Add support for the --exclude-prefix=PATH option to skip rules whose
path starts with the specified prefix. The option can be specified
multiple times to exclude multiple path prefixes.
The -E flag is a shortcut for:
--exclude-prefix=/dev --exclude-prefix=/proc \
--exclude-prefix=/run --exclude-prefix=/sys
This is useful to avoid creating files below virtual or memory-backed
file system mount points.
devmon: assert condition immediately if device already exists
1. udev fires early, creates device nodes in /dev/
2. Config is parsed later, calling devmon_add_cond() for each dev/ condition
3. At this point the device already exists but the inotify event was missed
4. The PR's fexist() check catches this — new node is added to the TAILQ and condition is immediately asserted
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The config parsing happens after udev triggers the initial event,
make sure to assert the condition if the device node exists when adding
it from configuration.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
A service that is reloaded should not trigger dependants to be reloaded
unless the new <~cond> is used. Which is reserve for tightly coupled
services.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For SysV services with pid:!/path, the pidfile belongs to the service
itself and Finit shouldn't delete it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This fixes a real bug where `initctl reload syslogd` unconditionally
clears syslogd's pid condition, causing all dependent services (dbus,
dnsmasq, etc.) to be stopped even though syslogd handles SIGHUP
gracefully and its PID/pidfile persist.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A reload: script, like 'frrinit.sh reload' could potentially take a
while to finish, during which Finit would be blocked. This change
reuses the service_script_add(), used for ready: scripts, to track
these background helpers.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When the kernel manages to reap a child process before we've moved it to
its proper cgroup it will return ESRCH (No such process), we can safely
ignore such errors for short-lived processes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Conditions in Finit are dependencies: if A is asserted, service B is
allowed to run. When A goes through FLUX (e.g., upstream reloads),
dependents are PAUSED and then simply resumed when the condition is
reasserted -- this is the correct behavior for barrier-style deps
like <pid/syslogd>.
However, some setups have tightly coupled services where dependents
must be reloaded/restarted when an upstream service reloads, not just
resumed. E.g., the FRR routing stack on Infix OS:
netd <pid/mgmtd> ← zebra <!pid/netd> ← {staticd,ripd} <!pid/zebra>
When netd reloads (SIGHUP), zebra and its dependents must be restarted
to pick up the new configuration.
The new '~' condition prefix marks a dependency as flux-sensitive:
service <!~pid/netd> name:zebra ...
When the upstream condition goes FLUX and returns to ON, the dependent
is reloaded (SIGHUP) or restarted (noreload '!') instead of merely
resumed. Transitivity follows naturally through the condition chain.
Closes#416Closes#476
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When 'initctl reload' is called after marking a service in a dependency
chain dirty, Finit fails to restart (unfreeze) affected services.
This patch updates the pidfile plugin to watch for IN_ATTRIB changes,
e.g. when a process uses utimensat() to update its pidfile, and adds
service_step_all() at end of reload cycle to guarantee convergence
after conditions are reasserted.
Issue #476
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In a setup like this, when 'netd' is marked dirty and subsequently is
reloaded, e.g., using 'initctl reload', zebra is properly restarted,
but staticd isn't:
mgmtd <!> ← netd <pid/mgmtd> ← zebra <!pid/netd> ← staticd <!pid/zebra>
Finit must invalidate the condition of zebra to trigger a restart also
of staticd. This to guard against daemons like zebra that may fail to
clean up their pidfiles.
Fixes#475
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Device conditions tracked by devmon were lost on `initctl reload`
because the reconf path did not re-assert them. Add devmon_reconf()
to iterate all tracked device nodes and set or clear their conditions
based on current device presence.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Verify that 'initctl reload foo' properly triggers dependent
services by checking that bar gets a new PID after the reload.
Also change the second test case from service/foo/running to
service/foo/ready which is the actual condition set by pidfile.so.
Fix a race in slay where the target process could exit between
the PID lookup and kill -9, causing spurious test failures in
tight kill loops (e.g., start-kill-service.sh).
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When reloading a specific service with 'initctl reload foo', the
pid/foo and service/foo/ready conditions were never cleared, so
dependent services were not notified of the reload.
Clear the service's pid condition and, for pid/none notify types,
the ready condition before reloading. The conditions are then
reasserted by the pidfile inotify handler when the service touches
its PID file after processing SIGHUP.
