mongoose/tutorials/nxp/frdm-rw612-xpresso-freertos-lwip/doc/wifi_examples_readme.md

Hardware requirements

• Micro USB cable
• FRDM-RW612 board
• Personal Computer

Board settings

No special settings are required.

Prepare the Demo

1. Connect a micro USB cable between the PC host and the MCU-Link USB port (J10) on the board.
2. Open a serial terminal with the following settings:
   • 115200 baud rate
   • 8 data bits
   • No parity
   • One stop bit
   • No flow control
3. Download the program to the target board.
4. Launch the debugger in your IDE to begin running the example.