doc: update service modifiers with all new options

Signed-off-by: Joachim Wiberg <troglobit@gmail.com>

doc/config/service-opts.md

@@ -1,23 +1,29 @@
-If a service should not be automatically started, it can be configured
-as manual with the optional `manual` argument. The service can then be
-started at any time by running `initctl start <service>`.
+Service Options
+===============
 
-    manual:yes
+The run/task/tty/service/sysv directives take modifiers, or options, to
+control their behavior.  This section lists them with their limitations.
+All modifiers must be placed between the directive and its command.
 
 The name of a service, shown by the `initctl` tool, defaults to the
-basename of the service executable. It can be changed with the
-optional `name` argument:
+basename of the service executable. It can be changed with the `name:`
+option:
 
     name:<service-name>
 
-If multiple instances of a service, with the same `name`, exist.  Set
-the identifier `:ID` to prevent Finit from replacing previous instances:
+For multiple instances of a service, with the same `name`, set the
+identifier `:ID` to prevent Finit from replacing previous instances:
 
-    service :eth1 ssdpd eth1 -- Windows discovery on eth1
-    service :eth2 ssdpd eth2 -- Windows discovery on eth2
+    service name:ssdp :eth1 ssdpd eth1 -- Windows discovery on eth1
+    service name:ssdp :eth2 ssdpd eth2 -- Windows discovery on eth2
 
-If you have conflicting services and want to prevent them from starting,
-use the `conflict:` argument:
+The [`initctl`](../initctl.md) tool will list these two services as:
+
+ - ssdp:eth1
+ - ssdp:eth2
+
+Conflicting services that must be prevented from starting, use the
+`conflict:` option:
 
     service [S12345789] udevd -- Device event management daemon
 	run [S] conflict:udevd mdev -s -- Populating device tree
@@ -28,8 +34,25 @@ Multiple conflicting services can be separated using `,`:
     service :2 abc
 	service conflict:abc:1,abc:2 cde
 
-As mentioned previously, services are automatically restarted, this is
-configurable with the following options:
+If a service should not be automatically started, it can be configured
+as manual with the optional `manual` argument. The service can then be
+started at any time by running `initctl start <service>`.
+
+    manual:yes
+
+Other run/task/service options are:
+
+  * `cgroups:...` -- see the [Cgroups](cgroups.md) section
+  * `env:[-]/path/to/env` -- see the [Service Environment](service-env.md) section
+  * `log:...` -- see [Redirecting Output](logging.md#redirecting-output)
+  * `nowarn` -- see [Conditional Loading](services.md#conditional-loading)
+  * `notify:...` -- see [Service Synchronization](service-sync.md)
+  * `if:...` -- see [Conditional Execution](services.md#conditional-execution)
+  * `type:forking` -- see description of the [service](services.md) directive
+
+As mentioned previously, services are automatically started, restarted,
+and stopped, depending on the configuration and conditions.  Within the
+confines of that the following options are available:
 
   * `restart:NUM` -- number of times Finit tries to restart a crashing
     service, default: 10, max: 255.  When this limit is reached the
@@ -49,14 +72,14 @@ configurable with the following options:
     has *crashed*, if this option is set the system is rebooted
   * `oncrash:script` -- similarly, but instead of rebooting, call the
     `post:script` action with exit code `crashed`, see below
-  * `reload:script [args]` -- some services do not support `SIGHUP` but
+  * `reload:'script [args]'` -- some services do not support `SIGHUP` but
     may have other ways to update the configuration of a running daemon.
     When `reload:script` is defined it is preferred over `SIGHUP`.  Like
 	systemd, Finit sets `$MAINPID` as a convenience to scripts, which in
 	effect also allow `reload:'kill -HUP $MAINPID'`
-  * `stop:script [args]` -- some services may require alternate methods
-    to be stopped.  When `stop:script` is defined it is preferred over
-    `SIGTERM` and `stop` for `service` and `sysv` stanzas, respectively.
+  * `stop:'script [args]'` -- some services may require alternate methods
+    to be stopped.  If a `stop:script` is defined it is preferred over
+    `SIGTERM` and `stop`, for `service` and `sysv`, respectively.
 	Similar to `reload:script`, Finit sets `$MAINPID`
 
 > [!CAUTION]
@@ -66,12 +89,12 @@ configurable with the following options:
 
 When stopping a service (run/task/sysv/service), either manually or when
 moving to another runlevel, Finit starts by sending `SIGTERM`, to allow
-the process to shut down gracefully.  However, if the process has not
-been collected within 3 seconds, Finit will send `SIGKILL`.  To stop the
-process using a different signal than `SIGTERM`, use `halt:SIGNAL`,
-e.g., `halt:SIGPWR`.  To change the delay between the stop signal and
-KILL, use the option `kill:<1-60>`, e.g., `kill:10` to wait 10 seconds
-before sending `SIGKILL`.
+the process to shut down gracefully (unless a `stop:'script'` is used).
+However, if the process has not been collected within 3 seconds, Finit
+will send `SIGKILL`.  To stop the process using a different signal than
+`SIGTERM`, use `halt:SIGNAL`, e.g., `halt:SIGPWR`.  To change the delay
+between the stop signal and KILL, use the option `kill:<1-60>`, e.g.,
+`kill:10` to wait 10 seconds before sending `SIGKILL`.
 
 Services, including the `sysv` variant, support pre/post/ready and
 cleanup scripts:

doc/config/services.md

@@ -10,7 +10,7 @@ they have to be manually restarted with `initctl restart NAME`.  The
 limits controlling this are configurable, see the options below.
 
 > [!TIP]
-> To allow endless restarts, see below option `respawn`
+> To allow endless restarts, see the [`respawn` option](service-opts.md)
   
 For daemons that support it, we recommend appending `--foreground`,
 `--no-background`, `-n`, `-F`, or similar command line argument to
@@ -151,7 +151,7 @@ which also provides a service named `udevd`.
     run nowarn if:udevd <pid/udevd> :1 udevadm settle -t 0
 
 This line is only loaded if we know of a service named `udevd`.  Again,
-we do not warn if `udevadm` is not found, Execution will also stop here
+we do not warn if `udevadm` is not found, execution will also stop here
 until the PID condition is asserted, i.e., Finit detecting udevd has
 started.
 
@@ -165,9 +165,10 @@ can also be written as:
 
     run nowarn if:!udevd [S] mdev -s -- Populating device tree
 
-The reason for using `confict` in this example is that a conflict can be
+The reason for using `conflict` in this example is that a conflict can be
 resolved.  Stanzas marked with `conflict:foo` are rechecked at runtime.
 
+
 Conditional Execution
 ---------------------
 
@@ -188,7 +189,7 @@ in true sequence.  If loading the file `startup-config` fails confd sets
 the condition `usr/fail-startup`, thus allowing the next run statement
 to load `failure-config`.
 
-Notice critical the difference between `<pid/sysrepo>` condition and
+Notice the critical difference between the `<pid/sysrepo>` condition and
 `if:<usr/fail-startup>`.  The former is a condition for starting and the
 latter is a condition to check if a run/task/service is qualified to
 even be considered.