // Radio did not wake up
+  }
+  RADIO_CTRL->LL_CTRL = RADIO_CTRL_LL_CTRL_ACTIVE_LL_MASK;
+  RFMC->RF2P4GHZ_CTRL |=
+      RFMC_RF2P4GHZ_CTRL_BLE_LP_EN_MASK | RFMC_RF2P4GHZ_CTRL_BLE_WKUP_MASK;
+  for (i = 0; i < sizeof(s_radio_regs) / sizeof(s_radio_regs[0]); i++) {
+    *s_radio_regs[i].reg = s_radio_regs[i].val;
+  }
+  XCVR_MISC->XCVR_CTRL &= ~XCVR_MISC_XCVR_CTRL_DEMOD_SEL_MASK;
+  XCVR_MISC->XCVR_CTRL |= XCVR_MISC_XCVR_CTRL_DEMOD_SEL(2);
+  XCVR_ZBDEMOD->CCA_LQI_SRC |= XCVR_ZBDEMOD_CCA_LQI_SRC_CCA1_FROM_RX_DIG(1);
+  return true;
+}
+
+// Random bytes for Mongoose, MG_ENABLE_CUSTOM_RANDOM. Entropy is radio noise:
+// receiver RSSI, sampled while the radio receives, mixed with SysTick by
+// SHA-256. Good enough for random addresses and nonces, not a certified TRNG
+bool mg_random(void *buf, size_t len) {
+  static uint32_t counter;
+  uint8_t digest[32], *p = (uint8_t *) buf;
+  size_t i, n;
+  while (len > 0) {
+    mg_sha256_ctx ctx;
+    mg_sha256_init(&ctx);
+    counter++;
+    mg_sha256_update(&ctx, (uint8_t *) &counter, sizeof(counter));
+    for (i = 0; i < 64; i++) {
+      uint32_t sample[2] = {XCVR_RX_DIG->NB_RSSI_RES0, SysTick->VAL};
+      mg_sha256_update(&ctx, (uint8_t *) sample, sizeof(sample));
+      for (n = 0; n < 50; n++) __NOP();  // Let the RSSI update
+    }
+    mg_sha256_final(digest, &ctx);
+    n = len < sizeof(digest) ? len : sizeof(digest);
+    memcpy(p, digest, n), p += n, len -= n;
+  }
+  return true;
+}
+
+// Added to minimise the bin size: avoid pulling printf and friends
+void __assert_func(const char *s, int line, const char *fn, const char *expr) {
+  (void) s, (void) line, (void) fn, (void) expr;
+  for (;;) (void) 0;  // or trigger the fault handler
+}
+
+bool hal_timer_expired(volatile uint64_t *t, uint64_t period, uint64_t now) {
+  uint64_t diff = now - *t;         // Wrap-safe elapsed time since last expiry
+  if (period == 0) return false;    // Avoid division by zero
+  if (diff < period) return false;  // Period has not elapsed yet
+  *t += (diff / period) * period;   // Preserve cadence, skip missed periods
+  return true;
+}
+
+static volatile uint64_t s_ticks;  // Milliseconds since boot
+void SysTick_Handler(void) {       // SyStick IRQ handler, triggered every 1ms
+  s_ticks++;
+}
+
+uint64_t hal_get_tick(void) {
+  return s_ticks;
+}
+
+uint32_t SystemCoreClock;
+
+// Called by the startup code before .data and .bss are initialised, so it
+// must not write any variables. Clock and SysTick setup is in main()
+void SystemInit(void) {
+  hal_sys_init();
+}
+
+struct stat;
+__attribute__((weak)) int _fstat(int fd, struct stat *st) {
+  (void) fd, (void) st;
+  return -1;
+}
+
+extern unsigned char _end[];  // End of data section, start of heap. See link.ld
+static unsigned char *s_current_heap_end = _end;
+
+size_t hal_ram_used(void) {
+  return (size_t) (s_current_heap_end - _end);
+}
+
+size_t hal_ram_free(void) {
+  unsigned char endofstack;
+  return (size_t) (&endofstack - s_current_heap_end);
+}
+
+void *_sbrk(int incr) {
+  unsigned char *prev_heap;
+  unsigned char *heap_end = (unsigned char *) ((size_t) &heap_end - 256);
+  prev_heap = s_current_heap_end;
+  // Check how much space we  got from the heap end to the stack end
+  if (s_current_heap_end + incr > heap_end) return (void *) -1;
+  s_current_heap_end += incr;
+  return prev_heap;
+}
+
+__attribute__((weak)) int _open(const char *path) {
+  (void) path;
+  return -1;
+}
+
+__attribute__((weak)) int _close(int fd) {
+  (void) fd;
+  return -1;
+}
+
+__attribute__((weak)) int _isatty(int fd) {
+  (void) fd;
+  return 1;
+}
+
+__attribute__((weak)) int _lseek(int fd, int ptr, int dir) {
+  (void) fd, (void) ptr, (void) dir;
+  return 0;
+}
+
+__attribute__((weak)) void _exit(int status) {
+  (void) status;
+  for (;;) asm volatile("BKPT #0");
+}
+
+__attribute__((weak)) void _kill(int pid, int sig) {
+  (void) pid, (void) sig;
+}
+
+__attribute__((weak)) int _getpid(void) {
+  return -1;
+}
+
+__attribute__((weak)) int _write(int fd, char *ptr, int len) {
+  (void) fd, (void) ptr, (void) len;
+  return -1;
+}
+
+__attribute__((weak)) int _read(int fd, char *ptr, int len) {
+  (void) fd, (void) ptr, (void) len;
+  return -1;
+}
+
+__attribute__((weak)) void _init(void) {
+}

tutorials/nxp/frdm-mcxw71/minimal/hal.h

@@ -0,0 +1,418 @@
+// Copyright (c) 2026 Cesanta Software Limited
+// All rights reserved
+//
+// FRDM-MCXW71 hardware abstraction layer. MCXW716C reference: MCUXpresso SDK,
+// https://github.com/nxp-mcuxpresso/mcux-devices-mcx, MCXW/MCXW716C
+
+#pragma once
+
+#include "MCXW716C.h"
+
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+uint64_t hal_get_tick(void);
+bool hal_timer_expired(volatile uint64_t *t, uint64_t period, uint64_t now);
+size_t hal_ram_used(void);
+size_t hal_ram_free(void);
+bool hal_radio_init(void);  // Set up the 2.4 GHz transceiver for 802.15.4
+extern uint32_t SystemCoreClock;  // CPU clock, Hz. Set by hal_clock_init()
+
+
+#define BIT(x) (1UL << (x))
+#define CLRSET(reg, clear, set) ((reg) = ((reg) & ~(clear)) | (set))
+#define SIRC_FREQUENCY 6000000UL  // Slow IRC (FRO6M), Hz
+
+// MRCC peripheral clock source, MRCC_xx[MUX], see fsl_clock.h
+enum { MRCC_SRC_FRO6M = 2, MRCC_SRC_FRO192M = 3 };
+
+// Fast IRC frequency, Hz, or 0 if FIRC is not running. See CLOCK_GetFircFreq()
+static inline uint32_t hal_firc_freq(void) {
+  static const uint32_t freqs[] = {48000000, 64000000, 96000000, 192000000};
+  if ((SCG0->FIRCCSR & SCG_FIRCCSR_FIRCVLD_MASK) == 0) return 0;
+  return freqs[SCG0->FIRCCFG & SCG_FIRCCFG_RANGE_MASK];
+}
+
+// Switch the system clock: source (2 SIRC, 3 FIRC), core and slow dividers
+// as divider - 1. Wait until the switch is done. See CLOCK_SetRunModeSysClkConfig
+static inline void hal_set_sysclk(uint32_t src, uint32_t divcore,
+                                  uint32_t divslow) {
+  SCG0->RCCR = SCG_RCCR_SCS(src) | SCG_RCCR_DIVCORE(divcore) |
+               SCG_RCCR_DIVSLOW(divslow);
+  while (((SCG0->CSR & SCG_CSR_SCS_MASK) >> SCG_CSR_SCS_SHIFT) != src) (void) 0;
+}
+
+// Run the core at 96 MHz from FIRC, slow clock 24 MHz. Order as in NXP
+// BOARD_BootClockRUN(), clock_config.c: raise the core voltage and memory
+// timing first, then the clock. FIRC can only be changed when not in use
+static inline void hal_clock_96mhz(void) {
+  while (SPC0->SC & SPC_SC_BUSY_MASK) (void) 0;
+  CLRSET(SPC0->ACTIVE_CFG, SPC_ACTIVE_CFG_CORELDO_VDD_LVL_MASK,
+         SPC_ACTIVE_CFG_CORELDO_VDD_LVL(2));  // Normal voltage
+  while (SPC0->SC & SPC_SC_BUSY_MASK) (void) 0;
+  CLRSET(FMU0->FCTRL, FMU_FCTRL_RWSC_MASK, FMU_FCTRL_RWSC(2));  // Wait states
+  CLRSET(SPC0->SRAMCTL, SPC_SRAMCTL_VSM_MASK, SPC_SRAMCTL_VSM(2));  // 1.1 V
+  SPC0->SRAMCTL |= SPC_SRAMCTL_REQ_MASK;
+  while ((SPC0->SRAMCTL & SPC_SRAMCTL_ACK_MASK) == 0) (void) 0;
+  SPC0->SRAMCTL &= ~SPC_SRAMCTL_REQ_MASK;
+  hal_set_sysclk(2, 0, 3);                 // Run from SIRC meanwhile
+  SCG0->FIRCCSR &= ~SCG_FIRCCSR_LK_MASK;   // Unlock
+  SCG0->FIRCCSR = SCG_FIRCCSR_FIRCERR_MASK;  // Disable, clear error
+  SCG0->FIRCCFG = SCG_FIRCCFG_RANGE(2);    // 96 MHz
+  SCG0->FIRCCSR |= SCG_FIRCCSR_FIRCEN_MASK;
+  while ((SCG0->FIRCCSR & SCG_FIRCCSR_FIRCVLD_MASK) == 0) (void) 0;
+  hal_set_sysclk(3, 0, 3);                 // FIRC, core / 1, slow / 4
+}
+
+// Set the CPU clock to 96 MHz, then work out SystemCoreClock from the SCG
+// clock source and core divider
+static inline void hal_clock_init(void) {
+  uint32_t csr, freq = 0;
+  hal_clock_96mhz();
+  csr = SCG0->CSR;
+  uint32_t src = (csr & SCG_CSR_SCS_MASK) >> SCG_CSR_SCS_SHIFT;
+  uint32_t div = ((csr & SCG_CSR_DIVCORE_MASK) >> SCG_CSR_DIVCORE_SHIFT) + 1;
+  if (src == 2) freq = SIRC_FREQUENCY;   // Slow IRC
+  if (src == 3) freq = hal_firc_freq();  // Fast IRC
+  if (freq == 0) freq = SIRC_FREQUENCY;  // Unknown source, assume reset value
+  SystemCoreClock = freq / div;
+  SysTick_Config(SystemCoreClock / 1000);  // Sys tick every 1ms
+}
+
+// Enable peripheral clock and take it out of reset, from given clock source.
+// See CLOCK_SetIpSrc() and CLOCK_EnableClock() in fsl_clock.h
+static inline void hal_periph_clock(volatile uint32_t *mrcc, uint32_t src) {
+  uint32_t v = (*mrcc & ~(MRCC_CC_MASK | MRCC_MUX_MASK | MRCC_DIV_MASK)) |
+               MRCC_MUX(src);
+  *mrcc = v;                                   // Source, clock still off
+  *mrcc = v | 1U;                              // CC = 1: clock on
+  if (*mrcc & MRCC_PR_MASK) *mrcc |= MRCC_RSTB_MASK;  // Release reset
+  __DSB();
+}
+
+// LPUART1 is wired to the MCU-Link debug probe USB serial port.
+// TX = PTC3, RX = PTC2, both pin mux alternative 3. See board.h, pin_mux.c
+static inline void hal_uart_init(LPUART_Type *uart, unsigned long baud) {
+  uint32_t src = MRCC_SRC_FRO192M, freq = hal_firc_freq();
+  uint32_t best_osr = 16, best_sbr = 1, best_err = UINT32_MAX, osr;
+  if (freq == 0) src = MRCC_SRC_FRO6M, freq = SIRC_FREQUENCY;  // FIRC off
+  hal_periph_clock(&MRCC->MRCC_PORTC, 0);
+  PORTC->PCR[2] = PORT_PCR_MUX(3);  // RX
+  PORTC->PCR[3] = PORT_PCR_MUX(3);  // TX
+  hal_periph_clock(&MRCC->MRCC_LPUART1, src);
+  // Find the oversampling ratio (4..32) that gives the lowest baud rate error
+  for (osr = 4; osr <= 32; osr++) {
+    uint32_t sbr = (freq + osr * baud / 2) / (osr * baud), actual, err;
+    if (sbr == 0 || sbr > 0x1fff) continue;
+    actual = freq / (osr * sbr);
+    err = actual > baud ? actual - baud : baud - actual;
+    if (err < best_err) best_err = err, best_osr = osr, best_sbr = sbr;
+  }
+  uart->CTRL = 0;  // Disable while configuring
+  uart->BAUD = LPUART_BAUD_OSR(best_osr - 1) | LPUART_BAUD_SBR(best_sbr) |
+               (best_osr < 8 ? LPUART_BAUD_BOTHEDGE_MASK : 0);
+  uart->CTRL = LPUART_CTRL_TE_MASK | LPUART_CTRL_RE_MASK;
+}
+
+static inline void hal_uart_write_byte(LPUART_Type *uart, uint8_t byte) {
+  while ((uart->STAT & LPUART_STAT_TDRE_MASK) == 0) (void) 0;
+  uart->DATA = byte;
+}
+
+static inline void hal_uart_write_buf(LPUART_Type *uart, const char *buf,
+                                      size_t len) {
+  while (len-- > 0) hal_uart_write_byte(uart, *(const uint8_t *) buf++);
+}
+
+// WDOG0 runs after reset: disable it, as SystemInit() in system_MCXW716C.c
+static inline void hal_wdog_disable(void) {
+  while ((WDOG0->CS & WDOG_CS_RCS_MASK) == 0) (void) 0;
+  if (WDOG0->CS & WDOG_CS_CMD32EN_MASK) {
+    WDOG0->CNT = 0xD928C520U;  // Unlock sequence
+  } else {
+    WDOG0->CNT = 0xC520U;
+    WDOG0->CNT = 0xD928U;
+  }
+  while ((WDOG0->CS & WDOG_CS_ULK_MASK) == 0) (void) 0;
+  WDOG0->TOVAL = 0xFFFF;
+  WDOG0->CS = (WDOG0->CS & ~WDOG_CS_EN_MASK) | WDOG_CS_UPDATE_MASK;
+  while ((WDOG0->CS & WDOG_CS_RCS_MASK) == 0) (void) 0;
+}
+
+static inline void hal_sys_init(void) {
+  SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2));  // Enable FPU
+  hal_wdog_disable();
+}
+
+// 802.15.4 (O-QPSK 250 kbps) radio register setup for the MCXW71 transceiver.
+// Values are taken from the NXP XCVR driver, release/25.06.00, configs/gen45:
+// XCVR_RadioGenRegSetup() and XCVR_RadioGenRBMESetup() with
+// xcvr_oqpsk_802p15p4_250kbps_full_config and xcvr_ble_uncoded_config.
+// https://github.com/nxp-mcuxpresso/mcuxsdk-middleware-xcvr
+// Copyright 2016 Freescale Semiconductor, Inc.
+// Copyright 2018-2023 NXP
+// SPDX-License-Identifier: BSD-3-Clause
+
+// One radio register write
+struct w71_radio_reg {
+  volatile uint32_t *reg;  // Register address
+  uint32_t val;            // Value to write
+};
+
+// Register writes, in the order the NXP driver performs them
+static const struct w71_radio_reg s_radio_regs[] = {
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[0].DMD_WAVE_REG0, 0x0420b3d3},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[0].DMD_WAVE_REG1, 0x31d78f00},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[0].DMD_WAVE_REG2, 0x00025a6d},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[1].DMD_WAVE_REG0, 0x0420b3d3},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[1].DMD_WAVE_REG1, 0x38d78f00},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[1].DMD_WAVE_REG2, 0x0000403c},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[2].DMD_WAVE_REG0, 0x3c00420b},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[2].DMD_WAVE_REG1, 0x082c8100},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[2].DMD_WAVE_REG2, 0x0003c004},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[3].DMD_WAVE_REG0, 0x3c00420b},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[3].DMD_WAVE_REG1, 0x0f2c8100},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[3].DMD_WAVE_REG2, 0x0001b5d3},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[4].DMD_WAVE_REG0, 0x0403ce35},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[4].DMD_WAVE_REG1, 0x31d78f00},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[4].DMD_WAVE_REG2, 0x00025a6d},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[5].DMD_WAVE_REG0, 0x0403ce35},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[5].DMD_WAVE_REG1, 0x38d78f00},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[5].DMD_WAVE_REG2, 0x0000403c},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[6].DMD_WAVE_REG0, 0x3ce35c6d},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[6].DMD_WAVE_REG1, 0x082c8100},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[6].DMD_WAVE_REG2, 0x0003c004},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[7].DMD_WAVE_REG0, 0x3ce35c6d},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[7].DMD_WAVE_REG1, 0x0f2c8100},
+    {&XCVR_2P4GHZ_PHY->DEMOD_WAVE[7].DMD_WAVE_REG2, 0x0001b5d3},
+    {&XCVR_2P4GHZ_PHY->DMD_CTRL0, 0x6d940101},
+    {&XCVR_2P4GHZ_PHY->DMD_CTRL1, 0xa8049008},
+    {&XCVR_2P4GHZ_PHY->FSK_CFG0, 0x15001502},
+    {&XCVR_2P4GHZ_PHY->FSK_CFG1, 0x0f080020},
+    {&XCVR_2P4GHZ_PHY->FSK_CFG2, 0x40000000},
+    {&XCVR_2P4GHZ_PHY->FSK_FAD_CFG, 0x00000000},
+    {&XCVR_2P4GHZ_PHY->FSK_FAD_CTRL, 0x00000000},
+    {&XCVR_2P4GHZ_PHY->FSK_PD_CFG0, 0x0000ff0c},
+    {&XCVR_2P4GHZ_PHY->FSK_PD_CFG1, 0x00000055},
+    {&XCVR_2P4GHZ_PHY->FSK_PD_CFG2, 0x00f600f6},
+    {&XCVR_2P4GHZ_PHY->FSK_PD_PH[0], 0x00030503},
+    {&XCVR_2P4GHZ_PHY->FSK_PD_PH[1], 0x003d3b3d},
+    {&XCVR_2P4GHZ_PHY->FSK_PT, 0x00000048},
+    {&XCVR_2P4GHZ_PHY->LR_AA_CFG, 0x06020696},
+    {&XCVR_2P4GHZ_PHY->LR_PD_CFG, 0x0001019a},
+    {&XCVR_2P4GHZ_PHY->LR_PD_PH[0], 0x3d383028},
+    {&XCVR_2P4GHZ_PHY->LR_PD_PH[1], 0x20283038},
+    {&XCVR_2P4GHZ_PHY->LR_PD_PH[2], 0x03081018},
+    {&XCVR_2P4GHZ_PHY->LR_PD_PH[3], 0x20181008},
+    {&XCVR_2P4GHZ_PHY->MISC, 0x03ff00a0},
+    {&XCVR_2P4GHZ_PHY->PREPHY_MISC, 0x00000c10},
+    {&XCVR_2P4GHZ_PHY->RTT_CTRL, 0x00004166},
+    {&XCVR_2P4GHZ_PHY->RTT_REF, 0x00806348},
+    {&XCVR_2P4GHZ_PHY->SM_CFG, 0x00a02432},
+    {&RADIO_CTRL->LL_CTRL, 0x00000001},
+    {&XCVR_ANALOG->LDO_0, 0x04440400},
+    {&XCVR_ANALOG->LDO_1, 0x00000005},
+    {&XCVR_ANALOG->PLL, 0x00000040},
+    {&XCVR_ANALOG->RX_0, 0x01000002},
+    {&XCVR_ANALOG->RX_1, 0x00022008},
+    {&XCVR_ANALOG->TX_DAC_PA, 0x01000000},
+    {&XCVR_ANALOG->XO_DIST, 0x00000000},
+    {&XCVR_MISC->IPS_FO_ADDR[0], 0x00000370},
+    {&XCVR_MISC->IPS_FO_ADDR[1], 0x0000002c},
+    {&XCVR_MISC->IPS_FO_DRS0_DATA[0], 0x00000000},
+    {&XCVR_MISC->IPS_FO_DRS0_DATA[1], 0x00000000},
+    {&XCVR_MISC->IPS_FO_DRS1_DATA[0], 0x00000000},
+    {&XCVR_MISC->IPS_FO_DRS1_DATA[1], 0x00000000},
+    {&XCVR_MISC->LDO_TRIM_0, 0x00020000},
+    {&XCVR_MISC->LDO_TRIM_1, 0x00000000},
+    {&XCVR_MISC->XCVR_CTRL, 0x00130180},
+    {&XCVR_PLL_DIG->CHAN_MAP, 0x00040000},
+    {&XCVR_PLL_DIG->CHAN_MAP_EXT, 0x00100000},
+    {&XCVR_PLL_DIG->DATA_RATE_OVRD_CTRL1, 0x00000089},
+    {&XCVR_PLL_DIG->DATA_RATE_OVRD_CTRL2, 0x00180000},
+    {&XCVR_PLL_DIG->DELAY_MATCH, 0x00050102},
+    {&XCVR_PLL_DIG->HPMCAL_CTRL, 0x00002000},
+    {&XCVR_PLL_DIG->HPM_BUMP, 0x00440144},
+    {&XCVR_PLL_DIG->HPM_CAL_TIMING, 0x00000000},
+    {&XCVR_PLL_DIG->HPM_CTRL, 0x00840000},
+    {&XCVR_PLL_DIG->HPM_SDM_RES, 0x00ff0000},
+    {&XCVR_PLL_DIG->LOCK_DETECT, 0x0e1a1800},
+    {&XCVR_PLL_DIG->LPM_CTRL, 0x88880a00},
+    {&XCVR_PLL_DIG->LPM_SDM_CTRL1, 0x00260000},
+    {&XCVR_PLL_DIG->MOD_CTRL, 0x80000000},
+    {&XCVR_PLL_DIG->PLL_DATARATE_CTRL, 0x04126644},
+    {&XCVR_PLL_DIG->TUNING_CAP_RX_CTRL, 0x00000000},
+    {&XCVR_PLL_DIG->TUNING_CAP_TX_CTRL, 0x00ffffa3},
+    {&XCVR_RX_DIG->ACQ_FILT_0_3, 0x737f0502},
+    {&XCVR_RX_DIG->ACQ_FILT_0_3_DRS, 0x0f7f3a01},
+    {&XCVR_RX_DIG->ACQ_FILT_10_11, 0x00ef0061},
+    {&XCVR_RX_DIG->ACQ_FILT_10_11_DRS, 0x012b0021},
+    {&XCVR_RX_DIG->ACQ_FILT_4_7, 0xf8221478},
+    {&XCVR_RX_DIG->ACQ_FILT_4_7_DRS, 0x3c06617f},
+    {&XCVR_RX_DIG->ACQ_FILT_8_9, 0x01d501bc},
+    {&XCVR_RX_DIG->ACQ_FILT_8_9_DRS, 0x019401f3},
+    {&XCVR_RX_DIG->AGC_CTRL, 0x587c8d19},
+    {&XCVR_RX_DIG->AGC_CTRL_STAT, 0x0000872c},
+    {&XCVR_RX_DIG->AGC_IDX0_GAIN_CFG, 0x000000f2},
+    {&XCVR_RX_DIG->AGC_IDX0_GAIN_VAL, 0x000003fd},
+    {&XCVR_RX_DIG->AGC_IDX0_THR, 0x0000001e},
+    {&XCVR_RX_DIG->AGC_IDX10_GAIN_CFG, 0x00004a03},
+    {&XCVR_RX_DIG->AGC_IDX10_GAIN_VAL, 0x000000eb},
+    {&XCVR_RX_DIG->AGC_IDX10_THR, 0x0096001e},
+    {&XCVR_RX_DIG->AGC_IDX11_GAIN_CFG, 0x00007e03},
+    {&XCVR_RX_DIG->AGC_IDX11_GAIN_VAL, 0x000000fa},
+    {&XCVR_RX_DIG->AGC_IDX11_THR, 0x00780000},
+    {&XCVR_RX_DIG->AGC_IDX1_GAIN_CFG, 0x000001b2},
+    {&XCVR_RX_DIG->AGC_IDX1_GAIN_VAL, 0x0000000b},
+    {&XCVR_RX_DIG->AGC_IDX1_THR, 0x015e001e},
+    {&XCVR_RX_DIG->AGC_IDX2_GAIN_CFG, 0x00000123},
+    {&XCVR_RX_DIG->AGC_IDX2_GAIN_VAL, 0x00000026},
+    {&XCVR_RX_DIG->AGC_IDX2_THR, 0x00c8001e},
+    {&XCVR_RX_DIG->AGC_IDX3_GAIN_CFG, 0x00000113},
+    {&XCVR_RX_DIG->AGC_IDX3_GAIN_VAL, 0x0000003c},
+    {&XCVR_RX_DIG->AGC_IDX3_THR, 0x00c8001e},
+    {&XCVR_RX_DIG->AGC_IDX4_GAIN_CFG, 0x00000083},
+    {&XCVR_RX_DIG->AGC_IDX4_GAIN_VAL, 0x00000057},
+    {&XCVR_RX_DIG->AGC_IDX4_THR, 0x00c8001e},
+    {&XCVR_RX_DIG->AGC_IDX5_GAIN_CFG, 0x00000183},
+    {&XCVR_RX_DIG->AGC_IDX5_GAIN_VAL, 0x0000006d},
+    {&XCVR_RX_DIG->AGC_IDX5_THR, 0x00fa001e},
+    {&XCVR_RX_DIG->AGC_IDX6_GAIN_CFG, 0x00000203},
+    {&XCVR_RX_DIG->AGC_IDX6_GAIN_VAL, 0x00000087},
+    {&XCVR_RX_DIG->AGC_IDX6_THR, 0x012c001e},
+    {&XCVR_RX_DIG->AGC_IDX7_GAIN_CFG, 0x00000603},
+    {&XCVR_RX_DIG->AGC_IDX7_GAIN_VAL, 0x000000a0},
+    {&XCVR_RX_DIG->AGC_IDX7_THR, 0x012c001e},
+    {&XCVR_RX_DIG->AGC_IDX8_GAIN_CFG, 0x00000e03},
+    {&XCVR_RX_DIG->AGC_IDX8_GAIN_VAL, 0x000000b7},
+    {&XCVR_RX_DIG->AGC_IDX8_THR, 0x012c001e},
+    {&XCVR_RX_DIG->AGC_IDX9_GAIN_CFG, 0x00002203},
+    {&XCVR_RX_DIG->AGC_IDX9_GAIN_VAL, 0x000000d2},
+    {&XCVR_RX_DIG->AGC_IDX9_THR, 0x0096001e},
+    {&XCVR_RX_DIG->AGC_MIS_GAIN_CFG, 0x00000001},
+    {&XCVR_RX_DIG->AGC_THR_FAST, 0x0190000f},
+    {&XCVR_RX_DIG->AGC_THR_FAST_DRS, 0x0190001e},
+    {&XCVR_RX_DIG->AGC_THR_MIS, 0x00960028},
+    {&XCVR_RX_DIG->AGC_TIMING0, 0x04102398},
+    {&XCVR_RX_DIG->AGC_TIMING0_DRS, 0x40002000},
+    {&XCVR_RX_DIG->AGC_TIMING1, 0x190242a7},
+    {&XCVR_RX_DIG->AGC_TIMING1_DRS, 0x000002a7},
+    {&XCVR_RX_DIG->AGC_TIMING2, 0xe000007f},
+    {&XCVR_RX_DIG->AGC_TIMING2_DRS, 0x0000007f},
+    {&XCVR_RX_DIG->CTRL0, 0x68063083},
+    {&XCVR_RX_DIG->CTRL0_DRS, 0x000030c0},
+    {&XCVR_RX_DIG->CTRL1, 0x00000180},
+    {&XCVR_RX_DIG->DCOC_CTRL0, 0x04332d28},
+    {&XCVR_RX_DIG->DCOC_CTRL0_DRS, 0x00000114},
+    {&XCVR_RX_DIG->DCOC_CTRL1, 0x00000000},
+    {&XCVR_RX_DIG->DEMOD_FILT_0_1, 0x01fe01fd},
+    {&XCVR_RX_DIG->DEMOD_FILT_0_1_DRS, 0x00ff0003},
+    {&XCVR_RX_DIG->DEMOD_FILT_2_4, 0x0ba20824},
+    {&XCVR_RX_DIG->DEMOD_FILT_2_4_DRS, 0x124221ff},
+    {&XCVR_RX_DIG->NB_RSSI_CTRL0, 0xed472234},
+    {&XCVR_RX_DIG->NB_RSSI_CTRL1, 0x00000000},
+    {&XCVR_RX_DIG->RCCAL_CTRL0, 0x0000003a},
+    {&XCVR_RX_DIG->RSSI_GLOBAL_CTRL, 0x80008330},
+    {&XCVR_RX_DIG->WB_RSSI_CTRL, 0x00223342},
+    {&XCVR_TSM->CTRL, 0xff000000},
+    {&XCVR_TSM->END_OF_SEQ, 0x5c5a7270},
+    {&XCVR_TSM->FAST_CTRL1, 0x24006f00},
+    {&XCVR_TSM->FAST_CTRL2, 0x66284208},
+    {&XCVR_TSM->FAST_CTRL3, 0x18001800},
+    {&XCVR_TSM->RECYCLE_COUNT, 0x00001258},
+    {&XCVR_TSM->TIMING00, 0xffffffff},
+    {&XCVR_TSM->TIMING01, 0xffffffff},
+    {&XCVR_TSM->TIMING02, 0xffffffff},
+    {&XCVR_TSM->TIMING03, 0xffffffff},
+    {&XCVR_TSM->TIMING04, 0xffffffff},
+    {&XCVR_TSM->TIMING05, 0xffffffff},
+    {&XCVR_TSM->TIMING06, 0xffffffff},
+    {&XCVR_TSM->TIMING07, 0xffffffff},
+    {&XCVR_TSM->TIMING08, 0xffffffff},
+    {&XCVR_TSM->TIMING09, 0x5700ffff},
+    {&XCVR_TSM->TIMING10, 0x11081108},
+    {&XCVR_TSM->TIMING11, 0x5b137113},
+    {&XCVR_TSM->TIMING12, 0x5b19714f},
+    {&XCVR_TSM->TIMING13, 0x572dffff},
+    {&XCVR_TSM->TIMING14, 0x0000716f},
+    {&XCVR_TSM->TIMING15, 0x5b58716f},
+    {&XCVR_TSM->TIMING16, 0x59580000},
+    {&XCVR_TSM->TIMING17, 0x5b580000},
+    {&XCVR_TSM->TIMING18, 0x5b580000},
+    {&XCVR_TSM->TIMING19, 0x11061106},
+    {&XCVR_TSM->TIMING20, 0x11001100},
+    {&XCVR_TSM->TIMING21, 0x19001100},
+    {&XCVR_TSM->TIMING22, 0x58006f00},
+    {&XCVR_TSM->TIMING23, 0x58006f00},
+    {&XCVR_TSM->TIMING24, 0x5b007100},
+    {&XCVR_TSM->TIMING25, 0x5c007200},
+    {&XCVR_TSM->TIMING26, 0x5c007200},
+    {&XCVR_TSM->TIMING27, 0x5c007200},
+    {&XCVR_TSM->TIMING28, 0x5c007200},
+    {&XCVR_TSM->TIMING29, 0xffff7200},
+    {&XCVR_TSM->TIMING30, 0x5c00ffff},
+    {&XCVR_TSM->TIMING31, 0x5b087108},
+    {&XCVR_TSM->TIMING32, 0x1911ffff},
+    {&XCVR_TSM->TIMING33, 0x23115a11},
+    {&XCVR_TSM->TIMING34, 0x5b117111},
+    {&XCVR_TSM->TIMING35, 0x5b117111},
+    {&XCVR_TSM->TIMING36, 0x5b117111},
+    {&XCVR_TSM->TIMING37, 0x5b117111},
+    {&XCVR_TSM->TIMING38, 0x5b117111},
+    {&XCVR_TSM->TIMING39, 0x5b2b7111},
+    {&XCVR_TSM->TIMING40, 0xffff7111},
+    {&XCVR_TSM->TIMING41, 0xffff7111},
+    {&XCVR_TSM->TIMING42, 0x5b127112},
+    {&XCVR_TSM->TIMING43, 0x5b12ffff},
+    {&XCVR_TSM->TIMING44, 0x5b12ffff},
+    {&XCVR_TSM->TIMING45, 0xffff7112},
+    {&XCVR_TSM->TIMING46, 0xffff716f},
+    {&XCVR_TSM->TIMING47, 0x5b137157},
+    {&XCVR_TSM->TIMING48, 0x5b23715a},
+    {&XCVR_TSM->TIMING49, 0x5b23715a},
+    {&XCVR_TSM->TIMING50, 0x5b2bffff},
+    {&XCVR_TSM->TIMING51, 0x5b2bffff},
+    {&XCVR_TSM->TIMING52, 0xffffffff},
+    {&XCVR_TSM->WU_LATENCY, 0x00060006},
+    {&XCVR_TX_DIG->DATARATE_CONFIG_FILTER_CTRL, 0x00010000},
+    {&XCVR_TX_DIG->DATARATE_CONFIG_FSK_CTRL, 0x08001800},
+    {&XCVR_TX_DIG->DATARATE_CONFIG_GFSK_CTRL, 0x00000804},
+    {&XCVR_TX_DIG->DATA_PADDING_CTRL, 0x00001012},
+    {&XCVR_TX_DIG->DATA_PADDING_CTRL_1, 0x00001600},
+    {&XCVR_TX_DIG->DATA_PADDING_CTRL_2, 0x08001800},
+    {&XCVR_TX_DIG->FSK_CTRL, 0x04001c00},
+    {&XCVR_TX_DIG->GFSK_COEFF_0_1, 0x00040001},
+    {&XCVR_TX_DIG->GFSK_COEFF_2_3, 0x0028000d},
+    {&XCVR_TX_DIG->GFSK_COEFF_4_5, 0x00c00063},
+    {&XCVR_TX_DIG->GFSK_COEFF_6_7, 0x0176012c},
+    {&XCVR_TX_DIG->GFSK_CTRL, 0x000003fd},
+    {&XCVR_TX_DIG->IMAGE_FILTER_CTRL, 0x00000000},
+    {&XCVR_TX_DIG->PA_CTRL, 0x00020126},
+    {&XCVR_TX_DIG->PA_RAMP_TBL0, 0x06040201},
+    {&XCVR_TX_DIG->PA_RAMP_TBL1, 0x14100c09},
+    {&XCVR_TX_DIG->PA_RAMP_TBL2, 0x26211c18},
+    {&XCVR_TX_DIG->PA_RAMP_TBL3, 0x3c38322c},
+    {&XCVR_TX_DIG->SWITCH_TX_CTRL, 0x00000000},
+    {&XCVR_TX_DIG->TXDIG_CTRL, 0x00000007},
+    {&XCVR_2P4GHZ_PHY->DMD_CTRL1, 0x8c049008},
+    {&RBME->CRCW_CFG, 0x00000001},
+    {&RBME->CRCW_CFG2, 0x00000000},
+    {&RBME->CRCW_CFG3, 0x00000403},
+    {&RBME->CRC_INIT, 0x55555500},
+    {&RBME->CRC_PHR_SZ, 0x00000002},
+    {&RBME->CRC_POLY, 0x00065b00},
+    {&RBME->CRC_XOR_OUT, 0x00000000},
+    {&RBME->FCP_CFG, 0x00000000},
+    {&RBME->FEC_BSZ_OV_B4SP, 0x00000000},
+    {&RBME->FEC_CFG1, 0x00000000},
+    {&RBME->FEC_CFG2, 0x00000000},
+    {&RBME->FRAME_OVER_SZ, 0x00000000},
+    {&RBME->NPAYL_OVER_SZ, 0x00000000},
+    {&RBME->PKT_SZ, 0x00244000},
+    {&RBME->SPREAD_CFG, 0x00000000},
+    {&RBME->WHITEN_CFG, 0x00410705},
+    {&RBME->WHITEN_POLY, 0x00000004},
+    {&RBME->WHITEN_SZ_THR, 0x00000000},
+};