For s6/systemd services the ready condition is left intact since
their readiness notification may not re-trigger on SIGHUP.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Users starting Finit based systems using U-Boot or Barebox may otherwise
not get a visible cursor at their prompt.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Similar to systemd's RemainAfterExit=yes. Prevents the task from
re-running on runlevel re-entry and ensures the post: script runs
when explicitly stopped or when leaving valid runlevels.
Useful for tasks that set up persistent state like firewall rules:
task [2345] remain:yes \
post:/usr/sbin/teardown-firewall \
/usr/sbin/setup-firewall -- Firewall setup
Not supported for bootstrap-only tasks (runlevel S only) since these
are deleted immediately after completion.
Define __NR_clone3 (435) ourselves when not provided by the toolchain
headers. The syscall number is stable kernel ABI and the same on all
architectures since Linux 5.3.
The existing runtime fallback to fork() handles older kernels that don't
support the syscall.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In containerized or virtualized environments, standard mount point
directories may not exist at boot. Ensure they are created before
attempting to mount.
When f or F types write content to a file, the mode and ownership
specified in the config should be applied. Previously, ownership was
only applied when create() was used (i.e., when no argument was
specified).
Now we explicitly apply mode and ownership after writing content to
the file.
According to tmpfiles.d(5), the 'e' type adjusts the mode and ownership
of existing paths but should not create them. Previously, mksubsys()
was used which could create directories.
Now we explicitly check if the path is an existing directory before
adjusting its permissions.
Add parse_uid() and parse_gid() helper functions that support both
numeric IDs and name lookups. Update the d/D directory creation
handlers to use these new functions.
This allows config files to specify ownership using numeric UIDs and
GIDs instead of only usernames and group names, matching systemd-tmpfiles
behavior.
The L+ type should replace existing entries with a symlink. Previously,
rmrf() was always called which is only appropriate for directories.
Now we check if the path is a directory first, and use erase() for
files and symlinks.
Allow specifying one or more configuration files as command line
arguments instead of always processing all files in the standard
tmpfiles.d directories.
This enables targeted operations on specific config files:
tmpfiles --create /etc/tmpfiles.d/myapp.conf
tmpfiles --clean /tmp/test.conf /tmp/other.conf
When no config files are specified, the existing behavior of
processing all *.conf files in the standard directories is preserved.
Also refactors file processing into a helper function to reduce
code duplication.
Add support for the --clean (-C) flag to remove files and directories
older than the age specified in tmpfiles.d configuration entries.
The age field (6th column) in tmpfiles.d entries can now be used with
'd', 'D', and 'e' type entries to clean up old files. Supported time
suffixes are: s (seconds), m (minutes), h (hours), d (days), w (weeks).
Example configuration:
d /tmp/cache 0755 root root 10d
When run with --clean, files in /tmp/cache older than 10 days will be
removed. The directory itself is preserved.
Uses a conservative cleanup approach matching systemd-tmpfiles:
- Files: kept if ANY of atime, ctime, mtime is recent
- Directories: kept if ANY of atime, mtime is recent (ctime excluded
because cleanup itself updates directory ctime)
A value of "-" or "0" for age disables cleanup for that entry.
Note: x/X exclusion patterns are recognized but not yet implemented.
Strings like command, description, and environment may contain characters
that need escaping for valid JSON, e.g., embedded quotes in command line
arguments like -V "NanoPi R2S".
Add json_escape() helper to handle quotes, backslashes, and control chars.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The netlink plugin only receives RTM_NEWLINK events for interfaces that
appear after the plugin starts. Interfaces that already exist at boot
(e.g., virtio-net in QEMU) never generate events, so their conditions
like net/eth0/exist were never set.
Moving enumeration to PLUGIN_INIT doesn't work because it runs before
cond_init(), so the condition filesystem isn't ready yet.
Fix by registering an HOOK_SVC_PLUGIN callback that queries existing
interfaces and routes. This hook runs during conf_init(), after the
condition system is initialized.
When a TTY exited with non-zero code (e.g., user with shell=/sbin/false),
it would enter restart state but never recover, requiring manual restart.
The throttling logic from commit f0032ab had two issues:
1. Duplicate exit code check in service_retry() created infinite timer loop
2. TTYs lacked default restart_tmo, causing timer to never start
Fix by removing duplicate check and ensuring TTYs get a 2-second default
restart_tmo for proper throttling.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg