With set_ca_cert_store() after load_ca_cert_store(), the redirect client
trusted the earlier PEM too, though the store had replaced it, and of
several load_ca_cert_store() calls it kept only the last. Take the CAs
from the context when a store was set, and from every PEM loaded
otherwise.
Hostname verification on these backends fell back to the subject CN
even when the certificate had a DNS SAN, unlike X509_check_host and
RFC 6125 6.4.4. It does so only without one now. Mbed TLS also reads
the CN by its OID instead of searching the formatted DN for "CN=", and
no longer stops at an empty SAN.
The Digest uri and A2 took the raw path, while the request line carried
it encoded, with the params and without the fragment, so a server
comparing the two rejected the credentials. Build the target in one
place for both.
set_keep_alive_max_count(0) tripped an assert, a negative WebSocket ping
interval sent pings in a tight loop, and the form length, multipart file
count and range count macros rejected every request at 0. Make 0 mean
no limit for those, and a ping interval of 0 or less turn pings off. The
URI, header and line bounds cannot be lifted, so a static_assert keeps
them positive.
An event stream has no end, but the client's payload_max_length, 100MB
by default, cut it and made the client reconnect. SSEClient lifts that
limit for its stream; each event stays bounded by
CPPHTTPLIB_SSE_MAX_EVENT_LENGTH.
Files have been read with pread() since 44658e6, so the mapping went
unused. Keep only the descriptor, open it close-on-exec and without
waiting on a FIFO, and accept only a regular file, so that a device is
no longer served as an empty body.
A quoted boundary kept its quoted-pairs, as only the quotes were taken
off, and the multipart writer sent a backslash as it was, so a name
ending in one escaped the closing quote for this library's own parser.
Unescape \" and \\ in media type parameters as in Content-Disposition,
and write a backslash as \\.
append_query_params() added the parameters after a '#', where the
fragment, which is not sent, took them along, and write_request() read a
query that came after one. Insert them before the fragment, and leave
the fragment out of the query.
A response framed by Transfer-Encoding next to a Content-Length, or an
HTTP/1.0 response with Transfer-Encoding, left the connection open for
the next request, though RFC 9112 6.1 has such framing treated as faulty
and the connection closed after it. Close it, with the check the server
makes for requests now shared.
get_ca_certs() handed out heap copies of the context's CA certificates,
but free_cert() frees nothing on Mbed TLS, so every copy leaked. Hand
out the context's own certificates instead, as get_peer_certs() does
the session's, and say on the declaration that they last only as long
as the context's CA certificates stay as they are.
This showed up on every redirect from a client given a store with
set_ca_cert_store(), which passes the store on through these
certificates.
A content provider that wrote past the length it was given put the
extra bytes after the framed body, where a keep-alive peer read them as
the next message. Write only what fits and fail the write, on both the
server and the client.
Content-Length and Transfer-Encoding a handler set were sent next to
the ones the library worked out, for ranges and compression, and a
post-routing handler could change the body after Content-Length was
set. Work both out in one place, from the body about to be written,
again after the post-routing handler; a HEAD response keeps the length
its handler gave it. A 1xx, 204 or 304 response sends no body and,
following RFC 9110 8.6, no Content-Length.
The client still sends a Content-Length or Transfer-Encoding its caller
passes, as curl and urllib3 do, and the README says these have to match
the body.
The read timeout applied to each read of the request line and headers,
so a client that sent them a byte now and then held a worker for as
long as it liked, and enough such clients left no worker for anyone
else. Bound the whole head by the read timeout, as the TLS handshake
already is, through a new Stream::set_max_timeout() that the socket
streams implement with their existing max timeout.
A request body is still bounded per read, and a WebSocket holds its
worker for its whole life. The README says so, and points to a
reverse proxy and the pre-request handler for untrusted clients.
A retry or redirect after an early answer to Expect: 100-continue now
opens a new connection, interim responses are also skipped while
waiting for 100 Continue, and a URL Client cannot use, such as one with
userinfo, gives an invalid client. Only a 407 is passed on from a
refused CONNECT, WebSocket::close() sends only a valid payload, and the
SSE client stops on an oversized event rather than reconnect to it.