tutorials/nxp/frdm-mcxw71/minimal/link.ld

@@ -0,0 +1,38 @@
+/* MCXW716C memory map, see MCUXpresso SDK gcc/mcxw716_flash.ld */
+ENTRY(Reset_Handler);
+MEMORY {
+  flash(rx)  : ORIGIN = 0x00000000, LENGTH = 512k  /* Upper half: OTA staging */
+  sram(rwx)  : ORIGIN = 0x20000000, LENGTH = 112k
+}
+__StackTop = ORIGIN(sram) + LENGTH(sram);  /* Stack points here */
+__StackLimit = __StackTop - 8192;          /* MSPLIM, see startup */
+
+SECTIONS {
+  .vectors  : { KEEP(*(.isr_vector)) . = ALIGN(4); } > flash
+  .text     : { *(.text* .text.*) } > flash
+  .rodata   : { *(.rodata*) . = ALIGN(4); } > flash
+
+  .data : {
+    __data_start__ = .;
+    _sdata = .;
+    *(.first_data)
+    *(.iram .iram.*)  /* OTA flash operations, copied to RAM by startup */
+    *(.data SORT(.data.*))
+    . = ALIGN(4);
+    __data_end__ = .;
+    _edata = .;
+  } > sram AT > flash
+  __etext = LOADADDR(.data);  /* Startup copies .data from here */
+
+  .bss : {
+    __bss_start__ = .;
+    _sbss = .;
+    *(.bss SORT(.bss.*) COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+    _ebss = .;
+  } > sram
+
+  . = ALIGN(8);
+  _end = .;  /* Start of heap, see _sbrk() in hal.c */
+}

tutorials/nxp/frdm-mcxw71/minimal/main.c

@@ -0,0 +1,95 @@
+// Copyright (c) 2026 Cesanta Software Limited
+// All rights reserved
+//
+// IPv4 over IEEE 802.15.4 on FRDM-MCXW71, Mongoose built-in TCP/IP stack.
+// The radio carries Ethernet frames, channel 15, PAN ID 0xabcd. With the
+// FRDM-RW612 eth_radio_bridge tutorial, gets an address from the LAN's DHCP
+// server and is reachable from the LAN. Serves pages on ports 80 and 443
+
+#include "hal.h"
+#include "mongoose.h"
+
+#define UART_DEBUG LPUART1  // MCU-Link USB serial port
+
+static void log_fn(char ch, void *param) {
+  hal_uart_write_buf(param, &ch, 1);
+}
+
+uint64_t mg_millis(void) {
+  return hal_get_tick();
+}
+
+// Self-signed P-256 certificate and key for the HTTPS listener. Created by:
+//   openssl ecparam -genkey -name prime256v1 -noout -out key.pem
+//   openssl req -x509 -key key.pem -out cert.pem -days 3650 -subj /CN=mg
+#define TLS_CERT                                                       \
+  "-----BEGIN CERTIFICATE-----\n"                                      \
+  "MIIBgjCCASegAwIBAgIUIJOq77Qn7lHbH6WseMemeqorR50wCgYIKoZIzj0EAwIw\n" \
+  "FjEUMBIGA1UEAwwLbnVjbGVvLWg3MjMwHhcNMjYxMDEyMTUwMjE5WhcNMzYxMDA5\n" \
+  "MTUwMjE5WjAWMRQwEgYDVQQDDAtudWNsZW8taDcyMzBZMBMGByqGSM49AgEGCCqG\n" \
+  "SM49AwEHA0IABB6IQJNmzrsdQL+2BnZYS7GYOaj7sz8f6cjBmz3n8D9Em19XodlU\n" \
+  "uy4ybIvyhr766lL0ERoTmMUivb/lGmzx9C+jUzBRMB0GA1UdDgQWBBQqxMuc4gj7\n" \
+  "MTMzreWlRMNI3QMqTzAfBgNVHSMEGDAWgBQqxMuc4gj7MTMzreWlRMNI3QMqTzAP\n" \
+  "BgNVHRMBAf8EBTADAQH/MAoGCCqGSM49BAMCA0kAMEYCIQDY4xaJpuxq6b3rHK3b\n" \
+  "lOIQyfkQX+orCRqQUkseplqpqwIhAKswZFNn+2zUNRRNY8+cHmdIwmdpsmxtoWYP\n" \
+  "BCjX++LI\n"                                                         \
+  "-----END CERTIFICATE-----\n"
+
+#define TLS_KEY                                                        \
+  "-----BEGIN EC PRIVATE KEY-----\n"                                   \
+  "MHcCAQEEIJ/GBl0TlD52q9PMg1KWaNIdXqp8b/HyIsABmBpqC+O1oAoGCCqGSM49\n" \
+  "AwEHoUQDQgAEHohAk2bOux1Av7YGdlhLsZg5qPuzPx/pyMGbPefwP0SbX1eh2VS7\n" \
+  "LjJsi/KGvvrqUvQRGhOYxSK9v+UabPH0Lw==\n"                             \
+  "-----END EC PRIVATE KEY-----\n"
+
+static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
+  if (ev == MG_EV_ACCEPT && c->is_tls) {  // Accepted on the https:// listener
+    struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
+                               .key = mg_str(TLS_KEY)};
+    mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {
+      mg_http_reply(c, 200, "", "{%m:%llu}\n", MG_ESC("tick"), hal_get_tick());
+    } else if (mg_match(hm->uri, mg_str("/api/crash"), NULL)) {
+      __asm volatile("udf #0");  // Trigger HardFault
+    } else {
+      mg_http_reply(c, 200, "",
+                    "Hi from Mongoose!\n"
+                    "tick:     %llu\n"
+                    "ram used: %zu\n"
+                    "ram free: %zu\n",
+                    hal_get_tick(), hal_ram_used(), hal_ram_free());
+    }
+  }
+}
+
+int main(void) {
+  hal_clock_init();
+  hal_uart_init(UART_DEBUG, 115200);
+  mg_log_set_fn(log_fn, UART_DEBUG);
+
+  if (!hal_radio_init()) MG_ERROR(("Radio init failed"));
+
+  struct mg_mgr mgr;
+  mg_mgr_init(&mgr);
+  mg_http_listen(&mgr, "http://0.0.0.0:80", http_ev_handler, NULL);
+  mg_http_listen(&mgr, "https://0.0.0.0:443", http_ev_handler, NULL);
+  mg_mqtt_init(&mgr);
+
+  MG_INFO(("Initialised. CPU clock: %lu MHz", SystemCoreClock / 1000000));
+  MG_INFO(("RAM used: %zu, free: %zu", hal_ram_used(), hal_ram_free()));
+  MG_INFO(("Crash record: %M", mg_print_crash_record));
+
+  for (;;) {
+    mg_mgr_poll(&mgr, 0);
+    mg_mqtt_poll(&mgr);
+  }
+
+  return 0;
+}

tutorials/nxp/frdm-mcxw71/minimal/mongoose_config.h

@@ -0,0 +1,23 @@
+#pragma once
+#include "MCXW716C.h"
+
+// See https://mongoose.ws/docs/getting-started/build-environment/
+#define MG_ARCH MG_ARCH_ARMGCC
+#define MG_TLS MG_TLS_BUILTIN
+#define MG_OTA MG_OTA_MCXW71
+
+#define MG_ENABLE_TCPIP 1
+#define MG_ENABLE_DRIVER_MCXW71 1
+#define MG_ENABLE_CUSTOM_MILLIS 1
+#define MG_ENABLE_CUSTOM_RANDOM 1
+#define MG_ENABLE_TCPIP_TCPRTX 1  // Link can be lossy, enable retransmit
+
+// Stable MAC, so the DHCP address stays the same across reboots: a hash of
+// the 128-bit chip unique ID, MSCM UID, locally administered
+#define MG_SET_MAC_ADDRESS(mac)                                         \
+  do {                                                                  \
+    uint8_t b_[32];                                                     \
+    mg_sha256(b_, (uint8_t *) MSCM->UID, sizeof(MSCM->UID));            \
+    (mac)[0] = 2, (mac)[1] = b_[1], (mac)[2] = b_[2], (mac)[3] = b_[3]; \
+    (mac)[4] = b_[4], (mac)[5] = b_[5];                                 \
+  } while (0)

tutorials/nxp/frdm-rw612/eth_radio_bridge/Makefile

@@ -0,0 +1,63 @@
+# Environment setup: https://mongoose.ws/documentation/tutorials/tools/
+
+MGDIR = ../../../..
+
+CFLAGS  = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion
+CFLAGS += -Wformat-truncation -fno-common -Wno-conversion -Wno-sign-conversion
+CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
+CFLAGS += -Wno-cast-function-type -Wno-old-style-declaration
+CFLAGS += -Wno-unused-parameter
+CFLAGS += -I. -I$(MGDIR) -Imongoose -Icmsis_core/CMSIS/Core/Include/
+CFLAGS += $(addprefix -Icmsis_rw612/devices/RW612/drivers/romapi/,bootloader nboot otp iap flexspi)
+CFLAGS += -Icmsis_rw612/devices/RW612/ -Icmsis_rw612/devices/RW612/periph/ -Icmsis_rw612/devices/RW612/drivers/
+CFLAGS += -DCPU_RW612ETA2I -DCPU_RW612ETA2I_cm33_no_dsp
+CFLAGS += -DBOOT_HEADER_ENABLE=1
+CFLAGS += -DRADIO_FW='"$(RADIO_FW)"'
+CFLAGS += -mcpu=cortex-m33+nodsp -mthumb -mfloat-abi=hard -mfpu=fpv5-sp-d16 $(CFLAGS_EXTRA)
+LDFLAGS ?= -Tlink.ld -nostdlib -nostartfiles --specs=nano.specs -lc -lgcc -Wl,--gc-sections
+
+SOURCES = main.c hal.c radio.c startup.c flexspi.c flash_config.c $(MGDIR)/mongoose.c
+SOURCES += cmsis_rw612/devices/RW612/drivers/fsl_clock.c
+SOURCES += cmsis_rw612/devices/RW612/drivers/fsl_trng.c
+SOURCES += cmsis_rw612/devices/RW612/drivers/fsl_reset.c
+SOURCES += $(addprefix cmsis_rw612/devices/RW612/drivers/,fsl_power.c fsl_ocotp.c \
+  romapi/bootloader/fsl_romapi.c romapi/nboot/fsl_romapi_nboot.c romapi/otp/fsl_romapi_otp.c)
+
+# NXP BLE/802.15.4 combo firmware for CPU2, linked into our image. NXP license:
+# https://github.com/NXP/wifi_nb_fw/blob/nxp-v4.4.3/LICENSE.txt
+RADIO_FW = rw61x_sb_ble_15d4_combo_a2.bin
+RADIO_FW_URL = https://github.com/NXP/wifi_nb_fw/raw/nxp-v4.4.3/rw61x/$(RADIO_FW)
+RADIO_FW_SHA256 = 2efac0d771e371377d57159c40f0909c7ecc6f6b950ce69ed2a3e02ac7eb686a
+
+all build: firmware.bin
+
+firmware.bin: firmware.elf
+	arm-none-eabi-objcopy -O binary $< $@
+	arm-none-eabi-size --format=berkeley $<
+
+firmware.elf: cmsis_core cmsis_rw612 $(RADIO_FW) $(SOURCES) $(wildcard *.h) link.ld Makefile mongoose_config.h
+	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@
+
+cmsis_core:
+	git clone -q -c advice.detachedHead=false --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
+
+$(RADIO_FW):
+	curl -sL $(RADIO_FW_URL) -o $@.tmp
+	echo "$(RADIO_FW_SHA256)  $@.tmp" | shasum -a 256 -c - >/dev/null
+	mv $@.tmp $@
+
+cmsis_rw612:
+	curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.RW612_DFP.25.12.00.pack -o NXP.RW612_DFP.25.12.00.pack
+	unzip -q NXP.RW612_DFP.25.12.00.pack -d $@
+	rm NXP.RW612_DFP.25.12.00.pack
+
+# Show all symbols sorted by size
+show_symbols_sorted_by_size: firmware.bin
+	arm-none-eabi-readelf -sW firmware.elf | sed 1,3d | sed 's,^.*: ,,' | tr -s ' ' | cut -d ' ' -f 2,7 | sort -nk1 | grep -v '^0 '
+
+flash: firmware.bin
+	(echo 'loadfile firmware.elf'; echo 'reset'; echo 'exit';) | JLinkExe -device RW612 -if SWD -speed 4000 -autoconnect 1 -NoGui 1 -ExitOnError 1
+#	JRun --nogui --device RW612 --if SWD firmware.elf
+
+clean:
+	rm -rf firmware.* cmsis_* mongoose/mongoose.* $(RADIO_FW)

tutorials/nxp/frdm-rw612/eth_radio_bridge/flash_config.c

@@ -0,0 +1,86 @@
+/*
+ * Copyright 2021-2024 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include "flash_config.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.flash_config"
+#endif
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+#if defined(BOOT_HEADER_ENABLE) && (BOOT_HEADER_ENABLE == 1)
+#if defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".flash_conf"), used))
+#elif defined(__ICCARM__)
+#pragma location = ".flash_conf"
+#endif
+const fc_flexspi_nor_config_t flexspi_config = {
+    .memConfig =
+        {
+            .tag                 = FC_BLOCK_TAG,
+            .version             = FC_BLOCK_VERSION,
+            .readSampleClkSrc    = 1,
+            .csHoldTime          = 3,
+            .csSetupTime         = 3,
+            .deviceModeCfgEnable = 1,
+            .deviceModeSeq       = {.seqNum = 1, .seqId = 2},
+            .deviceModeArg       = 0x02,
+            .configCmdEnable     = 0,
+            .deviceType          = 0x1,
+            .sflashPadType       = kSerialFlash_4Pads,
+            .serialClkFreq       = 5,
+            .sflashA1Size        = 0x4000000U,
+            .sflashA2Size        = 0,
+            .sflashB1Size        = 0,
+            .sflashB2Size        = 0,
+            .lookupTable =
+                {
+                    /* Read */
+                    [0] = FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0xEC, FC_RADDR_SDR, FC_FLEXSPI_4PAD, 0x20),
+                    [1] = FC_FLEXSPI_LUT_SEQ(FC_MODE8_SDR, FC_FLEXSPI_4PAD, 0xF0, FC_DUMMY_SDR, FC_FLEXSPI_4PAD, 0x04),
+                    [2] = FC_FLEXSPI_LUT_SEQ(FC_READ_SDR, FC_FLEXSPI_4PAD, 0x04, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+
+                    /* Read Status */
+                    [4 * 1 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x05, FC_READ_SDR, FC_FLEXSPI_1PAD, 0x04),
+
+                    /* Write Status */
+                    [4 * 2 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x31, FC_WRITE_SDR, FC_FLEXSPI_1PAD, 0x01),
+
+                    /* Write Enable */
+                    [4 * 3 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x06, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+
+                    /* Sector erase */
+                    [4 * 5 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x21, FC_RADDR_SDR, FC_FLEXSPI_1PAD, 0x20),
+
+                    /* Block erase */
+                    [4 * 8 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0xDC, FC_RADDR_SDR, FC_FLEXSPI_1PAD, 0x20),
+
+                    /* Page program */
+                    [4 * 9 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0x34, FC_RADDR_SDR, FC_FLEXSPI_1PAD, 0x20),
+                    [4 * 9 + 1] =
+                        FC_FLEXSPI_LUT_SEQ(FC_WRITE_SDR, FC_FLEXSPI_4PAD, 0x00, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+
+                    /* chip erase */
+                    [4 * 11 + 0] =
+                        FC_FLEXSPI_LUT_SEQ(FC_CMD_SDR, FC_FLEXSPI_1PAD, 0xC7, FC_STOP_EXE, FC_FLEXSPI_1PAD, 0x00),
+                },
+        },
+    .pageSize           = 0x100,
+    .sectorSize         = 0x1000,
+    .ipcmdSerialClkFreq = 0,
+    .blockSize          = 0x10000,
+    .fcb_fill[0]        = 0xFFFFFFFF,
+};
+#endif /* BOOT_HEADER_ENABLE */

tutorials/nxp/frdm-rw612/eth_radio_bridge/flash_config.h

@@ -0,0 +1,221 @@
+/*
+ * Copyright 2021-2023 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __FLASH_CONFIG__
+#define __FLASH_CONFIG__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_common.h"
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief FLASH_CONFIG driver version 2.0.0. */
+#define FSL_FLASH_CONFIG_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
+/*@}*/
+
+/*******************************************************************************
+ * Definition
+ ******************************************************************************/
+
+/* FLEXSPI memory config block related defintions */
+#define FC_BLOCK_TAG     (0x42464346)
+#define FC_BLOCK_VERSION (0x00000000)
+
+#define FC_CMD_SDR        0x01
+#define FC_CMD_DDR        0x21
+#define FC_RADDR_SDR      0x02
+#define FC_RADDR_DDR      0x22
+#define FC_CADDR_SDR      0x03
+#define FC_CADDR_DDR      0x23
+#define FC_MODE1_SDR      0x04
+#define FC_MODE1_DDR      0x24
+#define FC_MODE2_SDR      0x05
+#define FC_MODE2_DDR      0x25
+#define FC_MODE4_SDR      0x06
+#define FC_MODE4_DDR      0x26
+#define FC_MODE8_SDR      0x07
+#define FC_MODE8_DDR      0x27
+#define FC_WRITE_SDR      0x08
+#define FC_WRITE_DDR      0x28
+#define FC_READ_SDR       0x09
+#define FC_READ_DDR       0x29
+#define FC_LEARN_SDR      0x0A
+#define FC_LEARN_DDR      0x2A
+#define FC_DATSZ_SDR      0x0B
+#define FC_DATSZ_DDR      0x2B
+#define FC_DUMMY_SDR      0x0C
+#define FC_DUMMY_DDR      0x2C
+#define FC_DUMMY_RWDS_SDR 0x0D
+#define FC_DUMMY_RWDS_DDR 0x2D
+#define FC_JMP_ON_CS      0x1F
+#define FC_STOP_EXE       0
+
+#define FC_FLEXSPI_1PAD 0
+#define FC_FLEXSPI_2PAD 1
+#define FC_FLEXSPI_4PAD 2
+#define FC_FLEXSPI_8PAD 3
+
+#define FC_FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)                                                           \
+    (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
+     FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
+
+/* !@brief Data pad used in Read command */
+enum
+{
+    kSerialFlash_1Pads = 1,
+    kSerialFlash_2Pads = 2,
+    kSerialFlash_4Pads = 4,
+    kSerialFlash_8Pads = 8,
+};
+
+/* !@brief FLEXSPI clock configuration - In High speed boot mode mode */
+enum
+{
+    kFlexSpiSerialClk_30MHz  = 1,
+    kFlexSpiSerialClk_50MHz  = 2,
+    kFlexSpiSerialClk_60MHz  = 3,
+    kFlexSpiSerialClk_80MHz  = 4,
+    kFlexSpiSerialClk_100MHz = 5,
+    kFlexSpiSerialClk_120MHz = 6,
+    kFlexSpiSerialClk_133MHz = 7,
+    kFlexSpiSerialClk_166MHz = 8,
+    kFlexSpiSerialClk_200MHz = 9,
+};
+
+/* !@brief FLEXSPI clock configuration - In Normal boot SDR mode */
+enum
+{
+    kFlexSpiSerialClk_SDR_24MHz = 1,
+    kFlexSpiSerialClk_SDR_48MHz = 2,
+};
+
+/* !@brief FLEXSPI clock configuration - In Normal boot DDR mode */
+enum
+{
+    kFlexSpiSerialClk_DDR_48MHz = 1,
+};
+
+/* !@brief Misc feature bit definitions */
+enum
+{
+    kFlexSpiMiscOffset_DiffClkEnable         = 0, /* !< Bit for Differential clock enable */
+    kFlexSpiMiscOffset_WordAddressableEnable = 3, /* !< Bit for Word Addressable enable */
+    kFlexSpiMiscOffset_SafeConfigFreqEnable  = 4, /* !< Bit for Safe Configuration Frequency enable */
+    kFlexSpiMiscOffset_DdrModeEnable         = 6, /* !< Bit for DDR clock confiuration indication. */
+};
+
+/* !@brief Flash Configuration Command Type */
+enum
+{
+    kDeviceConfigCmdType_Generic,    /* !< Generic command, for example: configure dummy cycles, drive strength, etc */
+    kDeviceConfigCmdType_QuadEnable, /* !< Quad Enable command */
+    kDeviceConfigCmdType_Spi2Xpi,    /* !< Switch from SPI to DPI/QPI/OPI mode */
+    kDeviceConfigCmdType_Xpi2Spi,    /* !< Switch from DPI/QPI/OPI to SPI mode */
+    kDeviceConfigCmdType_Spi2NoCmd,  /* !< Switch to 0-4-4/0-8-8 mode */
+    kDeviceConfigCmdType_Reset,      /* !< Reset device command */
+};
+
+typedef struct _fc_flexspi_dll_time
+{
+    uint8_t time_100ps;  /* !< Data valid time, in terms of 100ps */
+    uint8_t delay_cells; /* !< Data valid time, in terms of delay cells */
+} fc_flexspi_dll_time_t;
+
+/* !@brief FlexSPI LUT Sequence structure */
+typedef struct _fc_flexspi_lut_seq
+{
+    uint8_t seqNum; /* !< Sequence Number, valid number: 1-16 */
+    uint8_t seqId;  /* !< Sequence Index, valid number: 0-15 */
+    uint16_t reserved;
+} fc_flexspi_lut_seq_t;
+
+/* !@brief FlexSPI Memory Configuration Block */
+typedef struct _fc_flexspi_mem_config
+{
+    uint32_t tag;       /* !< [0x000-0x003] Tag, fixed value 0x42464346UL */
+    uint32_t version;   /* !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix */
+    uint32_t reserved0; /* !< [0x008-0x00b] Reserved for future use */
+    uint8_t readSampleClkSrc;    /* !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 */
+    uint8_t csHoldTime;          /* !< [0x00d-0x00d] CS hold time, default value: 3 */
+    uint8_t csSetupTime;         /* !< [0x00e-0x00e] CS setup time, default value: 3 */
+    uint8_t columnAddressWidth;  /* !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
+       Serial NAND, need to refer to datasheet */
+    uint8_t deviceModeCfgEnable; /* !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable */
+    uint8_t deviceModeType; /* !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
+     Generic configuration, etc. */
+    uint16_t waitTimeCfgCommands; /* !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
+     DPI/QPI/OPI switch or reset command */
+    fc_flexspi_lut_seq_t deviceModeSeq; /* !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] -
+     LUt sequence number, [31:16] Reserved */
+    uint32_t deviceModeArg;             /* !< [0x018-0x01b] Argument/Parameter for device configuration */
+    uint8_t configCmdEnable;            /* !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable */
+    uint8_t configModeType[3];          /* !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe */
+    fc_flexspi_lut_seq_t configCmdSeqs[3]; /* !< [0x020-0x02b] Sequence info for Device Configuration command, similar
+                                           as deviceModeSeq */
+    uint32_t reserved1;                    /* !< [0x02c-0x02f] Reserved for future use */
+    uint32_t configCmdArgs[3];             /* !< [0x030-0x03b] Arguments/Parameters for device Configuration commands */
+    uint32_t reserved2;                    /* !< [0x03c-0x03f] Reserved for future use */
+    uint32_t controllerMiscOption; /* !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for
+      more details */
+    uint8_t deviceType;            /* !< [0x044-0x044] Device Type:  See Flash Type Definition for more details */
+    uint8_t sflashPadType; /* !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal */
+    uint8_t serialClkFreq; /* !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+     Chapter for more details */
+    uint8_t lutCustomSeqEnable; /* !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
+     be done using 1 LUT sequence, currently, only applicable to HyperFLASH */
+    uint32_t reserved3[2];      /* !< [0x048-0x04f] Reserved for future use */
+    uint32_t sflashA1Size;      /* !< [0x050-0x053] Size of Flash connected to A1 */
+    uint32_t sflashA2Size;      /* !< [0x054-0x057] Size of Flash connected to A2 */
+    uint32_t sflashB1Size;      /* !< [0x058-0x05b] Size of Flash connected to B1 */
+    uint32_t sflashB2Size;      /* !< [0x05c-0x05f] Size of Flash connected to B2 */
+    uint32_t csPadSettingOverride;          /* !< [0x060-0x063] CS pad setting override value */
+    uint32_t sclkPadSettingOverride;        /* !< [0x064-0x067] SCK pad setting override value */
+    uint32_t dataPadSettingOverride;        /* !< [0x068-0x06b] data pad setting override value */
+    uint32_t dqsPadSettingOverride;         /* !< [0x06c-0x06f] DQS pad setting override value */
+    uint32_t timeoutInMs;                   /* !< [0x070-0x073] Timeout threshold for read status command */
+    uint32_t commandInterval;               /* !< [0x074-0x077] CS deselect interval between two commands */
+    fc_flexspi_dll_time_t dataValidTime[2]; /* !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B */
+    uint16_t busyOffset;                    /* !< [0x07c-0x07d] Busy offset, valid value: 0-31 */
+    uint16_t busyBitPolarity; /* !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
+     busy flag is 0 when flash device is busy */
+    uint32_t lookupTable[64]; /* !< [0x080-0x17f] Lookup table holds Flash command sequences */
+    fc_flexspi_lut_seq_t lutCustomSeq[12]; /* !< [0x180-0x1af] Customizable LUT Sequences */
+    uint32_t reserved4[4];                 /* !< [0x1b0-0x1bf] Reserved for future use */
+} fc_flexspi_mem_config_t;
+/*
+ *  Serial NOR configuration block
+ */
+typedef struct _fc_flexspi_nor_config
+{
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+    uint8_t padding[0x400];            /* !< Padding for MDK and IAR */
+#endif
+    fc_flexspi_mem_config_t memConfig; /* !< Common memory configuration info via FlexSPI */
+    uint32_t pageSize;                 /* !< Page size of Serial NOR */
+    uint32_t sectorSize;               /* !< Sector size of Serial NOR */
+    uint8_t ipcmdSerialClkFreq;        /* !< Clock frequency for IP command */
+    uint8_t isUniformBlockSize;        /* !< Sector/Block size is the same */
+    uint8_t isDataOrderSwapped;        /* !< Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2) */
+    uint8_t reserved0[1];              /* !< Reserved for future use */
+    uint8_t serialNorType;             /* !< Serial NOR Flash type: 0/1/2/3 */
+    uint8_t needExitNoCmdMode;         /* !< Need to exit NoCmd mode before other IP command */
+    uint8_t halfClkForNonReadCmd;      /* !< Half the Serial Clock for non-read command: true/false */
+    uint8_t needRestoreNoCmdMode;      /* !< Need to Restore NoCmd mode after IP commmand execution */
+    uint32_t blockSize;                /* !< Block size */
+    uint32_t flashStateCtx;            /* !< Flash State Context */
+    uint32_t reserve2[10];             /* !< Reserved for future use */
+    uint32_t fcb_fill[0x280];          /* !< Fill */
+} fc_flexspi_nor_config_t;
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __FLASH_CONFIG__ */

