updated busybox 1.37.0 for orangepi zero 2w

Makefile

@@ -10,12 +10,12 @@ download:
 	./scripts/build_image.sh download
 
 clean:
-	./scripts/clean.sh
+	@./scripts/clean.sh
 
 distclean:
-	./scripts/clean.sh
-	if [ -d downloads ]; then \
-		rm -rv downloads; \
+	@./scripts/clean.sh
+	@if [ -d downloads ]; then \
+		rm -r downloads; \
 	fi
 
 dropbear:
@@ -42,11 +42,21 @@ ko8821au:
 sdroot_usable:
 	./scripts/build_image.sh sdroot_usable
 
-orangepi_pc_defconfig:
-	cp -v configs/orangepi_pc_defconfig scripts/config.sh
+%_defconfig:
+	@cp -v configs/$@ scripts/config.sh
 
-orangepi_zero_2w_defconfig:
-	cp -v configs/orangepi_zero_2w_defconfig scripts/config.sh
-
-x86_64_uclibc_defconfig:
-	cp -v configs/x86_64_uclibc_defconfig scripts/config.sh
+list-defconfigs:
+	@first=true; \
+	for defconfig in configs/*_defconfig; do \
+		[ -f "$${defconfig}" ] || continue; \
+		if $${first}; then \
+			if [ "$(2)" ]; then \
+				printf 'External configs in "$(call qstrip,$(2))":\n'; \
+			else \
+				printf "Built-in configs:\n"; \
+			fi; \
+			first=false; \
+		fi; \
+		defconfig="$${defconfig##*/}"; \
+		printf " %-35s - Build for %s\n" "$${defconfig}" "$${defconfig%_defconfig}"; \
+	done

board/orangepi_pc/linux-6.13.3.config

@@ -11,15 +11,15 @@ CONFIG_AS_VERSION=24100
 CONFIG_LD_IS_BFD=y
 CONFIG_LD_VERSION=24100
 CONFIG_LLD_VERSION=0
-CONFIG_RUSTC_VERSION=108200
-CONFIG_RUSTC_LLVM_VERSION=190101
+CONFIG_RUSTC_VERSION=109300
+CONFIG_RUSTC_LLVM_VERSION=210108
 CONFIG_CC_CAN_LINK=y
 CONFIG_CC_CAN_LINK_STATIC=y
 CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
 CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
 CONFIG_CC_HAS_ASM_INLINE=y
 CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
-CONFIG_PAHOLE_VERSION=129
+CONFIG_PAHOLE_VERSION=131
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
 CONFIG_THREAD_INFO_IN_TASK=y
@@ -150,19 +150,29 @@ CONFIG_GCC10_NO_ARRAY_BOUNDS=y
 CONFIG_CC_NO_ARRAY_BOUNDS=y
 CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
 CONFIG_CC_NO_STRINGOP_OVERFLOW=y
+CONFIG_SLAB_OBJ_EXT=y
 CONFIG_CGROUPS=y
+CONFIG_PAGE_COUNTER=y
 # CONFIG_CGROUP_FAVOR_DYNMODS is not set
-# CONFIG_MEMCG is not set
-# CONFIG_BLK_CGROUP is not set
-# CONFIG_CGROUP_SCHED is not set
+CONFIG_MEMCG=y
+# CONFIG_MEMCG_V1 is not set
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_GROUP_SCHED_WEIGHT=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_SCHED_MM_CID=y
-# CONFIG_CGROUP_PIDS is not set
-# CONFIG_CGROUP_RDMA is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CPUSETS is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_CGROUP_PERF is not set
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+# CONFIG_CPUSETS_V1 is not set
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
 # CONFIG_CGROUP_MISC is not set
 CONFIG_SOCK_CGROUP_DATA=y
 CONFIG_NAMESPACES=y
@@ -675,7 +685,11 @@ CONFIG_BLK_DEV_BSG_COMMON=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLK_DEV_WRITE_MOUNTED=y
 # CONFIG_BLK_DEV_ZONED is not set
+# CONFIG_BLK_DEV_THROTTLING is not set
 # CONFIG_BLK_WBT is not set
+# CONFIG_BLK_CGROUP_IOLATENCY is not set
+# CONFIG_BLK_CGROUP_IOCOST is not set
+# CONFIG_BLK_CGROUP_IOPRIO is not set
 CONFIG_BLK_DEBUG_FS=y
 # CONFIG_BLK_SED_OPAL is not set
 # CONFIG_BLK_INLINE_ENCRYPTION is not set
@@ -5896,6 +5910,7 @@ CONFIG_SBITMAP=y
 # end of Library routines
 
 CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_UNION_FIND=y
 
 #
 # Kernel hacking

board/orangepi_pc/rootfs_overlay/etc/default/dropbear

@@ -0,0 +1,3 @@
+DROPBEAR_PORT=22
+DROPBEAR_EXTRA_ARGS="-E -R -B -m -F"
+ENABLE_ROOT_LOGIN="yes"

board/orangepi_pc/rootfs_overlay/etc/finit.d/available/dropbear.conf

@@ -0,0 +1 @@
+service [2345] env:/etc/default/dropbear dropbear $DROPBEAR_EXTRA_ARGS -p$DROPBEAR_PORT -- Dropbear SSH daemon

board/orangepi_pc/rootfs_overlay/etc/finit.d/available/getty@.conf

@@ -0,0 +1,2 @@
+# Consoles to start getty on when system is up
+tty :%i [12345] /dev/%i noclear nowait

board/orangepi_pc/rootfs_overlay/etc/finit.d/available/inetd.conf

@@ -0,0 +1 @@
+service [2345] inetd -f -- Internet super server

board/orangepi_pc/rootfs_overlay/etc/finit.d/available/syslogd.conf

@@ -0,0 +1,16 @@
+# cat syslogd.conf 
+# BusyBox syslogd + klogd
+# Use <pid/syslogd> as barrier for other system tasks and service that
+# rely on modules, firmware, and device nodes to be ready.
+
+# We want syslogd to always run, never be stopped, regardless of runlevel
+# so it can send to any remote syslog server the user has set up.
+service if:udevd nowarn env:-/etc/default/syslogd <!run/udevadm:5/success> \
+	[S0123456789] syslogd -n $SYSLOGD_ARGS -- System log daemon
+service if:mdev  nowarn env:-/etc/default/syslogd <!run/coldplug/success> \
+	[S0123456789] syslogd -n $SYSLOGD_ARGS -- System log daemon
+service if:mdevd nowarn env:-/etc/default/syslogd <!run/coldplug/success> \
+	[S0123456789] syslogd -n $SYSLOGD_ARGS -- System log daemon
+
+# klogd depends on syslogd, but BusyBox syslogd doesn't create a PID file to sync with
+service [S0123456789] <!pid/syslogd> klogd -n -- Kernel log daemon

board/orangepi_pc/rootfs_overlay/etc/finit.d/available/telnetd.conf

@@ -0,0 +1,5 @@
+# cat telnetd.conf 
+# Note: telnetd also runs from inetd, see /etc/inetd.conf
+#service [2345] <!> :23   telnetd -F -p 23   -- Telnet daemon on port 23
+#service [2345] <!> :2323 telnetd -F -p 2323 -- Telnet daemon on port 2323
+service [2345] <!> telnetd -F -- Telnet daemon

board/orangepi_pc/rootfs_overlay/etc/finit.d/enabled/dropbear.conf

@@ -0,0 +1 @@
+../available/dropbear.conf

board/orangepi_pc/rootfs_overlay/etc/finit.d/enabled/getty@tty1.conf

@@ -0,0 +1 @@
+../available/getty@.conf

board/orangepi_pc/rootfs_overlay/etc/finit.d/enabled/getty@ttyS0.conf

@@ -0,0 +1 @@
+../available/getty@.conf

board/orangepi_pc/rootfs_overlay/etc/finit.d/enabled/inetd.conf

@@ -0,0 +1 @@
+../available/inetd.conf

board/orangepi_pc/rootfs_overlay/etc/finit.d/enabled/syslogd.conf

@@ -0,0 +1 @@
+../available/syslogd.conf

board/orangepi_pc/rootfs_overlay/etc/finit.d/enabled/telnetd.conf

@@ -0,0 +1 @@
+../available/telnetd.conf

board/orangepi_pc/rootfs_overlay/etc/fstab

@@ -0,0 +1 @@
+/dev/mmcblk0p1 / ext4 rw,relatime 0 1

board/orangepi_pc/rootfs_overlay/etc/group

@@ -0,0 +1,17 @@
+root:x:0:root
+tty:x:5:
+disk:x:6:root
+kmem:x:9:
+floppy:x:11:root
+audio:x:18:
+cdrom:x:19:
+dialout:x:20:root
+input:x:23:
+tape:x:26:root
+video:x:27:root
+netdev:x:28:
+dnsmasq:x:963:dnsmasq
+sshd:x:33:sshd
+kvm:x:34:kvm
+nobody:x:65534:
+gitea:x:1000:

board/orangepi_pc/rootfs_overlay/etc/hostname

@@ -0,0 +1 @@
+orangepi_pc

board/orangepi_pc/rootfs_overlay/etc/inetd.conf

@@ -0,0 +1 @@
+21 stream tcp nowait root /sbin/ftpd /sbin/ftpd -S -A -w /srv/ftp

board/orangepi_pc/rootfs_overlay/etc/motd

@@ -0,0 +1,3 @@
+Welcome to Simple Linux!
+
+You may change this message by editing /etc/motd.

board/orangepi_pc/rootfs_overlay/etc/network/interfaces

@@ -0,0 +1,5 @@
+auto lo
+iface lo inet loopback
+
+auto eth0
+iface eth0 inet dhcp

board/orangepi_pc/rootfs_overlay/etc/passwd

@@ -0,0 +1,5 @@
+root:x:0:0:root:/root:/bin/sh
+dnsmasq:x:963:963:dnsmasq daemon:/:/usr/bin/nologin
+sshd:x:33:33:SSH daemon:/var/lib/sshd:/bin/sh
+nobody:x:65534:65534:Kernel Oerflow User:/:/usr/bin/nologin
+gitea:x:1000:1000:Gitea daemon user:/home/gitea:/bin/sh

board/orangepi_pc/rootfs_overlay/etc/profile

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+#--- import colors ---
+. /usr/lib/init/colors.sh
+#---------------------
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/.local/bin
+
+export PS1="$BGREEN** \u@\h: \$(date +%d.%m.%Y) \t\n\w \\\$ $RESET"
+[ $(id -u) -eq 0 ] && export PS1="$BRED** \u@\h: \$(date +%d.%m.%Y) \t\n\w \\\$ $RESET"
+
+#--- sys ---
+alias psa='busybox ps'          # show all processes
+alias c='clear'                 # clear terminal screen
+alias e='echo'                  # print in terminal
+alias s='source'                # source
+alias una='uname -a'            # system name
+alias ifcnf='ifconfig'          # ifconfig
+alias ipr='ip route'            # show routes
+alias ipa='ip addr'             # show addresses
+alias ipl='ip link'             # show links
+alias ll='ls -lh'               # show list files with information
+alias la='ls -a'
+alias l='ls -alh'
+alias df='df -h'
+alias free='free -h'
+#-----------

board/orangepi_pc/rootfs_overlay/etc/shadow

@@ -0,0 +1,4 @@
+root:F.fHA5x2Q.xNY:19797::::::
+dnsmasq:!*:19889::::::
+sshd:!:19906:0:99999:7:::
+nobody:!*:19889::::::

board/orangepi_pc/rootfs_overlay/etc/shells

@@ -0,0 +1,2 @@
+/bin/sh
+/bin/ash

board/orangepi_pc/rootfs_overlay/usr/lib/init/colors.sh

@@ -0,0 +1,82 @@
+#!/bin/sh
+
+#--- reset colors ---
+RESET="\033[0m"
+#--------------------
+
+#--------- regularcolrs ---------
+GREEN="\033[0;32m"       #GREEN
+BLUE="\033[0;34m"        #BLUE
+YELLOW="\033[1;33m"      #YELLOW
+RED="\033[0;31m"         #RED
+BLACK="\033[0;30m"       #BLACK
+PURPLE="\033[0;35m"      #PURPLE
+CYAN="\033[0;36m"        #CYAN
+WHITE="\033[0;37m"       #WHITE
+#--------------------------------
+
+#-------- bold ------------------
+BBLACK="\033[1;30m"      #BLACK
+BRED="\033[1;31m"        #RED
+BGREEN="\033[1;32m"      #GREEN
+BYELLOW="\033[1;33m"     #YELLOW
+BBLUE="\033[1;34m"       #BLUE
+BPURPLE="\033[1;35m"     #PURPLE
+BCYAN="\033[1;36m"       #CYAN
+BWHITE="\033[1;37m"      #WHITE
+#--------------------------------
+
+#-------- Underline -------------
+UBLACK="\033[4;30m"      #BLACK
+URED="\033[4;31m"        #RED
+UGREEN="\033[4;32m"      #GREEN
+UYELLOW="\033[4;33m"     #YELLOW
+UBLUE="\033[4;34m"       #BLUE
+UPURPLE="\033[4;35m"     #PURPLE
+UCYAN="\033[4;36m"       #CYAN
+UWHITE="\033[4;37m"      #WHITE
+#--------------------------------
+
+#--------- Background -----------
+ON_BLACK="\033[40m"      #BLACK
+ON_RED="\033[41m"        #RED
+ON_GREEN="\033[42m"      #GREEN
+ON_YELLOW="\033[43m"     #YELLOW
+ON_BLUE="\033[44m"       #BLUE
+ON_PURPLE="\033[45m"     #PURPLE
+ON_CYAN="\033[46m"       #CYAN
+ON_WHITE="\033[47m"      #WHITE
+#--------------------------------
+
+#------ HighIntensity -----------
+IBLACK="\033[0;90m"      #BLACK
+IRED="\033[0;91m"        #RED
+IGREEN="\033[0;92m"      #GREEN
+IYELLOW="\033[0;93m"     #YELLOW
+IBLUE="\033[0;94m"       #BLUE
+IPURPLE="\033[0;95m"     #PURPLE
+ICYAN="\033[0;96m"       #CYAN
+IWHITE="\033[0;97m"      #WHITE
+#--------------------------------
+
+#------ BoldHighIntensity -------
+BIBLACK="\033[1;90m"     #BLACK
+BIRED="\033[1;91m"       #RED
+BIGREEN="\033[1;92m"     #GREEN
+BIYELLOW="\033[1;93m"    #YELLOW
+BIBLUE="\033[1;94m"      #BLUE
+BIPURPLE="\033[1;95m"    #PURPLE
+BICYAN="\033[1;96m"      #CYAN
+BIWHITE="\033[1;97m"     #WHITE
+#--------------------------------
+
+#--- HighIntensitybackgrounds ---
+ON_IBLACK="\033[0;100m"  #BLACK
+ON_IRED="\033[0;101m"    #RED
+ON_IGREEN="\033[0;102m"  #GREEN
+ON_IYELLOW="\033[0;103m" #YELLOW
+ON_IBLUE="\033[0;104m"   #BLUE
+ON_IPURPLE="\033[0;105m" #PURPLE
+ON_ICYAN="\033[0;106m"   #CYAN
+ON_IWHITE="\033[0;107m"  #WHITE
+#--------------------------------

board/orangepi_pc/rootfs_overlay/usr/share/udhcpc/default.script

@@ -0,0 +1,65 @@
+#!/bin/sh
+
+[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
+RESOLV_CONF="/etc/resolv.conf"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+# return 0 if root is mounted on a network filesystem
+root_is_nfs() {
+	grep -qe '^/dev/root.*\(nfs\|smbfs\|ncp\|coda\) .*' /proc/mounts
+}
+
+have_bin_ip=0
+if [ -x /usr/bin/ip ]; then
+  have_bin_ip=1
+fi
+
+case "$1" in
+	deconfig)
+		if ! root_is_nfs ; then
+            if [ $have_bin_ip -eq 1 ]; then
+                ip addr flush dev $interface
+                ip link set dev $interface up
+            else
+                /usr/bin/ifconfig $interface 0.0.0.0
+            fi
+		fi
+		;;
+	renew|bound)
+        if [ $have_bin_ip -eq 1 ]; then
+            ip addr add dev $interface local $ip/$mask $BROADCAST
+        else
+            /usr/bin/ifconfig $interface $ip $BROADCAST $NETMASK
+        fi
+
+		if [ -n "$router" ] ; then
+			if ! root_is_nfs ; then
+                if [ $have_bin_ip -eq 1 ]; then
+                    while ip route del default 2>/dev/null ; do
+                        :
+                    done
+                else
+                    while route del default gw 0.0.0.0 dev $interface 2>/dev/null ; do
+                        :
+                    done
+                fi
+			fi
+			metric=0
+			for i in $router ; do
+                if [ $have_bin_ip -eq 1 ]; then
+                    ip route add default via $i metric $((metric++))
+                else
+                    route add default gw $i dev $interface metric $((metric++)) 2>/dev/null
+                fi
+			done
+		fi
+		echo -n > $RESOLV_CONF
+		[ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
+		for i in $dns ; do
+			echo adding dns $i
+			echo nameserver $i >> $RESOLV_CONF
+		done
+		;;
+esac
+exit 0

board/orangepi_pc/uclibc-1.0.56-byteswap-common.h.patch

@@ -0,0 +1,15 @@
+--- a/usr/include/bits/byteswap-common.h	2026-02-26 13:00:22.122847479 +0700
++++ b/usr/include/bits/byteswap-common.h	2026-02-26 13:13:45.742263491 +0700
+@@ -102,11 +102,7 @@
+       | (((x) & 0x000000000000ff00ull) << 40)				     \
+       | (((x) & 0x00000000000000ffull) << 56))
+ 
+-static __inline __uint64_t
+-__bswap_64 (__uint64_t __bsx)
+-{
+-  return __bswap_constant_64 (__bsx);
+-}
++#define __bswap_64 (__uint64_t __bsx) return __bswap_constant_64 (__bsx)
+ #endif
+ 
+ #endif /* _BITS_BYTESWAP_H */

board/orangepi_pc/uclibc-1.0.56.config

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# uClibc-ng 1.0.50 C Library Configuration
+# uClibc-ng 1.0.56 C Library Configuration
 #
 # TARGET_aarch64 is not set
 # TARGET_alpha is not set
@@ -59,6 +59,7 @@ UCLIBC_HAS_FLOATS=y
 UCLIBC_HAS_FPU=y
 DO_C99_MATH=y
 DO_XSI_MATH=y
+UCLIBC_HAS_FENV=y
 UCLIBC_HAS_LONG_DOUBLE_MATH=y
 KERNEL_HEADERS=
 HAVE_DOT_CONFIG=y

board/orangepi_pc/wpa_supplicant.config

@@ -0,0 +1,23 @@
+CONFIG_BACKEND=file
+CONFIG_CTRL_IFACE=y
+CONFIG_DEBUG_FILE=y
+CONFIG_DEBUG_SYSLOG=y
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+CONFIG_DRIVER_NL80211=y
+CONFIG_DRIVER_WEXT=y
+CONFIG_DRIVER_WIRED=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_TTLS=y
+CONFIG_IEEE8021X_EAPOL=y
+CONFIG_IPV6=y
+CONFIG_LIBNL32=y
+CONFIG_PEERKEY=y
+CONFIG_PKCS12=y
+CONFIG_SMARTCARD=y
+CONFIG_WPS=y

board/orangepi_zero_2w/busybox-initrd-list-1.37.0.config

@@ -0,0 +1,20 @@
+awk
+blkid
+cat
+fdisk
+find
+findfs
+grep
+hdparm
+ls
+mkdir
+mount
+mountpoint
+pivot_root
+printf
+sed
+sh
+sleep
+switch_root
+umount
+vi

board/orangepi_zero_2w/busybox-list-1.37.0.config

@@ -0,0 +1,398 @@
+[
+[[
+acpid
+add-shell
+addgroup
+adduser
+adjtimex
+ar
+arch
+arp
+arping
+ascii
+ash
+awk
+base32
+base64
+basename
+bbconfig
+bc
+beep
+blkdiscard
+blkid
+blockdev
+brctl
+bunzip2
+bzcat
+bzip2
+cal
+cat
+chat
+chattr
+chgrp
+chmod
+chown
+chpasswd
+chroot
+chrt
+chvt
+cksum
+clear
+cmp
+comm
+conspy
+cp
+cpio
+crc32
+crond
+crontab
+cryptpw
+cttyhack
+cut
+date
+dc
+dd
+deallocvt
+delgroup
+deluser
+depmod
+devfsd
+devmem
+df
+dhcprelay
+diff
+dirname
+dmesg
+dnsd
+dnsdomainname
+dos2unix
+dpkg
+dpkg-deb
+du
+dumpkmap
+dumpleases
+echo
+ed
+egrep
+eject
+env
+ether-wake
+expand
+expr
+factor
+fakeidentd
+fallocate
+false
+fatattr
+fbset
+fbsplash
+fdflush
+fdformat
+fdisk
+fgconsole
+fgrep
+find
+findfs
+flash_eraseall
+flash_lock
+flash_unlock
+flashcp
+flock
+fold
+free
+freeramdisk
+fsck
+fsck.minix
+fsfreeze
+fstrim
+fsync
+ftpd
+ftpget
+ftpput
+fuser
+getfattr
+getopt
+getty
+grep
+groups
+gunzip
+gzip
+hd
+hdparm
+head
+hexdump
+hexedit
+hostid
+hostname
+httpd
+hush
+hwclock
+i2cdetect
+i2cdump
+i2cget
+i2cset
+i2ctransfer
+id
+ifconfig
+ifdown
+ifenslave
+ifplugd
+ifup
+inetd
+inotifyd
+insmod
+install
+ionice
+iostat
+ip
+ipaddr
+ipcalc
+ipcrm
+ipcs
+iplink
+ipneigh
+iproute
+iprule
+iptunnel
+kbd_mode
+kill
+killall
+killall5
+klogd
+last
+less
+link
+linux32
+linux64
+ln
+loadfont
+loadkmap
+logger
+login
+logname
+logread
+losetup
+lpd
+lpq
+lpr
+ls
+lsattr
+lsmod
+lsof
+lspci
+lsscsi
+lsusb
+lzcat
+lzma
+lzop
+lzopcat
+makedevs
+makemime
+man
+md5sum
+mdev
+mesg
+microcom
+mim
+mkdir
+mkdosfs
+mke2fs
+mkfifo
+mkfs.ext2
+mkfs.minix
+mkfs.reiser
+mkfs.vfat
+mknod
+mkpasswd
+mkswap
+mktemp
+modinfo
+modprobe
+more
+mount
+mountpoint
+mpstat
+mt
+mv
+nameif
+nanddump
+nandwrite
+nbd-client
+nc
+netcat
+netstat
+nice
+nl
+nmeter
+nohup
+nologin
+nproc
+nsenter
+nslookup
+ntpd
+od
+openvt
+partprobe
+passwd
+paste
+patch
+pgrep
+pidof
+ping
+ping6
+pipe_progress
+pivot_root
+pkill
+pmap
+popmaildir
+powertop
+printenv
+printf
+ps
+pscan
+pstree
+pwd
+pwdx
+raidautorun
+rdate
+rdev
+readahead
+readlink
+readprofile
+realpath
+reformime
+remove-shell
+renice
+reset
+resize
+rev
+rfkill
+rm
+rmdir
+rmmod
+route
+rpm
+rpm2cpio
+rtcwake
+run-parts
+runlevel
+rx
+script
+scriptreplay
+sed
+seedrng
+sendmail
+seq
+setarch
+setconsole
+setfattr
+setfont
+setkeycodes
+setlogcons
+setpriv
+setserial
+setsid
+sh
+sha1sum
+sha256sum
+sha3sum
+sha512sum
+showkey
+shred
+shuf
+slattach
+sleep
+smemcap
+sort
+split
+ssl_client
+start-stop-daemon
+stat
+strings
+stty
+su
+sulogin
+sum
+swapoff
+swapon
+switch_root
+sync
+sysctl
+syslogd
+tac
+tail
+tar
+taskset
+tcpsvd
+tee
+telnet
+telnetd
+test
+tftp
+tftpd
+time
+timeout
+top
+touch
+tr
+traceroute
+traceroute6
+tree
+true
+truncate
+ts
+tsort
+tty
+ttysize
+tunctl
+tune2fs
+ubiattach
+ubidetach
+ubimkvol
+ubirename
+ubirmvol
+ubirsvol
+ubiupdatevol
+udhcpc
+udhcpc6
+udhcpd
+udpsvd
+uevent
+umount
+uname
+uncompress
+unexpand
+uniq
+unix2dos
+unlink
+unlzma
+unlzop
+unshare
+unxz
+unzip
+uptime
+users
+usleep
+uudecode
+uuencode
+vconfig
+vi
+vlock
+volname
+w
+wall
+watch
+watchdog
+wc
+wget
+which
+who
+whoami
+whois
+xargs
+xxd
+xz
+xzcat
+yes
+zcat
+zcip

board/orangepi_zero_2w/rootfs_overlay/etc/default/dropbear

@@ -0,0 +1,3 @@
+DROPBEAR_PORT=22
+DROPBEAR_EXTRA_ARGS="-E -R -B -m -F"
+ENABLE_ROOT_LOGIN="yes"