Media type parameter names and user extension mappings are matched
without case, file content is read in larger chunks from a buffer of
its own, the streaming decompression limit reports
ExceedMaxPayloadSize, and the tests use the existing single-response
server helpers. Comments and the README are brought in line.
The server fuzzer's stream exposed no buffered data, so the fast path of
stream_line_reader::getline was never fuzzed. Hand out what a read
pulled in beyond the bytes asked for, as SocketStream does.
Over TLS a file is copied out of its mapping in this process, so one
truncated while it was being served raised SIGBUS and took the whole
server down. Read it with pread, which comes up short instead.
Credentials and the client certificate stay behind; other headers,
default ones included, go along as RFC 9110 15.4 has it, and so do the
limits and the TLS settings.
A wss client could set its CAs but had no way to pin a certificate. Add
set_server_certificate_verifier() and set_session_verifier(), as
SSLClient has.
INDEX.HTML got the default type, a REMOTE_ADDR spelled in lower case got
past the guard on prohibited header names, and Multipart/Form-Data was
not taken for multipart, though RFC 9110 makes field names and media
types case-insensitive and web servers match extensions so.
OpenSSL allowed client-initiated renegotiation, which runs a handshake
update_certs_pem() does not wait for, and kept sessions and ticket keys
across a change of client CAs, so a client verified under the old ones
could resume. wolfSSL added new client CAs to the old instead of
replacing them, and a bad certificate or key left Mbed TLS and wolfSSL
half updated.
Turn renegotiation off, forget the sessions and ticket keys on a client
CA change, replace wolfSSL's CAs, and check new material before swapping
it in. Note that the update must not be called from a TLS callback.
The Mbed TLS and wolfSSL backends matched *.com, a bare *, vic*.test and
names with empty labels, which OpenSSL rejects. Require two labels after
a wildcard, none in an IDNA label and no empty label, and ignore a
trailing dot on the host, so every backend accepts the same names.
On Mbed TLS and wolfSSL the verification mode is a setting of the
context, and it was changed outside the lock that guards creating a
session from that context.
Any Close payload was echoed back, a 1-byte one, a code that may not be
sent and a reason that is not UTF-8 included. Echo a valid one and
answer the others with 1002, from one place for both read loops.
A non-200 answer to CONNECT was returned as the response, so a proxy, or
anyone on the plain leg to it, could answer an HTTPS request as if the
origin had. Fail the request with Error::ProxyConnection for anything
but a 4xx or 5xx refusal.
Only 100 Continue was skipped, and only without header fields, so a 103
Early Hints was taken for the final response and a 100 with fields threw
the parsing off. Skip every 1xx but 101, along with its header fields.
When the final response came before 100 Continue, the body was never
sent but the connection was kept, so the server could read the next
request as that body. Close it after the response.
parse_url took http://user@evil.com/ for the host "user@evil.com", where
parsers that honour userinfo, or read a backslash as '/', see evil.com.
userinfo is not supported, so reject both.
When the real path of a file under a mount point could not be resolved,
the check that it stays inside the mount point was skipped and the file
was served. Do not serve it from there, and refuse a mount point whose
directory cannot be resolved.
decode_path_component dropped a %u escape of a surrogate, joining what
was on either side of it, so /ad%uD800min became /admin after a filter
had seen something else. Keep such an escape as it is.
Any run of spaces or tabs separated the parts of the request line, a
fragment in the target was stripped, and an HTTP/1.1 request without
Host was served, so a server or a cache in front that follows RFC 9112
could see another request. Require a single SP between the parts, and
answer a target with '#' and an HTTP/1.1 request without Host with 400.
The client no longer sends the fragment of a URL.
RFC 9112 6.1 has a server close the connection after answering a
request with both Transfer-Encoding and Content-Length, or with
Transfer-Encoding in HTTP/1.0. Close it, and send Connection: close
whenever the connection closes after a response.
split_unquoted ended a quoted-string at an escaped quote, so
name="a\"; filename=evil.php" came apart into a name and a filename that
a parser in front following RFC 9110 would not see. Skip quoted-pairs
when splitting, and unescape \" and \\ in Content-Disposition values,
leaving other backslashes, such as those of a Windows path, as they are.