tutorials/nxp/frdm-rw612/eth_radio_bridge/flexspi.c

@@ -0,0 +1,82 @@
+#include "RW612.h"
+#include "fsl_flexspi.h" // peripheral structures
+
+__attribute__((section(".iram"))) static void deinit_flash(FLEXSPI_Type *base) {
+  CLKCTL0->PSCCTL0_SET =
+      CLKCTL0_PSCCTL0_SET_FLEXSPI0_MASK; // Enable FLEXSPI clock again
+  base->MCR0 &= ~FLEXSPI_MCR0_MDIS_MASK; // Enable FLEXSPI module
+  // Wait until FLEXSPI is not busy
+  while (!((base->STS0 & FLEXSPI_STS0_ARBIDLE_MASK) &&
+           (base->STS0 & FLEXSPI_STS0_SEQIDLE_MASK)))
+    (void)0;
+  base->MCR0 |=
+      FLEXSPI_MCR0_MDIS_MASK; // Disable module during the reset procedure
+}
+
+__attribute__((section(".iram"))) static void init_flash(FLEXSPI_Type *base) {
+  uint32_t status;
+  uint32_t lastStatus;
+  uint32_t retry;
+
+  // Loopback from DQS pad can maximize RD board flash speed.
+  if ((base->MCR0 & FLEXSPI_MCR0_RXCLKSRC_MASK) != FLEXSPI_MCR0_RXCLKSRC(1)) {
+    base->MCR0 =
+        (base->MCR0 & ~FLEXSPI_MCR0_RXCLKSRC_MASK) | FLEXSPI_MCR0_RXCLKSRC(1);
+  }
+  base->DLLCR[0] = 0x1U;
+  base->MCR0 &= ~FLEXSPI_MCR0_MDIS_MASK; // Enable FLEXSPI module
+  base->MCR0 |= FLEXSPI_MCR0_SWRESET_MASK;
+  while (base->MCR0 & FLEXSPI_MCR0_SWRESET_MASK)
+    (void)0;
+
+  // Need to wait DLL locked if DLL enabled
+  if (0U != (base->DLLCR[0] & FLEXSPI_DLLCR_DLLEN_MASK)) {
+    lastStatus = base->STS2;
+    retry = 10;
+    // Wait slave delay line locked and slave reference delay line locked.
+    do {
+      status = base->STS2;
+      if ((status &
+           (FLEXSPI_STS2_AREFLOCK_MASK | FLEXSPI_STS2_ASLVLOCK_MASK)) ==
+          (FLEXSPI_STS2_AREFLOCK_MASK | FLEXSPI_STS2_ASLVLOCK_MASK)) {
+        // Locked
+        retry = 100;
+        break;
+      } else if (status == lastStatus) {
+        retry--;
+      } else {
+        retry = 10;
+        lastStatus = status;
+      }
+    } while (retry > 0);
+    // According to ERR011377, need to delay at least 100 NOPs to ensure the DLL
+    // is locked
+    for (; retry > 0U; retry--)
+      (void)0;
+  }
+}
+
+__attribute__((section(".iram"))) void
+set_flexspi_clock(FLEXSPI_Type *base, uint32_t src, uint32_t divider) {
+  if ((CLKCTL0->FLEXSPIFCLKSEL != CLKCTL0_FLEXSPIFCLKSEL_SEL(src)) ||
+      ((CLKCTL0->FLEXSPIFCLKDIV & CLKCTL0_FLEXSPIFCLKDIV_DIV_MASK) !=
+       (divider - 1))) {
+    // Always deinit FLEXSPI and init FLEXSPI for the flash to make sure the
+    // flash works correctly after the FLEXSPI root clock changed as the default
+    //  FLEXSPI configuration may does not work for the new root clock frequency.
+    deinit_flash(base);
+
+    // Disable clock before changing clock source
+    CLKCTL0->PSCCTL0_CLR = CLKCTL0_PSCCTL0_CLR_FLEXSPI0_MASK;
+    // Update flexspi clock.
+    CLKCTL0->FLEXSPIFCLKSEL = CLKCTL0_FLEXSPIFCLKSEL_SEL(src);
+    CLKCTL0->FLEXSPIFCLKDIV |=
+        CLKCTL0_FLEXSPIFCLKDIV_RESET_MASK; // Reset the divider counter
+    CLKCTL0->FLEXSPIFCLKDIV = CLKCTL0_FLEXSPIFCLKDIV_DIV(divider - 1);
+    while ((CLKCTL0->FLEXSPIFCLKDIV) & CLKCTL0_FLEXSPIFCLKDIV_REQFLAG_MASK)
+      (void)0;
+    // Enable FLEXSPI clock again
+    CLKCTL0->PSCCTL0_SET = CLKCTL0_PSCCTL0_SET_FLEXSPI0_MASK;
+    init_flash(base);
+  }
+}

tutorials/nxp/frdm-rw612/eth_radio_bridge/hal.c

@@ -0,0 +1,133 @@
+// Copyright (c) 2026 Cesanta Software Limited
+// All rights reserved
+
+#include "hal.h"
+
+// Added to minimise the bin size: avoid pulling printf and friends
+void __assert_func(const char *s, int line, const char *fn, const char *expr) {
+  (void) s, (void) line, (void) fn, (void) expr;
+  for (;;) (void) 0;  // or trigger the fault handler
+}
+
+bool hal_timer_expired(volatile uint64_t *t, uint64_t period, uint64_t now) {
+  uint64_t diff = now - *t;         // Wrap-safe elapsed time since last expiry
+  if (period == 0) return false;    // Avoid division by zero
+  if (diff < period) return false;  // Period has not elapsed yet
+  *t += (diff / period) * period;   // Preserve cadence, skip missed periods
+  return true;
+}
+
+static volatile uint64_t s_ticks;  // Milliseconds since boot
+void SysTick_Handler(void) {       // SyStick IRQ handler, triggered every 1ms
+  s_ticks++;
+}
+
+uint64_t hal_get_tick(void) {
+  return s_ticks;
+};
+
+uint32_t SystemCoreClock = SYS_FREQUENCY;
+int hal_radio_err;      // Result of hal_radio_init()
+void SystemInit(void) {  // Called automatically by startup code
+  hal_system_init();     // Enable FPU
+  hal_radio_err = hal_radio_init();  // At the boot clock, see radio.c
+  hal_clock_init();
+  SysTick_Config(SystemCoreClock / 1000);  // Sys tick every 1ms
+}
+
+void ExitRun0Mode(void) {
+}
+
+struct stat;
+__attribute__((weak)) int _fstat(int fd, struct stat *st) {
+  (void) fd, (void) st;
+  return -1;
+}
+
+extern unsigned char _end[];  // End of data section, start of heap. See link.ld
+static unsigned char *s_current_heap_end = _end;
+
+size_t hal_ram_used(void) {
+  return (size_t) (s_current_heap_end - _end);
+}
+
+size_t hal_ram_free(void) {
+  unsigned char endofstack;
+  return (size_t) (&endofstack - s_current_heap_end);
+}
+
+void *_sbrk(int incr) {
+  unsigned char *prev_heap;
+  unsigned char *heap_end = (unsigned char *) ((size_t) &heap_end - 256);
+  prev_heap = s_current_heap_end;
+  // Check how much space we  got from the heap end to the stack end
+  if (s_current_heap_end + incr > heap_end) return (void *) -1;
+  s_current_heap_end += incr;
+  return prev_heap;
+}
+
+__attribute__((weak)) int _open(const char *path) {
+  (void) path;
+  return -1;
+}
+
+__attribute__((weak)) int _close(int fd) {
+  (void) fd;
+  return -1;
+}
+
+__attribute__((weak)) int _isatty(int fd) {
+  (void) fd;
+  return 1;
+}
+
+__attribute__((weak)) int _lseek(int fd, int ptr, int dir) {
+  (void) fd, (void) ptr, (void) dir;
+  return 0;
+}
+
+__attribute__((weak)) void _exit(int status) {
+  (void) status;
+  for (;;) asm volatile("BKPT #0");
+}
+
+__attribute__((weak)) void _kill(int pid, int sig) {
+  (void) pid, (void) sig;
+}
+
+__attribute__((weak)) int _getpid(void) {
+  return -1;
+}
+
+__attribute__((weak)) int _write(int fd, char *ptr, int len) {
+  (void) fd, (void) ptr, (void) len;
+  return -1;
+}
+
+__attribute__((weak)) int _read(int fd, char *ptr, int len) {
+  (void) fd, (void) ptr, (void) len;
+  return -1;
+}
+
+__attribute__((weak)) int _link(const char *a, const char *b) {
+  (void) a, (void) b;
+  return -1;
+}
+
+__attribute__((weak)) int _unlink(const char *a) {
+  (void) a;
+  return -1;
+}
+
+__attribute__((weak)) int _stat(const char *path, struct stat *st) {
+  (void) path, (void) st;
+  return -1;
+}
+
+__attribute__((weak)) int mkdir(const char *path, int mode) {
+  (void) path, (void) mode;
+  return -1;
+}
+
+__attribute__((weak)) void _init(void) {
+}

tutorials/nxp/frdm-rw612/eth_radio_bridge/hal.h

@@ -0,0 +1,366 @@
+// Copyright (c) 2023 Cesanta Software Limited
+// All rights reserved
+
+#pragma once
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "RW612.h"
+#include "fsl_clock.h"
+#include "fsl_ocotp.h"
+#include "fsl_power.h"
+#include "fsl_io_mux.h"
+#include "fsl_reset.h"
+#include "fsl_trng.h"
+
+int hal_radio_init(void);  // Start the 802.15.4 radio firmware. 0: success
+extern int hal_radio_err;  // hal_radio_init() result, called by SystemInit()
+
+#define BIT(x) (1UL << (x))
+#define CLRSET(reg, clear, set) ((reg) = ((reg) & ~(clear)) | (set))
+#define PIN(bank, num) ((bank << 8) | (num))
+#define PINNO(pin) (pin & 255)
+#define PINBANK(pin) (pin >> 8)
+
+void hal_init(void);
+size_t hal_ram_free(void);
+size_t hal_ram_used(void);
+bool hal_timer_expired(volatile uint64_t *t, uint64_t period, uint64_t now);
+uint64_t hal_get_tick(void);
+
+static inline void spin(volatile uint32_t count) {
+  while (count--)
+    (void)0;
+}
+
+#define SYS_FREQUENCY 260000000UL
+#define FRG_PLL_CLKDIV 13
+
+enum { HAL_GPIO_MODE_INPUT, HAL_GPIO_MODE_OUTPUT };
+enum {
+  HAL_GPIO_TYPE_NOPULL_WEAKEST = 0x0,
+  HAL_GPIO_TYPE_NOPULL_WEAK = 0x4,
+  HAL_GPIO_TYPE_NOPULL_STRONG = 0x8,
+  HAL_GPIO_TYPE_NOPULL_STRONGEST = 0xC,
+  HAL_GPIO_TYPE_PULLUP_WEAKEST = 0x1,
+  HAL_GPIO_TYPE_PULLUP_WEAK = 0x5,
+  HAL_GPIO_TYPE_PULLUP_STRONG = 0x9,
+  HAL_GPIO_TYPE_PULLUP_STRONGEST = 0xD,
+  HAL_GPIO_TYPE_PULLDOWN_WEAKEST = 0x2,
+  HAL_GPIO_TYPE_PULLDOWN_WEAK = 0x6,
+  HAL_GPIO_TYPE_PULLDOWN_STRONG = 0xA,
+  HAL_GPIO_TYPE_PULLDOWN_STRONGEST = 0xE,
+  HAL_GPIO_TYPE_NOPULL = HAL_GPIO_TYPE_NOPULL_STRONGEST,
+  HAL_GPIO_TYPE_PULLUP = HAL_GPIO_TYPE_PULLUP_STRONGEST,
+  HAL_GPIO_TYPE_PULLDOWN = HAL_GPIO_TYPE_PULLDOWN_STRONGEST,
+};
+
+// Wrapper structure over the IO_MUX_* macros in fsl_io_mux.h
+// To use those macros with our gpio functions,
+// wrap them inside this structure as shown in the example from the
+// ethernet_init function.
+typedef struct
+{
+  uint32_t pinLowMask, pinHighMask, gpioFcSetMask,
+  gpioFcClrMask, fselSetMask, fselClrMask, ctimerSetMask,
+  ctimerClrMask, sctimerSetMask, sctimerClrMask;
+} io_mux_config_t;
+
+static inline void hal_gpio_init(uint16_t pin, uint8_t mode, uint8_t type,
+                              io_mux_config_t *mux_config) {
+  uint8_t bank = PINBANK(pin);
+  uint8_t pin_no = PINNO(pin);
+  if (mode == HAL_GPIO_MODE_INPUT) {
+    GPIO->DIR[bank] &= ~(1 << pin_no);
+  } else {
+    GPIO->DIR[bank] |= (1 << pin_no);
+  }
+
+  // configure pull
+  pin_no += bank * 32;
+  uint32_t shift = (pin_no % 16) * 2;
+  uint32_t pull_val = (uint32_t)type & 3;
+  uint32_t drive_val = ((uint32_t)type >> 2) & 3;
+  volatile uint32_t *pull_reg, *drive_reg;
+  if (pin_no < 22 || pin_no > 27) {
+    pull_reg = &SOCCTRL->PAD_PU_PD_EN0 + pin_no / 16;
+    drive_reg = &SOCCTRL->SR_CONFIG0 + pin_no / 16;
+  } else {
+    pull_reg = &AON_SOC_CIU->PAD_PU_PD_EN1;
+    drive_reg = &AON_SOC_CIU->SR_CONFIG1;
+  }
+  *pull_reg = (*pull_reg & ~(3 << shift)) | (pull_val << shift);
+  *drive_reg = (*drive_reg & ~(3 << shift)) | (drive_val << shift);
+
+  if (mux_config) {
+    IO_MUX_SetPinMux(mux_config->pinLowMask, mux_config->pinHighMask,
+      mux_config->gpioFcSetMask, mux_config->gpioFcClrMask,
+      mux_config->fselSetMask, mux_config->fselClrMask,
+      mux_config->ctimerSetMask, mux_config->ctimerClrMask,
+      mux_config->sctimerSetMask, mux_config->sctimerClrMask
+    );
+  } else {
+    // if no mux config is specified, assume default gpio settings and
+    // no special function and just enable the IO
+    IO_MUX_SetPinMux(bank ? 0 : BIT(PINNO(pin)), !bank ? 0 : BIT(PINNO(pin)),
+                    1 << 16, 0, 0, 0, 0, 0, 0, 0);
+  }
+}
+
+static inline void hal_gpio_input(uint16_t pin) {
+  hal_gpio_init(pin, HAL_GPIO_MODE_INPUT, HAL_GPIO_TYPE_PULLUP_STRONGEST, NULL);
+}
+static inline void hal_gpio_output(uint16_t pin) {
+  hal_gpio_init(pin, HAL_GPIO_MODE_OUTPUT, HAL_GPIO_TYPE_NOPULL_STRONGEST, NULL);
+}
+
+static inline bool hal_gpio_read(uint16_t pin) {
+  return GPIO->PIN[PINBANK(pin)] & (1 << PINNO(pin));
+}
+
+static inline void hal_gpio_write(uint16_t pin, bool value) {
+  if (value) {
+    GPIO->SET[PINBANK(pin)] |= (1 << PINNO(pin));
+  } else {
+    GPIO->CLR[PINBANK(pin)] |= (1 << PINNO(pin));
+  }
+}
+
+static inline void hal_gpio_toggle(uint16_t pin) {
+  hal_gpio_read(pin) ? hal_gpio_write(pin, false) : hal_gpio_write(pin, true);
+}
+
+#if defined(__ZEPHYR__)
+#undef MG_HAL_DISABLE_SYSTEM_INIT
+#define MG_HAL_DISABLE_SYSTEM_INIT 1
+#undef MG_HAL_DISABLE_NEWLIB
+#define MG_HAL_DISABLE_NEWLIB 1
+#undef MG_HAL_DISABLE_CLOCK
+#define MG_HAL_DISABLE_CLOCK 1
+#undef MG_HAL_DISABLE_RANDOM
+#define MG_HAL_DISABLE_RANDOM 1
+#undef MG_HAL_DISABLE_MILLIS
+#define MG_HAL_DISABLE_MILLIS 1
+#undef MG_HAL_DISABLE_UART
+#define MG_HAL_DISABLE_UART 1
+#undef MG_HAL_DISABLE_ETHERNET
+#define MG_HAL_DISABLE_ETHERNET 1
+#undef MG_HAL_SYSTICK
+#define MG_HAL_SYSTICK MG_HAL_SYSTICK_NONE
+#endif
+
+static inline void hal_uart_init(USART_Type *uart, unsigned long baud) {
+  if (uart == USART0) {
+    IO_MUX_SetPinMux(IO_MUX_FC0_USART_DATA);
+  } else if (uart == USART1) {
+    IO_MUX_SetPinMux(IO_MUX_FC1_USART_DATA);
+  } else if (uart == USART2) {
+    IO_MUX_SetPinMux(IO_MUX_FC2_USART_DATA);
+  } else if (uart == USART3) {
+    IO_MUX_SetPinMux(IO_MUX_FC3_USART_DATA);
+  } else if (uart == USART14) {
+    IO_MUX_SetPinMux(IO_MUX_FC14_USART_DATA);
+  } else {
+    return;
+  }
+
+  uint32_t uart_index = ((uint32_t)uart - USART0_BASE) / 0x1000;
+
+  // set FRG clk
+  CLKCTL1->FLEXCOMM[uart_index].FRGCLKSEL = kCLOCK_FrgPllDiv;
+  CLKCTL1->FLEXCOMM[uart_index].FRGCTL =
+      (CLKCTL1_FRGCTL_MULT(0) | CLKCTL1_FRGCTL_DIV(255));
+  CLOCK_AttachClk(CLKCTL1_TUPLE_MUXA(0x508 + uart_index * 0x20, 4));
+
+  // set FLEXCOMM to USART mode
+  CLOCK_EnableClock(CLK_GATE_DEFINE(CLK_CTL1_PSCCTL0, uart_index + 8));
+  uint32_t mask = BIT(uart_index + 8);
+  RSTCTL1->PRSTCTL0_SET = mask;
+  while ((RSTCTL1->PRSTCTL0 & mask) == 0)
+    spin(1);
+  RSTCTL1->PRSTCTL0_CLR = mask;
+  while ((RSTCTL1->PRSTCTL0 & mask) == mask)
+    spin(1);
+  ((FLEXCOMM_Type *)uart)->PSELID = 1;
+
+  uart->FIFOCFG |= USART_FIFOCFG_EMPTYTX_MASK |
+                   USART_FIFOCFG_ENABLETX_MASK; // empty and enable txFIFO
+  uart->CFG = BIT(2) | BIT(0);                  //  8 bit data length and enable
+
+  // compute baud
+  uint32_t uart_freq = SYS_FREQUENCY / FRG_PLL_CLKDIV;
+  uint32_t best_diff = (uint32_t)-1, best_osr = 0xF, best_brg = (uint32_t)-1;
+  uint32_t osr, brg, diff, current_baud;
+  for (osr = 15; osr >= 4; osr--) {
+    brg = (((uart_freq * 10) / ((osr + 1) * baud)) - 5) / 10;
+    if (brg > 0xFFFF)
+      continue;
+    current_baud = uart_freq / ((osr + 1) * (brg + 1));
+    diff =
+        (baud < current_baud) ? (current_baud - baud) : (baud - current_baud);
+    if (diff < best_diff) {
+      best_diff = diff;
+      best_osr = osr;
+      best_brg = brg;
+    }
+  }
+  uart->OSR = best_osr;
+  uart->BRG = best_brg;
+}
+
+static inline void hal_uart_write_byte(USART_Type *uart, uint8_t byte) {
+  while ((uart->FIFOSTAT & USART_FIFOSTAT_TXNOTFULL_MASK) == 0)
+    spin(1);
+  uart->FIFOWR = byte;
+}
+static inline void hal_uart_write_buf(USART_Type *uart, char *buf, size_t len) {
+  while (len-- > 0)
+    hal_uart_write_byte(uart, *(uint8_t *)buf++);
+}
+
+static inline void hal_rng_init(void) {
+  trng_config_t config;
+  TRNG_GetDefaultConfig(&config);
+  TRNG_Init(TRNG, &config);
+}
+
+static inline uint32_t hal_rng_read(void) {
+  uint32_t value;
+  TRNG_GetRandomData(TRNG, &value, sizeof(value));
+  return value;
+}
+
+static inline void hal_ethernet_init(void) {
+  CLOCK_EnableClock(kCLOCK_TddrMciEnetClk);
+  hal_gpio_init(PIN(0, 25), HAL_GPIO_MODE_OUTPUT, IO_MUX_PinConfigPullUpDriveWeak,
+            &(io_mux_config_t){ IO_MUX_ENET_CLK }); // ENET_CLK on GPIO_25
+  IO_MUX_SetPinMux(
+      IO_MUX_ENET_RX); // ENET_RX on pin GPIO_62, GPIO_63, GPIO_22, GPIO_23
+  IO_MUX_SetPinMux(IO_MUX_ENET_TX); // ENET_TX on pin GPIO_58, GPIO_59, GPIO_60
+  IO_MUX_SetPinMux(IO_MUX_ENET_MDIO); // ENET_MDIO on pin GPIO_56, GPIO_57
+
+  // reset ENET peripheral
+  RSTCTL0->PRSTCTL1_SET = BIT(25);
+  while ((RSTCTL0->PRSTCTL1 & BIT(25)) == 0)
+    spin(1);
+  RSTCTL0->PRSTCTL1_CLR = BIT(25);
+  while ((RSTCTL0->PRSTCTL1 & BIT(25)) == BIT(25))
+    spin(1);
+  RSTCTL0->PRSTCTL1_SET = BIT(26);
+  while ((RSTCTL0->PRSTCTL1 & BIT(26)) == 0)
+    spin(1);
+  RSTCTL0->PRSTCTL1_CLR = BIT(26);
+  while ((RSTCTL0->PRSTCTL1 & BIT(26)) == BIT(26))
+    spin(1);
+
+  // Enable clocks
+  CLOCK_EnableClock(kCLOCK_EnetIpg);
+  CLOCK_EnableClock(kCLOCK_EnetIpgS);
+
+  NVIC_EnableIRQ(ENET_IRQn);
+}
+extern void set_flexspi_clock(FLEXSPI_Type *base, uint32_t src,
+                              uint32_t divider);
+static inline void hal_clock_init(void) {
+  const clock_avpll_config_t avpllConfig_BOARD_BootClockRUN = {
+      .ch1Freq =
+          kCLOCK_AvPllChFreq12p288m,    // AVPLL channel frequency 12.288 MHz
+      .ch2Freq = kCLOCK_AvPllChFreq64m, // AVPLL channel frequency 64 MHz
+      .enableCali = true,               // AVPLL calibration is enabled
+  };
+  // As NXP BOARD_BootClockRUN(): the ROM leaves the ELS glitch detector and
+  // voltage sensors armed, trimmed for the boot clock. Disable them before
+  // changing the clock, or the ROM resets the chip when it next uses ELS
+  POWER_DisableGDetVSensors();
+  if ((PMU->CAU_SLP_CTRL & PMU_CAU_SLP_CTRL_SOC_SLP_RDY_MASK) == 0) {
+    CLOCK_EnableClock(
+        kCLOCK_RefClkCauSlp); // Enable the CAU sleep clock for PMU
+  }
+  if ((SYSCTL2->SOURCE_CLK_GATE & SYSCTL2_SOURCE_CLK_GATE_REFCLK_SYS_CG_MASK) !=
+      0) {
+    CLOCK_EnableClock(kCLOCK_RefClkSys); // Enable the REFCLK_SYS clock
+  }
+  CLOCK_InitT3RefClk(kCLOCK_T3MciIrc48m); // Initialize T3 PLL and enable
+                                          // outputs that are not clock gated
+  CLOCK_EnableClock(
+      kCLOCK_T3PllMciIrcClk); // Enable FFRO - T3 PLL 48/60 MHz IRC clock output
+  CLOCK_EnableClock(
+      kCLOCK_T3PllMci256mClk); // Enable T3 PLL 256 MHz clock output
+
+  // Move FLEXSPI clock source to T3 256M / 4 to avoid instruction/data fetch
+  // issue in XIP when updating PLL and main clock.
+  set_flexspi_clock(FLEXSPI, 6, 4);
+  CLOCK_AttachClk(kSYSOSC_to_MAIN_CLK); // Set core clock to safe system
+                                        // oscillator for initialization
+  CLOCK_SetClkDiv(kCLOCK_DivSysCpuAhbClk,
+                  1); // Set system CPU AHB clock divider to 1
+  CLOCK_InitTcpuRefClk(
+      3120000000UL,
+      kCLOCK_TcpuFlexspiDiv10); // Initialize TCPU PLL and enable outputs
+  CLOCK_EnableClock(kCLOCK_TcpuMciClk); // Enable TCPU PLL MCI clock output
+  CLOCK_InitTddrRefClk(
+      kCLOCK_TddrFlexspiDiv10); // Initialize TDDR PLL and enable outputs
+  CLOCK_EnableClock(
+      kCLOCK_TddrMciFlexspiClk); // Enable TDDR PLL FlexSPI clock output
+  CLOCK_InitAvPll(&avpllConfig_BOARD_BootClockRUN); // Initialize AVPLL and
+                                                    // enable both channels
+  CLOCK_AttachClk(kRC32K_to_CLK32K);                // Switch CLK32K to RC32K
+  CLOCK_AttachClk(
+      kSYSTICK_DIV_to_SYSTICK_CLK); // Switch SYSTICK_CLK to SYSTICK_DIV
+  CLOCK_SetClkDiv(kCLOCK_DivAudioPllClk, 1U); // Set AUDIOPLLCLKDIV divider to 1
+  CLOCK_SetClkDiv(kCLOCK_DivPllFrgClk,
+                  FRG_PLL_CLKDIV);           // Set FRGPLLCLKDIV divider
+  CLOCK_SetClkDiv(kCLOCK_DivMainPllClk, 1U); // Set MAINPLLCLKDIV divider to 1
+  CLOCK_SetClkDiv(kCLOCK_DivAux0PllClk, 1U); // Set AUX0PLLCLKDIV divider to 1
+  CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U); // Set SYSTICKFCLKDIV divider to 1
+  CLOCK_SetClkDiv(kCLOCK_DivPmuFclk, 5U);    // Set PMUFCLKDIV divider to 5
+  CLOCK_AttachClk(
+      kMAIN_PLL_to_MAIN_CLK); // Select the main clock source for system clock
+  set_flexspi_clock(FLEXSPI, 2U, 2U); // set_flexspi_clock
+
+  CLOCK_EnableClock(kCLOCK_HsGpio0);
+  RSTCTL1->PRSTCTL1_SET = BIT(0); // Reset GPIO_0
+  while ((RSTCTL1->PRSTCTL1 & BIT(0)) == 0)
+    spin(1);
+  RSTCTL1->PRSTCTL1_CLR = BIT(0);
+  while ((RSTCTL1->PRSTCTL1 & BIT(0)) == BIT(0))
+    spin(1);
+
+  CLOCK_EnableClock(kCLOCK_HsGpio1);
+  RSTCTL1->PRSTCTL1_SET = BIT(1); // Reset GPIO_1
+  while ((RSTCTL1->PRSTCTL1 & BIT(1)) == 0)
+    spin(1);
+  RSTCTL1->PRSTCTL1_CLR = BIT(1);
+  while ((RSTCTL1->PRSTCTL1 & BIT(1)) == BIT(1))
+    spin(1);
+}
+
+#if defined(__MCUXPRESSO)
+#undef MG_HAL_DISABLE_SYSTEM_INIT
+#define MG_HAL_DISABLE_SYSTEM_INIT 1
+#undef MG_HAL_SBRK_NONE
+#define MG_HAL_SBRK_NONE 1
+#endif
+
+static inline void hal_system_init(void) {
+  SCB->CPACR |=
+    (3UL << 0 * 2) | (3UL << 1 * 2) |   // Enable PowerQuad (CPO/CP1)
+    (3UL << 10 * 2) | (3UL << 11 * 2); // Enable FPU
+  SCB->NSACR |= ((3UL << 0) | (3UL << 10));
+  CACHE64_CTRL0->CCR = CACHE64_CTRL_CCR_INVW1_MASK | CACHE64_CTRL_CCR_INVW0_MASK;
+  CACHE64_CTRL0->CCR |= CACHE64_CTRL_CCR_GO_MASK;
+  while ((CACHE64_CTRL0->CCR & CACHE64_CTRL_CCR_GO_MASK) != 0) spin(1);
+  // Enable cache, enable write buffer
+  CACHE64_CTRL0->CCR = (CACHE64_CTRL_CCR_ENWRBUF_MASK | CACHE64_CTRL_CCR_ENCACHE_MASK);
+
+  // Set whole FlexSPI0 space to write through
+  CACHE64_POLSEL0->REG0_TOP = 0x07FFFC00U;
+  CACHE64_POLSEL0->REG1_TOP = 0x0U;
+  CACHE64_POLSEL0->POLSEL   = 0x1U;
+  
+  __DSB();
+  __ISB();
+}

tutorials/nxp/frdm-rw612/eth_radio_bridge/link.ld

@@ -0,0 +1,38 @@
+ENTRY(Reset_Handler);
+MEMORY {
+  flash(rx)  : ORIGIN = 0x08000000, LENGTH = 0x4000000
+  sram(rwx) : ORIGIN = 0x20000000, LENGTH = 0x123000  /* Top is reserved, as in NXP wireless linker scripts */
+}
+__StackTop = ORIGIN(sram) + LENGTH(sram);
+
+SECTIONS {
+  .boot_hdr : ALIGN(4) { FILL(0xFF); . = 0x400; __FLASH_BASE = .; KEEP(*(.flash_conf)) . = 0x1000; } > flash
+  .vectors  : { FILL(256) KEEP(*(.isr_vector)) } > flash
+  .text     : { *(.text.* *.text.*) } > flash
+  .rodata   : { *(.rodata*) }      > flash
+
+  .iram : {
+        _siram = .;
+         *(.iram)
+         *(CodeQuickAccess)  /* NXP SDK drivers, e.g. fsl_power.c */
+         *(DataQuickAccess)
+        _eiram = .;
+  } > sram AT > flash
+  _siiram = LOADADDR(.iram);
+
+  .data : {
+      _sdata = .;
+      *(.first_data)
+      *(.data SORT(.data.*))
+      _edata = .;
+  } > sram AT > flash
+  _sidata = LOADADDR(.data);
+
+  .bss : { _sbss = .; *(.bss SORT(.bss.*) COMMON) _ebss = .; } > sram
+  . = ALIGN(8);
+  _end = .;
+
+  _image_start = LOADADDR(.text);
+  _image_end = LOADADDR(.data) + SIZEOF(.data);
+  _image_size = _image_end - _image_start;
+}

tutorials/nxp/frdm-rw612/eth_radio_bridge/main.c

@@ -0,0 +1,101 @@
+// Copyright (c) 2026 Cesanta Software Limited
+// All rights reserved
+//
+// Ethernet <-> IEEE 802.15.4 radio bridge. Radio frames carry Ethernet frames
+// split into pieces, see mg_l2_802154_tx(). Radio nodes, e.g. the
+// FRDM-MCXW71 minimal tutorial, are on the Ethernet LAN: they get IPv4
+// addresses from its DHCP server. The bridge itself has no IP address.
+// Everything from the radio goes to Ethernet. From Ethernet, only broadcasts
+// and frames to radio nodes go to the radio, it is much slower
+
+#include "hal.h"
+#include "mongoose.h"
+
+#define UART_DEBUG USART3
+
+static void log_fn(char ch, void *param) {
+  hal_uart_write_buf(param, &ch, 1);
+}
+
+uint64_t mg_millis(void) {
+  return hal_get_tick();
+}
+
+// MAC addresses of radio nodes, learned from frames they send
+static uint8_t s_nodes[8][6];
+static size_t s_next;
+
+// Remember a radio node's MAC address, if new
+static void learn(const uint8_t *mac) {
+  size_t i, n = sizeof(s_nodes) / sizeof(s_nodes[0]);
+  for (i = 0; i < n && memcmp(s_nodes[i], mac, 6) != 0; i++) (void) 0;
+  if (i < n) return;
+  memcpy(s_nodes[s_next], mac, 6);
+  s_next = (s_next + 1) % n;
+  MG_INFO(("Radio node %M", mg_print_mac, mac));
+}
+
+// Is an Ethernet frame for the radio: broadcast, or to a radio node
+static bool for_radio(const uint8_t *dst) {
+  size_t i, n = sizeof(s_nodes) / sizeof(s_nodes[0]);
+  if (memcmp(dst, "\xff\xff\xff\xff\xff\xff", 6) == 0) return true;
+  for (i = 0; i < n && memcmp(s_nodes[i], dst, 6) != 0; i++) (void) 0;
+  return i < n;
+}
+
+int main(void) {
+  static struct mg_tcpip_driver_rw612_data eth_data = {
+      .mdc_cr = MG_DRIVER_MDC_CR, .phy_addr = MG_TCPIP_PHY_ADDR};
+  static struct mg_l2_802154_data radio_data = {
+      .channel = MG_L2_802154_CHANNEL, .pan_id = MG_L2_802154_PAN_ID};
+  static struct mg_tcpip_if eth = {.driver = &mg_tcpip_driver_rw612,
+                                   .driver_data = &eth_data};
+  static struct mg_tcpip_if radio = {.driver = &mg_tcpip_driver_rw612_154,
+                                     .driver_data = &radio_data};
+  static char eth_queue[8192];  // Filled by the Ethernet IRQ handler
+  static uint8_t frame[1540];
+  uint8_t uid[FSL_OCOTP_UID_LENGTH], digest[32];
+  uint32_t uid_len = sizeof(uid);
+  uint64_t timer = 0;
+  char *p;
+  size_t n;
+
+  hal_clock_init();
+  hal_uart_init(UART_DEBUG, 115200);
+  mg_log_set_fn(log_fn, UART_DEBUG);
+  if (hal_radio_err) {
+    MG_ERROR(("Radio firmware failed to start, step %d", hal_radio_err));
+  }
+
+  // MAC addresses made from the chip unique ID
+  memset(uid, 0, sizeof(uid));
+  OCOTP_ReadUniqueID(uid, &uid_len);
+  mg_sha256(digest, uid, sizeof(uid));
+  memcpy(eth.mac, digest, 6);
+  memcpy(radio.mac, digest + 6, 6);
+  eth.mac[0] = radio.mac[0] = 0x02;  // Locally administered, unicast
+
+  hal_ethernet_init();
+  mg_queue_init(&eth.recv_queue, eth_queue, sizeof(eth_queue));
+  if (!eth.driver->init(&eth)) MG_ERROR(("Ethernet init failed"));
+  if (!radio.driver->init(&radio)) MG_ERROR(("Radio init failed"));
+  ENET->RCR |= ENET_RCR_PROM_MASK;  // Receive frames for radio nodes, too
+  MG_INFO(("Bridge started, radio channel %d", radio_data.channel));
+
+  for (;;) {
+    if ((n = mg_queue_next(&eth.recv_queue, &p)) > 0) {  // Ethernet -> radio
+      if (n >= 14 && for_radio((uint8_t *) p)) radio.driver->tx(p, n, &radio);
+      mg_queue_del(&eth.recv_queue, n);
+    }
+    if ((n = radio.driver->rx(frame, sizeof(frame), &radio)) >= 14) {
+      learn(frame + 6);  // Radio -> Ethernet
+      eth.driver->tx(frame, n, &eth);
+    }
+    if (mg_timer_expired(&timer, 1000, mg_millis())) {  // Ethernet link
+      bool up = eth.driver->poll(&eth, true);
+      eth.state = up ? MG_TCPIP_STATE_UP : MG_TCPIP_STATE_DOWN;
+    }
+  }
+
+  return 0;
+}

tutorials/nxp/frdm-rw612/eth_radio_bridge/mongoose_config.h

@@ -0,0 +1,10 @@
+#pragma once
+
+// See https://mongoose.ws/docs/getting-started/build-environment/
+#define MG_ARCH MG_ARCH_ARMGCC
+
+#define MG_ENABLE_TCPIP 1
+#define MG_ENABLE_DRIVER_RW612 1       // Ethernet
+#define MG_ENABLE_DRIVER_RW612_154 1   // 802.15.4 radio
+#define MG_ENABLE_TCPIP_DRIVER_INIT 0  // main.c drives both, no TCP/IP stack
+#define MG_ENABLE_CUSTOM_MILLIS 1

tutorials/nxp/frdm-rw612/eth_radio_bridge/radio.c

@@ -0,0 +1,236 @@
+// Load NXP BLE/802.15.4 combo firmware to CPU2 and start it.
+// Port of NXP mcux-component conn_fwloader: fsl_loader_utils.c (SB3 loader,
+// load_service_monolithic) and nboot_hal.c (manifest parameters).
+// Copyright 2024 NXP
+// SPDX-License-Identifier: BSD-3-Clause
+
+#include "hal.h"
+#include "fsl_ocotp.h"
+#include "fsl_power.h"
+#include "fsl_romapi_nboot.h"
+#include "fsl_romapi_otp.h"
+#include "fsl_kb_api.h"
+#include "fsl_sbloader_v3.h"
+
+// The firmware image, linked into our flash. Signed SB3 container, see
+// https://github.com/NXP/wifi_nb_fw, rw61x/rw61x_sb_ble_15d4_combo_a2.bin
+__asm__(
+    ".section .rodata.radio_fw,\"a\"\n"
+    ".balign 16\n"
+    "radio_fw:\n"
+    ".incbin \"" RADIO_FW "\"\n"
+    ".balign 4\n"
+    "radio_fw_end:\n"
+    ".previous\n");
+extern const uint8_t radio_fw[], radio_fw_end[];
+
+#define CIU2_RST_SW3 (*(volatile uint32_t *) 0x4424011cU)
+#define CIU2_RST_SW3_CPU2_RST BIT(4)
+#define CPU2_MAGIC (*(volatile uint32_t *) 0x443c0000U)  // Set by firmware
+#define CPU2_MAGIC_VALUE 0xabcdef89U
+#define OTP_LCS_FUSE_IDX 45U     // Life cycle state, and its redundant copy
+#define OTP_PCK_BLOB_FUSE_IDX 116U  // Part common key blob, 48 bytes
+
+// SB3 loader state. See fsl_ldr_Context_v3_t
+struct sb3 {
+  nboot_context_t nboot;     // ROM nboot context
+  uint8_t buf[MAX(NBOOT_SB3_MANIFEST_MAX_SIZE_IN_BYTES,
+                  NBOOT_SB3_BLOCK_MAX_SIZE_IN_BYTES)];  // Block being read
+  uint32_t buf_size;         // Bytes needed for the current block
+  uint32_t buf_pos;          // Bytes in buf so far
+  bool header_done;          // Manifest (block 0) processed
+  uint32_t data_offset;      // Data offset within a block
+  uint32_t blocks;           // Data blocks processed
+  uint8_t *data;             // Data of the current block
+  uint32_t pos;              // Position in data
+  bool in_section;           // Inside a data section
+  uint32_t section_done;     // Bytes of the section handled
+  sb3_section_header_t section;
+  bool in_range;             // Inside a data range
+  uint32_t range_gap;        // Padding after the range, 16 byte alignment
+  sb3_data_range_header_t range;
+  bool has_expansion;        // Range expansion read
+  bool executed;             // Execute command seen: firmware loaded
+};
+static struct sb3 s_sb3;
+
+static uint32_t antipole(uint32_t v) {
+  return (v & 0xffffU) | (~(v & 0xffffU) << 16);
+}
+
+// Manifest parameters: root of trust for NXP signed images, rev A2 chips.
+// See nboot_hal_get_sb3_manifest_params(), nboot_hal.c
+static bool manifest_params(nboot_sb3_load_manifest_parms_t *p) {
+  static const uint32_t rkh_a2[8] = {0xE7C7E9BB, 0x12C8C535, 0x37E61148,
+                                     0x2BE7F18C, 0x8F0E3094, 0xB2BA7F32,
+                                     0xEC9B4ECB, 0xAD9FC941};
+  uint32_t i, lcs = OCOTP->OTP_SHADOW[OTP_LCS_FUSE_IDX];
+  memset(p, 0, sizeof(*p));
+  if ((lcs & 0xff) != ((lcs >> 8) & 0xff)) return false;  // Corrupt LCS
+  for (i = 0; i < NBOOT_ROOT_CERT_COUNT; i++) {
+    p->soc_RoTNVM.soc_rootKeyRevocation[i] = kNBOOT_RootKey_Enabled;
+  }
+  memcpy(p->soc_RoTNVM.soc_rkh, rkh_a2, sizeof(rkh_a2));
+  p->soc_RoTNVM.soc_numberOfRootKeys = 1;
+  for (i = 1; i < NBOOT_ROOT_CERT_COUNT; i++) {
+    p->soc_RoTNVM.soc_rootKeyUsage[i] = kNBOOT_RootKeyUsage_Unused;
+  }
+  p->soc_RoTNVM.soc_rootKeyTypeAndLength = kNBOOT_RootKey_Ecdsa_P256;
+  p->soc_RoTNVM.soc_lifecycle = (nboot_soc_lifecycle_t) antipole(lcs & 0xff);
+  for (i = 0; i < sizeof(p->pckBlob) / 4; i++) {
+    if (OCOTP_OtpFuseRead(OTP_PCK_BLOB_FUSE_IDX + i,
+                          (uint32_t *) &p->pckBlob[4 * i]) != kStatus_Success) {
+      return false;
+    }
+  }
+  return true;
+}
+
+// Manifest (block 0): verify, learn the block layout. See ldr_DoHeader_v3()
+static bool sb3_header(struct sb3 *s) {
+  nboot_sb3_header_t *h = (nboot_sb3_header_t *) s->buf;
+  nboot_sb3_load_manifest_parms_t parms;
+  if (s->buf_size == sizeof(nboot_sb3_header_t)) {  // Header only so far
+    s->buf_size = h->imageTotalLength;
+    s->buf_pos = sizeof(nboot_sb3_header_t);
+    return s->buf_size <= sizeof(s->buf);
+  }
+  if (!manifest_params(&parms)) return false;
+  // Protected status: the status code is in the low 32 bits
+  if ((nboot_status_t) nboot_sb3_load_manifest(&s->nboot, (uint32_t *) h,
+                                               &parms) != kStatus_NBOOT_Success) {
+    return false;
+  }
+  s->data_offset = 4 + h->certificateBlockOffset - sizeof(nboot_sb3_header_t);
+  s->buf_size = s->data_offset + NBOOT_SB3_CHUNK_SIZE_IN_BYTES;
+  s->header_done = true;
+  return true;
+}
+
+// Copy (part of) the current load range to its destination
+static void sb3_load(struct sb3 *s) {
+  uint32_t avail = NBOOT_SB3_CHUNK_SIZE_IN_BYTES - s->pos;
+  uint32_t n = s->range.length < avail ? s->range.length : avail;
+  memcpy((void *) s->range.startAddress, &s->data[s->pos], n);
+  s->pos += n, s->section_done += n;
+  s->range.startAddress += n, s->range.length -= n;
+  if (s->range.length == 0) {  // Range done, skip alignment padding
+    s->in_range = false;
+    s->pos += s->range_gap, s->section_done += s->range_gap;
+  }
+}
+
+// Process one decrypted data block. See ldr_DoBlock()
+static bool sb3_block(struct sb3 *s) {
+  while (s->pos < NBOOT_SB3_CHUNK_SIZE_IN_BYTES) {
+    if (!s->in_section) {  // New section
+      memcpy(&s->section, &s->data[s->pos], sizeof(s->section));
+      if (s->section.sectionType == kSectionNone) break;  // Rest is unused
+      if (s->section.sectionType != kSectionDataRange) return false;
+      s->in_section = true, s->section_done = 0, s->in_range = false;
+      s->pos += sizeof(sb3_section_header_t);
+    }
+    if (!s->in_range) {  // New range
+      memcpy(&s->range, &s->data[s->pos], sizeof(s->range));
+      if (s->range.tag != SB3_DATA_RANGE_HEADER_TAG) return false;
+      s->in_range = true, s->has_expansion = false, s->range_gap = 0;
+      s->pos += sizeof(sb3_data_range_header_t);
+      s->section_done += sizeof(sb3_data_range_header_t);
+      if (s->range.cmd == kSB3_CmdLoad) {
+        s->range_gap = (SB3_DATA_ALIGNMENT_SIZE_IN_BYTE -
+                        (s->range.length & 15U)) & 15U;
+      }
+    }
+    if (s->range.cmd == kSB3_CmdLoad) {
+      if (!s->has_expansion) {
+        if (s->pos == NBOOT_SB3_CHUNK_SIZE_IN_BYTES) break;  // Next block
+        s->has_expansion = true;
+        s->pos += sizeof(sb3_data_range_expansion_t);
+        s->section_done += sizeof(sb3_data_range_expansion_t);
+      }
+      if (s->pos < NBOOT_SB3_CHUNK_SIZE_IN_BYTES) sb3_load(s);
+    } else if (s->range.cmd == kSB3_CmdExecute) {
+      s->executed = true;
+      return true;
+    } else {
+      s->in_range = false;  // Other commands: nothing to do
+    }
+    if (s->section_done == s->section.length) s->in_section = false;
+    if (s->section_done > s->section.length) return false;
+  }
+  s->pos = 0;
+  return true;
+}
+
+// Feed image bytes, process complete blocks. See fsl_sbloader_pump()
+static bool sb3_pump(struct sb3 *s, const uint8_t *p, uint32_t len) {
+  while (len > 0 && !s->executed) {
+    uint32_t n = s->buf_size - s->buf_pos;
+    if (n > len) n = len;
+    memcpy(&s->buf[s->buf_pos], p, n);
+    s->buf_pos += n, p += n, len -= n;
+    if (s->buf_pos < s->buf_size) break;
+    s->buf_pos = 0;
+    if (!s->header_done) {
+      if (!sb3_header(s)) return false;
+    } else {
+      if (s->blocks >= s->nboot.totalBlocks) return false;
+      if ((nboot_status_t) nboot_sb3_load_block(
+              &s->nboot, (uint32_t *) s->buf) != kStatus_NBOOT_Success) {
+        return false;
+      }
+      s->blocks++;
+      s->data = &s->buf[s->data_offset];
+      if (!sb3_block(s)) return false;
+    }
+  }
+  return true;
+}
+
+// Authenticate the image with the ROM, copy it to CPU2 memory.
+// See loader_process_sb_file()
+static bool sb3_process(const uint8_t *img, size_t len) {
+  struct sb3 *s = &s_sb3;
+  bool ok = false;
+  memset(s, 0, sizeof(*s));
+  s->buf_size = sizeof(nboot_sb3_header_t);
+  // Start ELS only if it is off: the ROM keeps keys in it after boot
+  if ((CLKCTL0->PSCCTL0 & CLKCTL0_PSCCTL0_ELS_MASK) == 0 ||
+      (CLKCTL0->PSCCTL1 & CLKCTL0_PSCCTL1_ELS_APB_MASK) == 0 ||
+      (RSTCTL0->PRSTCTL0 & RSTCTL0_PRSTCTL0_ELS_MASK) != 0) {
+    CLOCK_EnableClock(kCLOCK_Els);
+    CLOCK_EnableClock(kCLOCK_ElsApb);
+    RESET_PeripheralReset(kELS_RST_SHIFT_RSTn);
+  }
+  if (nboot_context_init(&s->nboot) == kStatus_NBOOT_Success) {
+    ok = sb3_pump(s, img, (uint32_t) len) && s->executed;
+    (void) nboot_context_deinit(&s->nboot);
+  }
+  return ok;
+}
+
+// Load the radio firmware to CPU2 and start it. See sb3_fw_reset() and
+// load_service_monolithic(), fsl_loader_utils.c. Call before changing the
+// boot clock: the ROM trims the ELS glitch detector for it, and after the
+// clock change ELS reports glitch events. Interrupts may be off.
+// Return 0 on success, or the failed step: 1 chip revision, 2 OTP, 3 image
+// load, 4 firmware start
+int hal_radio_init(void) {
+  uint32_t n = 100000000;  // Firmware start timeout, loop iterations
+  bool ok;
+  if ((SOCCTRL->CHIP_INFO & 15U) != 2U) return 1;  // Image is for rev A2
+  POWER_PowerOffBle();
+  spin(100000);
+  if (otp_init(0) != kStatus_Success) return 2;
+  POWER_PowerOnBle();
+  spin(100000);
+  CPU2_MAGIC = 0;
+  ok = sb3_process(radio_fw, (size_t) (radio_fw_end - radio_fw));
+  (void) otp_deinit();
+  if (!ok) return 3;
+  CIU2_RST_SW3 |= CIU2_RST_SW3_CPU2_RST;
+  while (CPU2_MAGIC != CPU2_MAGIC_VALUE) {
+    if (--n == 0) return 4;  // Firmware did not start
+  }
+  return 0;
+}

tutorials/nxp/frdm-rw612/eth_radio_bridge/startup.c

@@ -0,0 +1,338 @@
+#include "RW612.h"
+
+void Reset_Handler(void);    // Defined below
+void Dummy_Handler(void);    // Defined below
+void SysTick_Handler(void);  // Defined in main.c
+void SystemInit(void);       // Defined in main.c, called by reset handler
+void __StackTop(void);          // Defined in link.ld
+void _image_size(void);
+
+#define WEAK __attribute__((weak, alias("Default_Handler")))
+
+void Default_Handler(void);
+WEAK void NMI_Handler(void);
+WEAK void HardFault_Handler(void);
+WEAK void MemManage_Handler(void);
+WEAK void BusFault_Handler(void);
+WEAK void UsageFault_Handler(void);
+WEAK void SecureFault_Handler(void);
+WEAK void SVC_Handler(void);
+WEAK void DebugMon_Handler(void);
+WEAK void PendSV_Handler(void);
+WEAK void SysTick_Handler(void);
+WEAK void IntDefaultHandler(void);
+WEAK void WDT0_IRQHandler(void);
+WEAK void DMA0_IRQHandler(void);
+WEAK void GPIO_INTA_IRQHandler(void);
+WEAK void GPIO_INTB_IRQHandler(void);
+WEAK void PIN_INT0_IRQHandler(void);
+WEAK void PIN_INT1_IRQHandler(void);
+WEAK void PIN_INT2_IRQHandler(void);
+WEAK void PIN_INT3_IRQHandler(void);
+WEAK void UTICK_IRQHandler(void);
+WEAK void MRT_IRQHandler(void);
+WEAK void CTIMER0_IRQHandler(void);
+WEAK void CTIMER1_IRQHandler(void);
+WEAK void SCT0_IRQHandler(void);
+WEAK void CTIMER3_IRQHandler(void);
+WEAK void FLEXCOMM0_IRQHandler(void);
+WEAK void FLEXCOMM1_IRQHandler(void);
+WEAK void FLEXCOMM2_IRQHandler(void);
+WEAK void FLEXCOMM3_IRQHandler(void);
+WEAK void Reserved34_IRQHandler(void);
+WEAK void Reserved35_IRQHandler(void);
+WEAK void FLEXCOMM14_IRQHandler(void);
+WEAK void Reserved37_IRQHandler(void);
+WEAK void Reserved38_IRQHandler(void);
+WEAK void GFMRT_IRQHandler(void);
+WEAK void Reserved40_IRQHandler(void);
+WEAK void DMIC_IRQHandler(void);
+WEAK void WKDEEPSLEEP_IRQHandler(void);
+WEAK void HYPERVISOR_IRQHandler(void);
+WEAK void SECUREVIOLATION_IRQHandler(void);
+WEAK void HWVAD_IRQHandler(void);
+WEAK void Reserved46_IRQHandler(void);
+WEAK void Reserved47_IRQHandler(void);
+WEAK void RTC_IRQHandler(void);
+WEAK void Reserved49_IRQHandler(void);
+WEAK void Reserved50_IRQHandler(void);
+WEAK void PIN_INT4_IRQHandler(void);
+WEAK void PIN_INT5_IRQHandler(void);
+WEAK void PIN_INT6_IRQHandler(void);
+WEAK void PIN_INT7_IRQHandler(void);
+WEAK void CTIMER2_IRQHandler(void);
+WEAK void CTIMER4_IRQHandler(void);
+WEAK void OS_EVENT_TIMER_IRQHandler(void);
+WEAK void FLEXSPI_IRQHandler(void);
+WEAK void Reserved59_IRQHandler(void);
+WEAK void Reserved60_IRQHandler(void);
+WEAK void Reserved61_IRQHandler(void);
+WEAK void SDIO_IRQHandler(void);
+WEAK void SGPIO_INTA_IRQHandler(void);
+WEAK void SGPIO_INTB_IRQHandler(void);
+WEAK void Reserved65_IRQHandler(void);
+WEAK void USB_IRQHandler(void);
+WEAK void Reserved67_IRQHandler(void);
+WEAK void Reserved68_IRQHandler(void);
+WEAK void Reserved69_IRQHandler(void);
+WEAK void DMA1_IRQHandler(void);
+WEAK void PUF_IRQHandler(void);
+WEAK void POWERQUAD_IRQHandler(void);
+WEAK void Reserved73_IRQHandler(void);
+WEAK void Reserved74_IRQHandler(void);
+WEAK void Reserved75_IRQHandler(void);
+WEAK void Reserved76_IRQHandler(void);
+WEAK void LCD_IRQHandler(void);
+WEAK void CAPTIMER_IRQHandler(void);
+WEAK void Reserved79_IRQHandler(void);
+WEAK void W2MWKUP_DONE0_IRQHandler(void);
+WEAK void W2MWKUP_DONE1_IRQHandler(void);
+WEAK void W2MWKUP_DONE2_IRQHandler(void);
+WEAK void W2MWKUP_DONE3_IRQHandler(void);
+WEAK void W2MWKUP_DONE4_IRQHandler(void);
+WEAK void W2MWKUP_DONE5_IRQHandler(void);
+WEAK void W2MWKUP_DONE6_IRQHandler(void);
+WEAK void W2MWKUP_DONE7_IRQHandler(void);
+WEAK void W2MWKUP0_IRQHandler(void);
+WEAK void W2MWKUP1_IRQHandler(void);
+WEAK void WL_MCI_INT0_IRQHandler(void);
+WEAK void WL_MCI_INT1_IRQHandler(void);
+WEAK void WL_MCI_INT2_IRQHandler(void);
+WEAK void WL_MCI_INT3_IRQHandler(void);
+WEAK void WL_MCI_INT4_IRQHandler(void);
+WEAK void WL_MCI_INT5_IRQHandler(void);
+WEAK void WL_MCI_INT6_IRQHandler(void);
+WEAK void WL_MCI_INT7_IRQHandler(void);
+WEAK void B2MWKUP_DONE0_IRQHandler(void);
+WEAK void B2MWKUP_DONE1_IRQHandler(void);
+WEAK void B2MWKUP_DONE2_IRQHandler(void);
+WEAK void B2MWKUP_DONE3_IRQHandler(void);
+WEAK void B2MWKUP_DONE4_IRQHandler(void);
+WEAK void B2MWKUP_DONE5_IRQHandler(void);
+WEAK void B2MWKUP_DONE6_IRQHandler(void);
+WEAK void B2MWKUP_DONE7_IRQHandler(void);
+WEAK void B2MWKUP0_IRQHandler(void);
+WEAK void B2MWKUP1_IRQHandler(void);
+WEAK void BLE_MCI_INT0_IRQHandler(void);
+WEAK void BLE_MCI_INT1_IRQHandler(void);
+WEAK void BLE_MCI_INT2_IRQHandler(void);
+WEAK void BLE_MCI_INT3_IRQHandler(void);
+WEAK void BLE_MCI_INT4_IRQHandler(void);
+WEAK void BLE_MCI_INT5_IRQHandler(void);
+WEAK void BLE_MCI_INT6_IRQHandler(void);
+WEAK void BLE_MCI_INT7_IRQHandler(void);
+WEAK void PIN0_INT_IRQHandler(void);
+WEAK void PIN1_INT_IRQHandler(void);
+WEAK void ELS_IRQHandler(void);
+WEAK void ELS_GDET_IRQHandler(void);
+WEAK void ELS_GDET_UM_IRQHandler(void);
+WEAK void PKC_INT_IRQHandler(void);
+WEAK void PKC_ERR_IRQHandler(void);
+WEAK void CDOG_INT_IRQHandler(void);
+WEAK void GAU_DAC_IRQHandler(void);
+WEAK void GAU_ACOMP_WKUP_IRQHandler(void);
+WEAK void GAU_ACOMP_IRQHandler(void);
+WEAK void GAU_ADC1_IRQHandler(void);
+WEAK void GAU_ADC0_IRQHandler(void);
+WEAK void USIM_IRQHandler(void);
+WEAK void OTP_IRQHandler(void);
+WEAK void ENET_IRQHandler(void);
+WEAK void ENET_TIMER_IRQHandler(void);
+WEAK void PMIP_IRQHandler(void);
+WEAK void PMIP_CHANGE_IRQHandler(void);
+WEAK void ITRC_IRQHandler(void);
+WEAK void Reserved136_IRQHandler(void);
+WEAK void Reserved137_IRQHandler(void);
+WEAK void Reserved138_IRQHandler(void);
+WEAK void TRNG_IRQHandler(void);
+WEAK void ACC_C_INT_IRQHandler(void);
+WEAK void ACC_S_INT_IRQHandler(void);
+WEAK void WACC_IRQHandler(void);
+WEAK void BACC_IRQHandler(void);
+WEAK void GDMA_IRQHandler(void);
+
+
+#define WEAK_ALIAS __attribute__((weak, alias("Default_Handler")))
+
+
+__attribute__((section(".vectors"))) void (*const tab[16 + 156])(void) = {
+    &__StackTop,                       // The initial stack pointer
+    Reset_Handler,                          // The reset handler
+    NMI_Handler,                       // NMI Handler
+    HardFault_Handler,                 // Hard Fault Handler
+    MemManage_Handler,                 // MPU Fault Handler
+    BusFault_Handler,                  // Bus Fault Handler
+    UsageFault_Handler,                // Usage Fault Handler
+    SecureFault_Handler,               // Secure Fault Handler
+    &_image_size,                      // Image size
+    0,                                 // Image type
+    0,                                 // Reserved
+    SVC_Handler,                       // SVCall Handler
+    DebugMon_Handler,                  // Debug Monitor Handler
+    (void (*)())tab,                   // Image load address
+    PendSV_Handler,                    // PendSV Handler
+    SysTick_Handler,                   // SysTick Handler
+
+    // Chip Level - RW612
+    WDT0_IRQHandler,             // 16 : Windowed watchdog timer 0 (WDT0)(Cortex-M33 watchdog)
+    DMA0_IRQHandler,             // 17 : Direct memory access (DMA) controller 0 (secure or Cortex-M33 DMA)
+    GPIO_INTA_IRQHandler,        // 18 : GPIO interrupt A
+    GPIO_INTB_IRQHandler,        // 19 : GPIO interrupt B
+    PIN_INT0_IRQHandler,         // 20 : Pin interrupt 0 or pattern match engine slice 0
+    PIN_INT1_IRQHandler,         // 21 : Pin interrupt 1 or pattern match engine slice 1
+    PIN_INT2_IRQHandler,         // 22 : Pin interrupt 2 or pattern match engine slice 2
+    PIN_INT3_IRQHandler,         // 23 : Pin interrupt 3 or pattern match engine slice 3
+    UTICK_IRQHandler,            // 24 : Micro-tick Timer (UTICK)
+    MRT_IRQHandler,              // 25 : Multi-Rate Timer (MRT). Global MRT interrupts
+    CTIMER0_IRQHandler,          // 26 : Standard counter/timer CTIMER0
+    CTIMER1_IRQHandler,          // 27 : Standard counter/timer CTIMER1
+    SCT0_IRQHandler,             // 28 : SCTimer/PWM
+    CTIMER3_IRQHandler,          // 29 : Standard counter/timer CTIMER3
+    FLEXCOMM0_IRQHandler,        // 30 : Flexcomm Interface 0 (USART, SPI, I2C, I2S)
+    FLEXCOMM1_IRQHandler,        // 31 : Flexcomm Interface 1 (USART, SPI, I2C, I2S)
+    FLEXCOMM2_IRQHandler,        // 32 : Flexcomm Interface 2 (USART, SPI, I2C, I2S)
+    FLEXCOMM3_IRQHandler,        // 33 : Flexcomm Interface 3 (USART, SPI, I2C, I2S)
+    Reserved34_IRQHandler,       // 34 : Reserved interrupt
+    Reserved35_IRQHandler,       // 35 : Reserved interrupt
+    FLEXCOMM14_IRQHandler,       // 36 : Flexcomm Interface 14 (USART, SPI, I2C, I2S)
+    Reserved37_IRQHandler,       // 37 : Reserved interrupt
+    Reserved38_IRQHandler,       // 38 : Reserved interrupt
+    GFMRT_IRQHandler,            // 39 : Free Multi-rate timer (GFMRT). Global MRT interrupts
+    Reserved40_IRQHandler,       // 40 : Reserved interrupt
+    DMIC_IRQHandler,             // 41 : Digital microphone (DMIC) and DMIC subsystem
+    WKDEEPSLEEP_IRQHandler,      // 42 : Wake-up from deep sleep
+    HYPERVISOR_IRQHandler,       // 43 : Hypervisor service software interrupt
+    SECUREVIOLATION_IRQHandler,  // 44 : Secure violation
+    HWVAD_IRQHandler,            // 45 : Hardware Voice Activity Detector
+    Reserved46_IRQHandler,       // 46 : Reserved interrupt
+    Reserved47_IRQHandler,       // 47 : Reserved interrupt
+    RTC_IRQHandler,              // 48 : RTC alarm and wake-up
+    Reserved49_IRQHandler,       // 49 : Reserved interrupt
+    Reserved50_IRQHandler,       // 50 : Reserved interrupt
+    PIN_INT4_IRQHandler,         // 51 : Pin interrupt 4 or pattern match engine slice 4
+    PIN_INT5_IRQHandler,         // 52 : Pin interrupt 5 or pattern match engine slice 5
+    PIN_INT6_IRQHandler,         // 53 : Pin interrupt 6 or pattern match engine slice 6
+    PIN_INT7_IRQHandler,         // 54 : Pin interrupt 7 or pattern match engine slice 7
+    CTIMER2_IRQHandler,          // 55 : Standard counter/timer CTIMER2
+    CTIMER4_IRQHandler,          // 56 : Standard counter/timer CTIMER4
+    OS_EVENT_TIMER_IRQHandler,   // 57 : OS event timer 0
+    FLEXSPI_IRQHandler,          // 58 : FLEXSPI interface
+    Reserved59_IRQHandler,       // 59 : Reserved interrupt
+    Reserved60_IRQHandler,       // 60 : Reserved interrupt
+    Reserved61_IRQHandler,       // 61 : Reserved interrupt
+    SDIO_IRQHandler,             // 62 : The secure digital interface
+    SGPIO_INTA_IRQHandler,       // 63 : Secure GPIO interrupt A
+    SGPIO_INTB_IRQHandler,       // 64 : Secure GPIO interrupt B
+    Reserved65_IRQHandler,       // 65 : Reserved interrupt
+    USB_IRQHandler,              // 66 : High-speed USB device/host
+    Reserved67_IRQHandler,       // 67 : Reserved interrupt
+    Reserved68_IRQHandler,       // 68 : Reserved interrupt
+    Reserved69_IRQHandler,       // 69 : Reserved interrupt
+    DMA1_IRQHandler,             // 70 : DMA controller 1 (non-secure or HiFi 4 DMA)
+    PUF_IRQHandler,              // 71 : Physical Unclonable Function
+    POWERQUAD_IRQHandler,        // 72 : PowerQuad math coprocessor
+    Reserved73_IRQHandler,       // 73 : Reserved interrupt
+    Reserved74_IRQHandler,       // 74 : Reserved interrupt
+    Reserved75_IRQHandler,       // 75 : Reserved interrupt
+    Reserved76_IRQHandler,       // 76 : Reserved interrupt
+    LCD_IRQHandler,              // 77 : LCDIC
+    CAPTIMER_IRQHandler,         // 78 : Capture timer
+    Reserved79_IRQHandler,       // 79 : Reserved interrupt
+    W2MWKUP_DONE0_IRQHandler,    // 80 : Wi-Fi to MCU, wakeup done 0
+    W2MWKUP_DONE1_IRQHandler,    // 81 : Wi-Fi to MCU, wakeup done 1
+    W2MWKUP_DONE2_IRQHandler,    // 82 : Wi-Fi to MCU, wakeup done 2
+    W2MWKUP_DONE3_IRQHandler,    // 83 : Wi-Fi to MCU, wakeup done 3
+    W2MWKUP_DONE4_IRQHandler,    // 84 : Wi-Fi to MCU, wakeup done 4
+    W2MWKUP_DONE5_IRQHandler,    // 85 : Wi-Fi to MCU, wakeup done 5
+    W2MWKUP_DONE6_IRQHandler,    // 86 : Wi-Fi to MCU, wakeup done 6
+    W2MWKUP_DONE7_IRQHandler,    // 87 : Wi-Fi to MCU, wakeup done 7
+    W2MWKUP0_IRQHandler,         // 88 : Wi-Fi to MCU, wakeup signal 0
+    W2MWKUP1_IRQHandler,         // 89 : Wi-Fi to MCU, wakueup signal 1
+    WL_MCI_INT0_IRQHandler,      // 90 : Wi-Fi to MCU interrupt 0
+    WL_MCI_INT1_IRQHandler,      // 91 : Reserved for Wi-Fi to MCU
+    WL_MCI_INT2_IRQHandler,      // 92 : Reserved for Wi-Fi to MCU
+    WL_MCI_INT3_IRQHandler,      // 93 : Reserved for Wi-Fi to MCU
+    WL_MCI_INT4_IRQHandler,      // 94 : Reserved for Wi-Fi to MCU
+    WL_MCI_INT5_IRQHandler,      // 95 : Reserved for Wi-Fi to MCU
+    WL_MCI_INT6_IRQHandler,      // 96 : Reserved for Wi-Fi to MCU
+    WL_MCI_INT7_IRQHandler,      // 97 : Reserved for Wi-Fi to MCU
+    B2MWKUP_DONE0_IRQHandler,    // 98 : Bluetooth LE/802.15.4 radio to MCU, wakeup done 0
+    B2MWKUP_DONE1_IRQHandler,    // 99 : Bluetooth LE/802.15.4 radio to MCU, wakeup done 1
+    B2MWKUP_DONE2_IRQHandler,    // 100: Bluetooth LE/802.15.4 radio to MCU, wakeup done 2
+    B2MWKUP_DONE3_IRQHandler,    // 101: Bluetooth LE/802.15.4 radio to MCU, wakeup done 3
+    B2MWKUP_DONE4_IRQHandler,    // 102: Bluetooth LE/802.15.4 radio to MCU, wakeup done 4
+    B2MWKUP_DONE5_IRQHandler,    // 103: Bluetooth LE/802.15.4 radio to MCU, wakeup done 5
+    B2MWKUP_DONE6_IRQHandler,    // 104: Bluetooth LE/802.15.4 radio to MCU, wakeup done 6
+    B2MWKUP_DONE7_IRQHandler,    // 105: Bluetooth LE/802.15.4 radio to MCU, wakeup done 7
+    B2MWKUP0_IRQHandler,         // 106: Bluetooth LE/802.15.4 radio to MCU, wakeup signal 0
+    B2MWKUP1_IRQHandler,         // 107: Bluetooth LE/802.15.4 radio to MCU, wakeup signal 1
+    BLE_MCI_INT0_IRQHandler,     // 108: Bluetooth LE/802.15.4 radio to MCU interrupt 0
+    BLE_MCI_INT1_IRQHandler,     // 109: Reserved for Bluetooth LE/802.15.4 radio to MCU
+    BLE_MCI_INT2_IRQHandler,     // 110: Reserved for Bluetooth LE/802.15.4 radio to MCU
+    BLE_MCI_INT3_IRQHandler,     // 111: Reserved for Bluetooth LE/802.15.4 radio to MCU
+    BLE_MCI_INT4_IRQHandler,     // 112: Reserved for Bluetooth LE/802.15.4 radio to MCU
+    BLE_MCI_INT5_IRQHandler,     // 113: Reserved for Bluetooth LE/802.15.4 radio to MCU
+    BLE_MCI_INT6_IRQHandler,     // 114: Reserved for Bluetooth LE/802.15.4 radio to MCU
+    BLE_MCI_INT7_IRQHandler,     // 115: Reserved for Bluetooth LE/802.15.4 radio to MCU
+    PIN0_INT_IRQHandler,         // 116: From AON GPIO
+    PIN1_INT_IRQHandler,         // 117: From AON GPIO
+    ELS_IRQHandler,              // 118: EdgeLock subsystem (ELS)
+    ELS_GDET_IRQHandler,         // 119: ELS IRQ line for GDET error
+    ELS_GDET_UM_IRQHandler,      // 120: ELS un-gated latched error
+    PKC_INT_IRQHandler,          // 121: Public key crypto-processor (PKC) interrupt
+    PKC_ERR_IRQHandler,          // 122: PKC error
+    CDOG_INT_IRQHandler,         // 123: Code watch dog timmer interrupt
+    GAU_DAC_IRQHandler,          // 124: General analog unit (GAU) digital to analog converter (DAC)
+    GAU_ACOMP_WKUP_IRQHandler,   // 125: GAU analog comparator (ACOMP) wake-up
+    GAU_ACOMP_IRQHandler,        // 126: GAU analog comparator
+    GAU_ADC1_IRQHandler,         // 127: GAU analog to digital converter 1 (ADC1)
+    GAU_ADC0_IRQHandler,         // 128: GAU analog to digital converter 0 (ADC0)
+    USIM_IRQHandler,             // 129: Universal subscriber identity module (USIM) interface
+    OTP_IRQHandler,              // 130: One time programmable (OTP) memory interrupt
+    ENET_IRQHandler,             // 131: Etheret interrupt
+    ENET_TIMER_IRQHandler,       // 132: Ethernet timer interrupt
+    PMIP_IRQHandler,             // 133: Power management IP (PMIP)
+    PMIP_CHANGE_IRQHandler,      // 134: PMIP change from 1 to 0
+    ITRC_IRQHandler,             // 135: Intrusion and tamper response controller (ITRC) interrupt request
+    Reserved136_IRQHandler,      // 136: Reserved interrupt
+    Reserved137_IRQHandler,      // 137: Reserved interrupt
+    Reserved138_IRQHandler,      // 138: Reserved interrupt
+    TRNG_IRQHandler,             // 139: TRNG interrupt request
+    ACC_C_INT_IRQHandler,        // 140: AHB memory access checker - Cortex-M33 code bus
+    ACC_S_INT_IRQHandler,        // 141: AHB memory access checker - Cortex-M33 sys bus
+    WACC_IRQHandler,             // 142: Wi-Fi accessed during power off
+    BACC_IRQHandler,             // 143: Bluetooth LE/802.15.4 radio accessed during power off
+    GDMA_IRQHandler,             // 144: General purpose direct memory access (GDMA) interrupt
+};
+
+extern unsigned char _end[];  // End of data section, start of heap. See link.ld
+__attribute__((naked, noreturn)) void Reset_Handler(void) {
+  __asm("cpsid i");  // Disable interrupts
+  // Config VTOR & MSPLIM register
+  __asm("LDR R0, =0xE000ED08  \n"
+                  "STR %0, [R0]         \n"
+                  "LDR R1, [%0]         \n"
+                  "MSR MSP, R1          \n"
+                  "MSR MSPLIM, %1       \n"
+                  :
+                  : "r"(tab), "r"(_end)
+                  : "r0", "r1");
+  extern long _sbss, _ebss, _sdata, _edata, _sidata, _siram, _siiram, _eiram;
+  for (long *dst = &_sbss; dst < &_ebss; dst++) *dst = 0;
+  for (long *dst = &_sdata, *src = &_sidata; dst < &_edata;) *dst++ = *src++;
+  for (long *dst = &_siram, *src = &_siiram; dst < &_eiram;) *dst++ = *src++;
+  SystemInit();
+  __asm("cpsie i");  // Reenable interrupts
+  // Call main()
+  extern void main(void);
+  main();
+  for (;;) (void) 0;  // Infinite loop
+}
+
+void SystemCoreClockUpdate (void) {
+
+}
+
+void Default_Handler(void) {
+  for (;;) (void) 0;
+}