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/available/dropbear.conf

@@ -0,0 +1 @@
+service [2345] env:/etc/default/dropbear dropbear $DROPBEAR_EXTRA_ARGS -p$DROPBEAR_PORT -- Dropbear SSH daemon

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/available/getty@.conf

@@ -0,0 +1,2 @@
+# Consoles to start getty on when system is up
+tty :%i [12345] /dev/%i noclear nowait

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/available/inetd.conf

@@ -0,0 +1 @@
+service [2345] inetd -f -- Internet super server

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/available/syslogd.conf

@@ -0,0 +1,16 @@
+# cat syslogd.conf 
+# BusyBox syslogd + klogd
+# Use <pid/syslogd> as barrier for other system tasks and service that
+# rely on modules, firmware, and device nodes to be ready.
+
+# We want syslogd to always run, never be stopped, regardless of runlevel
+# so it can send to any remote syslog server the user has set up.
+service if:udevd nowarn env:-/etc/default/syslogd <!run/udevadm:5/success> \
+	[S0123456789] syslogd -n $SYSLOGD_ARGS -- System log daemon
+service if:mdev  nowarn env:-/etc/default/syslogd <!run/coldplug/success> \
+	[S0123456789] syslogd -n $SYSLOGD_ARGS -- System log daemon
+service if:mdevd nowarn env:-/etc/default/syslogd <!run/coldplug/success> \
+	[S0123456789] syslogd -n $SYSLOGD_ARGS -- System log daemon
+
+# klogd depends on syslogd, but BusyBox syslogd doesn't create a PID file to sync with
+service [S0123456789] <!pid/syslogd> klogd -n -- Kernel log daemon

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/available/telnetd.conf

@@ -0,0 +1,5 @@
+# cat telnetd.conf 
+# Note: telnetd also runs from inetd, see /etc/inetd.conf
+#service [2345] <!> :23   telnetd -F -p 23   -- Telnet daemon on port 23
+#service [2345] <!> :2323 telnetd -F -p 2323 -- Telnet daemon on port 2323
+service [2345] <!> telnetd -F -- Telnet daemon

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/available/udhcpc@.conf

@@ -0,0 +1,2 @@
+# Запуск DHCP-клиента после поднятия интерфейса wlan0
+service :%i <net/%i/up> /usr/bin/udhcpc -R -n -f -p /var/run/udhcpc.%i.pid -i %i -- DHCP Client

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/available/wpa_supplicant@.conf

@@ -0,0 +1,2 @@
+# Запуск wpa_supplicant для интерфейса wlan0 при загрузке системы
+service :%i /usr/bin/wpa_supplicant -Dnl80211 -i %i -c /etc/wpa_supplicant.conf -- WPA Supplicant

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/dropbear.conf

@@ -0,0 +1 @@
+../available/dropbear.conf

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/getty@tty1.conf

@@ -0,0 +1 @@
+../available/getty@.conf

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/getty@ttyS0.conf

@@ -0,0 +1 @@
+../available/getty@.conf

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/inetd.conf

@@ -0,0 +1 @@
+../available/inetd.conf

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/syslogd.conf

@@ -0,0 +1 @@
+../available/syslogd.conf

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/telnetd.conf

@@ -0,0 +1 @@
+../available/telnetd.conf

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/udhcpc@wlan0.conf

@@ -0,0 +1 @@
+../available/udhcpc@.conf

board/orangepi_zero_2w/rootfs_overlay/etc/finit.d/enabled/wpa_supplicant@wlan0.conf

@@ -0,0 +1 @@
+../available/wpa_supplicant@.conf

board/orangepi_zero_2w/rootfs_overlay/etc/fstab

@@ -0,0 +1 @@
+/dev/mmcblk0p1 / ext4 rw,relatime 0 1

board/orangepi_zero_2w/rootfs_overlay/etc/group

@@ -0,0 +1,17 @@
+root:x:0:root
+tty:x:5:
+disk:x:6:root
+kmem:x:9:
+floppy:x:11:root
+audio:x:18:
+cdrom:x:19:
+dialout:x:20:root
+input:x:23:
+tape:x:26:root
+video:x:27:root
+netdev:x:28:
+dnsmasq:x:963:dnsmasq
+sshd:x:33:sshd
+kvm:x:34:kvm
+nobody:x:65534:
+gitea:x:1000:

board/orangepi_zero_2w/rootfs_overlay/etc/hostname

@@ -0,0 +1 @@
+orangepi_zero_2w

board/orangepi_zero_2w/rootfs_overlay/etc/inetd.conf

@@ -0,0 +1 @@
+21 stream tcp nowait root /sbin/ftpd /sbin/ftpd -S -A -w /srv/ftp

board/orangepi_zero_2w/rootfs_overlay/etc/modules-load.d/modules.conf

@@ -0,0 +1,6 @@
+uwe5622_bsp_sdio
+sprdwl_ng
+sprdbt_tty
+g_serial
+sunxi_cedrus
+sunxi_cir

board/orangepi_zero_2w/rootfs_overlay/etc/motd

@@ -0,0 +1,3 @@
+Welcome to Simple Linux!
+
+You may change this message by editing /etc/motd.

board/orangepi_zero_2w/rootfs_overlay/etc/network/interfaces

@@ -0,0 +1,2 @@
+auto lo
+iface lo inet loopback

board/orangepi_zero_2w/rootfs_overlay/etc/passwd

@@ -0,0 +1,5 @@
+root:x:0:0:root:/root:/bin/sh
+dnsmasq:x:963:963:dnsmasq daemon:/:/usr/bin/nologin
+sshd:x:33:33:SSH daemon:/var/lib/sshd:/bin/sh
+nobody:x:65534:65534:Kernel Oerflow User:/:/usr/bin/nologin
+gitea:x:1000:1000:Gitea daemon user:/home/gitea:/bin/sh

board/orangepi_zero_2w/rootfs_overlay/etc/profile

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+#--- import colors ---
+. /usr/lib/init/colors.sh
+#---------------------
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/.local/bin
+
+export PS1="$BGREEN** \u@\h: \$(date +%d.%m.%Y) \t\n\w \\\$ $RESET"
+[ $(id -u) -eq 0 ] && export PS1="$BRED** \u@\h: \$(date +%d.%m.%Y) \t\n\w \\\$ $RESET"
+
+#--- sys ---
+alias psa='busybox ps'          # show all processes
+alias c='clear'                 # clear terminal screen
+alias e='echo'                  # print in terminal
+alias s='source'                # source
+alias una='uname -a'            # system name
+alias ifcnf='ifconfig'          # ifconfig
+alias ipr='ip route'            # show routes
+alias ipa='ip addr'             # show addresses
+alias ipl='ip link'             # show links
+alias ll='ls -lh'               # show list files with information
+alias la='ls -a'
+alias l='ls -alh'
+alias df='df -h'
+alias free='free -h'
+#-----------

board/orangepi_zero_2w/rootfs_overlay/etc/shadow

@@ -0,0 +1,4 @@
+root:F.fHA5x2Q.xNY:19797::::::
+dnsmasq:!*:19889::::::
+sshd:!:19906:0:99999:7:::
+nobody:!*:19889::::::

board/orangepi_zero_2w/rootfs_overlay/etc/shells

@@ -0,0 +1,2 @@
+/bin/sh
+/bin/ash

board/orangepi_zero_2w/rootfs_overlay/etc/wpa_supplicant.conf

@@ -0,0 +1,7 @@
+ctrl_interface=/var/run/wpa_supplicant
+update_config=1
+
+network={
+    ssid="Worlt_5G"
+    psk="Simba28082020"
+}

board/orangepi_zero_2w/rootfs_overlay/usr/lib/firmware/wifi_2355b001_1ant.ini

@@ -0,0 +1,177 @@
+[Section 1: Version]
+Major = 2
+Minor = 2
+
+[Section 2: Board Config]
+Calib_Bypass = 11758
+TxChain_Mask = 2
+RxChain_Mask = 2
+
+[Section 3: Board Config TPC]
+DPD_LUT_idx = 0x33,0x33,0x0,0x11,0x22,0x33,0x33,0x33
+TPC_Goal_Chain0 = 0,0,0,0,0,0,0,0
+TPC_Goal_Chain1 = 159,167,162,152,159,167,162,152
+
+[Section 4: TPC-LUT]
+Chain0_LUT_0 = 6,0,40,0
+Chain0_LUT_1 = 6,1,24,0
+Chain0_LUT_2 = 6,2,8,0
+Chain0_LUT_3 = 10,2,0,0
+Chain0_LUT_4 = 14,2,0,0
+Chain0_LUT_5 = 18,2,0,0
+Chain0_LUT_6 = 22,2,0,0
+Chain0_LUT_7 = 26,2,0,0
+Chain1_LUT_0 = 6,0,40,0
+Chain1_LUT_1 = 6,1,24,0
+Chain1_LUT_2 = 6,2,8,0
+Chain1_LUT_3 = 10,2,0,0
+Chain1_LUT_4 = 14,2,0,0
+Chain1_LUT_5 = 18,2,0,0
+Chain1_LUT_6 = 22,2,0,0
+Chain1_LUT_7 = 26,2,0,0
+
+[Section 5: Board Config Frequency Compensation]
+2G_Channel_Chain0 = 6,6,6,6,7,7,7,7,7,7,7,7,7,7
+2G_Channel_Chain1 = 6,6,6,6,7,7,7,7,7,7,7,7,7,7
+5G_Channel_Chain0 = 11,11,11,11,9,9,9,9,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,9,9
+5G_Channel_Chain1 = 11,11,11,11,9,9,9,9,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,9,9
+
+[Section 6: Rate To Power with BW 20M]
+11b_Power = 20,20,20,20
+11ag_Power = 28,32,36,44,28,32,36,48
+11n_Power = 34,38,38,40,40,44,44,48,32,36,36,40,40,44,44,54,48
+11ac_Power = 32,36,36,40,40,44,44,48,50,66,32,36,36,40,40,44,44,48,50,66
+
+[Section 7: Power Backoff]
+Green_WIFI_offset = 0
+HT40_Power_offset = 0
+VHT40_Power_offset = 0
+VHT80_Power_offset = 0
+SAR_Power_offset = 0
+Mean_Power_offset = 36
+
+[Section 8: Reg Domain]
+reg_domain1 = 0x00000001
+reg_domain2 = 0x00000002
+
+[Section 9: Band Edge Power offset (MKK, FCC, ETSI)]
+BW20M = 3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41
+BW40M = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21
+BW80M = 6,5,4,3,2,1
+
+[Section 10: TX Scale]
+Chain0_1 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
+Chain1_1 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
+Chain0_2 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17
+Chain1_2 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17
+Chain0_3 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,18
+Chain1_3 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,18
+Chain0_4 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,19
+Chain1_4 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,19
+Chain0_5 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,20
+Chain1_5 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,20
+Chain0_6 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,21
+Chain1_6 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,21
+Chain0_7 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,22
+Chain1_7 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,22
+Chain0_8 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,23
+Chain1_8 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,23
+Chain0_9 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,24
+Chain1_9 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,24
+Chain0_10 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,25
+Chain1_10 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,25
+Chain0_11 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,26
+Chain1_11 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,26
+Chain0_12 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,27
+Chain1_12 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,27
+Chain0_13 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,28
+Chain1_13 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,28
+Chain0_14 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,29
+Chain1_14 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,29
+Chain0_36 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,30
+Chain1_36 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,30
+Chain0_40 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,31
+Chain1_40 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,31
+Chain0_44 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,32
+Chain1_44 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,32
+Chain0_48 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,33
+Chain1_48 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,33
+Chain0_52 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,34
+Chain1_52 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,34
+Chain0_56 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,35
+Chain1_56 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,35
+Chain0_60 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,36
+Chain1_60 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,36
+Chain0_64 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,37
+Chain1_64 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,37
+Chain0_100 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,38
+Chain1_100 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,38
+Chain0_104 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,39
+Chain1_104 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,39
+Chain0_108 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,40
+Chain1_108 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,40
+Chain0_112 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,41
+Chain1_112 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,41
+Chain0_116 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,42
+Chain1_116 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,42
+Chain0_120 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,43
+Chain1_120 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,43
+Chain0_124 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,44
+Chain1_124 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,44
+Chain0_128 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,45
+Chain1_128 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,45
+Chain0_132 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,46
+Chain1_132 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,46
+Chain0_136 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,47
+Chain1_136 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,47
+Chain0_140 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,48
+Chain1_140 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,48
+Chain0_144 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,49
+Chain1_144 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,49
+Chain0_149 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,50
+Chain1_149 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,50
+Chain0_153 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,51
+Chain1_153 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,51
+Chain0_157 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,52
+Chain1_157 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,52
+Chain0_161 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,53
+Chain1_161 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,53
+Chain0_165 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,54
+Chain1_165 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,54
+
+[Section 11: misc]
+DFS_switch = 1
+power_save_switch = 2
+ex-Fem_and_ex-LNA_param_setup = 3
+rssi_report_diff = 4
+
+[Section 12: debug reg]
+address = 0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16
+value = 0x16,0x17,0x18,0x19,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x30,0x31
+
+[Section 13: coex_config]
+bt_performance_cfg0 = 0x01010101
+bt_performance_cfg1 = 0x01000000
+wifi_performance_cfg0 = 0x01050A01
+wifi_performance_cfg2 = 0x00000000
+strategy_cfg0 = 0x01010100
+strategy_cfg1 = 0x03000000
+strategy_cfg2 = 0x08020000
+compatibility_cfg0 = 0x04040000
+compatibility_cfg1 = 0x0
+ant_cfg0 = 0x0
+ant_cfg1 = 0x0
+isolation_cfg0 = 0x0505
+isolation_cfg1 = 0x0
+reserved_cfg0 = 0x0
+reserved_cfg1 = 0x0
+reserved_cfg2 = 0x0
+reserved_cfg3 = 0x0
+reserved_cfg4 = 0x0
+reserved_cfg5 = 0x0
+reserved_cfg6 = 0x0
+reserved_cfg7 = 0x0
+
+[Section 14: rf_tlv_config]
+rf_config = 0xAA,0x55,0x00,0xFF,0x8,0xA,0x0,0x5,0x0,0x0,0x0,0x0,0x0,0x0
+