A part header arriving a few bytes at a time was searched for its CRLF
from the start on every read, which made parsing it quadratic. Remember
how far the search got.
The SSE client buffered a line, or the data of an event, with no limit
of its own, and with payload_max_length(0) with none at all. Add
CPPHTTPLIB_SSE_MAX_EVENT_LENGTH (16MB) and end the connection with
ExceedMaxPayloadSize past it.
Every continuation frame could be as long as the whole message limit,
and the total was checked only after appending it, so a fragmented
message could take about twice the limit. Read each fragment against
what is left, with room for a control frame between them.
The client reserved what Content-Length claimed, up to
payload_max_length, before any of the body arrived, and without a limit
nothing bounded it. Reserve at most 1 MiB up front and let a longer body
grow as it is read.
An unsupported scheme without exceptions, or a port out of range, left
Client with no implementation, so the first request after it went
through a null pointer. Put a client in its place that reports itself
invalid and fails every request with Error::Connection.
CPPHTTPLIB_WEBSOCKET_MAX_PAYLOAD_LENGTH = 0 rejected every frame with a
payload, while 0 means no limit for payload_max_length. Make it mean the
same here, and refuse a length that size_t cannot hold.
set_payload_max_length(0) means no limit, but StreamHandle compared the
decompressed size against 0, so every compressed response read through
the streaming API failed.
case_ignore::hash recursed once per character of the key, and trailer
field names from the wire reach it, so a long one could overflow the
stack of a build that keeps the recursion (-O0). Hash in a loop instead,
which gives the same values.
find_content_type(), can_compress_content_type() and
is_prohibited_header_name() switched on a 26-bit hash of the name and
never compared the name itself, so any name that hashed alike was taken
for a known one. An uploaded file with an unknown extension could be
served as text/html, for one.
Compare the names themselves, and drop the hash and its literal
operator, which nothing else uses.
update_certs_pem() replaced the certificate, key and client CAs inside
the TLS context while handshakes on other threads were still reading
them, and only the creation of a session was serialized with it. A
server rotating its certificates under load could crash.
Count the handshakes in progress, make an update wait until there are
none, and hold off new handshakes while an update is pending so that a
steady stream of them cannot keep it waiting. The wait is bounded by
the handshake timeout.
The handshake loops gave every wait for the socket the full timeout
again, so a peer that sent a byte now and then kept a handshake going,
and the worker serving it, for as long as it liked. Work out the
deadline once and wait only for what is left of it, on both sides and in
every backend.
A cross-host redirect is followed by a new client, which did not get the
payload limit, the max timeout, the connection timeout's microseconds or
the hostname address map. Over HTTPS it also lost the session verifier,
the server certificate verifier and a store given to set_ca_cert_store(),
and fell back to the default CAs. Copy them over. The store belongs to
the original TLS context, so pass on the CA certificates it holds as PEM.
After the redirect, the original client also answered a 401 or 407 from
the new host with its own digest credentials and sent that to its own
host, with the new host's path. Return the redirected response as it is,
since the client that followed it has already answered what it could.
read_websocket_frame() resized the payload to the length a frame header
declared before reading any of it, so a 14-byte header made the peer
allocate and zero-fill up to CPPHTTPLIB_WEBSOCKET_MAX_PAYLOAD_LENGTH and
hold it until the read timed out. 70 such headers took a server to over
1 GB, and a client reading from a hostile server was exposed the same way.
Read the payload in CPPHTTPLIB_RECV_BUFSIZ chunks and grow it by each one,
so memory follows the bytes that actually came in.
std::regex_match recursed once per character of a status line's reason
phrase, so a server that sent one as long as a whole line overflowed the
client's stack. file_extension() and append_query_params() ran the same
kind of regex over a request path and a caller's path.
Parse all three by hand, with the same results, except that a path that
starts with '?' now gets its parameters joined with '&'. Serving a static
file no longer defers the content type lookup to keep a regex off the 304
path, so it looks the type up once.
yhirose