tutorials/nxp/frdm-rw612/minimal/main.c

@@ -65,6 +65,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/nxp/rt1060-evkb/minimal/main.c

@@ -61,6 +61,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/nxp/rt1170-evkb/minimal/main.c

@@ -65,6 +65,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/rp/pico-rm2/main.c

@@ -5,7 +5,12 @@
 #include "mongoose.h"
 
 static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     uint64_t tick = to_ms_since_boot(get_absolute_time());
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/rp/pico-rmii/main.c

@@ -33,7 +33,12 @@ static void driver_init(struct mg_mgr *mgr) {
 }
 
 static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     uint64_t tick = to_ms_since_boot(get_absolute_time());
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/rp/pico-rndis/main.c

@@ -58,7 +58,12 @@ static void driver_init(struct mg_mgr *mgr) {
 }
 
 static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     uint64_t tick = to_ms_since_boot(get_absolute_time());
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/rp/pico-w/main.c

@@ -39,6 +39,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     uint64_t tick = to_ms_since_boot(get_absolute_time());

tutorials/rp/w5500-evb-pico/main.c

@@ -82,6 +82,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     uint64_t tick = to_ms_since_boot(get_absolute_time());

tutorials/rp/w55rp20-evb-pico/main.c

@@ -195,6 +195,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     uint64_t tick = to_ms_since_boot(get_absolute_time());

tutorials/stm32/nucleo-c5a3zg/cubemx/README.md

@@ -0,0 +1,9 @@
+# Nucleo-C5A3ZI Mongoose Integration
+
+The `.ioc2` file in this directory is pre-configured. Note that after the
+project generation, you should do the following to complete integraion:
+
+1. Edit the linker script `.ld` file and increase heap and stack sizes to
+   0x20000 and 0x4000 respectively
+2. Add Mongoose to the `main.c`, see https://mongoose.ws/docs/guides/stm32-tcpip-stack/#modify-mainc
+

tutorials/stm32/nucleo-c5a3zg/minimal/Makefile

@@ -0,0 +1,46 @@
+# Copyright (c) 2026 Cesanta Software Limited
+# Environment setup: https://mongoose.ws/docs/getting-started/build-environment/
+
+MGDIR = ../../../..
+
+CFLAGS  = -W -Wall -Wextra -Wundef -Wshadow -Wdouble-promotion
+CFLAGS += -Wformat-truncation -fno-common -Wconversion -Wno-sign-conversion
+CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
+CFLAGS += -I. -I$(MGDIR) -Icmsis_core/CMSIS/Core/Include -Icmsis_c5/Include -DSTM32C5A3xx
+CFLAGS += -mcpu=cortex-m33 -mthumb -mfpu=fpv5-sp-d16 -mfloat-abi=hard $(CFLAGS_EXTRA)
+LDFLAGS ?= -Tlink.ld -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections
+
+SOURCES = main.c hal.c
+SOURCES += cmsis_c5/Source/startup_stm32c5a3xx.c
+SOURCES += $(MGDIR)/mongoose.c
+
+all build example: firmware.bin
+
+firmware.elf: cmsis_core cmsis_c5 hal.h link.ld Makefile $(SOURCES) $(MGDIR)/mongoose.h mongoose_config.h
+	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(CFLAGS_EXTRA) $(LDFLAGS) -o $@
+
+firmware.bin: firmware.elf
+	arm-none-eabi-objcopy -O binary $< $@
+	@echo
+	@echo "To flash, run 'make flash', or use STM32CubeProgrammer"
+
+firmware.signed.bin: firmware.bin
+	test -f private.pem || node $(MGDIR)/resources/sign.js keygen
+	node $(MGDIR)/resources/sign.js sign firmware.bin
+
+# Show all symbols sorted by size
+show_symbols_sorted_by_size: firmware.bin
+	arm-none-eabi-readelf -sW firmware.elf | sed 1,3d | sed 's,^.*: ,,' | tr -s ' ' | cut -d ' ' -f 2,7 | sort -nk1 | grep -v '^0 '
+
+# If the board gets stuck: STM32_Programmer_CLI -c port=swd -e all mode=UR
+flash: firmware.bin
+	STM32_Programmer_CLI -c port=swd -w firmware.elf mode=UR -rst
+
+cmsis_core:
+	git clone -q -c advice.detachedHead=false --depth 1 -b v6.4.0 https://github.com/ARM-software/CMSIS_6 $@
+
+cmsis_c5:
+	git clone -q -c advice.detachedHead=false --depth 1 -b 2.1.0 https://github.com/STMicroelectronics/stm32c5xx-dfp $@
+
+clean:
+	rm -rf firmware.* cmsis_*

tutorials/stm32/nucleo-c5a3zg/minimal/hal.c

@@ -0,0 +1,141 @@
+// Copyright (c) 2026 Cesanta Software Limited
+// All rights reserved
+
+#include "hal.h"
+
+// Added to minimise the bin size: avoid pulling printf and friends
+void __assert_func(const char *s, int line, const char *fn, const char *expr) {
+  (void) s, (void) line, (void) fn, (void) expr;
+  for (;;) (void) 0;  // or trigger the fault handler
+}
+
+bool hal_timer_expired(volatile uint64_t *t, uint64_t period, uint64_t now) {
+  uint64_t diff = now - *t;         // Wrap-safe elapsed time since last expiry
+  if (period == 0) return false;    // Avoid division by zero
+  if (diff < period) return false;  // Period has not elapsed yet
+  *t += (diff / period) * period;   // Preserve cadence, skip missed periods
+  return true;
+}
+
+static volatile uint64_t s_ticks;  // Milliseconds since boot
+void SysTick_Handler(void) {       // SyStick IRQ handler, triggered every 1ms
+  s_ticks++;
+}
+
+uint64_t hal_get_tick(void) {
+  return s_ticks;
+};
+
+uint32_t SystemCoreClock = 160000000;
+void SystemInit(void) {  // Called automatically by startup code
+  hal_system_init();     // Enable FPU
+  hal_clock_init();
+  SysTick_Config(SystemCoreClock / 1000);  // Sys tick every 1ms
+}
+
+void ExitRun0Mode(void) {
+}
+
+// C library entry, called by the CMSIS startup code after it copies .data
+// and clears .bss. See __cmsis_start() in cmsis_gcc_m.h
+extern int main(void);
+extern void __libc_init_array(void);
+__attribute__((noreturn)) void _start(void) {
+  __libc_init_array();
+  main();
+  for (;;) (void) 0;
+}
+
+struct stat;
+__attribute__((weak)) int _fstat(int fd, struct stat *st) {
+  (void) fd, (void) st;
+  return -1;
+}
+
+extern unsigned char _end[];  // End of data section, start of heap. See link.ld
+static unsigned char *s_current_heap_end = _end;
+
+size_t hal_ram_used(void) {
+  return (size_t) (s_current_heap_end - _end);
+}
+
+size_t hal_ram_free(void) {
+  unsigned char endofstack;
+  return (size_t) (&endofstack - s_current_heap_end);
+}
+
+void *_sbrk(int incr) {
+  unsigned char *prev_heap;
+  unsigned char *heap_end = (unsigned char *) ((size_t) &heap_end - 256);
+  prev_heap = s_current_heap_end;
+  // Check how much space we  got from the heap end to the stack end
+  if (s_current_heap_end + incr > heap_end) return (void *) -1;
+  s_current_heap_end += incr;
+  return prev_heap;
+}
+
+__attribute__((weak)) int _open(const char *path) {
+  (void) path;
+  return -1;
+}
+
+__attribute__((weak)) int _close(int fd) {
+  (void) fd;
+  return -1;
+}
+
+__attribute__((weak)) int _isatty(int fd) {
+  (void) fd;
+  return 1;
+}
+
+__attribute__((weak)) int _lseek(int fd, int ptr, int dir) {
+  (void) fd, (void) ptr, (void) dir;
+  return 0;
+}
+
+__attribute__((weak)) void _exit(int status) {
+  (void) status;
+  for (;;) asm volatile("BKPT #0");
+}
+
+__attribute__((weak)) void _kill(int pid, int sig) {
+  (void) pid, (void) sig;
+}
+
+__attribute__((weak)) int _getpid(void) {
+  return -1;
+}
+
+__attribute__((weak)) int _write(int fd, char *ptr, int len) {
+  (void) fd, (void) ptr, (void) len;
+  return -1;
+}
+
+__attribute__((weak)) int _read(int fd, char *ptr, int len) {
+  (void) fd, (void) ptr, (void) len;
+  return -1;
+}
+
+__attribute__((weak)) int _link(const char *a, const char *b) {
+  (void) a, (void) b;
+  return -1;
+}
+
+__attribute__((weak)) int _unlink(const char *a) {
+  (void) a;
+  return -1;
+}
+
+__attribute__((weak)) int _stat(const char *path, struct stat *st) {
+  (void) path, (void) st;
+  return -1;
+}
+
+__attribute__((weak)) int mkdir(const char *path, int mode) {
+  (void) path, (void) mode;
+  return -1;
+}
+
+__attribute__((weak)) void _init(void) {
+}

tutorials/stm32/nucleo-c5a3zg/minimal/hal.h

@@ -0,0 +1,165 @@
+// Copyright (c) 2013-2026 Cesanta Software Limited
+// Datasheet: RM0522, devboard manual: UM3616
+// https://www.st.com/resource/en/reference_manual/rm0522-stm32c5-series-armbased-32bit-mcus-stmicroelectronics.pdf
+// https://www.st.com/resource/en/user_manual/um3616-stm32c5-nucleo144-board-mb2310-stmicroelectronics.pdf
+
+#pragma once
+
+#include <stm32c5xx.h>
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+extern bool hal_timer_expired(volatile uint64_t *t, uint64_t prd, uint64_t now);
+extern uint64_t hal_get_tick(void);
+extern size_t hal_ram_free(void);
+extern size_t hal_ram_used(void);
+extern uint32_t SystemCoreClock;
+
+#define BIT(x) (1UL << (x))
+#define CLRSET(reg, clear, set) ((reg) = ((reg) & ~(clear)) | (set))
+#define PIN(bank, num) ((((bank) - 'A') << 8) | (num))
+#define PINNO(pin) (pin & 255)
+#define PINBANK(pin) (pin >> 8)
+
+// Ethernet RMII pins and their alternate functions. UM3616 7.11, Table 9
+#define HAL_ETH_PINS                  \
+  {PIN('A', 1), 10},  /* REF_CLK */ \
+  {PIN('C', 1), 10},  /* MDC */     \
+  {PIN('E', 12), 10}, /* MDIO */    \
+  {PIN('D', 1), 10},  /* CRS_DV */  \
+  {PIN('C', 4), 12},  /* RXD0 */    \
+  {PIN('C', 5), 13},  /* RXD1 */    \
+  {PIN('G', 11), 10}, /* TX_EN */   \
+  {PIN('G', 13), 10}, /* TXD0 */    \
+  {PIN('G', 12), 10}  /* TXD1 */
+
+// System clock (9.4.2, 9.4.8). HSI runs at 144 MHz, the maximum system clock:
+// SYSCLK = HSIS, no PLL. hclk = SYSCLK, APB clocks = hclk. After reset, the
+// system runs on HSIDIV3, 48 MHz. Flash latency for 144 MHz: 6.3.6, Table 20
+#define SYS_FREQUENCY 144000000
+#define AHB_FREQUENCY SYS_FREQUENCY
+#define APB2_FREQUENCY AHB_FREQUENCY
+#define APB1_FREQUENCY AHB_FREQUENCY
+#define HAL_FLASH_LATENCY (4 | FLASH_ACR_WRHIGHFREQ_1)  // 4 WS, WRHIGHFREQ 2
+
+enum { HAL_GPIO_MODE_INPUT, HAL_GPIO_MODE_OUTPUT, HAL_GPIO_MODE_AF, HAL_GPIO_MODE_ANALOG };
+enum { HAL_GPIO_OTYPE_PUSH_PULL, HAL_GPIO_OTYPE_OPEN_DRAIN };
+enum { HAL_GPIO_SPEED_LOW, HAL_GPIO_SPEED_MEDIUM, HAL_GPIO_SPEED_HIGH, HAL_GPIO_SPEED_INSANE };
+enum { HAL_GPIO_PULL_NONE, HAL_GPIO_PULL_UP, HAL_GPIO_PULL_DOWN };
+
+#define HAL_GPIO(N) ((GPIO_TypeDef *) (GPIOA_BASE + 0x400 * (N)))
+
+static GPIO_TypeDef *hal_gpio_bank(uint16_t pin) {
+  return HAL_GPIO(PINBANK(pin));
+}
+static inline void hal_gpio_toggle(uint16_t pin) {
+  GPIO_TypeDef *gpio = hal_gpio_bank(pin);
+  uint32_t mask = BIT(PINNO(pin));
+  gpio->BSRR = mask << (gpio->ODR & mask ? 16 : 0);
+}
+static inline int hal_gpio_read(uint16_t pin) {
+  return hal_gpio_bank(pin)->IDR & BIT(PINNO(pin)) ? 1 : 0;
+}
+static inline void hal_gpio_write(uint16_t pin, bool val) {
+  GPIO_TypeDef *gpio = hal_gpio_bank(pin);
+  gpio->BSRR = BIT(PINNO(pin)) << (val ? 0 : 16);
+}
+static inline void hal_gpio_init(uint16_t pin, uint8_t mode, uint8_t type,
+                             uint8_t speed, uint8_t pull, uint8_t af) {
+  GPIO_TypeDef *gpio = hal_gpio_bank(pin);
+  uint8_t n = (uint8_t) (PINNO(pin));
+  RCC->AHB2ENR |= BIT(PINBANK(pin));  // Enable GPIO clock
+  CLRSET(gpio->OTYPER, 1UL << n, ((uint32_t) type) << n);
+  CLRSET(gpio->OSPEEDR, 3UL << (n * 2), ((uint32_t) speed) << (n * 2));
+  CLRSET(gpio->PUPDR, 3UL << (n * 2), ((uint32_t) pull) << (n * 2));
+  CLRSET(gpio->AFR[n >> 3], 15UL << ((n & 7) * 4),
+          ((uint32_t) af) << ((n & 7) * 4));
+  CLRSET(gpio->MODER, 3UL << (n * 2), ((uint32_t) mode) << (n * 2));
+}
+static inline void hal_gpio_input(uint16_t pin) {
+  hal_gpio_init(pin, HAL_GPIO_MODE_INPUT, HAL_GPIO_OTYPE_PUSH_PULL, HAL_GPIO_SPEED_HIGH,
+      HAL_GPIO_PULL_NONE, 0);
+}
+static inline void hal_gpio_output(uint16_t pin) {
+  hal_gpio_init(pin, HAL_GPIO_MODE_OUTPUT, HAL_GPIO_OTYPE_PUSH_PULL, HAL_GPIO_SPEED_HIGH,
+      HAL_GPIO_PULL_NONE, 0);
+}
+
+// USART1 kernel clock defaults to pclk2 (APB2), USART2,3 default to pclk1
+// (APB1), see RCC_CCIPR1
+static inline void hal_uart_init(USART_TypeDef *uart, uint16_t tx,
+                                 uint16_t rx, unsigned long baud) {
+  uint8_t af = 7;           // Alternate function
+  uint32_t freq = 0;        // Bus frequency. UART1 is on APB2, rest on APB1
+
+  if (uart == USART1) freq = APB2_FREQUENCY, RCC->APB2ENR |= RCC_APB2ENR_USART1EN;
+  if (uart == USART2) freq = APB1_FREQUENCY, RCC->APB1LENR |= RCC_APB1LENR_USART2EN;
+  if (uart == USART3) freq = APB1_FREQUENCY, RCC->APB1LENR |= RCC_APB1LENR_USART3EN;
+
+  hal_gpio_init(tx, HAL_GPIO_MODE_AF, HAL_GPIO_OTYPE_PUSH_PULL, HAL_GPIO_SPEED_HIGH, 0, af);
+  hal_gpio_init(rx, HAL_GPIO_MODE_AF, HAL_GPIO_OTYPE_PUSH_PULL, HAL_GPIO_SPEED_HIGH, 0, af);
+  uart->CR1 = 0;                         // Disable this UART
+  uart->BRR = freq / baud;               // Set baud rate
+  uart->CR1 = BIT(0) | BIT(2) | BIT(3);  // Set UE, RE, TE
+}
+static inline void hal_uart_write_byte(USART_TypeDef *uart, uint8_t byte) {
+  uart->TDR = byte;
+  while ((uart->ISR & USART_ISR_TXE_TXFNF) == 0) (void) 0;
+}
+static inline void hal_uart_write_buf(USART_TypeDef *uart, char *buf, size_t len) {
+  while (len-- > 0) hal_uart_write_byte(uart, *(uint8_t *) buf++);
+}
+static inline int hal_uart_read_ready(USART_TypeDef *uart) {
+  return uart->ISR & BIT(5);  // If RXNE bit is set, data is ready
+}
+static inline uint8_t hal_uart_read_byte(USART_TypeDef *uart) {
+  return (uint8_t) (uart->RDR & 255);
+}
+
+// RNG clock (rng_clk) is CK48, which is disabled after reset. Use HSIDIV3,
+// 48 MHz. It stays enabled after the system clock switches to HSIS
+static inline void hal_rng_init(void) {
+  CLRSET(RCC->CCIPR2, RCC_CCIPR2_CK48SEL_Msk, RCC_CCIPR2_CK48SEL_1);
+  RCC->AHB2ENR |= RCC_AHB2ENR_RNGEN;  // Enable RNG AHB clock
+  RNG->CR |= RNG_CR_RNGEN;            // Enable RNG
+}
+
+static inline uint32_t hal_rng_read(void) {
+  while ((RNG->SR & RNG_SR_DRDY) == 0) (void) 0;
+  return RNG->DR;
+}
+
+static inline void hal_ethernet_init(void) {
+  // Initialise Ethernet. Enable MAC GPIO pins, see UM3616 Table 9
+  uint16_t pins[][2] = {HAL_ETH_PINS};
+  for (size_t i = 0; i < sizeof(pins) / sizeof(pins[0]); i++) {
+    hal_gpio_init(pins[i][0], HAL_GPIO_MODE_AF, HAL_GPIO_OTYPE_PUSH_PULL, HAL_GPIO_SPEED_INSANE,
+        HAL_GPIO_PULL_NONE, (uint8_t) pins[i][1]);
+  }
+  NVIC_EnableIRQ(ETH1_IRQn);          // Setup Ethernet IRQ handler
+  RCC->APB3ENR |= RCC_APB3ENR_SBSEN;  // Enable SBS clock
+  CLRSET(SBS->PMCR, SBS_PMCR_ETH1_SEL_PHY_Msk, SBS_PMCR_ETH1_SEL_PHY_2);  // RMII
+  RCC->AHB1ENR |= RCC_AHB1ENR_ETH1CKEN | RCC_AHB1ENR_ETH1EN |
+                  RCC_AHB1ENR_ETH1TXEN | RCC_AHB1ENR_ETH1RXEN;
+}
+
+static inline void hal_clock_init(void) {
+  CLRSET(FLASH->ACR, FLASH_ACR_LATENCY_Msk | FLASH_ACR_WRHIGHFREQ_Msk,
+         HAL_FLASH_LATENCY);
+  while ((FLASH->ACR & FLASH_ACR_LATENCY_Msk) != (HAL_FLASH_LATENCY & 15)) (void) 0;
+  RCC->CR1 |= RCC_CR1_HSISON;                        // Enable HSIS, 144 MHz
+  while ((RCC->CR1 & RCC_CR1_HSISRDY) == 0) (void) 0;  // Wait until ready
+  CLRSET(RCC->CFGR1, RCC_CFGR1_SW_Msk, RCC_CFGR1_SW_0);  // SYSCLK = HSIS
+  while ((RCC->CFGR1 & RCC_CFGR1_SWS_Msk) != RCC_CFGR1_SWS_0) (void) 0;
+  SystemCoreClock = SYS_FREQUENCY;         // Update SystemCoreClock global var
+  SysTick_Config(SystemCoreClock / 1000);  // Sys tick every 1ms
+}
+
+static inline void hal_system_init(void) {
+  SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2));  // Enable FPU
+  __DSB();
+  __ISB();
+}