board/orangepi_zero_2w/rootfs_overlay/usr/lib/init/colors.sh

@@ -0,0 +1,82 @@
+#!/bin/sh
+
+#--- reset colors ---
+RESET="\033[0m"
+#--------------------
+
+#--------- regularcolrs ---------
+GREEN="\033[0;32m"       #GREEN
+BLUE="\033[0;34m"        #BLUE
+YELLOW="\033[1;33m"      #YELLOW
+RED="\033[0;31m"         #RED
+BLACK="\033[0;30m"       #BLACK
+PURPLE="\033[0;35m"      #PURPLE
+CYAN="\033[0;36m"        #CYAN
+WHITE="\033[0;37m"       #WHITE
+#--------------------------------
+
+#-------- bold ------------------
+BBLACK="\033[1;30m"      #BLACK
+BRED="\033[1;31m"        #RED
+BGREEN="\033[1;32m"      #GREEN
+BYELLOW="\033[1;33m"     #YELLOW
+BBLUE="\033[1;34m"       #BLUE
+BPURPLE="\033[1;35m"     #PURPLE
+BCYAN="\033[1;36m"       #CYAN
+BWHITE="\033[1;37m"      #WHITE
+#--------------------------------
+
+#-------- Underline -------------
+UBLACK="\033[4;30m"      #BLACK
+URED="\033[4;31m"        #RED
+UGREEN="\033[4;32m"      #GREEN
+UYELLOW="\033[4;33m"     #YELLOW
+UBLUE="\033[4;34m"       #BLUE
+UPURPLE="\033[4;35m"     #PURPLE
+UCYAN="\033[4;36m"       #CYAN
+UWHITE="\033[4;37m"      #WHITE
+#--------------------------------
+
+#--------- Background -----------
+ON_BLACK="\033[40m"      #BLACK
+ON_RED="\033[41m"        #RED
+ON_GREEN="\033[42m"      #GREEN
+ON_YELLOW="\033[43m"     #YELLOW
+ON_BLUE="\033[44m"       #BLUE
+ON_PURPLE="\033[45m"     #PURPLE
+ON_CYAN="\033[46m"       #CYAN
+ON_WHITE="\033[47m"      #WHITE
+#--------------------------------
+
+#------ HighIntensity -----------
+IBLACK="\033[0;90m"      #BLACK
+IRED="\033[0;91m"        #RED
+IGREEN="\033[0;92m"      #GREEN
+IYELLOW="\033[0;93m"     #YELLOW
+IBLUE="\033[0;94m"       #BLUE
+IPURPLE="\033[0;95m"     #PURPLE
+ICYAN="\033[0;96m"       #CYAN
+IWHITE="\033[0;97m"      #WHITE
+#--------------------------------
+
+#------ BoldHighIntensity -------
+BIBLACK="\033[1;90m"     #BLACK
+BIRED="\033[1;91m"       #RED
+BIGREEN="\033[1;92m"     #GREEN
+BIYELLOW="\033[1;93m"    #YELLOW
+BIBLUE="\033[1;94m"      #BLUE
+BIPURPLE="\033[1;95m"    #PURPLE
+BICYAN="\033[1;96m"      #CYAN
+BIWHITE="\033[1;97m"     #WHITE
+#--------------------------------
+
+#--- HighIntensitybackgrounds ---
+ON_IBLACK="\033[0;100m"  #BLACK
+ON_IRED="\033[0;101m"    #RED
+ON_IGREEN="\033[0;102m"  #GREEN
+ON_IYELLOW="\033[0;103m" #YELLOW
+ON_IBLUE="\033[0;104m"   #BLUE
+ON_IPURPLE="\033[0;105m" #PURPLE
+ON_ICYAN="\033[0;106m"   #CYAN
+ON_IWHITE="\033[0;107m"  #WHITE
+#--------------------------------

board/orangepi_zero_2w/rootfs_overlay/usr/share/udhcpc/default.script

@@ -0,0 +1,65 @@
+#!/bin/sh
+
+[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
+RESOLV_CONF="/etc/resolv.conf"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+# return 0 if root is mounted on a network filesystem
+root_is_nfs() {
+	grep -qe '^/dev/root.*\(nfs\|smbfs\|ncp\|coda\) .*' /proc/mounts
+}
+
+have_bin_ip=0
+if [ -x /usr/bin/ip ]; then
+  have_bin_ip=1
+fi
+
+case "$1" in
+	deconfig)
+		if ! root_is_nfs ; then
+            if [ $have_bin_ip -eq 1 ]; then
+                ip addr flush dev $interface
+                ip link set dev $interface up
+            else
+                /usr/bin/ifconfig $interface 0.0.0.0
+            fi
+		fi
+		;;
+	renew|bound)
+        if [ $have_bin_ip -eq 1 ]; then
+            ip addr add dev $interface local $ip/$mask $BROADCAST
+        else
+            /usr/bin/ifconfig $interface $ip $BROADCAST $NETMASK
+        fi
+
+		if [ -n "$router" ] ; then
+			if ! root_is_nfs ; then
+                if [ $have_bin_ip -eq 1 ]; then
+                    while ip route del default 2>/dev/null ; do
+                        :
+                    done
+                else
+                    while route del default gw 0.0.0.0 dev $interface 2>/dev/null ; do
+                        :
+                    done
+                fi
+			fi
+			metric=0
+			for i in $router ; do
+                if [ $have_bin_ip -eq 1 ]; then
+                    ip route add default via $i metric $((metric++))
+                else
+                    route add default gw $i dev $interface metric $((metric++)) 2>/dev/null
+                fi
+			done
+		fi
+		echo -n > $RESOLV_CONF
+		[ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
+		for i in $dns ; do
+			echo adding dns $i
+			echo nameserver $i >> $RESOLV_CONF
+		done
+		;;
+esac
+exit 0

board/orangepi_zero_2w/sun50i-h618-orangepi-zero2w.dts

@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero2 W";
+	compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		ethernet0 = &emac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			label = "green_led";
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		100m_link {
+			label = "100m_link";
+			gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+			default-state = "off";
+		};
+
+		100m_act {
+			label = "100m_act";
+			gpios = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+			default-state = "off";
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+        compatible = "regulator-fixed";
+        regulator-name = "vcc-3v3";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+        regulator-always-on;
+    };
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi and BT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "osc32k-out";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+		post-power-on-delay-ms = <200>;
+	};
+
+	ac200_pwm_clk: ac200_clk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		// pwm5 period_ns = 500 > 334 for select 24M clock.
+		pwms = <&pwm 5 500 0>;
+		clock-frequency = <2000000>;
+		status = "okay";
+	};
+};
+
+&pwm5 {
+	// clk_bypass_output = 1 for Clock direct output without frequency division
+	// so pwm5 output is 24MHz for AC200 & AC300 clock
+	clk_bypass_output = <0x1>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	//hvcc-supply = <&reg_bldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&gpu {
+	status = "okay";
+	#cooling-cells = <2>;
+	mali-supply = <&reg_dcdc1>;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313a: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		wakeup-source;
+
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators{
+			reg_dcdc1: dcdc1 {
+				regulator-name = "axp313a-dcdc1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-always-on;
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-name = "axp313a-dcdc2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-name = "axp313a-dcdc3";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-always-on;
+			};
+
+			reg_aldo1: ldo1 {
+				regulator-name = "axp313a-aldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-always-on;
+			};
+
+			reg_dldo1: ldo2 {
+				regulator-name = "axp313a-dldo1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "disabled";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "disabled";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_rx_pin>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pi_pins>;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pi_pins>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pi_pins>;
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pa_pins>;
+
+	ac200_x: mfd@10 {
+		compatible = "x-powers,ac200";
+		reg = <0x10>;
+		clocks = <&ac200_pwm_clk>;
+		// ephy id
+		nvmem-cells = <&ephy_calibration>;
+		nvmem-cell-names = "calibration";
+
+		ac200_ephy: phy {
+			compatible = "x-powers,ac200-ephy";
+			status = "okay";
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_ph_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pi_pins>;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pi_pins>;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_ph_pins>;
+	status = "disabled";
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	spidev@0 {
+		status = "disabled";
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	flash@0 {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		partition@0 {
+            label = "spl-uboot";
+            reg = <0x00000000 0x00200000>; // 2MB
+        };
+        partition@1 {
+            label = "uboot-env";
+            reg = <0x00200000 0x00020000>; // 128KB
+        };
+        partition@2 {
+            label = "rootfs";
+            reg = <0x00220000 0x00de0000>; // 13.875MB
+        };
+	};
+};
+
+&spi1 {
+	status = "disabled";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>, <&spi1_cs1_pin>;
+
+	spidev@1 {
+		compatible = "rohm,dh2228fv";
+		status = "disabled";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+	        "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&ahub_dam_plat {
+	status = "okay";
+};
+
+&ahub_dam_mach {
+	status = "okay";
+};
+
+&ahub1_plat {
+	status = "okay";
+};
+
+&ahub1_mach {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_pi_pin>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pi_pin>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pi_pin>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pi_pin>;
+};
+
+&emac1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	phy-supply = <&reg_dldo1>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&mdio1 {
+	rmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&r_lradc {
+	vref-supply = <&reg_aldo1>;
+	status = "okay";
+
+	button-500 {
+		label = "KEY_1";
+		linux,code = <KEY_1>;
+		channel = <0>;
+		voltage = <500000>;
+	};
+
+	button-800 {
+		label = "KEY_ENTER";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&{/thermal-zones/gpu-thermal} {
+	trips {
+		/delete-node/ gpu_alert;
+		/delete-node/ gpu-crit;
+
+		gpu_alert: gpu-alert {
+			temperature = <95000>;  // подняли с 85000
+			hysteresis = <2000>;
+			type = "passive";
+		};
+	};
+
+	// Отключаем cooling-maps чтобы избежать warning
+	cooling-maps {
+		/delete-node/ map0;
+	};
+};
+
+&{/thermal-zones/cpu-thermal} {
+	trips {
+		/delete-node/ cpu_alert;
+		/delete-node/ cpu-crit;
+
+		cpu_alert: cpu-alert {
+			temperature = <95000>;  // подняли с 85000
+			hysteresis = <2000>;
+			type = "passive";
+		};
+	};
+
+	// Отключаем cooling-maps чтобы избежать warning
+	cooling-maps {
+		/delete-node/ map0;
+	};
+};