tutorials/stm32/nucleo-c5a3zg/minimal/link.ld

@@ -0,0 +1,37 @@
+ENTRY(Reset_Handler);
+MEMORY {
+  flash(rx) : ORIGIN = 0x08000000, LENGTH = 1024k
+  sram(rwx) : ORIGIN = 0x20000000, LENGTH = 256k - 1k
+  health(rw) : ORIGIN = 0x2003fc00, LENGTH = 1k  /* Retained health record */
+}
+__StackTop = ORIGIN(sram) + LENGTH(sram);  /* End of RAM. stack points here */
+_estack = __StackTop;                      /* Used by the health fault handler */
+__StackLimit = __StackTop - 16384;         /* Stack limit, MSPLIM. TLS needs > 4 KB */
+
+SECTIONS {
+  .vectors  : { KEEP(*(.vectors)) }     > flash
+  .text     : { *(.text* .text.*) }     > flash
+  .rodata   : { *(.rodata*) }           > flash
+
+  /* Copy and zero tables for the CMSIS startup code, see __cmsis_start() */
+  .copy.table : {
+    __copy_table_start__ = .;
+    LONG(LOADADDR(.data)) LONG(ADDR(.data)) LONG(SIZEOF(.data) / 4)
+    __copy_table_end__ = .;
+  } > flash
+  .zero.table : {
+    __zero_table_start__ = .;
+    LONG(ADDR(.bss)) LONG(SIZEOF(.bss) / 4)
+    __zero_table_end__ = .;
+  } > flash
+
+  /* Note the .iram section, for functions copied to RAM. Required for MG_IRAM OTA support */
+  .data : { _sdata = .; *(.first_data) *(.iram .iram* .iram.*) *(.data SORT(.data.*)) . = ALIGN(4); _edata = .; } > sram AT > flash
+  _sidata = LOADADDR(.data);
+
+  .bss : { _sbss = .; *(.bss SORT(.bss.*) COMMON) . = ALIGN(4); _ebss = .; } > sram
+  _end = ALIGN(_ebss, 8);  /* Heap starts after .bss */
+
+  /* Retained health record. Startup code must neither copy nor clear it. */
+  .mg_health (NOLOAD) : { KEEP(*(.mg_health .mg_health*)) } > health
+}

tutorials/stm32/nucleo-c5a3zg/minimal/main.c

@@ -0,0 +1,115 @@
+// Copyright (c) 2026 Cesanta Software Limited
+// All rights reserved
+
+#include "hal.h"
+#include "mongoose.h"
+
+#define UART_DEBUG USART2              // ST-LINK virtual COM port, UM3616 7.12
+#define UART_DEBUG_TX_PIN PIN('A', 2)
+#define UART_DEBUG_RX_PIN PIN('A', 3)
+
+#define LED1 PIN('A', 5)  // Green, on when high. UM3616 7.8
+#define LED2 PIN('G', 1)  // Red, on when low
+#define LED3 PIN('G', 2)  // Blue, on when low
+
+static void log_fn(char ch, void *param) {
+  hal_uart_write_buf(param, &ch, 1);
+}
+
+static void blink_task(void) {
+  static uint64_t blink_timer = 0;
+  if (hal_timer_expired(&blink_timer, 500, hal_get_tick())) {
+    hal_gpio_toggle(LED2);
+  }
+}
+
+uint64_t mg_millis(void) {
+  return hal_get_tick();
+}
+
+bool mg_random(void *buf, size_t len) {
+  for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
+    uint32_t r = hal_rng_read();
+    memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
+  }
+  return true;
+}
+
+// Self-signed P-256 certificate and key for the HTTPS listener. Created by:
+//   openssl ecparam -genkey -name prime256v1 -noout -out key.pem
+//   openssl req -x509 -key key.pem -out cert.pem -days 3650 -subj /CN=mg
+#define TLS_CERT                                                       \
+  "-----BEGIN CERTIFICATE-----\n"                                      \
+  "MIIBgjCCASegAwIBAgIUIJOq77Qn7lHbH6WseMemeqorR50wCgYIKoZIzj0EAwIw\n" \
+  "FjEUMBIGA1UEAwwLbnVjbGVvLWg3MjMwHhcNMjYxMDEyMTUwMjE5WhcNMzYxMDA5\n" \
+  "MTUwMjE5WjAWMRQwEgYDVQQDDAtudWNsZW8taDcyMzBZMBMGByqGSM49AgEGCCqG\n" \
+  "SM49AwEHA0IABB6IQJNmzrsdQL+2BnZYS7GYOaj7sz8f6cjBmz3n8D9Em19XodlU\n" \
+  "uy4ybIvyhr766lL0ERoTmMUivb/lGmzx9C+jUzBRMB0GA1UdDgQWBBQqxMuc4gj7\n" \
+  "MTMzreWlRMNI3QMqTzAfBgNVHSMEGDAWgBQqxMuc4gj7MTMzreWlRMNI3QMqTzAP\n" \
+  "BgNVHRMBAf8EBTADAQH/MAoGCCqGSM49BAMCA0kAMEYCIQDY4xaJpuxq6b3rHK3b\n" \
+  "lOIQyfkQX+orCRqQUkseplqpqwIhAKswZFNn+2zUNRRNY8+cHmdIwmdpsmxtoWYP\n" \
+  "BCjX++LI\n"                                                         \
+  "-----END CERTIFICATE-----\n"
+
+#define TLS_KEY                                                        \
+  "-----BEGIN EC PRIVATE KEY-----\n"                                   \
+  "MHcCAQEEIJ/GBl0TlD52q9PMg1KWaNIdXqp8b/HyIsABmBpqC+O1oAoGCCqGSM49\n" \
+  "AwEHoUQDQgAEHohAk2bOux1Av7YGdlhLsZg5qPuzPx/pyMGbPefwP0SbX1eh2VS7\n" \
+  "LjJsi/KGvvrqUvQRGhOYxSK9v+UabPH0Lw==\n"                             \
+  "-----END EC PRIVATE KEY-----\n"
+
+static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
+  if (ev == MG_EV_ACCEPT && c->is_tls) {  // Accepted on the https:// listener
+    struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
+                               .key = mg_str(TLS_KEY)};
+    mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {
+      mg_http_reply(c, 200, "", "{%m:%llu}\n", MG_ESC("tick"), hal_get_tick());
+    } else if (mg_match(hm->uri, mg_str("/api/crash"), NULL)) {
+      __asm volatile("udf #0");  // Trigger HardFault
+    } else {
+      mg_http_reply(c, 200, "",
+                    "Hi from Mongoose!\n"
+                    "tick:     %llu\n"
+                    "ram used: %zu\n"
+                    "ram free: %zu\n",
+                    hal_get_tick(), hal_ram_used(), hal_ram_free());
+    }
+  }
+}
+
+int main(void) {
+  MG_HEALTH_INIT();
+
+  hal_clock_init();
+  hal_uart_init(UART_DEBUG, UART_DEBUG_TX_PIN, UART_DEBUG_RX_PIN, 115200);
+  mg_log_set_fn(log_fn, UART_DEBUG);
+  hal_rng_init();
+  hal_ethernet_init();
+  hal_gpio_output(LED1);
+  hal_gpio_output(LED2);
+  hal_gpio_output(LED3);
+
+  struct mg_mgr mgr;
+  mg_mgr_init(&mgr);
+  mg_http_listen(&mgr, "http://0.0.0.0", http_ev_handler, NULL);
+  mg_http_listen(&mgr, "https://0.0.0.0", http_ev_handler, NULL);
+
+  MG_INFO(("Initialised. CPU clock: %lu MHz", SystemCoreClock / 1000000));
+  MG_INFO(("RAM used: %zu, free: %zu", hal_ram_used(), hal_ram_free()));
+  MG_INFO(("Crash record: %M", mg_print_crash_record));
+
+  for (;;) {
+    mg_mgr_poll(&mgr, 0);
+    blink_task();
+  }
+
+  return 0;
+}

tutorials/stm32/nucleo-c5a3zg/minimal/mongoose_config.h

@@ -0,0 +1,32 @@
+#pragma once
+#include "hal.h"
+
+// See https://mongoose.ws/docs/getting-started/build-environment/
+#define MG_ARCH MG_ARCH_ARMGCC
+#define MG_TLS MG_TLS_BUILTIN
+#define MG_OTA MG_OTA_STM32C5
+
+#define MG_ENABLE_TCPIP 1
+#define MG_ENABLE_CUSTOM_MILLIS 1
+#define MG_ENABLE_CUSTOM_RANDOM 1
+#define MG_ENABLE_DRIVER_STM32C 1
+
+// Construct MAC address from the MCU unique ID
+#define MGUID ((uint32_t *) UID_BASE)
+#define MG_SET_MAC_ADDRESS(mac)      \
+  do {                               \
+    mac[0] = 2;                      \
+    mac[1] = MGUID[0] & 255;         \
+    mac[2] = (MGUID[0] >> 10) & 255; \
+    mac[3] = (MGUID[0] >> 19) & 255; \
+    mac[4] = MGUID[1] & 255;         \
+    mac[5] = MGUID[2] & 255;         \
+  } while (0)
+
+// Crash report support. Health record lives in the .mg_health region, see link.ld
+#define MG_ENABLE_HEALTH 1
+
+// mdash.net device management service support
+#define MG_ENABLE_MDASH 0
+#define MG_MDASH_KEY "..."  // Set this - mDash device token
+#define MG_FIRMWARE_VERSION "c5a3.1.0.0"

tutorials/stm32/nucleo-f429zi/minimal-rndis/main.c

@@ -66,7 +66,12 @@ static bool usb_poll(struct mg_tcpip_if *ifp, bool s1) {
 }
 
 static void fn(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) {
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/debug"), NULL)) {
       int level = mg_json_get_long(hm->body, "$.level", MG_LL_DEBUG);

tutorials/stm32/nucleo-f429zi/minimal/main.c

@@ -68,6 +68,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/stm32/nucleo-f746zg/minimal-pppoe/main.c

@@ -28,7 +28,12 @@ bool mg_random(void *buf, size_t len) {  // Use on-board RNG
 
 
 static void fn(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) {
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     (void) hm;
     mg_http_reply(c, 200, "", "hi\n");

tutorials/stm32/nucleo-f746zg/minimal-rndis/main.c

@@ -66,7 +66,12 @@ static bool usb_poll(struct mg_tcpip_if *ifp, bool s1) {
 }
 
 static void fn(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_HTTP_MSG) {
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/debug"), NULL)) {
       int level = mg_json_get_long(hm->body, "$.level", MG_LL_DEBUG);

tutorials/stm32/nucleo-f746zg/minimal/main.c

@@ -68,6 +68,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/stm32/nucleo-f756zg/minimal/main.c

@@ -68,6 +68,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {  // New HTTP request received
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/stm32/nucleo-g031k8/minimal-w5500/main.c

@@ -47,7 +47,12 @@ static void timer_fn(void *arg) {
 
 static void fn(struct mg_connection *c, int ev, void *ev_data) {
   struct mg_tcpip_if *ifp = (struct mg_tcpip_if *) c->fn_data;
-  if (ev == MG_EV_HTTP_MSG) {
+  if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
+  } else if (ev == MG_EV_HTTP_MSG) {
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/hello"),
                  NULL)) {  // Request to /api/hello

tutorials/stm32/nucleo-h563zi/minimal/main.c

@@ -68,6 +68,11 @@ static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
     struct mg_tls_opts opts = {.cert = mg_str(TLS_CERT),
                                .key = mg_str(TLS_KEY)};
     mg_tls_init(c, &opts);
+  } else if (ev == MG_EV_HTTP_HDRS) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/ota"), NULL)) {
+      mg_http_stream_body(c, hm, mg_http_ota_cb, NULL);
+    }
   } else if (ev == MG_EV_HTTP_MSG) {
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
     if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {

tutorials/stm32/nucleo-h723zg/cubemx-freertos/.mxproject

@@ -1,28 +0,0 @@
-[PreviousGenFiles]
-AdvancedFolderStructure=true
-HeaderFileListSize=4
-HeaderFiles#0=..\Core\Inc\FreeRTOSConfig.h
-HeaderFiles#1=..\Core\Inc\stm32h7xx_it.h
-HeaderFiles#2=..\Core\Inc\stm32h7xx_hal_conf.h
-HeaderFiles#3=..\Core\Inc\main.h
-HeaderFolderListSize=1
-HeaderPath#0=..\Core\Inc
-HeaderFiles=;
-SourceFileListSize=5
-SourceFiles#0=..\Core\Src\freertos.c
-SourceFiles#1=..\Core\Src\stm32h7xx_it.c
-SourceFiles#2=..\Core\Src\stm32h7xx_hal_msp.c
-SourceFiles#3=..\Core\Src\stm32h7xx_hal_timebase_tim.c
-SourceFiles#4=..\Core\Src\main.c
-SourceFolderListSize=1
-SourcePath#0=..\Core\Src
-SourceFiles=;
-
-[PreviousLibFiles]
-LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rng.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rng_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rng.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_syscall_numbers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\newlib-freertos.h;Middlewares\Third_Party\FreeRTOS\Source\include\picolibc-freertos.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Drivers\CMSIS\RTOS2\Include\cmsis_os2.h;Drivers\CMSIS\RTOS2\Include\os_tick.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_Line truncated
-
-[PreviousUsedCMakes]
-SourceFiles=Core\Src\main.c;Core\Src\freertos.c;Core\Src\stm32h7xx_it.c;Core\Src\stm32h7xx_hal_msp.c;Core\Src\stm32h7xx_hal_timebase_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rng.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rng_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Middlewares\Third_Party\FreeRTOS\Source\portable\Common\mpu_wrappers_v2.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;Core\Src\system_stm32h7xx.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rng.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rng_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Middlewares\Third_Party\FreeRTOS\Source\portable\Common\mpu_wrappers_v2.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;Core\Src\system_stm32h7xx.c;;;Middlewares\Third_Party\FreeRTOS\Source\portable\Common\mpu_wrappers_v2.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;
-HeaderPath=Drivers\STM32H7xx_HAL_Driver\Inc;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;Middlewares\Third_Party\FreeRTOS\Source\include;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F;Drivers\CMSIS\RTOS2\Include;Drivers\CMSIS\Device\ST\STM32H7xx\Include;Drivers\CMSIS\Include;Core\Inc;
-CDefines=USE_PWR_LDO_SUPPLY;USE_HAL_DRIVER;STM32H723xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
-

tutorials/stm32/nucleo-h723zg/cubemx-freertos/CMakeLists.txt

@@ -1,78 +0,0 @@
-cmake_minimum_required(VERSION 3.22)
-
-#
-# This file is generated only once,
-# and is not re-generated if converter is called multiple times.
-#
-# User is free to modify the file as much as necessary
-#
-
-# Setup compiler settings
-set(CMAKE_C_STANDARD 11)
-set(CMAKE_C_STANDARD_REQUIRED ON)
-set(CMAKE_C_EXTENSIONS ON)
-
-
-# Define the build type
-if(NOT CMAKE_BUILD_TYPE)
-    set(CMAKE_BUILD_TYPE "Debug")
-endif()
-
-# Set the project name
-set(CMAKE_PROJECT_NAME nucleo-h723zg)
-
-# Enable compile command to ease indexing with e.g. clangd
-set(CMAKE_EXPORT_COMPILE_COMMANDS TRUE)
-
-# Core project settings
-project(${CMAKE_PROJECT_NAME})
-message("Build type: " ${CMAKE_BUILD_TYPE})
-
-# Enable CMake support for ASM and C languages
-enable_language(C ASM)
-
-# Create an executable object type
-add_executable(${CMAKE_PROJECT_NAME})
-
-# Add STM32CubeMX generated sources
-add_subdirectory(cmake/stm32cubemx)
-
-# Link directories setup
-target_link_directories(${CMAKE_PROJECT_NAME} PRIVATE
-    # Add user defined library search paths
-)
-
-# Add sources to executable
-target_sources(${CMAKE_PROJECT_NAME} PRIVATE
-    # Add user sources here
-    #${CMAKE_SOURCE_DIR}/../../../../mongoose.c
-    ${CMAKE_SOURCE_DIR}/mongoose/mongoose.c
-)
-
-# Add include paths
-target_include_directories(${CMAKE_PROJECT_NAME} PRIVATE
-    # Add user defined include paths
-    ${CMAKE_SOURCE_DIR}/mongoose/
-    #${CMAKE_SOURCE_DIR}/../../../../
-)
-
-# Add project symbols (macros)
-target_compile_definitions(${CMAKE_PROJECT_NAME} PRIVATE
-    # Add user defined symbols
-)
-
-# Remove wrong libob.a library dependency when using cpp files
-list(REMOVE_ITEM CMAKE_C_IMPLICIT_LINK_LIBRARIES ob)
-
-# Add linked libraries
-target_link_libraries(${CMAKE_PROJECT_NAME}
-    stm32cubemx
-
-    # Add user defined libraries
-)
-
-# Generate .bin from .elf
-add_custom_command(TARGET ${CMAKE_PROJECT_NAME} POST_BUILD
-    COMMAND arm-none-eabi-objcopy -O binary $<TARGET_FILE:${CMAKE_PROJECT_NAME}> ${CMAKE_PROJECT_NAME}.bin
-    VERBATIM
-)

tutorials/stm32/nucleo-h723zg/cubemx-freertos/CMakePresets.json

@@ -1,38 +0,0 @@
-{
-    "version": 3,
-    "configurePresets": [
-        {
-            "name": "default",
-            "hidden": true,
-            "generator": "Ninja",
-            "binaryDir": "${sourceDir}/build/${presetName}",
-		    "toolchainFile": "${sourceDir}/cmake/gcc-arm-none-eabi.cmake",
-            "cacheVariables": {
-            }
-        },
-        {
-            "name": "Debug",
-            "inherits": "default",
-            "cacheVariables": {
-                "CMAKE_BUILD_TYPE": "Debug"
-            }
-        },
-        {
-            "name": "Release",
-            "inherits": "default",
-            "cacheVariables": {
-                "CMAKE_BUILD_TYPE": "Release"
-            }
-        }
-    ],
-    "buildPresets": [
-        {
-            "name": "Debug",
-            "configurePreset": "Debug"
-        },
-        {
-            "name": "Release",
-            "configurePreset": "Release"
-        }
-    ]
-}

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Inc/FreeRTOSConfig.h

@@ -1,171 +0,0 @@
-/* USER CODE BEGIN Header */
-/*
- * FreeRTOS Kernel V10.6.2
- * Portion Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- * Portion Copyright (C) 2019 StMicroelectronics, Inc.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE .
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-/* USER CODE END Header */
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * These parameters and more are described within the 'configuration' section of the
- * FreeRTOS API documentation available on the FreeRTOS.org web site.
- *
- * See http://www.freertos.org/a00110.html
- *----------------------------------------------------------*/
-
-/* USER CODE BEGIN Includes */
-/* Section where include file can be added */
-/* USER CODE END Includes */
-
-/* Ensure definitions are only used by the compiler, and not by the assembler. */
-#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
-#include <stdint.h>
-extern uint32_t SystemCoreClock;
-#endif
-#ifndef CMSIS_device_header
-#define CMSIS_device_header "stm32h7xx.h"
-#endif /* CMSIS_device_header */
-
-#define configENABLE_FPU                         0
-#define configENABLE_MPU                         0
-
-#define configUSE_PREEMPTION                     1
-#define configSUPPORT_STATIC_ALLOCATION          1
-#define configSUPPORT_DYNAMIC_ALLOCATION         1
-#define configUSE_IDLE_HOOK                      0
-#define configUSE_TICK_HOOK                      0
-#define configCPU_CLOCK_HZ                       ( SystemCoreClock )
-#define configTICK_RATE_HZ                       ((TickType_t)1000)
-#define configMAX_PRIORITIES                     ( 56 )
-#define configUSE_SB_COMPLETED_CALLBACK          ( 0 )
-#define configUSE_MINI_LIST_ITEM                ( 1 )
-#define configMINIMAL_STACK_SIZE                 ((uint16_t)128)
-#define configTOTAL_HEAP_SIZE                    ((size_t)65536)
-#define configMAX_TASK_NAME_LEN                  ( 16 )
-#define configHEAP_CLEAR_MEMORY_ON_FREE          0
-#define configUSE_TRACE_FACILITY                 1
-#define configUSE_16_BIT_TICKS                   0
-#define configUSE_MUTEXES                        1
-#define configQUEUE_REGISTRY_SIZE                8
-#define configUSE_RECURSIVE_MUTEXES              1
-#define configUSE_COUNTING_SEMAPHORES            1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION  0
-/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */
-/* Defaults to size_t for backward compatibility, but can be changed
-   if lengths will always be less than the number of bytes in a size_t. */
-#define configMESSAGE_BUFFER_LENGTH_TYPE         size_t
-/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                    0
-#define configMAX_CO_ROUTINE_PRIORITIES          ( 2 )
-
-/* Software timer definitions. */
-#define configUSE_TIMERS                         1
-#define configTIMER_TASK_PRIORITY                ( 2 )
-#define configTIMER_QUEUE_LENGTH                 10
-#define configTIMER_TASK_STACK_DEPTH             256
-
-/* CMSIS-RTOS V2 flags */
-#define configUSE_OS2_THREAD_SUSPEND_RESUME  1
-#define configUSE_OS2_THREAD_ENUMERATE       1
-#define configUSE_OS2_EVENTFLAGS_FROM_ISR    1
-#define configUSE_OS2_THREAD_FLAGS           1
-#define configUSE_OS2_TIMER                  1
-#define configUSE_OS2_MUTEX                  1
-/* Set the following definitions to 1 to include the API function, or zero
-to exclude the API function. */
-#define INCLUDE_vTaskPrioritySet             1
-#define INCLUDE_uxTaskPriorityGet            1
-#define INCLUDE_vTaskDelete                  1
-#define INCLUDE_vTaskCleanUpResources        0
-#define INCLUDE_vTaskSuspend                 1
-#define INCLUDE_xTaskDelayUntil              1
-#define INCLUDE_vTaskDelay                   1
-#define INCLUDE_xTaskGetSchedulerState       1
-#define INCLUDE_xTimerPendFunctionCall       1
-#define INCLUDE_xQueueGetMutexHolder         1
-#define INCLUDE_uxTaskGetStackHighWaterMark  1
-#define INCLUDE_xTaskGetCurrentTaskHandle    1
-#define INCLUDE_eTaskGetState                1
-
-/*
- * The CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used
- * by the application thus the correct define need to be enabled below
- */
-#define USE_FreeRTOS_HEAP_4
-
-/* Cortex-M specific definitions. */
-#ifdef __NVIC_PRIO_BITS
- /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
- #define configPRIO_BITS         __NVIC_PRIO_BITS
-#else
- #define configPRIO_BITS         4
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority"
-function. */
-
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY   15
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* Normal assert() semantics without relying on the provision of an assert.h
-header file. */
-/* USER CODE BEGIN 1 */
-#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );}
-/* USER CODE END 1 */
-
-/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
-standard names. */
-#define vPortSVCHandler    SVC_Handler
-#define xPortPendSVHandler PendSV_Handler
-/* IMPORTANT: After 10.3.1 update, Systick_Handler comes from NVIC (if SYS timebase = systick), otherwise from cmsis_os2.c */
-
-#define USE_CUSTOM_SYSTICK_HANDLER_IMPLEMENTATION 0
-
-/* USER CODE BEGIN Defines */
-/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
-/* USER CODE END Defines */
-
-#endif /* FREERTOS_CONFIG_H */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Inc/main.h

@@ -1,69 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.h
-  * @brief          : Header for main.c file.
-  *                   This file contains the common defines of the application.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2026 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __MAIN_H
-#define __MAIN_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32h7xx_hal.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void Error_Handler(void);
-
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-/* Private defines -----------------------------------------------------------*/
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MAIN_H */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Inc/stm32h7xx_hal_conf.h

@@ -1,514 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32h7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32H7xx_HAL_CONF_H
-#define STM32H7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-
-  /* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_FDCAN_MODULE_ENABLED   */
-/* #define HAL_FMAC_MODULE_ENABLED   */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_COMP_MODULE_ENABLED   */
-/* #define HAL_CORDIC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED   */
-/* #define HAL_DMA2D_MODULE_ENABLED   */
-#define HAL_ETH_MODULE_ENABLED
-/* #define HAL_ETH_LEGACY_MODULE_ENABLED   */
-/* #define HAL_NAND_MODULE_ENABLED   */
-/* #define HAL_NOR_MODULE_ENABLED   */
-/* #define HAL_OTFDEC_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED   */
-/* #define HAL_SDRAM_MODULE_ENABLED   */
-/* #define HAL_HASH_MODULE_ENABLED   */
-/* #define HAL_HRTIM_MODULE_ENABLED   */
-/* #define HAL_HSEM_MODULE_ENABLED   */
-/* #define HAL_GFXMMU_MODULE_ENABLED   */
-/* #define HAL_JPEG_MODULE_ENABLED   */
-/* #define HAL_OPAMP_MODULE_ENABLED   */
-/* #define HAL_OSPI_MODULE_ENABLED   */
-/* #define HAL_I2S_MODULE_ENABLED   */
-/* #define HAL_SMBUS_MODULE_ENABLED   */
-/* #define HAL_IWDG_MODULE_ENABLED   */
-/* #define HAL_LPTIM_MODULE_ENABLED   */
-/* #define HAL_LTDC_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
-/* #define HAL_RAMECC_MODULE_ENABLED   */
-#define HAL_RNG_MODULE_ENABLED
-/* #define HAL_RTC_MODULE_ENABLED   */
-/* #define HAL_SAI_MODULE_ENABLED   */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_MMC_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED   */
-/* #define HAL_SPI_MODULE_ENABLED   */
-/* #define HAL_SWPMI_MODULE_ENABLED   */
-#define HAL_TIM_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED   */
-/* #define HAL_IRDA_MODULE_ENABLED   */
-/* #define HAL_SMARTCARD_MODULE_ENABLED   */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-/* #define HAL_PCD_MODULE_ENABLED   */
-/* #define HAL_HCD_MODULE_ENABLED   */
-/* #define HAL_DFSDM_MODULE_ENABLED   */
-/* #define HAL_DSI_MODULE_ENABLED   */
-/* #define HAL_JPEG_MODULE_ENABLED   */
-/* #define HAL_MDIOS_MODULE_ENABLED   */
-/* #define HAL_PSSI_MODULE_ENABLED   */
-/* #define HAL_DTS_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_MDMA_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_EXTI_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#define HAL_HSEM_MODULE_ENABLED
-
-/* ########################## Oscillator Values adaptation ####################*/
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-#define HSE_VALUE    (25000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100UL)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal  oscillator (CSI) default value.
-  *        This value is the default CSI value after Reset.
-  */
-#if !defined  (CSI_VALUE)
-  #define CSI_VALUE    (4000000UL) /*!< Value of the Internal oscillator in Hz*/
-#endif /* CSI_VALUE */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (64000000UL) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  *        This value is used by the UART, RTC HAL module to compute the system frequency
-  */
-#if !defined  (LSE_VALUE)
-  #define LSE_VALUE    (32768UL) /*!< Value of the External oscillator in Hz*/
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000UL)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-#if !defined  (LSI_VALUE)
-  #define LSI_VALUE  (32000UL)              /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                              The real value may vary depending on the variations
-                                              in voltage and temperature.*/
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    12288000UL /*!< Value of the External clock in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300UL) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (15UL) /*!< tick interrupt priority */
-#define  USE_RTOS                     0
-#define  USE_SD_TRANSCEIVER           0U               /*!< use uSD Transceiver */
-#define  USE_SPI_CRC	              0U               /*!< use CRC in SPI */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS     0U /* ADC register callback disabled     */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS     0U /* CEC register callback disabled     */
-#define  USE_HAL_COMP_REGISTER_CALLBACKS    0U /* COMP register callback disabled    */
-#define  USE_HAL_CORDIC_REGISTER_CALLBACKS  0U /* CORDIC register callback disabled  */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS    0U /* CRYP register callback disabled    */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS     0U /* DAC register callback disabled     */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS    0U /* DCMI register callback disabled    */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled   */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled   */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS     0U /* DSI register callback disabled     */
-#define  USE_HAL_DTS_REGISTER_CALLBACKS     0U /* DTS register callback disabled     */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS     0U /* ETH register callback disabled     */
-#define  USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled   */
-#define  USE_HAL_FMAC_REGISTER_CALLBACKS    0U /* FMAC register callback disabled  */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS    0U /* NAND register callback disabled    */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS     0U /* NOR register callback disabled     */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled   */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS    0U /* SRAM register callback disabled    */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS    0U /* HASH register callback disabled    */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS     0U /* HCD register callback disabled     */
-#define  USE_HAL_GFXMMU_REGISTER_CALLBACKS  0U /* GFXMMU register callback disabled  */
-#define  USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled   */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS     0U /* I2C register callback disabled     */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS     0U /* I2S register callback disabled     */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS    0U /* IRDA register callback disabled    */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS    0U /* JPEG register callback disabled    */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled   */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS    0U /* LTDC register callback disabled    */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS     0U /* MMC register callback disabled     */
-#define  USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
-#define  USE_HAL_OSPI_REGISTER_CALLBACKS    0U /* OSPI register callback disabled    */
-#define  USE_HAL_OTFDEC_REGISTER_CALLBACKS  0U /* OTFDEC register callback disabled  */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS     0U /* PCD register callback disabled     */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS    0U /* QSPI register callback disabled    */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS     0U /* RNG register callback disabled     */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS     0U /* RTC register callback disabled     */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS     0U /* SAI register callback disabled     */
-#define  USE_HAL_SD_REGISTER_CALLBACKS      0U /* SD register callback disabled      */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled   */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS     0U /* SPI register callback disabled     */
-#define  USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled   */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS     0U /* TIM register callback disabled     */
-#define  USE_HAL_UART_REGISTER_CALLBACKS    0U /* UART register callback disabled    */
-#define  USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled   */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS    0U /* WWDG register callback disabled    */
-
-/* ########################### Ethernet Configuration ######################### */
-#define ETH_TX_DESC_CNT         4U  /* number of Ethernet Tx DMA descriptors */
-#define ETH_RX_DESC_CNT         4U  /* number of Ethernet Rx DMA descriptors */
-
-#define ETH_MAC_ADDR0    (0x02UL)
-#define ETH_MAC_ADDR1    (0x00UL)
-#define ETH_MAC_ADDR2    (0x00UL)
-#define ETH_MAC_ADDR3    (0x00UL)
-#define ETH_MAC_ADDR4    (0x00UL)
-#define ETH_MAC_ADDR5    (0x00UL)
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32h7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32h7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32h7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_MDMA_MODULE_ENABLED
- #include "stm32h7xx_hal_mdma.h"
-#endif /* HAL_MDMA_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
-  #include "stm32h7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32h7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32h7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
-  #include "stm32h7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
-  #include "stm32h7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DTS_MODULE_ENABLED
- #include "stm32h7xx_hal_dts.h"
-#endif /* HAL_DTS_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32h7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
-  #include "stm32h7xx_hal_eth_legacy.h"
-#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32h7xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32h7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32h7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_FDCAN_MODULE_ENABLED
-  #include "stm32h7xx_hal_fdcan.h"
-#endif /* HAL_FDCAN_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32h7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
-  #include "stm32h7xx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CORDIC_MODULE_ENABLED
-  #include "stm32h7xx_hal_cordic.h"
-#endif /* HAL_CORDIC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32h7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32h7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32h7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32h7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_GFXMMU_MODULE_ENABLED
-  #include "stm32h7xx_hal_gfxmmu.h"
-#endif /* HAL_GFXMMU_MODULE_ENABLED */
-
-#ifdef HAL_FMAC_MODULE_ENABLED
-  #include "stm32h7xx_hal_fmac.h"
-#endif /* HAL_FMAC_MODULE_ENABLED */
-
-#ifdef HAL_HRTIM_MODULE_ENABLED
-  #include "stm32h7xx_hal_hrtim.h"
-#endif /* HAL_HRTIM_MODULE_ENABLED */
-
-#ifdef HAL_HSEM_MODULE_ENABLED
-  #include "stm32h7xx_hal_hsem.h"
-#endif /* HAL_HSEM_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32h7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32h7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32h7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32h7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32h7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32h7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32h7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32h7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32h7xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
-#include "stm32h7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
-#include "stm32h7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_OPAMP_MODULE_ENABLED
-#include "stm32h7xx_hal_opamp.h"
-#endif /* HAL_OPAMP_MODULE_ENABLED */
-
-#ifdef HAL_OSPI_MODULE_ENABLED
- #include "stm32h7xx_hal_ospi.h"
-#endif /* HAL_OSPI_MODULE_ENABLED */
-
-#ifdef HAL_OTFDEC_MODULE_ENABLED
-#include "stm32h7xx_hal_otfdec.h"
-#endif /* HAL_OTFDEC_MODULE_ENABLED */
-
-#ifdef HAL_PSSI_MODULE_ENABLED
- #include "stm32h7xx_hal_pssi.h"
-#endif /* HAL_PSSI_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32h7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32h7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RAMECC_MODULE_ENABLED
- #include "stm32h7xx_hal_ramecc.h"
-#endif /* HAL_RAMECC_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32h7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32h7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32h7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32h7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
- #include "stm32h7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32h7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32h7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SWPMI_MODULE_ENABLED
- #include "stm32h7xx_hal_swpmi.h"
-#endif /* HAL_SWPMI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32h7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32h7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32h7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32h7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32h7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32h7xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32h7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32h7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32h7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t *file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32H7xx_HAL_CONF_H */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Inc/stm32h7xx_it.h