board/orangepi_zero_2w/uclibc-1.0.56.config

@@ -0,0 +1,262 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# uClibc-ng 1.0.56 C Library Configuration
+#
+TARGET_aarch64=y
+# TARGET_alpha is not set
+# TARGET_arc is not set
+# TARGET_arm is not set
+# TARGET_avr32 is not set
+# TARGET_bfin is not set
+# TARGET_c6x is not set
+# TARGET_cris is not set
+# TARGET_csky is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_hppa is not set
+# TARGET_i386 is not set
+# TARGET_ia64 is not set
+# TARGET_kvx is not set
+# TARGET_lm32 is not set
+# TARGET_m68k is not set
+# TARGET_metag is not set
+# TARGET_microblaze is not set
+# TARGET_mips is not set
+# TARGET_nds32 is not set
+# TARGET_nios2 is not set
+# TARGET_or1k is not set
+# TARGET_powerpc is not set
+# TARGET_riscv64 is not set
+# TARGET_riscv32 is not set
+# TARGET_sh is not set
+# TARGET_sparc is not set
+# TARGET_sparc64 is not set
+# TARGET_tile is not set
+# TARGET_x86_64 is not set
+# TARGET_xtensa is not set
+TARGET_LDSO_NAME="ld-uClibc"
+TARGET_ARCH_BITS=64
+
+#
+# Target Architecture Features and Options
+#
+TARGET_ARCH="aarch64"
+FORCE_OPTIONS_FOR_ARCH=y
+CONFIG_AARCH64_PAGE_SIZE_4K=y
+# CONFIG_AARCH64_PAGE_SIZE_16K is not set
+# CONFIG_AARCH64_PAGE_SIZE_64K is not set
+TARGET_SUBARCH=""
+
+#
+# Using ELF file format
+#
+ARCH_ANY_ENDIAN=y
+ARCH_LITTLE_ENDIAN=y
+# ARCH_WANTS_BIG_ENDIAN is not set
+ARCH_WANTS_LITTLE_ENDIAN=y
+ARCH_HAS_MMU=y
+ARCH_USE_MMU=y
+UCLIBC_HAS_FLOATS=y
+UCLIBC_HAS_FPU=y
+DO_C99_MATH=y
+DO_XSI_MATH=y
+UCLIBC_HAS_FENV=y
+UCLIBC_HAS_LONG_DOUBLE_MATH=y
+KERNEL_HEADERS=
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+DOPIC=y
+# STATIC_PIE is not set
+HAVE_LDSO=y
+HAVE_SHARED=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+# LDSO_CACHE_SUPPORT is not set
+LDSO_PRELOAD_ENV_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+# LDSO_STANDALONE_SUPPORT is not set
+# LDSO_PRELINK_SUPPORT is not set
+ARCH_VDSO_SUPPORT=y
+# VDSO_SUPPORT is not set
+# UCLIBC_STATIC_LDCONFIG is not set
+LDSO_RUNPATH=y
+LDSO_RUNPATH_OF_EXECUTABLE=y
+LDSO_SAFE_RUNPATH=y
+LDSO_SEARCH_INTERP_PATH=y
+LDSO_LD_LIBRARY_PATH=y
+UCLIBC_CTOR_DTOR=y
+# LDSO_GNU_HASH_SUPPORT is not set
+# HAS_NO_THREADS is not set
+UCLIBC_HAS_THREADS_NATIVE=y
+UCLIBC_HAS_THREADS=y
+UCLIBC_HAS_TLS=y
+# PTHREADS_DEBUG_SUPPORT is not set
+PTHREADS_STACK_DEFAULT_SIZE=2097152
+UCLIBC_HAS_SYSLOG=y
+UCLIBC_HAS_LFS=y
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+UCLIBC_DYNAMIC_ATEXIT=y
+UCLIBC_HAS_UTMPX=y
+UCLIBC_HAS_UTMP=y
+UCLIBC_SUSV2_LEGACY=y
+UCLIBC_SUSV3_LEGACY=y
+# UCLIBC_SUSV3_LEGACY_MACROS is not set
+UCLIBC_SUSV4_LEGACY=y
+# UCLIBC_STRICT_HEADERS is not set
+# UCLIBC_HAS_STUBS is not set
+UCLIBC_HAS_SHADOW=y
+UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
+UCLIBC_HAS___PROGNAME=y
+UCLIBC_HAS_PTY=y
+ASSUME_DEVPTS=y
+UNIX98PTY_ONLY=y
+UCLIBC_HAS_GETPT=y
+UCLIBC_HAS_LIBUTIL=y
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+UCLIBC_FALLBACK_TO_ETC_LOCALTIME=y
+
+#
+# Advanced Library Settings
+#
+UCLIBC_PWD_BUFFER_SIZE=256
+UCLIBC_GRP_BUFFER_SIZE=256
+
+#
+# Support various families of functions
+#
+UCLIBC_LINUX_SPECIFIC=y
+UCLIBC_HAS_GNU_ERROR=y
+UCLIBC_BSD_SPECIFIC=y
+UCLIBC_HAS_BSD_ERR=y
+UCLIBC_HAS_OBSOLETE_BSD_SIGNAL=y
+# UCLIBC_HAS_BSD_B64_NTOP_B64_PTON is not set
+# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
+# UCLIBC_NTP_LEGACY is not set
+# UCLIBC_SV4_DEPRECATED is not set
+UCLIBC_HAS_REALTIME=y
+UCLIBC_HAS_ADVANCED_REALTIME=y
+UCLIBC_HAS_EPOLL=y
+UCLIBC_HAS_XATTR=y
+UCLIBC_HAS_PROFILING=y
+UCLIBC_HAS_CRYPT_IMPL=y
+UCLIBC_HAS_SHA256_CRYPT_IMPL=y
+UCLIBC_HAS_SHA512_CRYPT_IMPL=y
+UCLIBC_HAS_CRYPT=y
+UCLIBC_HAS_NETWORK_SUPPORT=y
+UCLIBC_HAS_SOCKET=y
+UCLIBC_HAS_IPV4=y
+UCLIBC_HAS_IPV6=y
+UCLIBC_USE_NETLINK=y
+UCLIBC_SUPPORT_AI_ADDRCONFIG=y
+# UCLIBC_HAS_BSD_RES_CLOSE is not set
+UCLIBC_HAS_COMPAT_RES_STATE=y
+# UCLIBC_HAS_EXTRA_COMPAT_RES_STATE is not set
+UCLIBC_HAS_RESOLVER_SUPPORT=y
+# UCLIBC_DNSRAND_MODE_URANDOM is not set
+# UCLIBC_DNSRAND_MODE_CLOCK is not set
+UCLIBC_DNSRAND_MODE_PRNGPLUS=y
+# UCLIBC_DNSRAND_MODE_SIMPLECOUNTER is not set
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_STDIO_FUTEXES=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+UCLIBC_HAS_LIBICONV=y
+UCLIBC_HAS_LIBINTL=y
+UCLIBC_HAS_LOCALE=y
+UCLIBC_BUILD_MINIMAL_LOCALE=y
+# UCLIBC_BUILD_ALL_LOCALE is not set
+UCLIBC_BUILD_MINIMAL_LOCALES="en_US"
+UCLIBC_HAS_XLOCALE=y
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+# UCLIBC_HAS_GLIBC_DIGIT_GROUPING is not set
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+# UCLIBC_HAS_FOPEN_CLOSEEXEC_MODE is not set
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+UCLIBC_HAS_GETOPT_LONG=y
+UCLIBC_HAS_GNU_GETSUBOPT=y
+# UCLIBC_HAS_ARGP is not set
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+UCLIBC_HAS_FNMATCH=y
+UCLIBC_HAS_WORDEXP=y
+UCLIBC_HAS_NFTW=y
+UCLIBC_HAS_FTW=y
+# UCLIBC_HAS_FTS is not set
+UCLIBC_HAS_GLOB=y
+UCLIBC_HAS_GNU_GLOB=y
+
+#
+# Library Installation Options
+#
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr"
+MULTILIB_DIR="lib"
+HARDWIRED_ABSPATH=y
+
+#
+# Security options
+#
+UCLIBC_HAS_SSP=y
+# SSP_QUICK_CANARY is not set
+UCLIBC_BUILD_SSP=y
+UCLIBC_BUILD_RELRO=y
+UCLIBC_BUILD_NOW=y
+UCLIBC_BUILD_NOEXECSTACK=y
+
+#
+# Development/debugging options
+#
+CROSS_COMPILER_PREFIX="/home/tola/Documents/linux/buildroot-2024.11/output/host/bin/aarch64-buildroot-linux-uclibc-"
+UCLIBC_EXTRA_CFLAGS=""
+# DODEBUG is not set
+# DOSTRIP is not set
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+# UCLIBC_MALLOC_DEBUGGING is not set
+# UCLIBC_HAS_BACKTRACE is not set
+WARNINGS="-Wall"
+# EXTRA_WARNINGS is not set

board/orangepi_zero_2w/wpa_supplicant.config

@@ -0,0 +1,23 @@
+CONFIG_BACKEND=file
+CONFIG_CTRL_IFACE=y
+CONFIG_DEBUG_FILE=y
+CONFIG_DEBUG_SYSLOG=y
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+CONFIG_DRIVER_NL80211=y
+CONFIG_DRIVER_WEXT=y
+CONFIG_DRIVER_WIRED=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_TTLS=y
+CONFIG_IEEE8021X_EAPOL=y
+CONFIG_IPV6=y
+CONFIG_LIBNL32=y
+CONFIG_PEERKEY=y
+CONFIG_PKCS12=y
+CONFIG_SMARTCARD=y
+CONFIG_WPS=y

board/x86_64_uclibc/busybox-initrd-list-1.36.1.config

@@ -0,0 +1,20 @@
+awk
+blkid
+cat
+fdisk
+find
+findfs
+grep
+hdparm
+ls
+mkdir
+mount
+mountpoint
+pivot_root
+printf
+sed
+sh
+sleep
+switch_root
+umount
+vi

board/x86_64_uclibc/busybox-list-1.36.1.config

@@ -0,0 +1,371 @@
+[
+[[
+acpid
+add-shell
+addgroup
+adduser
+adjtimex
+ar
+arch
+arp
+arping
+ascii
+awk
+base32
+base64
+basename
+bc
+beep
+blkdiscard
+blkid
+blockdev
+bootchartd
+brctl
+bunzip2
+bzcat
+bzip2
+cal
+cat
+chat
+chattr
+chgrp
+chmod
+chown
+chpasswd
+chroot
+chrt
+chvt
+cksum
+clear
+cmp
+comm
+conspy
+cp
+cpio
+crc32
+crond
+crontab
+cryptpw
+cttyhack
+cut
+date
+dc
+dd
+deallocvt
+delgroup
+deluser
+depmod
+devmem
+df
+dhcprelay
+diff
+dirname
+dmesg
+dnsd
+dnsdomainname
+dos2unix
+du
+dumpkmap
+dumpleases
+echo
+ed
+egrep
+eject
+env
+ether-wake
+expand
+expr
+factor
+fakeidentd
+fallocate
+false
+fatattr
+fbset
+fbsplash
+fdflush
+fdformat
+fdisk
+fgconsole
+fgrep
+find
+findfs
+flock
+fold
+free
+freeramdisk
+fsck
+fsfreeze
+fstrim
+fsync
+ftpd
+ftpget
+ftpput
+fuser
+getopt
+getty
+grep
+groups
+gunzip
+gzip
+halt
+hd
+hdparm
+head
+hexdump
+hexedit
+hostid
+hostname
+httpd
+hwclock
+i2cdetect
+i2cdump
+i2cget
+i2cset
+i2ctransfer
+id
+ifconfig
+ifdown
+ifenslave
+ifplugd
+ifup
+inetd
+init
+insmod
+install
+ionice
+iostat
+ip
+ipaddr
+ipcalc
+ipcrm
+ipcs
+iplink
+ipneigh
+iproute
+iprule
+iptunnel
+kbd_mode
+kill
+killall
+killall5
+klogd
+last
+less
+link
+linux32
+linux64
+linuxrc
+ln
+loadfont
+loadkmap
+logger
+login
+logname
+logread
+losetup
+lpd
+lpq
+lpr
+ls
+lsattr
+lsmod
+lsof
+lspci
+lsscsi
+lsusb
+lzcat
+lzma
+lzop
+lzopcat
+makedevs
+man
+md5sum
+mdev
+mesg
+microcom
+mim
+mkdir
+mkdosfs
+mke2fs
+mkfifo
+mkfs.ext2
+mkfs.vfat
+mknod
+mkpasswd
+mkswap
+mktemp
+modinfo
+modprobe
+more
+mount
+mountpoint
+mpstat
+mt
+mv
+nameif
+nanddump
+nandwrite
+nbd-client
+nc
+netstat
+nice
+nl
+nmeter
+nohup
+nologin
+nproc
+nsenter
+nslookup
+ntpd
+od
+openvt
+partprobe
+passwd
+paste
+patch
+pgrep
+pidof
+ping
+ping6
+pivot_root
+pkill
+pmap
+poweroff
+powertop
+printenv
+printf
+ps
+pscan
+pstree
+pwd
+pwdx
+raidautorun
+rdate
+rdev
+readahead
+readlink
+readprofile
+realpath
+reboot
+remove-shell
+renice
+reset
+resize
+rev
+rfkill
+rm
+rmdir
+rmmod
+route
+rtcwake
+run-parts
+rx
+script
+scriptreplay
+sed
+seedrng
+seq
+setarch
+setconsole
+setfattr
+setfont
+setkeycodes
+setlogcons
+setpriv
+setserial
+setsid
+sh
+sha1sum
+sha256sum
+sha3sum
+sha512sum
+showkey
+shred
+shuf
+slattach
+sleep
+smemcap
+sort
+split
+ssl_client
+stat
+strings
+stty
+su
+sulogin
+sum
+swapoff
+swapon
+switch_root
+sync
+sysctl
+syslogd
+tac
+tail
+tar
+taskset
+tcpsvd
+tee
+telnet
+telnetd
+test
+tftp
+tftpd
+time
+timeout
+top
+touch
+tr
+traceroute
+traceroute6
+tree
+true
+truncate
+ts
+tsort
+tty
+ttysize
+tunctl
+tune2fs
+udhcpc
+udhcpc6
+udhcpd
+udpsvd
+uevent
+umount
+uname
+uncompress
+unexpand
+uniq
+unix2dos
+unlink
+unlzma
+unlzop
+unshare
+unxz
+unzip
+uptime
+users
+usleep
+uudecode
+uuencode
+vconfig
+vi
+vlock
+volname
+w
+wall
+watch
+watchdog
+wc
+wget
+who
+whoami
+whois
+xargs
+xxd
+xz
+xzcat
+yes
+zcat
+zcip

board/x86_64_uclibc/linux-6.1.91.config

@@ -17,7 +17,7 @@ CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
 CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
 CONFIG_CC_HAS_ASM_INLINE=y
 CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
-CONFIG_PAHOLE_VERSION=127
+CONFIG_PAHOLE_VERSION=130
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
 CONFIG_THREAD_INFO_IN_TASK=y
@@ -1145,6 +1145,7 @@ CONFIG_IP6_NF_MANGLE=y
 
 CONFIG_NF_DEFRAG_IPV6=y
 # CONFIG_NF_CONNTRACK_BRIDGE is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_BPFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
@@ -1152,9 +1153,14 @@ CONFIG_NF_DEFRAG_IPV6=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_BRIDGE_MRP is not set
+# CONFIG_BRIDGE_CFM is not set
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set

board/x86_64_uclibc/uclibc-1.0.56.config

@@ -0,0 +1,264 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# uClibc-ng 1.0.56 C Library Configuration
+#
+# TARGET_aarch64 is not set
+# TARGET_alpha is not set
+# TARGET_arc is not set
+# TARGET_arm is not set
+# TARGET_avr32 is not set
+# TARGET_bfin is not set
+# TARGET_c6x is not set
+# TARGET_cris is not set
+# TARGET_csky is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_hppa is not set
+# TARGET_i386 is not set
+# TARGET_ia64 is not set
+# TARGET_kvx is not set
+# TARGET_lm32 is not set
+# TARGET_m68k is not set
+# TARGET_metag is not set
+# TARGET_microblaze is not set
+# TARGET_mips is not set
+# TARGET_nds32 is not set
+# TARGET_nios2 is not set
+# TARGET_or1k is not set
+# TARGET_powerpc is not set
+# TARGET_riscv64 is not set
+# TARGET_riscv32 is not set
+# TARGET_sh is not set
+# TARGET_sparc is not set
+# TARGET_sparc64 is not set
+# TARGET_tile is not set
+TARGET_x86_64=y
+# TARGET_xtensa is not set
+TARGET_LDSO_NAME="ld64-uClibc"
+TARGET_ARCH_BITS=64
+
+#
+# Target Architecture Features and Options
+#
+TARGET_ARCH="x86_64"
+FORCE_OPTIONS_FOR_ARCH=y
+TARGET_SUBARCH=""
+
+#
+# Using ELF file format
+#
+ARCH_HAS_DEPRECATED_SYSCALLS=y
+ARCH_LITTLE_ENDIAN=y
+
+#
+# Using Little Endian
+#
+ARCH_HAS_MMU=y
+ARCH_USE_MMU=y
+UCLIBC_HAS_FLOATS=y
+UCLIBC_HAS_FPU=y
+DO_C99_MATH=y
+DO_XSI_MATH=y
+# UCLIBC_HAS_FENV is not set
+UCLIBC_HAS_LONG_DOUBLE_MATH=y
+KERNEL_HEADERS=
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+DOPIC=y
+# STATIC_PIE is not set
+ARCH_HAS_UCONTEXT=y
+HAVE_LDSO=y
+HAVE_SHARED=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+# LDSO_CACHE_SUPPORT is not set
+LDSO_PRELOAD_ENV_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+# LDSO_STANDALONE_SUPPORT is not set
+# LDSO_PRELINK_SUPPORT is not set
+ARCH_VDSO_SUPPORT=y
+# VDSO_SUPPORT is not set
+# UCLIBC_STATIC_LDCONFIG is not set
+LDSO_RUNPATH=y
+LDSO_RUNPATH_OF_EXECUTABLE=y
+LDSO_SAFE_RUNPATH=y
+LDSO_SEARCH_INTERP_PATH=y
+LDSO_LD_LIBRARY_PATH=y
+UCLIBC_CTOR_DTOR=y
+# LDSO_GNU_HASH_SUPPORT is not set
+# HAS_NO_THREADS is not set
+# UCLIBC_HAS_LINUXTHREADS is not set
+UCLIBC_HAS_THREADS_NATIVE=y
+UCLIBC_HAS_THREADS=y
+UCLIBC_HAS_TLS=y
+# PTHREADS_DEBUG_SUPPORT is not set
+PTHREADS_STACK_DEFAULT_SIZE=2097152
+UCLIBC_HAS_SYSLOG=y
+UCLIBC_HAS_LFS=y
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+UCLIBC_DYNAMIC_ATEXIT=y
+UCLIBC_HAS_UTMPX=y
+UCLIBC_HAS_UTMP=y
+UCLIBC_SUSV2_LEGACY=y
+UCLIBC_SUSV3_LEGACY=y
+UCLIBC_HAS_CONTEXT_FUNCS=y
+# UCLIBC_SUSV3_LEGACY_MACROS is not set
+UCLIBC_SUSV4_LEGACY=y
+# UCLIBC_STRICT_HEADERS is not set
+# UCLIBC_HAS_STUBS is not set
+UCLIBC_HAS_SHADOW=y
+UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
+UCLIBC_HAS___PROGNAME=y
+UCLIBC_HAS_PTY=y
+ASSUME_DEVPTS=y
+UNIX98PTY_ONLY=y
+UCLIBC_HAS_GETPT=y
+UCLIBC_HAS_LIBUTIL=y
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+UCLIBC_FALLBACK_TO_ETC_LOCALTIME=y
+
+#
+# Advanced Library Settings
+#
+UCLIBC_PWD_BUFFER_SIZE=256
+UCLIBC_GRP_BUFFER_SIZE=256
+
+#
+# Support various families of functions
+#
+UCLIBC_LINUX_SPECIFIC=y
+UCLIBC_HAS_GNU_ERROR=y
+UCLIBC_BSD_SPECIFIC=y
+UCLIBC_HAS_BSD_ERR=y
+UCLIBC_HAS_OBSOLETE_BSD_SIGNAL=y
+# UCLIBC_HAS_BSD_B64_NTOP_B64_PTON is not set
+# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
+# UCLIBC_NTP_LEGACY is not set
+# UCLIBC_SV4_DEPRECATED is not set
+UCLIBC_HAS_REALTIME=y
+UCLIBC_HAS_ADVANCED_REALTIME=y
+UCLIBC_HAS_EPOLL=y
+UCLIBC_HAS_XATTR=y
+UCLIBC_HAS_PROFILING=y
+UCLIBC_HAS_CRYPT_IMPL=y
+UCLIBC_HAS_SHA256_CRYPT_IMPL=y
+UCLIBC_HAS_SHA512_CRYPT_IMPL=y
+UCLIBC_HAS_CRYPT=y
+UCLIBC_HAS_NETWORK_SUPPORT=y
+UCLIBC_HAS_SOCKET=y
+UCLIBC_HAS_IPV4=y
+UCLIBC_HAS_IPV6=y
+UCLIBC_USE_NETLINK=y
+UCLIBC_SUPPORT_AI_ADDRCONFIG=y
+# UCLIBC_HAS_BSD_RES_CLOSE is not set
+UCLIBC_HAS_COMPAT_RES_STATE=y
+# UCLIBC_HAS_EXTRA_COMPAT_RES_STATE is not set
+UCLIBC_HAS_RESOLVER_SUPPORT=y
+# UCLIBC_DNSRAND_MODE_URANDOM is not set
+# UCLIBC_DNSRAND_MODE_CLOCK is not set
+UCLIBC_DNSRAND_MODE_PRNGPLUS=y
+# UCLIBC_DNSRAND_MODE_SIMPLECOUNTER is not set
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_STDIO_FUTEXES=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+UCLIBC_HAS_LIBICONV=y
+UCLIBC_HAS_LIBINTL=y
+UCLIBC_HAS_LOCALE=y
+UCLIBC_BUILD_MINIMAL_LOCALE=y
+# UCLIBC_BUILD_ALL_LOCALE is not set
+UCLIBC_BUILD_MINIMAL_LOCALES="en_US"
+UCLIBC_HAS_XLOCALE=y
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+# UCLIBC_HAS_GLIBC_DIGIT_GROUPING is not set
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+# UCLIBC_HAS_FOPEN_CLOSEEXEC_MODE is not set
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+UCLIBC_HAS_GETOPT_LONG=y
+UCLIBC_HAS_GNU_GETSUBOPT=y
+# UCLIBC_HAS_ARGP is not set
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+UCLIBC_HAS_FNMATCH=y
+UCLIBC_HAS_WORDEXP=y
+UCLIBC_HAS_NFTW=y
+UCLIBC_HAS_FTW=y
+# UCLIBC_HAS_FTS is not set
+UCLIBC_HAS_GLOB=y
+UCLIBC_HAS_GNU_GLOB=y
+
+#
+# Library Installation Options
+#
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr"
+MULTILIB_DIR="lib"
+HARDWIRED_ABSPATH=y
+
+#
+# Security options
+#
+UCLIBC_HAS_SSP=y
+# SSP_QUICK_CANARY is not set
+UCLIBC_BUILD_SSP=y
+UCLIBC_BUILD_RELRO=y
+UCLIBC_BUILD_NOW=y
+UCLIBC_BUILD_NOEXECSTACK=y
+
+#
+# Development/debugging options
+#
+CROSS_COMPILER_PREFIX="/home/tola/Documents/linux/orangepipc/buildroot-2024.08.2/output/host/bin/x86_64-buildroot-linux-uclibc-"
+UCLIBC_EXTRA_CFLAGS=""
+# DODEBUG is not set
+# DOSTRIP is not set
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+# UCLIBC_MALLOC_DEBUGGING is not set
+# UCLIBC_HAS_BACKTRACE is not set
+WARNINGS="-Wall"
+# EXTRA_WARNINGS is not set

configs/orangepi_pc_defconfig

@@ -12,6 +12,7 @@ export distro_build_id="rolling"
 export distro_desc="Simple linux distro"              # distro desctiption
 export distro_codename="zero_zero_one"                 # distro codename
 export BOARD_NAME=orangepi_pc
+export DEFAULT_HOSTNAME=$BOARD_NAME
 export out=$root/out                                  # output directory
 export build=$root/build                              # build directory
 export sourcesfilename=sources.txt                    # sources file for downloading
@@ -24,17 +25,27 @@ export makeflags=-j$(nproc) # makeflags
 export CROSS_COMPILE=arm-buildroot-linux-uclibcgnueabihf
 export ARCH=arm
 export sdroot=$out/sdroot
-export UCLIBC_CONFIG_FILE=${root}/board/${BOARD_NAME}/uclibc-1.0.50.config
+export COFIG_NOCLEAN=n
+export UCLIBC_VERSION=1.0.56
+export UCLIBC_CONFIG_FILE=${root}/board/${BOARD_NAME}/uclibc-${UCLIBC_VERSION}.config
 
 export KERNEL_VERSION=6.13.3
 export KERNEL_CONFIG_FILE=${root}/board/${BOARD_NAME}/linux-${KERNEL_VERSION}.config
 
 export UBOOT_DEFCONFIG=orangepi_pc_defconfig
 
+export BUSYBOX_VERSION=1.36.1
+export BUSYBOX_CONFIG_FILE=$root/board/${BOARD_NAME}/busybox-${BUSYBOX_VERSION}.config
+export BUSYBOX_INITRD_CONFIG_FILE=$root/board/${BOARD_NAME}/busybox-initrd-${BUSYBOX_VERSION}.config
+export BUSYBOX_LIST_FILE=$root/board/${BOARD_NAME}/busybox-list-${BUSYBOX_VERSION}.config
+export BUSYBOX_INITRD_LIST_FILE=$root/board/${BOARD_NAME}/busybox-initrd-list-${BUSYBOX_VERSION}.config
+
+export ROOTFS_OVERLAY=$root/board/${BOARD_NAME}/rootfs_overlay
+
 export ZLIB_ENABLE=y
 export DROPBEAR_ENABLE=y
 export IMAGE_USABLE_ENABLE=y
-export IMAGE_ENABLE=y
+export IMAGE_ENABLE=n
 export SFTP_SERVER_ENABLE=y
 export CURL_ENABLE=n
 export BASH_ENABLE=n
@@ -50,4 +61,11 @@ export DNSMASQ_ENABLE=n
 export IPTABLES_ENABLE=n
 export KO8821AU_ENABLE=n
 export FINIT_INIT_ENABLE=y
+export LIBSQLITE3_ENABLE=n
+export LM_SENSORS_ENABLE=n
+export LRZSZ_ENABLE=n
+export TCC_C_COMPILER_ENABLE=n
+export NGINX_ENABLE=n
+export DUF_BIN_ENABLE=n
+export CONFIG_MTD_UTILS=n
 #--------------------------------------

configs/orangepi_zero_2w_defconfig

@@ -1,13 +1,18 @@
 #!/bin/bash
 
 #------------ config ------------------
-export PATH=$PATH:/opt/toolchains/aarch64-buildroot-linux-uclibc/bin
+export PATH=$PATH:/opt/toolchains/aarch64-buildroot-linux-uclibc_sdk-buildroot/bin
+export PKG_CONFIG_PATH=/opt/toolchains/aarch64-buildroot-linux-uclibc_sdk-buildroot/aarch64-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig
 export version=0.0.1                                  # script version
 export root=$(pwd)                                    # root build directory
-export distro_name="Simple"                           # distro name
+export distro_name="Simple Linux"                           # distro name
+export distro_pretty_name="Simple Linux"
+export distro_id="simple"
+export distro_build_id="rolling"
 export distro_desc="Simple linux distro"              # distro desctiption
 export distro_codename="zero_zero_one"                # distro codename
 export BOARD_NAME=orangepi_zero_2w
+export DEFAULT_HOSTNAME=$BOARD_NAME
 export out=$root/out                                  # output directory
 export build=$root/build                              # build directory
 export sourcesfilename=sources.txt                    # sources file for downloading
@@ -20,28 +25,47 @@ export makeflags=-j$(nproc) # makeflags
 export CROSS_COMPILE=aarch64-buildroot-linux-uclibc
 export ARCH=arm64
 export sdroot=$out/sdroot
-export UCLIBC_CONFIG_FILE=$root/board/${BOARD_NAME}/uclibc-1.0.50.config
+export COFIG_NOCLEAN=n
+export UCLIBC_VERSION=1.0.56
+export UCLIBC_CONFIG_FILE=$root/board/${BOARD_NAME}/uclibc-${UCLIBC_VERSION}.config
 
-export KERNEL_VERSION=6.8.6
+export KERNEL_VERSION=orangepi-orange-pi-6.1-sun50iw9
 export KERNEL_CONFIG_FILE=${root}/board/${BOARD_NAME}/linux-${KERNEL_VERSION}.config
 
 export UBOOT_DEFCONFIG=orangepi_zero2w_defconfig
 
-export ZLIB_ENABLE=y
-export DROPBEAR_ENABLE=y
-export IMAGE_USABLE_ENABLE=y
-export SFTP_SERVER_ENABLE=y
+export BUSYBOX_VERSION=1.37.0
+export BUSYBOX_CONFIG_FILE=$root/board/${BOARD_NAME}/busybox-${BUSYBOX_VERSION}.config
+export BUSYBOX_INITRD_CONFIG_FILE=$root/board/${BOARD_NAME}/busybox-initrd-${BUSYBOX_VERSION}.config
+export BUSYBOX_LIST_FILE=$root/board/${BOARD_NAME}/busybox-list-${BUSYBOX_VERSION}.config
+export BUSYBOX_INITRD_LIST_FILE=$root/board/${BOARD_NAME}/busybox-initrd-list-${BUSYBOX_VERSION}.config
+
+export ROOTFS_OVERLAY=$root/board/${BOARD_NAME}/rootfs_overlay
+
+export ZLIB_ENABLE=n
+export DROPBEAR_ENABLE=n
+export IMAGE_USABLE_ENABLE=n
+export IMAGE_ENABLE=n
+export SFTP_SERVER_ENABLE=n
 export CURL_ENABLE=n
 export BASH_ENABLE=n
 export GIT_ENABLE=n
 export GITEA_ENABLE=n
-export LIBNL_ENABLE=y
-export IW_ENABLE=y
-export WIRELES_TOOLS_ENABLE=y
-export WPA_SUPPLICANT_ENABLE=y
-export HOSTAPD_ENABLE=y
-export OPENSSL_ENABLE=y
-export DNSMASQ_ENABLE=y
-export IPTABLES_ENABLE=y
+export LIBNL_ENABLE=n
+export IW_ENABLE=n
+export WIRELES_TOOLS_ENABLE=n
+export WPA_SUPPLICANT_ENABLE=n
+export HOSTAPD_ENABLE=n
+export OPENSSL_ENABLE=n
+export DNSMASQ_ENABLE=n
+export IPTABLES_ENABLE=n
 export KO8821AU_ENABLE=n
+export FINIT_INIT_ENABLE=y
+export LIBSQLITE3_ENABLE=n
+export LM_SENSORS_ENABLE=y
+export LRZSZ_ENABLE=n
+export TCC_C_COMPILER_ENABLE=n
+export NGINX_ENABLE=n
+export DUF_BIN_ENABLE=n
+export CONFIG_MTD_UTILS=n
 #--------------------------------------

configs/x86_64_uclibc_defconfig

@@ -12,6 +12,7 @@ export distro_build_id="rolling"
 export distro_desc="Simple linux distro"              # distro desctiption
 export distro_codename="zero_zero_one"                # distro codename
 export BOARD_NAME="x86_64_uclibc"
+export DEFAULT_HOSTNAME=$BOARD_NAME
 export out=$root/out                                  # output directory
 export build=$root/build                              # build directory
 export sourcesfilename=sources.txt                    # sources file for downloading
@@ -24,11 +25,19 @@ export makeflags=-j$(nproc) # makeflags
 export CROSS_COMPILE=x86_64-buildroot-linux-uclibc
 export ARCH=x86_64
 export diskroot=$out/diskroot
-export UCLIBC_CONFIG_FILE=${root}/board/${BOARD_NAME}/uclibc-1.0.50.config
+export COFIG_NOCLEAN=n
+export UCLIBC_VERSION=1.0.56
+export UCLIBC_CONFIG_FILE=${root}/board/${BOARD_NAME}/uclibc-${UCLIBC_VERSION}.config
 
 export KERNEL_VERSION=6.1.91
 export KERNEL_CONFIG_FILE=${root}/board/${BOARD_NAME}/linux-${KERNEL_VERSION}.config
 
+export BUSYBOX_VERSION=1.36.1
+export BUSYBOX_CONFIG_FILE=$root/board/${BOARD_NAME}/busybox-${BUSYBOX_VERSION}.config
+export BUSYBOX_INITRD_CONFIG_FILE=$root/board/${BOARD_NAME}/busybox-initrd-${BUSYBOX_VERSION}.config
+export BUSYBOX_LIST_FILE=$root/board/${BOARD_NAME}/busybox-list-${BUSYBOX_VERSION}.config
+export BUSYBOX_INITRD_LIST_FILE=$root/board/${BOARD_NAME}/busybox-initrd-list-${BUSYBOX_VERSION}.config
+
 export ZLIB_ENABLE=y
 export DROPBEAR_ENABLE=y
 export IMAGE_USABLE_ENABLE=n
@@ -38,5 +47,13 @@ export CURL_ENABLE=n
 export BASH_ENABLE=n
 export GIT_ENABLE=n
 export GITEA_ENABLE=n
+export OPENSSL_ENABLE=n
 export FINIT_INIT_ENABLE=y
+export LIBSQLITE3_ENABLE=n
+export LM_SENSORS_ENABLE=n
+export LRZSZ_ENABLE=n
+export TCC_C_COMPILER_ENABLE=n
+export NGINX_ENABLE=n
+export DUF_BIN_ENABLE=n
+export CONFIG_MTD_UTILS=n
 #--------------------------------------

extlinux/extlinux_usable.conf

@@ -2,4 +2,4 @@ LABEL default
     kernel /boot/zImage
     initrd /boot/initramfs.img
     devicetreedir /boot/dtbs
-    append root=UUID=ROOTUUID rw rootwait console=${console} rootfstype=ext4 panic=10
+    append root=UUID=ROOTUUID rw rootwait console=${console} rootfstype=ext4 panic=10 init=/init