@@ -1,60 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32h7xx_it.h
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2026 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32H7xx_IT_H
-#define __STM32H7xx_IT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void NMI_Handler(void);
-void DebugMon_Handler(void);
-void TIM6_DAC_IRQHandler(void);
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32H7xx_IT_H */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/freertos.c

@@ -1,59 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * File Name          : freertos.c
-  * Description        : Code for freertos applications
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2026 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "FreeRTOS.h"
-#include "task.h"
-#include "main.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN Variables */
-
-/* USER CODE END Variables */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN FunctionPrototypes */
-
-/* USER CODE END FunctionPrototypes */
-
-/* Private application code --------------------------------------------------*/
-/* USER CODE BEGIN Application */
-
-/* USER CODE END Application */
-

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/main.c

@@ -1,541 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.c
-  * @brief          : Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2026 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "string.h"
-#include "FreeRTOS.h"
-#include "cmsis_os2.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-#include "mongoose.h"
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-#if defined ( __ICCARM__ ) /*!< IAR Compiler */
-#pragma location=0x30000000
-ETH_DMADescTypeDef  DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
-#pragma location=0x30000080
-ETH_DMADescTypeDef  DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
-
-#elif defined ( __CC_ARM )  /* MDK ARM Compiler */
-
-__attribute__((at(0x30000000))) ETH_DMADescTypeDef  DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
-__attribute__((at(0x30000080))) ETH_DMADescTypeDef  DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
-
-#elif defined ( __GNUC__ ) /* GNU Compiler */
-
-ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDescripSection"))); /* Ethernet Rx DMA Descriptors */
-ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDescripSection")));   /* Ethernet Tx DMA Descriptors */
-#endif
-
-ETH_TxPacketConfig TxConfig;
-
-ETH_HandleTypeDef heth;
-
-RNG_HandleTypeDef hrng;
-
-UART_HandleTypeDef huart3;
-
-/* Definitions for defaultTask */
-osThreadId_t defaultTaskHandle;
-const osThreadAttr_t defaultTask_attributes = {
-  .name = "defaultTask",
-  .stack_size = MG_HEALTH_STACK_TOTAL,
-  .priority = (osPriority_t) osPriorityNormal,
-};
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-static void MPU_Config(void);
-static void MX_GPIO_Init(void);
-static void MX_ETH_Init(void);
-static void MX_RNG_Init(void);
-static void MX_USART3_UART_Init(void);
-void StartDefaultTask(void *argument);
-
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-static void log_fn(char ch, void *param) {
-  HAL_UART_Transmit(param, (unsigned char *) &ch, 1, HAL_MAX_DELAY);
-}
-
-static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
- if (ev == MG_EV_HTTP_MSG) {
-    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
-    if (mg_match(hm->uri, mg_str("/api/tick"), NULL)) {
-      mg_http_reply(c, 200, "", "{%m:%lu}\n", MG_ESC("tick"), HAL_GetTick());
-    } else if (mg_match(hm->uri, mg_str("/api/kill"), NULL)) {
-      SCB->SHCSR &= ~SCB_SHCSR_USGFAULTENA_Msk;
-      __asm volatile("udf #0");
-    } else {
-      mg_http_reply(c, 200, "Content-Type: text/plain\r\n",
-                    "Hi from Mongoose, tick %lu\n"
-                    "stack %zu/%zu bytes, heap %zu/%zu bytes\n",
-                    (unsigned long) HAL_GetTick(),
-                    (size_t) MG_HEALTH_STACK_USED, (size_t) MG_HEALTH_STACK_TOTAL,
-                    (size_t) MG_HEALTH_HEAP_USED, (size_t) MG_HEALTH_HEAP_TOTAL);
-    }
-  }
-}
-/* USER CODE END 0 */
-
-/**
-  * @brief  The application entry point.
-  * @retval int
-  */
-int main(void)
-{
-
-  /* USER CODE BEGIN 1 */
-  MG_HEALTH_INIT();
-  /* USER CODE END 1 */
-
-  /* MPU Configuration--------------------------------------------------------*/
-  MPU_Config();
-
-  /* MCU Configuration--------------------------------------------------------*/
-
-  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-  HAL_Init();
-
-  /* USER CODE BEGIN Init */
-
-  /* USER CODE END Init */
-
-  /* Configure the system clock */
-  SystemClock_Config();
-
-  /* USER CODE BEGIN SysInit */
-
-  /* USER CODE END SysInit */
-
-  /* Initialize all configured peripherals */
-  MX_GPIO_Init();
-  MX_ETH_Init();
-  MX_RNG_Init();
-  MX_USART3_UART_Init();
-  /* USER CODE BEGIN 2 */
-
-  /* USER CODE END 2 */
-
-  /* Init scheduler */
-  osKernelInitialize();
-
-  /* USER CODE BEGIN RTOS_MUTEX */
-  /* add mutexes, ... */
-  /* USER CODE END RTOS_MUTEX */
-
-  /* USER CODE BEGIN RTOS_SEMAPHORES */
-  /* add semaphores, ... */
-  /* USER CODE END RTOS_SEMAPHORES */
-
-  /* USER CODE BEGIN RTOS_TIMERS */
-  /* start timers, add new ones, ... */
-  /* USER CODE END RTOS_TIMERS */
-
-  /* USER CODE BEGIN RTOS_QUEUES */
-  /* add queues, ... */
-  /* USER CODE END RTOS_QUEUES */
-
-  /* Create the thread(s) */
-  /* creation of defaultTask */
-  defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
-
-  /* USER CODE BEGIN RTOS_THREADS */
-  /* add threads, ... */
-  /* USER CODE END RTOS_THREADS */
-
-  /* USER CODE BEGIN RTOS_EVENTS */
-  /* add events, ... */
-  /* USER CODE END RTOS_EVENTS */
-
-  /* Start scheduler */
-  osKernelStart();
-
-  /* We should never get here as control is now taken by the scheduler */
-
-  /* Infinite loop */
-  /* USER CODE BEGIN WHILE */
-  while (1)
-  {
-    /* USER CODE END WHILE */
-
-    /* USER CODE BEGIN 3 */
-  }
-  /* USER CODE END 3 */
-}
-
-/**
-  * @brief System Clock Configuration
-  * @retval None
-  */
-void SystemClock_Config(void)
-{
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-
-  /** Supply configuration update enable
-  */
-  HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
-
-  /** Configure the main internal regulator output voltage
-  */
-  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
-
-  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
-
-  /** Initializes the RCC Oscillators according to the specified parameters
-  * in the RCC_OscInitTypeDef structure.
-  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48|RCC_OSCILLATORTYPE_HSI;
-  RCC_OscInitStruct.HSIState = RCC_HSI_DIV1;
-  RCC_OscInitStruct.HSICalibrationValue = 64;
-  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
-  RCC_OscInitStruct.PLL.PLLM = 4;
-  RCC_OscInitStruct.PLL.PLLN = 34;
-  RCC_OscInitStruct.PLL.PLLP = 1;
-  RCC_OscInitStruct.PLL.PLLQ = 2;
-  RCC_OscInitStruct.PLL.PLLR = 2;
-  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_3;
-  RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
-  RCC_OscInitStruct.PLL.PLLFRACN = 3072;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /** Initializes the CPU, AHB and APB buses clocks
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
-                              |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
-  RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
-  RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
-  RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
-
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-}
-
-/**
-  * @brief ETH Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_ETH_Init(void)
-{
-
-  /* USER CODE BEGIN ETH_Init 0 */
-
-  /* USER CODE END ETH_Init 0 */
-
-   static uint8_t MACAddr[6];
-
-  /* USER CODE BEGIN ETH_Init 1 */
-
-  /* USER CODE END ETH_Init 1 */
-  heth.Instance = ETH;
-  MACAddr[0] = 0x00;
-  MACAddr[1] = 0x80;
-  MACAddr[2] = 0xE1;
-  MACAddr[3] = 0x00;
-  MACAddr[4] = 0x00;
-  MACAddr[5] = 0x00;
-  heth.Init.MACAddr = &MACAddr[0];
-  heth.Init.MediaInterface = HAL_ETH_RMII_MODE;
-  heth.Init.TxDesc = DMATxDscrTab;
-  heth.Init.RxDesc = DMARxDscrTab;
-  heth.Init.RxBuffLen = 1536;
-
-  /* USER CODE BEGIN MACADDRESS */
-
-  /* USER CODE END MACADDRESS */
-
-  if (HAL_ETH_Init(&heth) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN ETH_Init 2 */
-
-  /* USER CODE END ETH_Init 2 */
-
-}
-
-/**
-  * @brief RNG Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_RNG_Init(void)
-{
-
-  /* USER CODE BEGIN RNG_Init 0 */
-
-  /* USER CODE END RNG_Init 0 */
-
-  /* USER CODE BEGIN RNG_Init 1 */
-
-  /* USER CODE END RNG_Init 1 */
-  hrng.Instance = RNG;
-  hrng.Init.ClockErrorDetection = RNG_CED_ENABLE;
-  if (HAL_RNG_Init(&hrng) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN RNG_Init 2 */
-
-  /* USER CODE END RNG_Init 2 */
-
-}
-
-/**
-  * @brief USART3 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_USART3_UART_Init(void)
-{
-
-  /* USER CODE BEGIN USART3_Init 0 */
-
-  /* USER CODE END USART3_Init 0 */
-
-  /* USER CODE BEGIN USART3_Init 1 */
-
-  /* USER CODE END USART3_Init 1 */
-  huart3.Instance = USART3;
-  huart3.Init.BaudRate = 115200;
-  huart3.Init.WordLength = UART_WORDLENGTH_8B;
-  huart3.Init.StopBits = UART_STOPBITS_1;
-  huart3.Init.Parity = UART_PARITY_NONE;
-  huart3.Init.Mode = UART_MODE_TX_RX;
-  huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-  huart3.Init.OverSampling = UART_OVERSAMPLING_16;
-  huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
-  huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1;
-  huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
-  if (HAL_UART_Init(&huart3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_UARTEx_SetTxFifoThreshold(&huart3, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_UARTEx_SetRxFifoThreshold(&huart3, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_UARTEx_DisableFifoMode(&huart3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN USART3_Init 2 */
-
-  /* USER CODE END USART3_Init 2 */
-
-}
-
-/**
-  * @brief GPIO Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_GPIO_Init(void)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  /* USER CODE BEGIN MX_GPIO_Init_1 */
-
-  /* USER CODE END MX_GPIO_Init_1 */
-
-  /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-  __HAL_RCC_GPIOG_CLK_ENABLE();
-  __HAL_RCC_GPIOE_CLK_ENABLE();
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_0|GPIO_PIN_14, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOE, GPIO_PIN_1, GPIO_PIN_RESET);
-
-  /*Configure GPIO pins : PB0 PB14 */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_14;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PE1 */
-  GPIO_InitStruct.Pin = GPIO_PIN_1;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN MX_GPIO_Init_2 */
-
-  /* USER CODE END MX_GPIO_Init_2 */
-}
-
-/* USER CODE BEGIN 4 */
-
-/* USER CODE END 4 */
-
-/* USER CODE BEGIN Header_StartDefaultTask */
-/**
-  * @brief  Function implementing the defaultTask thread.
-  * @param  argument: Not used
-  * @retval None
-  */
-/* USER CODE END Header_StartDefaultTask */
-void StartDefaultTask(void *argument)
-{
-  /* USER CODE BEGIN 5 */
-  struct mg_mgr mgr;
-  (void) argument;
-  mg_log_set_fn(log_fn, &huart3);
-  mg_mgr_init(&mgr);
-  mg_http_listen(&mgr, "http://0.0.0.0", http_ev_handler, NULL);
-
-  /* Infinite loop */
-  for(;;)
-  {
-    mg_mgr_poll(&mgr, 0);
-    osDelay(1);
-  }
-  /* USER CODE END 5 */
-}
-
- /* MPU Configuration */
-
-void MPU_Config(void)
-{
-  MPU_Region_InitTypeDef MPU_InitStruct = {0};
-
-  /* Disables the MPU */
-  HAL_MPU_Disable();
-
-  /** Initializes and configures the Region and the memory to be protected
-  */
-  MPU_InitStruct.Enable = MPU_REGION_ENABLE;
-  MPU_InitStruct.Number = MPU_REGION_NUMBER0;
-  MPU_InitStruct.BaseAddress = 0x0;
-  MPU_InitStruct.Size = MPU_REGION_SIZE_4GB;
-  MPU_InitStruct.SubRegionDisable = 0x87;
-  MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
-  MPU_InitStruct.AccessPermission = MPU_REGION_NO_ACCESS;
-  MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;
-  MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE;
-  MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
-  MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
-
-  HAL_MPU_ConfigRegion(&MPU_InitStruct);
-  /* Enables the MPU */
-  HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
-
-}
-
-/**
-  * @brief  Period elapsed callback in non blocking mode
-  * @note   This function is called  when TIM6 interrupt took place, inside
-  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
-  * a global variable "uwTick" used as application time base.
-  * @param  htim : TIM handle
-  * @retval None
-  */
-void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
-{
-  /* USER CODE BEGIN Callback 0 */
-
-  /* USER CODE END Callback 0 */
-  if (htim->Instance == TIM6)
-  {
-    HAL_IncTick();
-  }
-  /* USER CODE BEGIN Callback 1 */
-
-  /* USER CODE END Callback 1 */
-}
-
-/**
-  * @brief  This function is executed in case of error occurrence.
-  * @retval None
-  */
-void Error_Handler(void)
-{
-  /* USER CODE BEGIN Error_Handler_Debug */
-  /* User can add his own implementation to report the HAL error return state */
-  __disable_irq();
-  while (1)
-  {
-  }
-  /* USER CODE END Error_Handler_Debug */
-}
-#ifdef USE_FULL_ASSERT
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t *file, uint32_t line)
-{
-  /* USER CODE BEGIN 6 */
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-  /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/stm32h7xx_hal_msp.c

@@ -1,329 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file         stm32h7xx_hal_msp.c
-  * @brief        This file provides code for the MSP Initialization
-  *               and de-Initialization codes.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2026 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN Define */
-
-/* USER CODE END Define */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN Macro */
-
-/* USER CODE END Macro */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* External functions --------------------------------------------------------*/
-/* USER CODE BEGIN ExternalFunctions */
-
-/* USER CODE END ExternalFunctions */
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-/**
-  * Initializes the Global MSP.
-  */
-void HAL_MspInit(void)
-{
-
-  /* USER CODE BEGIN MspInit 0 */
-
-  /* USER CODE END MspInit 0 */
-
-  __HAL_RCC_SYSCFG_CLK_ENABLE();
-
-  /* System interrupt init*/
-  /* PendSV_IRQn interrupt configuration */
-  HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
-
-  /* USER CODE BEGIN MspInit 1 */
-
-  /* USER CODE END MspInit 1 */
-}
-
-/**
-  * @brief ETH MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param heth: ETH handle pointer
-  * @retval None
-  */
-void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(heth->Instance==ETH)
-  {
-    /* USER CODE BEGIN ETH_MspInit 0 */
-
-    /* USER CODE END ETH_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_ETH1MAC_CLK_ENABLE();
-    __HAL_RCC_ETH1TX_CLK_ENABLE();
-    __HAL_RCC_ETH1RX_CLK_ENABLE();
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**ETH GPIO Configuration
-    PC1     ------> ETH_MDC
-    PA1     ------> ETH_REF_CLK
-    PA2     ------> ETH_MDIO
-    PA7     ------> ETH_CRS_DV
-    PC4     ------> ETH_RXD0
-    PC5     ------> ETH_RXD1
-    PB13     ------> ETH_TXD1
-    PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
-    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = GPIO_PIN_13;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_13;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
-    HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN ETH_MspInit 1 */
-
-    /* USER CODE END ETH_MspInit 1 */
-
-  }
-
-}
-
-/**
-  * @brief ETH MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param heth: ETH handle pointer
-  * @retval None
-  */
-void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
-{
-  if(heth->Instance==ETH)
-  {
-    /* USER CODE BEGIN ETH_MspDeInit 0 */
-
-    /* USER CODE END ETH_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_ETH1MAC_CLK_DISABLE();
-    __HAL_RCC_ETH1TX_CLK_DISABLE();
-    __HAL_RCC_ETH1RX_CLK_DISABLE();
-
-    /**ETH GPIO Configuration
-    PC1     ------> ETH_MDC
-    PA1     ------> ETH_REF_CLK
-    PA2     ------> ETH_MDIO
-    PA7     ------> ETH_CRS_DV
-    PC4     ------> ETH_RXD0
-    PC5     ------> ETH_RXD1
-    PB13     ------> ETH_TXD1
-    PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0
-    */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
-
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7);
-
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
-
-    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_11|GPIO_PIN_13);
-
-    /* USER CODE BEGIN ETH_MspDeInit 1 */
-
-    /* USER CODE END ETH_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief RNG MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param hrng: RNG handle pointer
-  * @retval None
-  */
-void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
-{
-  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
-  if(hrng->Instance==RNG)
-  {
-    /* USER CODE BEGIN RNG_MspInit 0 */
-
-    /* USER CODE END RNG_MspInit 0 */
-
-  /** Initializes the peripherals clock
-  */
-    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RNG;
-    PeriphClkInitStruct.RngClockSelection = RCC_RNGCLKSOURCE_HSI48;
-    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
-    {
-      Error_Handler();
-    }
-
-    /* Peripheral clock enable */
-    __HAL_RCC_RNG_CLK_ENABLE();
-    /* USER CODE BEGIN RNG_MspInit 1 */
-
-    /* USER CODE END RNG_MspInit 1 */
-
-  }
-
-}
-
-/**
-  * @brief RNG MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param hrng: RNG handle pointer
-  * @retval None
-  */
-void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
-{
-  if(hrng->Instance==RNG)
-  {
-    /* USER CODE BEGIN RNG_MspDeInit 0 */
-
-    /* USER CODE END RNG_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_RNG_CLK_DISABLE();
-    /* USER CODE BEGIN RNG_MspDeInit 1 */
-
-    /* USER CODE END RNG_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief UART MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param huart: UART handle pointer
-  * @retval None
-  */
-void HAL_UART_MspInit(UART_HandleTypeDef* huart)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
-  if(huart->Instance==USART3)
-  {
-    /* USER CODE BEGIN USART3_MspInit 0 */
-
-    /* USER CODE END USART3_MspInit 0 */
-
-  /** Initializes the peripherals clock
-  */
-    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART3;
-    PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
-    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
-    {
-      Error_Handler();
-    }
-
-    /* Peripheral clock enable */
-    __HAL_RCC_USART3_CLK_ENABLE();
-
-    __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration
-    PD8     ------> USART3_TX
-    PD9     ------> USART3_RX
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
-    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN USART3_MspInit 1 */
-
-    /* USER CODE END USART3_MspInit 1 */
-
-  }
-
-}
-
-/**
-  * @brief UART MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param huart: UART handle pointer
-  * @retval None
-  */
-void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
-{
-  if(huart->Instance==USART3)
-  {
-    /* USER CODE BEGIN USART3_MspDeInit 0 */
-
-    /* USER CODE END USART3_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_USART3_CLK_DISABLE();
-
-    /**USART3 GPIO Configuration
-    PD8     ------> USART3_TX
-    PD9     ------> USART3_RX
-    */
-    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9);
-
-    /* USER CODE BEGIN USART3_MspDeInit 1 */
-
-    /* USER CODE END USART3_MspDeInit 1 */
-  }
-
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/stm32h7xx_hal_timebase_tim.c

@@ -1,131 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32h7xx_hal_timebase_tim.c
-  * @brief   HAL time base based on the hardware TIM.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2026 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32h7xx_hal.h"
-#include "stm32h7xx_hal_tim.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-TIM_HandleTypeDef        htim6;
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief  This function configures the TIM6 as a time base source.
-  *         The time source is configured  to have 1ms time base with a dedicated
-  *         Tick interrupt priority.
-  * @note   This function is called  automatically at the beginning of program after
-  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
-  * @param  TickPriority: Tick interrupt priority.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
-{
-  RCC_ClkInitTypeDef    clkconfig;
-  uint32_t              uwTimclock, uwAPB1Prescaler;
-  uint32_t              uwPrescalerValue;
-  uint32_t              pFLatency;
-
-  /*Configure the TIM6 IRQ priority */
-  if (TickPriority < (1UL << __NVIC_PRIO_BITS))
-   {
-     HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority ,0);
-
-     /* Enable the TIM6 global Interrupt */
-     HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
-     uwTickPrio = TickPriority;
-    }
-  else
-  {
-    return HAL_ERROR;
-  }
-
-  /* Enable TIM6 clock */
-  __HAL_RCC_TIM6_CLK_ENABLE();
-
-  /* Get clock configuration */
-  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
-
-  /* Get APB1 prescaler */
-  uwAPB1Prescaler = clkconfig.APB1CLKDivider;
-  /* Compute TIM6 clock */
-  if (uwAPB1Prescaler == RCC_HCLK_DIV1)
-  {
-    uwTimclock = HAL_RCC_GetPCLK1Freq();
-  }
-  else
-  {
-    uwTimclock = 2UL * HAL_RCC_GetPCLK1Freq();
-  }
-
-  /* Compute the prescaler value to have TIM6 counter clock equal to 1MHz */
-  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
-
-  /* Initialize TIM6 */
-  htim6.Instance = TIM6;
-
-  /* Initialize TIMx peripheral as follow:
-   * Period = [(TIM6CLK/1000) - 1]. to have a (1/1000) s time base.
-   * Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
-   * ClockDivision = 0
-   * Counter direction = Up
-   */
-  htim6.Init.Period = (1000000U / 1000U) - 1U;
-  htim6.Init.Prescaler = uwPrescalerValue;
-  htim6.Init.ClockDivision = 0;
-  htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
-
-  if(HAL_TIM_Base_Init(&htim6) == HAL_OK)
-  {
-
-    /* Start the TIM time Base generation in interrupt mode */
-    return HAL_TIM_Base_Start_IT(&htim6);
-  }
-
-  /* Return function status */
-  return HAL_ERROR;
-}
-
-/**
-  * @brief  Suspend Tick increment.
-  * @note   Disable the tick increment by disabling TIM6 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_SuspendTick(void)
-{
-  /* Disable TIM6 update Interrupt */
-  __HAL_TIM_DISABLE_IT(&htim6, TIM_IT_UPDATE);
-}
-
-/**
-  * @brief  Resume Tick increment.
-  * @note   Enable the tick increment by Enabling TIM6 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_ResumeTick(void)
-{
-  /* Enable TIM6 Update interrupt */
-  __HAL_TIM_ENABLE_IT(&htim6, TIM_IT_UPDATE);
-}
-

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/stm32h7xx_it.c

@@ -1,118 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32h7xx_it.c
-  * @brief   Interrupt Service Routines.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2026 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "stm32h7xx_it.h"
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/* External variables --------------------------------------------------------*/
-extern TIM_HandleTypeDef htim6;
-
-/* USER CODE BEGIN EV */
-
-/* USER CODE END EV */
-
-/******************************************************************************/
-/*           Cortex Processor Interruption and Exception Handlers          */
-/******************************************************************************/
-/**
-  * @brief This function handles Non maskable interrupt.
-  */
-void NMI_Handler(void)
-{
-  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
-
-  /* USER CODE END NonMaskableInt_IRQn 0 */
-  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
-   while (1)
-  {
-  }
-  /* USER CODE END NonMaskableInt_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Debug monitor.
-  */
-void DebugMon_Handler(void)
-{
-  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
-
-  /* USER CODE END DebugMonitor_IRQn 0 */
-  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
-
-  /* USER CODE END DebugMonitor_IRQn 1 */
-}
-
-/******************************************************************************/
-/* STM32H7xx Peripheral Interrupt Handlers                                    */
-/* Add here the Interrupt Handlers for the used peripherals.                  */
-/* For the available peripheral interrupt handler names,                      */
-/* please refer to the startup file (startup_stm32h7xx.s).                    */
-/******************************************************************************/
-
-/**
-  * @brief This function handles TIM6 global interrupt, DAC1_CH1 and DAC1_CH2 underrun error interrupts.
-  */
-void TIM6_DAC_IRQHandler(void)
-{
-  /* USER CODE BEGIN TIM6_DAC_IRQn 0 */
-
-  /* USER CODE END TIM6_DAC_IRQn 0 */
-  HAL_TIM_IRQHandler(&htim6);
-  /* USER CODE BEGIN TIM6_DAC_IRQn 1 */
-
-  /* USER CODE END TIM6_DAC_IRQn 1 */
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/syscalls.c

@@ -1,244 +0,0 @@
-/**
- ******************************************************************************
- * @file      syscalls.c
- * @author    Auto-generated by STM32CubeMX
- * @brief     Minimal System calls file
- *
- *            For more information about which c-functions
- *            need which of these lowlevel functions
- *            please consult the Newlib or Picolibc libc-manual
- ******************************************************************************
- * @attention
- *
- * Copyright (c) 2020-2025 STMicroelectronics.
- * All rights reserved.
- *
- * This software is licensed under terms that can be found in the LICENSE file
- * in the root directory of this software component.
- * If no LICENSE file comes with this software, it is provided AS-IS.
- *
- ******************************************************************************
- */
-
-/* Includes */
-#include <sys/stat.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <stdio.h>
-#include <signal.h>
-#include <time.h>
-#include <sys/time.h>
-#include <sys/times.h>
-
-
-/* Variables */
-extern int __io_putchar(int ch) __attribute__((weak));
-extern int __io_getchar(void) __attribute__((weak));
-
-
-char *__env[1] = { 0 };
-char **environ = __env;
-
-
-/* Functions */
-void initialise_monitor_handles()
-{
-}
-
-int _getpid(void)
-{
-  return 1;
-}
-
-int _kill(int pid, int sig)
-{
-  (void)pid;
-  (void)sig;
-  errno = EINVAL;
-  return -1;
-}
-
-void _exit (int status)
-{
-  _kill(status, -1);
-  while (1) {}    /* Make sure we hang here */
-}
-
-__attribute__((weak)) int _read(int file, char *ptr, int len)
-{
-  (void)file;
-  int DataIdx;
-
-  for (DataIdx = 0; DataIdx < len; DataIdx++)
-  {
-    *ptr++ = __io_getchar();
-  }
-
-  return len;
-}
-
-__attribute__((weak)) int _write(int file, char *ptr, int len)
-{
-  (void)file;
-  int DataIdx;
-
-  for (DataIdx = 0; DataIdx < len; DataIdx++)
-  {
-    __io_putchar(*ptr++);
-  }
-  return len;
-}
-
-int _close(int file)
-{
-  (void)file;
-  return -1;
-}
-
-
-int _fstat(int file, struct stat *st)
-{
-  (void)file;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-int _isatty(int file)
-{
-  (void)file;
-  return 1;
-}
-
-int _lseek(int file, int ptr, int dir)
-{
-  (void)file;
-  (void)ptr;
-  (void)dir;
-  return 0;
-}
-
-int _open(char *path, int flags, ...)
-{
-  (void)path;
-  (void)flags;
-  /* Pretend like we always fail */
-  return -1;
-}
-
-int _wait(int *status)
-{
-  (void)status;
-  errno = ECHILD;
-  return -1;
-}
-
-int _unlink(char *name)
-{
-  (void)name;
-  errno = ENOENT;
-  return -1;
-}
-
-clock_t _times(struct tms *buf)
-{
-  (void)buf;
-  return -1;
-}
-
-int _stat(const char *file, struct stat *st)
-{
-  (void)file;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-int _link(char *old, char *new)
-{
-  (void)old;
-  (void)new;
-  errno = EMLINK;
-  return -1;
-}
-
-int _fork(void)
-{
-  errno = EAGAIN;
-  return -1;
-}
-
-int _execve(char *name, char **argv, char **env)
-{
-  (void)name;
-  (void)argv;
-  (void)env;
-  errno = ENOMEM;
-  return -1;
-}
-
-// --- Picolibc Specific Section ---
-#if defined(__PICOLIBC__)
-
-/**
- * @brief Picolibc helper function to output a character to a FILE stream.
- *        This redirects the output to the low-level __io_putchar function.
- * @param c Character to write.
- * @param file FILE stream pointer (ignored).
- * @retval int The character written.
- */
-static int starm_putc(char c, FILE *file)
-{
-	(void) file;
-  __io_putchar(c);
-	return c;
-}
-
-/**
- * @brief Picolibc helper function to input a character from a FILE stream.
- *        This redirects the input from the low-level __io_getchar function.
- * @param file FILE stream pointer (ignored).
- * @retval int The character read, cast to an unsigned char then int.
- */
-static int starm_getc(FILE *file)
-{
-	unsigned char c;
-	(void) file;
-  c = __io_getchar();
-	return c;
-}
-
-// Define and initialize the standard I/O streams for Picolibc.
-// FDEV_SETUP_STREAM connects the starm_putc and starm_getc helper functions to a FILE structure.
-// _FDEV_SETUP_RW indicates the stream is for reading and writing.
-static FILE __stdio = FDEV_SETUP_STREAM(starm_putc,
-					starm_getc,
-					NULL,
-					_FDEV_SETUP_RW);
-
-// Assign the standard stream pointers (stdin, stdout, stderr) to the initialized stream.
-// Picolibc uses these pointers for standard I/O operations (printf, scanf, etc.).
-FILE *const stdin = &__stdio;
-__strong_reference(stdin, stdout);
-__strong_reference(stdin, stderr);
-
-// Create strong aliases mapping standard C library function names (without underscore)
-// to the implemented system call stubs (with underscore). Picolibc uses these
-// standard names internally, so this linking is required.
-__strong_reference(_read, read);
-__strong_reference(_write, write);
-__strong_reference(_times, times);
-__strong_reference(_execve, execve);
-__strong_reference(_fork, fork);
-__strong_reference(_link, link);
-__strong_reference(_unlink, unlink);
-__strong_reference(_stat, stat);
-__strong_reference(_wait, wait);
-__strong_reference(_open, open);
-__strong_reference(_close, close);
-__strong_reference(_lseek, lseek);
-__strong_reference(_isatty, isatty);
-__strong_reference(_fstat, fstat);
-__strong_reference(_exit, exit);
-__strong_reference(_kill, kill);
-__strong_reference(_getpid, getpid);
-
-#endif //__PICOLIBC__

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/sysmem.c

@@ -1,87 +0,0 @@
-/**
- ******************************************************************************
- * @file      sysmem.c
- * @author    Generated by STM32CubeMX
- * @brief     System Memory calls file
- *
- *            For more information about which C functions
- *            need which of these lowlevel functions
- *            please consult the Newlib or Picolibc libc manual
- ******************************************************************************
- * @attention
- *
- * Copyright (c) 2025 STMicroelectronics.
- * All rights reserved.
- *
- * This software is licensed under terms that can be found in the LICENSE file
- * in the root directory of this software component.
- * If no LICENSE file comes with this software, it is provided AS-IS.
- *
- ******************************************************************************
- */
-
-/* Includes */
-#include <errno.h>
-#include <stdint.h>
-#include <stddef.h>
-
-/**
- * Pointer to the current high watermark of the heap usage
- */
-static uint8_t *__sbrk_heap_end = NULL;
-
-/**
- * @brief _sbrk() allocates memory to the newlib heap and is used by malloc
- *        and others from the C library
- *
- * @verbatim
- * ############################################################################
- * #  .data  #  .bss  #       newlib heap       #          MSP stack          #
- * #         #        #                         # Reserved by _Min_Stack_Size #
- * ############################################################################
- * ^-- RAM start      ^-- _end                             _estack, RAM end --^
- * @endverbatim
- *
- * This implementation starts allocating at the '_end' linker symbol
- * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
- * The implementation considers '_estack' linker symbol to be RAM end
- * NOTE: If the MSP stack, at any point during execution, grows larger than the
- * reserved size, please increase the '_Min_Stack_Size'.
- *
- * @param incr Memory size
- * @return Pointer to allocated memory
- */
-void *_sbrk(ptrdiff_t incr)
-{
-  extern uint8_t _end; /* Symbol defined in the linker script */
-  extern uint8_t _estack; /* Symbol defined in the linker script */
-  extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
-  const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
-  const uint8_t *max_heap = (uint8_t *)stack_limit;
-  uint8_t *prev_heap_end;
-
-  /* Initialize heap end at first call */
-  if (NULL == __sbrk_heap_end)
-  {
-    __sbrk_heap_end = &_end;
-  }
-
-  /* Protect heap from growing into the reserved MSP stack */
-  if (__sbrk_heap_end + incr > max_heap)
-  {
-    errno = ENOMEM;
-    return (void *)-1;
-  }
-
-  prev_heap_end = __sbrk_heap_end;
-  __sbrk_heap_end += incr;
-
-  return (void *)prev_heap_end;
-}
-
-#if defined(__PICOLIBC__)
-  // Picolibc expects syscalls without the leading underscore.
-  // This creates a strong alias so that
-  // calls to `sbrk()` are resolved to our `_sbrk()` implementation.
-  __strong_reference(_sbrk, sbrk);
-#endif

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Core/Src/system_stm32h7xx.c

@@ -1,554 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32h7xx.c
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-Mx Device Peripheral Access Layer System Source File.
-  *
-  *   This file provides two functions and one global variable to be called from
-  *   user application:
-  *      - ExitRun0Mode(): Specifies the Power Supply source. This function is
-  *                        called at startup just after reset and before the call
-  *                        of SystemInit(). This call is made inside
-  *                        the "startup_stm32h7xx.s" file.
-  *
-  *      - SystemInit(): This function is called at startup just after reset and
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32h7xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock, it can be used
-  *                                  by the user application to setup the SysTick
-  *                                  timer or configure other parameters.
-  *
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32h7xx_system
-  * @{
-  */
-
-/** @addtogroup STM32H7xx_System_Private_Includes
-  * @{
-  */
-
-#include "stm32h7xx.h"
-#include <math.h>
-
-#if !defined  (HSE_VALUE)
-#define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (CSI_VALUE)
-  #define CSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* CSI_VALUE */
-
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32H7xx_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32H7xx_System_Private_Defines
-  * @{
-  */
-
-/************************* Miscellaneous Configuration ************************/
-/*!< Uncomment the following line if you need to use initialized data in D2 domain SRAM (AHB SRAM) */
-/* #define DATA_IN_D2_SRAM */
-
-/* Note: Following vector table addresses must be defined in line with linker
-         configuration. */
-/*!< Uncomment the following line if you need to relocate the vector table
-     anywhere in FLASH BANK1 or AXI SRAM, else the vector table is kept at the automatic
-     remap of boot address selected */
-/* #define USER_VECT_TAB_ADDRESS */
-
-#if defined(USER_VECT_TAB_ADDRESS)
-#if defined(DUAL_CORE) && defined(CORE_CM4)
-/*!< Uncomment the following line if you need to relocate your vector Table
-     in D2 AXI SRAM else user remap will be done in FLASH BANK2. */
-/* #define VECT_TAB_SRAM */
-#if defined(VECT_TAB_SRAM)
-#define VECT_TAB_BASE_ADDRESS   D2_AXISRAM_BASE   /*!< Vector Table base address field.
-                                                       This value must be a multiple of 0x400. */
-#else
-#define VECT_TAB_BASE_ADDRESS   FLASH_BANK2_BASE  /*!< Vector Table base address field.
-                                                       This value must be a multiple of 0x400. */
-#endif /* VECT_TAB_SRAM */
-#else
-/*!< Uncomment the following line if you need to relocate your vector Table
-     in D1 AXI SRAM else user remap will be done in FLASH BANK1. */
-/* #define VECT_TAB_SRAM */
-#if defined(VECT_TAB_SRAM)
-#define VECT_TAB_BASE_ADDRESS   D1_AXISRAM_BASE   /*!< Vector Table base address field.
-                                                       This value must be a multiple of 0x400. */
-#else
-#define VECT_TAB_BASE_ADDRESS   FLASH_BANK1_BASE  /*!< Vector Table base address field.
-                                                       This value must be a multiple of 0x400. */
-#endif /* VECT_TAB_SRAM */
-#endif /* DUAL_CORE && CORE_CM4 */
-
-#if !defined(VECT_TAB_OFFSET)
-#define VECT_TAB_OFFSET         0x00000000U       /*!< Vector Table base offset field.
-                                                       This value must be a multiple of 0x400. */
-#endif /* VECT_TAB_OFFSET */
-
-#endif /* USER_VECT_TAB_ADDRESS */
-/******************************************************************************/
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32H7xx_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32H7xx_System_Private_Variables
-  * @{
-  */
-  /* This variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
-  uint32_t SystemCoreClock = 64000000;
-  uint32_t SystemD2Clock = 64000000;
-  const  uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32H7xx_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the FPU setting and  vector table location
-  *         configuration.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-#if defined (DATA_IN_D2_SRAM)
- __IO uint32_t tmpreg;
-#endif /* DATA_IN_D2_SRAM */
-
-  /* FPU settings ------------------------------------------------------------*/
-  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-    SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2)));  /* set CP10 and CP11 Full Access */
-  #endif
-  /* Reset the RCC clock configuration to the default reset state ------------*/
-
-   /* Increasing the CPU frequency */
-  if(FLASH_LATENCY_DEFAULT  > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
-  {
-    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
-    MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
-  }
-
-  /* Set HSION bit */
-  RCC->CR |= RCC_CR_HSION;
-
-  /* Reset CFGR register */
-  RCC->CFGR = 0x00000000;
-
-  /* Reset HSEON, HSECSSON, CSION, HSI48ON, CSIKERON, PLL1ON, PLL2ON and PLL3ON bits */
-  RCC->CR &= 0xEAF6ED7FU;
-
-   /* Decreasing the number of wait states because of lower CPU frequency */
-  if(FLASH_LATENCY_DEFAULT  < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
-  {
-    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
-    MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
-  }
-
-#if defined(D3_SRAM_BASE)
-  /* Reset D1CFGR register */
-  RCC->D1CFGR = 0x00000000;
-
-  /* Reset D2CFGR register */
-  RCC->D2CFGR = 0x00000000;
-
-  /* Reset D3CFGR register */
-  RCC->D3CFGR = 0x00000000;
-#else
-  /* Reset CDCFGR1 register */
-  RCC->CDCFGR1 = 0x00000000;
-
-  /* Reset CDCFGR2 register */
-  RCC->CDCFGR2 = 0x00000000;
-
-  /* Reset SRDCFGR register */
-  RCC->SRDCFGR = 0x00000000;
-#endif
-  /* Reset PLLCKSELR register */
-  RCC->PLLCKSELR = 0x02020200;
-
-  /* Reset PLLCFGR register */
-  RCC->PLLCFGR = 0x01FF0000;
-  /* Reset PLL1DIVR register */
-  RCC->PLL1DIVR = 0x01010280;
-  /* Reset PLL1FRACR register */
-  RCC->PLL1FRACR = 0x00000000;
-
-  /* Reset PLL2DIVR register */
-  RCC->PLL2DIVR = 0x01010280;
-
-  /* Reset PLL2FRACR register */
-
-  RCC->PLL2FRACR = 0x00000000;
-  /* Reset PLL3DIVR register */
-  RCC->PLL3DIVR = 0x01010280;
-
-  /* Reset PLL3FRACR register */
-  RCC->PLL3FRACR = 0x00000000;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= 0xFFFBFFFFU;
-
-  /* Disable all interrupts */
-  RCC->CIER = 0x00000000;
-
-#if (STM32H7_DEV_ID == 0x450UL)
-  /* dual core CM7 or single core line */
-  if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U)
-  {
-    /* if stm32h7 revY*/
-    /* Change  the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */
-    *((__IO uint32_t*)0x51008108) = 0x000000001U;
-  }
-#endif /* STM32H7_DEV_ID */
-
-#if defined(DATA_IN_D2_SRAM)
-  /* in case of initialized data in D2 SRAM (AHB SRAM), enable the D2 SRAM clock (AHB SRAM clock) */
-#if defined(RCC_AHB2ENR_D2SRAM3EN)
-  RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN | RCC_AHB2ENR_D2SRAM3EN);
-#elif defined(RCC_AHB2ENR_D2SRAM2EN)
-  RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN);
-#else
-  RCC->AHB2ENR |= (RCC_AHB2ENR_AHBSRAM1EN | RCC_AHB2ENR_AHBSRAM2EN);
-#endif /* RCC_AHB2ENR_D2SRAM3EN */
-
-  tmpreg = RCC->AHB2ENR;
-  (void) tmpreg;
-#endif /* DATA_IN_D2_SRAM */
-
-#if defined(DUAL_CORE) && defined(CORE_CM4)
-  /* Configure the Vector Table location add offset address for cortex-M4 ------------------*/
-#if defined(USER_VECT_TAB_ADDRESS)
-  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D2 AXI-RAM or in Internal FLASH */
-#endif /* USER_VECT_TAB_ADDRESS */
-
-#else
-  if(READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) == 0U)
-  {
-    /* Enable the FMC interface clock */
-    SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
-
-    /*
-     * Disable the FMC bank1 (enabled after reset).
-     * This, prevents CPU speculation access on this bank which blocks the use of FMC during
-     * 24us. During this time the others FMC master (such as LTDC) cannot use it!
-     */
-    FMC_Bank1_R->BTCR[0] = 0x000030D2;
-
-    /* Disable the FMC interface clock */
-    CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
-  }
-
-  /* Configure the Vector Table location -------------------------------------*/
-#if defined(USER_VECT_TAB_ADDRESS)
-  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D1 AXI-RAM or in Internal FLASH */
-#endif /* USER_VECT_TAB_ADDRESS */
-
-#endif /*DUAL_CORE && CORE_CM4*/
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock , it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *
-  * @note   Each time the core clock changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.
-  *
-  * @note   - The system frequency computed by this function is not the real
-  *           frequency in the chip. It is calculated based on the predefined
-  *           constant and the selected clock source:
-  *
-  *           - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*)
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*),
-  *             HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
-  *
-  *         (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
-  *             4 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.
-  *         (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
-  *             64 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.
-  *
-  *         (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value
-  *              25 MHz), user has to ensure that HSE_VALUE is same as the real
-  *              frequency of the crystal used. Otherwise, this function may
-  *              have wrong result.
-  *
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp;
-  uint32_t common_system_clock;
-  float_t fracn1, pllvco;
-
-
-  /* Get SYSCLK source -------------------------------------------------------*/
-
-  switch (RCC->CFGR & RCC_CFGR_SWS)
-  {
-  case RCC_CFGR_SWS_HSI:  /* HSI used as system clock source */
-    common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
-    break;
-
-  case RCC_CFGR_SWS_CSI:  /* CSI used as system clock  source */
-    common_system_clock = CSI_VALUE;
-    break;
-
-  case RCC_CFGR_SWS_HSE:  /* HSE used as system clock  source */
-    common_system_clock = HSE_VALUE;
-    break;
-
-  case RCC_CFGR_SWS_PLL1:  /* PLL1 used as system clock  source */
-
-    /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN
-    SYSCLK = PLL_VCO / PLLR
-    */
-    pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC);
-    pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4)  ;
-    pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos);
-    fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3));
-
-    if (pllm != 0U)
-    {
-      switch (pllsource)
-      {
-        case RCC_PLLCKSELR_PLLSRC_HSI:  /* HSI used as PLL clock source */
-
-        hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
-        pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
-
-        break;
-
-        case RCC_PLLCKSELR_PLLSRC_CSI:  /* CSI used as PLL clock source */
-          pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
-        break;
-
-        case RCC_PLLCKSELR_PLLSRC_HSE:  /* HSE used as PLL clock source */
-          pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
-        break;
-
-      default:
-          hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
-          pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
-        break;
-      }
-      pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ;
-      common_system_clock =  (uint32_t)(float_t)(pllvco/(float_t)pllp);
-    }
-    else
-    {
-      common_system_clock = 0U;
-    }
-    break;
-
-  default:
-    common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
-    break;
-  }
-
-  /* Compute SystemClock frequency --------------------------------------------------*/
-#if defined (RCC_D1CFGR_D1CPRE)
-  tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos];
-
-  /* common_system_clock frequency : CM7 CPU frequency  */
-  common_system_clock >>= tmp;
-
-  /* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency  */
-  SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU));
-
-#else
-  tmp = D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos];
-
-  /* common_system_clock frequency : CM7 CPU frequency  */
-  common_system_clock >>= tmp;
-
-  /* SystemD2Clock frequency : AXI and AHBs Clock frequency  */
-  SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU));
-
-#endif
-
-#if defined(DUAL_CORE) && defined(CORE_CM4)
-  SystemCoreClock = SystemD2Clock;
-#else
-  SystemCoreClock = common_system_clock;
-#endif /* DUAL_CORE && CORE_CM4 */
-}
-
-/**
-  * @brief  Exit Run* mode and Configure the system Power Supply
-  *
-  * @note   This function exits the Run* mode and configures the system power supply
-  *         according to the definition to be used at compilation preprocessing level.
-  *         The application shall set one of the following configuration option:
-  *           - PWR_LDO_SUPPLY
-  *           - PWR_DIRECT_SMPS_SUPPLY
-  *           - PWR_EXTERNAL_SOURCE_SUPPLY
-  *           - PWR_SMPS_1V8_SUPPLIES_LDO
-  *           - PWR_SMPS_2V5_SUPPLIES_LDO
-  *           - PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO
-  *           - PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO
-  *           - PWR_SMPS_1V8_SUPPLIES_EXT
-  *           - PWR_SMPS_2V5_SUPPLIES_EXT
-  *
-  * @note   The function modifies the PWR->CR3 register to enable or disable specific
-  *         power supply modes and waits until the voltage level flag is set, indicating
-  *         that the power supply configuration is stable.
-  *
-  * @param  None
-  * @retval None
-  */
-void ExitRun0Mode(void)
-{
-#if defined(USE_PWR_LDO_SUPPLY)
-  #if defined(SMPS)
-    /* Exit Run* mode by disabling SMPS and enabling LDO */
-    PWR->CR3 = (PWR->CR3 & ~PWR_CR3_SMPSEN) | PWR_CR3_LDOEN;
-  #else
-    /* Enable LDO mode */
-    PWR->CR3 |= PWR_CR3_LDOEN;
-  #endif /* SMPS */
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_EXTERNAL_SOURCE_SUPPLY)
-  #if defined(SMPS)
-    /* Exit Run* mode */
-    PWR->CR3 = (PWR->CR3 & ~(PWR_CR3_SMPSEN | PWR_CR3_LDOEN)) | PWR_CR3_BYPASS;
-  #else
-    PWR->CR3 = (PWR->CR3 & ~(PWR_CR3_LDOEN)) | PWR_CR3_BYPASS;
-  #endif /* SMPS */
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_DIRECT_SMPS_SUPPLY) && defined(SMPS)
-  /* Exit Run* mode */
-  PWR->CR3 &= ~(PWR_CR3_LDOEN);
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_SMPS_1V8_SUPPLIES_LDO) && defined(SMPS)
-  /* Exit Run* mode */
-  PWR->CR3 |= PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN;
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_SMPS_2V5_SUPPLIES_LDO) && defined(SMPS)
-  /* Exit Run* mode */
-  PWR->CR3 |= PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN;
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) && defined(SMPS)
-  /* Exit Run* mode */
-  PWR->CR3 |= PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN;
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) && defined(SMPS)
-  /* Exit Run* mode */
-  PWR->CR3 |= PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN;
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_SMPS_1V8_SUPPLIES_EXT) && defined(SMPS)
-  /* Exit Run* mode */
-  PWR->CR3 = (PWR->CR3 & ~(PWR_CR3_LDOEN)) | PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS;
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#elif defined(USE_PWR_SMPS_2V5_SUPPLIES_EXT) && defined(SMPS)
-  /* Exit Run* mode */
-  PWR->CR3 = (PWR->CR3 & ~(PWR_CR3_LDOEN)) | PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS;
-  /* Wait till voltage level flag is set */
-  while ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == 0U)
-  {}
-#else
-  /* No system power supply configuration is selected at exit Run* mode */
-#endif /* USE_PWR_LDO_SUPPLY */
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */

tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h

@@ -1,302 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32h7xx.h
-  * @author  MCD Application Team
-  * @brief   CMSIS STM32H7xx Device Peripheral Access Layer Header File.
-  *
-  *          The file is the unique include file that the application programmer
-  *          is using in the C source code, usually in main.c. This file contains:
-  *           - Configuration section that allows to select:
-  *              - The STM32H7xx device used in the target application
-  *              - To use or not the peripheral's drivers in application code(i.e.
-  *                code will be based on direct access to peripheral's registers
-  *                rather than drivers API), this option is controlled by
-  *                "#define USE_HAL_DRIVER"
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32h7xx
-  * @{
-  */
-
-#ifndef STM32H7xx_H
-#define STM32H7xx_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-
-/** @addtogroup Library_configuration_section
-  * @{
-  */
-
-/**
-  * @brief STM32 Family
-  */
-#if !defined  (STM32H7)
-#define STM32H7
-#endif /* STM32H7 */
-
-
-/* Uncomment the line below according to the target STM32H7 device used in your
-   application
-  */
-
-#if !defined (STM32H743xx) && !defined (STM32H753xx)  && !defined (STM32H750xx) && !defined (STM32H742xx) && \
-    !defined (STM32H745xx) && !defined (STM32H745xG)  && !defined (STM32H755xx)  && !defined (STM32H747xx) && !defined (STM32H747xG)&& !defined (STM32H757xx) && \
-    !defined (STM32H7A3xx) && !defined (STM32H7A3xxQ) && !defined (STM32H7B3xx) && !defined (STM32H7B3xxQ) && !defined (STM32H7B0xx)  && !defined (STM32H7B0xxQ) && \
-    !defined (STM32H735xx) && !defined (STM32H733xx)  && !defined (STM32H730xx) && !defined (STM32H730xxQ)  && !defined (STM32H725xx) && !defined (STM32H723xx)
-  /* #define STM32H742xx */   /*!< STM32H742VI, STM32H742ZI, STM32H742AI, STM32H742II, STM32H742BI, STM32H742XI Devices */
-  /* #define STM32H743xx */   /*!< STM32H743VI, STM32H743ZI, STM32H743AI, STM32H743II, STM32H743BI, STM32H743XI Devices */
-  /* #define STM32H753xx */   /*!< STM32H753VI, STM32H753ZI, STM32H753AI, STM32H753II, STM32H753BI, STM32H753XI Devices */
-  /* #define STM32H750xx */   /*!< STM32H750V, STM32H750I, STM32H750X Devices */
-  /* #define STM32H747xx */   /*!< STM32H747ZI, STM32H747AI, STM32H747II, STM32H747BI, STM32H747XI Devices */
-  /* #define STM32H747xG */   /*!< STM32H747AG, STM32H747IG, STM32H747BG, STM32H747XG */
-  /* #define STM32H757xx */   /*!< STM32H757ZI, STM32H757AI, STM32H757II, STM32H757BI, STM32H757XI Devices */
-  /* #define STM32H745xx */   /*!< STM32H745ZI, STM32H745II, STM32H745BI, STM32H745XI Devices  */
-  /* #define STM32H745xG */   /*!< STM32H745ZG, STM32H745IG, STM32H745BG, STM32H745XG Devices  */
-  /* #define STM32H755xx */   /*!< STM32H755ZI, STM32H755II, STM32H755BI, STM32H755XI Devices  */
-  /* #define STM32H7B0xx */   /*!< STM32H7B0IBTx, STM32H7B0RBTx, STM32H7B0VBTx, STM32H7B0ZBTx Devices */
-  /* #define STM32H7B0xxQ */  /*!< STM32H7B0ABIxQ, STM32H7B0IBKxQ Devices */
-  /* #define STM32H7A3xx */   /*!< STM32H7A3IIK6, STM32H7A3IIT6, STM32H7A3NIH6, STM32H7A3RIT6, STM32H7A3VIH6, STM32H7A3VIT6, STM32H7A3ZIT6 */
-  /* #define STM32H7A3xxQ */  /*!< STM32H7A3QIY6Q, STM32H7A3IIK6Q, STM32H7A3IIT6Q, STM32H7A3LIH6Q, STM32H7A3VIH6Q, STM32H7A3VIT6Q, STM32H7A3AII6Q, STM32H7A3ZIT6Q */
-  /* #define STM32H7B3xx */   /*!< STM32H7B3IIK6, STM32H7B3IIT6, STM32H7B3NIH6, STM32H7B3RIT6, STM32H7B3VIH6, STM32H7B3VIT6, STM32H7B3ZIT6 */
-  /* #define STM32H7B3xxQ */  /*!< STM32H7B3QIY6Q, STM32H7B3IIK6Q, STM32H7B3IIT6Q, STM32H7B3LIH6Q, STM32H7B3VIH6Q, STM32H7B3VIT6Q, STM32H7B3AII6Q, STM32H7B3ZIT6Q */
-  /* #define STM32H735xx */   /*!< STM32H735AGI6, STM32H735IGK6, STM32H735RGV6, STM32H735VGT6, STM32H735VGY6, STM32H735ZGT6 Devices */
-  /* #define STM32H733xx */   /*!< STM32H733VGH6, STM32H733VGT6, STM32H733ZGI6, STM32H733ZGT6, Devices */
-  /* #define STM32H730xx */   /*!< STM32H730VBH6, STM32H730VBT6, STM32H730ZBT6, STM32H730ZBI6 Devices */
-  /* #define STM32H730xxQ */  /*!< STM32H730IBT6Q, STM32H730ABI6Q, STM32H730IBK6Q Devices */
-  /* #define STM32H725xx */   /*!< STM32H725AGI6, STM32H725IGK6, STM32H725IGT6, STM32H725RGV6, STM32H725VGT6, STM32H725VGY6, STM32H725ZGT6, STM32H725REV6, SM32H725VET6, STM32H725ZET6, STM32H725AEI6, STM32H725IET6, STM32H725IEK6  Devices */
-  /* #define STM32H723xx */   /*!< STM32H723VGH6, STM32H723VGT6, STM32H723ZGI6, STM32H723ZGT6, STM32H723VET6, STM32H723VEH6, STM32H723ZET6, STM32H723ZEI6 Devices */
-#endif
-
-/*  Tip: To avoid modifying this file each time you need to switch between these
-        devices, you can define the device in your toolchain compiler preprocessor.
-  */
-
-#if !defined  (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
-   In this case, these drivers will not be included and the application code will
-   be based on direct access to peripherals registers
-   */
-  /*#define USE_HAL_DRIVER */
-#endif /* USE_HAL_DRIVER */
-
-/**
-  * @brief CMSIS Device version number V1.10.7
-  */
-#define __STM32H7xx_CMSIS_DEVICE_VERSION_MAIN   (0x01) /*!< [31:24] main version */
-#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB1   (0x0A) /*!< [23:16] sub1 version */
-#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB2   (0x07) /*!< [15:8]  sub2 version */
-#define __STM32H7xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
-#define __STM32H7xx_CMSIS_DEVICE_VERSION        ((__STM32H7xx_CMSIS_DEVICE_VERSION_MAIN     << 24)\
-                                      |(__STM32H7xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
-                                      |(__STM32H7xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
-                                      |(__STM32H7xx_CMSIS_DEVICE_VERSION_RC))
-
-/**
-  * @}
-  */
-
-/** @addtogroup Device_Included
-  * @{
-  */
-
-#if defined(STM32H743xx)
-  #include "stm32h743xx.h"
-#elif defined(STM32H753xx)
-  #include "stm32h753xx.h"
-#elif defined(STM32H750xx)
-  #include "stm32h750xx.h"
-#elif defined(STM32H742xx)
-  #include "stm32h742xx.h"
-#elif defined(STM32H745xx)
-  #include "stm32h745xx.h"
-#elif defined(STM32H745xG)
-  #include "stm32h745xg.h"
-#elif defined(STM32H755xx)
-  #include "stm32h755xx.h"
-#elif defined(STM32H747xx)
-  #include "stm32h747xx.h"
-#elif defined(STM32H747xG)
-  #include "stm32h747xg.h"
-#elif defined(STM32H757xx)
-  #include "stm32h757xx.h"
-#elif defined(STM32H7B0xx)
-  #include "stm32h7b0xx.h"
-#elif defined(STM32H7B0xxQ)
-  #include "stm32h7b0xxq.h"
-#elif defined(STM32H7A3xx)
-  #include "stm32h7a3xx.h"
-#elif defined(STM32H7B3xx)
-  #include "stm32h7b3xx.h"
-#elif defined(STM32H7A3xxQ)
-  #include "stm32h7a3xxq.h"
-#elif defined(STM32H7B3xxQ)
-  #include "stm32h7b3xxq.h"
-#elif defined(STM32H735xx)
-  #include "stm32h735xx.h"
-#elif defined(STM32H733xx)
-  #include "stm32h733xx.h"
-#elif defined(STM32H730xx)
-  #include "stm32h730xx.h"
-#elif defined(STM32H730xxQ)
-  #include "stm32h730xxq.h"
-#elif defined(STM32H725xx)
-  #include "stm32h725xx.h"
-#elif defined(STM32H723xx)
-  #include "stm32h723xx.h"
-#else
- #error "Please select first the target STM32H7xx device used in your application (in stm32h7xx.h file)"
-#endif
-
-#if defined(DUAL_CORE) && !defined(CORE_CM4) && !defined(CORE_CM7)
-#error "Dual core device, please select CORE_CM4 or CORE_CM7"
-#endif
-
-/**
-  * @}
-  */
-
-/** @addtogroup Exported_types
-  * @{
-  */
-typedef enum
-{
-  RESET = 0,
-  SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum
-{
-  DISABLE = 0,
-  ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum
-{
-  SUCCESS = 0,
-  ERROR = !SUCCESS
-} ErrorStatus;
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup Exported_macros
-  * @{
-  */
-#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT)    ((REG) & (BIT))
-
-#define CLEAR_REG(REG)        ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
-
-#define READ_REG(REG)         ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
-
-/* Use of CMSIS compiler intrinsics for register exclusive access */
-/* Atomic 32-bit register access macro to set one or several bits */
-#define ATOMIC_SET_BIT(REG, BIT)                             \
-  do {                                                       \
-    uint32_t val;                                            \
-    do {                                                     \
-      val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT);       \
-    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 32-bit register access macro to clear one or several bits */
-#define ATOMIC_CLEAR_BIT(REG, BIT)                           \
-  do {                                                       \
-    uint32_t val;                                            \
-    do {                                                     \
-      val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT);      \
-    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 32-bit register access macro to clear and set one or several bits */
-#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)                          \
-  do {                                                                     \
-    uint32_t val;                                                          \
-    do {                                                                   \
-      val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
-    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U);               \
-  } while(0)
-
-/* Atomic 16-bit register access macro to set one or several bits */
-#define ATOMIC_SETH_BIT(REG, BIT)                            \
-  do {                                                       \
-    uint16_t val;                                            \
-    do {                                                     \
-      val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT);       \
-    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 16-bit register access macro to clear one or several bits */
-#define ATOMIC_CLEARH_BIT(REG, BIT)                          \
-  do {                                                       \
-    uint16_t val;                                            \
-    do {                                                     \
-      val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT);      \
-    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 16-bit register access macro to clear and set one or several bits */
-#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)                         \
-  do {                                                                     \
-    uint16_t val;                                                          \
-    do {                                                                   \
-      val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
-    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U);               \
-  } while(0)
-
-/**
-  * @}
-  */
-
-#if defined (USE_HAL_DRIVER)
- #include "stm32h7xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* STM32H7xx_H */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-
-
-