rootfs/overlay/etc/finit.d/available/getty.conf

@@ -1,3 +1,6 @@
 # Consoles to start getty on when system is up
 tty [12345] /dev/ttyS0 noclear nowait
 tty [12345] /dev/tty1  noclear nowait
+tty [12345] /dev/tty2  noclear nowait
+tty [12345] /dev/tty3  noclear nowait
+tty [12345] /dev/tty4  noclear nowait

rootfs/overlay/etc/finit.d/available/hostname.conf

@@ -1 +1 @@
-run [123456789] hostname -F /etc/hostname -- Set up hostname
+task [S] hostname -F /etc/hostname

rootfs/overlay/etc/finit.d/available/iptables.conf

@@ -0,0 +1 @@
+run [2345] iptables-restore /etc/iptables.conf -- Restore iptables rules

rootfs/overlay/etc/finit.d/available/sysctl.conf

@@ -0,0 +1 @@
+run [2345] sysctl -p -- Restore sysctl rules

scripts/8821au_ko.sh

@@ -9,7 +9,7 @@ ko8821au() {
     pkgname=8821au
     pkgver=20210708
     gitsrc=https://github.com/morrownr/8821au-20210708.git
-    printf "$GREEN** Building and installing $pkgname\n$RESET"
+    print_info "** Building and installing $pkgname"
     [ ! -d $build/$pkgname ] && mkdir $build/$pkgname
     cd $build/$pkgname
     git clone $gitsrc

scripts/bash.sh

@@ -7,10 +7,18 @@
 bash() {
     pkgname=bash
     pkgver=5.2.32
-    printf "$GREEN** Building and installing bash\n$RESET"
-    mkdir $build/${pkgname}
+    srcurl=https://ftp.gnu.org/gnu/${pkgname}/${pkgname}-${pkgver}.tar.gz
+    print_info "** Building and installing bash"
+    mkdir -p $build/${pkgname}
     cd $build/${pkgname}
-    tar -xvf $root/downloads/${pkgname}-${pkgver}.tar.gz
+    if [ ! -f $root/downloads/${pkgname}-${pkgver}.tar.gz ]; then
+        print_info "** Downloading $srcurl"
+        cd $root/downloads
+        wget $srcurl
+        check $? "download $srcurl"
+        cd -
+    fi
+    tar -xf $root/downloads/${pkgname}-${pkgver}.tar.gz
     check $? "Extract ${pkgname}"
     cd ${pkgname}-${pkgver}
     ./configure \

scripts/build_image.sh

@@ -17,12 +17,26 @@
 . ./scripts/iptables.sh
 . ./scripts/8821au_ko.sh
 . ./scripts/finit_init.sh
+. ./scripts/libsqlite3.sh
+. ./scripts/lm_sensors.sh
+. ./scripts/wpa_supplicant.sh
+. ./scripts/lrzsz.sh
+. ./scripts/tcc.sh
+. ./scripts/zlib.sh
+. ./scripts/nginx.sh
+. ./scripts/duf_bin.sh
+. ./scripts/curl.sh
+. ./scripts/dnsmasq.sh
+. ./scripts/git.sh
+. ./scripts/sftp_server.sh
+. ./scripts/uclibc.sh
+. ./scripts/bash.sh
+. ./scripts/mtd-utils.sh
+. ./scripts/iana-etc.sh
 
 case $1 in
     build)
-        if [ ! -d downloads ]; then
-            download_sources
-        fi
+        [ ! -d downloads ] && mkdir $root/downloads
         rootfs
         if [ "$IMAGE_USABLE_ENABLE" = "y" ]; then
             sdroot_usable
@@ -68,6 +82,54 @@ case $1 in
     initramfs)
         initramfs
         ;;
+    libsqlite3)
+        libsqlite3
+        ;;
+    lm_sensors)
+        lm_sensors
+        ;;
+    wpa_supplicant)
+        build_wpa_supplicant
+        ;;
+    lrzsz)
+        lrzsz-build
+        ;;
+    tcc)
+        tcc_build
+        ;;
+    zlib)
+        zlib
+        ;;
+    nginx)
+        nginx_build
+        ;;
+    duf_bin)
+        duf_bin
+        ;;
+    curl)
+        curl
+        ;;
+    dnsmasq)
+        dnsmasq
+        ;;
+    git)
+        git_build
+        ;;
+    sftp_server)
+        sftp_server
+        ;;
+    uclibc)
+        uclibc
+        ;;
+    bash)
+        bash
+        ;;
+    mtd-utils)
+        mtd-utils
+        ;;
+    iana-etc)
+        iana-etc
+        ;;
     *)
         printf "$UYELLOW** $0 script using: $0 {clean|build|download|rootfs}\n$RESET"
         exit 1

scripts/busybox.sh

@@ -10,38 +10,51 @@
 
 #----------- Building busybox for rootfs ----------
 busybox_rootfs() {
-    printf "$UGREEN** Building busybox for rootfs\n$RESET"
-    rm -rv $build/busybox # &>> $fulllogfile
-    mkdir -pv $build/busybox # &>> $fulllogfile
+    pkgname=busybox
+    pkgver=${BUSYBOX_VERSION}
+    srcurl=https://busybox.net/downloads/${pkgname}-${pkgver}.tar.bz2
+    print_info "** Building busybox for rootfs"
+    [ -d $build/busybox ] && return 0
+    mkdir -p $build/busybox
     cd $build/busybox
-    tar -xvjf $root/downloads/busybox-1.36.1.tar.bz2 # &>> $fulllogfile
-    cd busybox-1.36.1
-    cp -v $root/busybox/busybox-rootfs-config .config # &>> $fulllogfile
-    printf "$UGREEN** Configuring busybox\n$RESET"
-    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- oldconfig # &>> $fulllogfile
+    if [ ! -f $root/downloads/${pkgname}-${pkgver}.tar.bz2 ]; then
+        print_info "** Downloading $srcurl"
+        cd $root/downloads
+        wget $srcurl
+        check $? "download $srcurl"
+        cd -
+    fi
+    tar -xjf $root/downloads/busybox-${BUSYBOX_VERSION}.tar.bz2
+    cd busybox-${BUSYBOX_VERSION}
+    sed -i 's/|| ctx->process_block == sha1_process_block64_shaNI/|| ctx->process_block == sha1_process_block64/' libbb/hash_md5_sha.c
+    cp $root/board/${BOARD_NAME}/busybox-${BUSYBOX_VERSION}.config .config
+    print_info "** Configuring busybox"
+    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- oldconfig
     check $? "Configure busybox all logs in .log"
-    printf "$UGREEN** Building busybox\n$RESET"
-    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- $makeflags # &>> $fulllogfile
+    print_info "** Building busybox"
+    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- $makeflags
     check $? "Build busybox all logs in .log"
+    cp -v busybox $rootfspath/usr/bin
+    cd $rootfspath/usr/bin
+    for i in $(cat $BUSYBOX_LIST_FILE); do ln -sv busybox $i; done
 }
 #--------------------------------------------------
 
 #------------------ Building busybox for initramfs ----------------
 busybox_initramfs() {
-    printf "$UGREEN** Building busybox for initramfs\n$RESET"
-    rm -r $build/busybox # &>> $fulllogfile
+    print_info "** Building busybox for initramfs"
+    [ -f $build/initramfs.img ] && return 0
     mkdir -p $build/busybox
     cd $build/busybox
-    tar -xjf $root/downloads/busybox-1.36.1.tar.bz2
+    tar -xjf $root/downloads/busybox-${BUSYBOX_VERSION}.tar.bz2
     check $? "Extract busybox"
-    cd busybox-1.36.1
-    cp $root/busybox/busybox-initramfs-config .config
-    # export PATH=$PATH:/opt/toolchains/x86_64-buildroot-linux-uclibc-gcc/bin
-    printf "$UGREEN** Configuring busybox\n$RESET"
-    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- oldconfig # &>> $fulllogfile
+    cd busybox-${BUSYBOX_VERSION}
+    cp -v $root/board/${BOARD_NAME}/busybox-initrd-${BUSYBOX_VERSION}.config .config
+    print_info "** Configuring busybox"
+    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- oldconfig
     check $? "Configure busybox all logs in .log"
-    printf "$UGREEN** Building busybox\n$RESET"
-    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- $makeflags # &>> $fulllogfile
+    print_info "** Building busybox"
+    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- $makeflags
     check $? "Build busybox all logs in .log"
 }
 #------------------------------------------------------------------

scripts/busybox/PMBUILD

@@ -10,7 +10,7 @@ export ARCH=arm
 
 configure() {
     cd $srcdir
-    tar -xvf $pkgname-$pkgver.tar.bz2
+    tar -xf $pkgname-$pkgver.tar.bz2
     cd -
     export srcdir=$srcdir/$pkgname-$pkgver
     cp -v busybox.config $srcdir/.config

scripts/clean.sh

@@ -1,8 +1,16 @@
 #!/bin/bash
 
+. ./scripts/funcs.sh
+
+print_info "** Clean all build and outputs (build and out directories)"
+
 if [ -d out ]; then
-	rm -rv out;
+    print_info "** Deleting out directory"
+	rm -rf out;
+	check $? "Delete out directory"
 fi
 if [ -d build ]; then
-    rm -rv build
+    print_info "** Deleting build directory"
+    rm -rf build
+    check $? "Delete build directory"
 fi

scripts/cleanup_rootfs.sh

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+set -x
+
+. ./scripts/colors.sh
+. ./scripts/funcs.sh
+. ./scripts/config.sh
+
+cleanup_rootfs() {
+    if [ "${TCC_C_COMPILER_ENABLE}" = "n" ] && [ "${CONFIG_NOCLEAN}" = "n" ]; then
+        find $rootfspath -type f -name "*.a" -delete
+        find $rootfspath -type f -name "*.la" -delete
+        rm -rv $rootfspath/usr/include
+        rm -rv $rootfspath/usr/share/man
+        rm -rv $rootfspath/usr/lib/pkgconfig
+        rm -rv $rootfspath/usr/share/doc
+        rm -rv $rootfspath/usr/share/info
+        rm -rv $rootfspath/usr/share/bash-completion
+    fi
+    STRIP_FILES=$(file --mime-type $(find $rootfspath -type f) | grep "application/x-executable\|application/x-sharedlib\|application/x-pie-executable" | sed 's/:.*$//')
+    # echo $STRIP_FILES
+    for i in $STRIP_FILES; do
+        ${CROSS_COMPILE}-strip $i
+        echo $i
+    done
+}

scripts/curl.sh

@@ -11,10 +11,19 @@ curl() {
     fi
     pkgname=curl
     pkgver=8.9.1
-    printf "$GREEN** Building and installing curl\n$RESET"
-    mkdir $build/${pkgname}
+    srcurl=https://curl.se/download/${pkgname}-${pkgver}.tar.xz
+    print_info "** Building and installing curl"
+    [ -d $build/${pkgname} ] && return 0
+    mkdir -p $build/${pkgname}
     cd $build/${pkgname}
-    tar -xvf $root/downloads/${pkgname}-${pkgver}.tar.xz
+    if [ ! -f $root/downloads/${pkgname}-${pkgver}.tar.xz ]; then
+        print_info "** Downloading $srcurl"
+        cd $root/downloads
+        wget $srcurl
+        check $? "download $srcurl"
+        cd -
+    fi
+    tar -xf $root/downloads/${pkgname}-${pkgver}.tar.xz
     check $? "Extract ${pkgname}"
     cd ${pkgname}-${pkgver}
     ./configure \
@@ -28,14 +37,5 @@ curl() {
     make $makeflags
     check $? "Build ${pkgname}"
     make DESTDIR=$rootfspath install
-    rm \
-        -rv \
-        $rootfspath/usr/include \
-        $rootfspath/usr/share/aclocal \
-        $rootfspath/usr/share/man \
-        $rootfspath/usr/lib/*.a \
-        $rootfspath/usr/lib/*.la \
-        $rootfspath/usr/lib/pkgconfig
-    $CROSS_COMPILE-strip --strip-unneeded $rootfspath/usr/bin/curl $rootfspath/usr/lib/libcurl.so.4.8.0
     check $? "Installing to rootfs ${pkgname}"
 }