This change adds support for running hook scripts at two new hook points
during the shutdown process:
- HOOK_SVC_DN: after all services and non-reserved processes have been
killed (and collected)
- HOOK_SYS_DN: after all file systems have been unmounted, *just prior*
to Finit calling reboot() to shut down or reboot the system
See doc/plugins.md for details and an example.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Leave the system as it was when we found it. Also, we'll build things
on top of cond_is_available() to handle pre bootstrap and pre shutdown
tasks.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Always use the configured restart delay for crashing services. If no
delay is configured, we default to an initial 2000 msec for forking
daemons and start-stop scripts, and 1 msec for non-forking daemons.
We must track the increasing delay in the svc_t because processes can
fail quickly in differing ways. E.g, the test daemon 'serv' behaves
extra evil by crashing right after having created its pidile (i.e.,
when it's signaled to Finit it is 'ready' and all is dandy ...). If
we don't track the delay per svc_t we would restart 'serv' after only
1 msec every (other) time.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When there is no log daemon, and we are running in a container, or we
cannot log to the kernel ring buffer, then we log to stderr. This patch
improves the log output by prefixing each message with a timestamp.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds the oncrash:script option to call the post:script
action, if defined, for a crashing service. The EXIT_CODE variable
sent to the script is set to `crashed`.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
By definition, the readiness notification is reserved for daemons. May
possibly be extended also to sysv services later. If you arrive hare
with that request, please file an issue with the project.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Follow-up to abcb3ce, calling the service ready:script when readiness
has been signaled to or detected by Finit.
Issue #300
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Always better to have at least one sulogin available, if the system
provided sulogin isn't available we fall back to the built-in one.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds service readiness notification to support daemons
employing systemd and s6 notification. Complementing the native
Finit readiness support using PID files that exist already.
The two have slightly different ways of implementing readiness:
- https://www.freedesktop.org/software/systemd/man/sd_notify.html
- https://skarnet.org/software/s6/notifywhenup.html
Finit now provides both a NOTIFY_SOCKET environemnt variable, for
systemd, and a way to start s6 daemons with a descriptor argument.
For details on the syntax, see the `service` documentation.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This delays the start of the .conf monitor and service initialization
slightly to allow the event loop to run earlier to process any events
from the initial setup.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch renames the internal states for run/task/services to avoid
any confusion with the introduction of 'ready:scripts'.
* WAITING -> PAUSED
* READY -> WAITING
A service condition that used, e.g., <service/foo/ready> should now
instead use <service/foo/waiting>.
Note: A new condition with the old name <service/foo/ready> will be
introduced shortly to signify service "readiness", a concept
used in other PID 1, like systemd and s6.
For details, see issue #299.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In Finit a daemon can signal its readiness by creating/touching its PID
file. An ancient UNIX concept -- a daemon creates its PID file when it
has set up signal handlers and is ready to receive IPC (signals), right
before entering its while(1) loop.
Finit took the concept a bit further, adding readiness signalling also
to daemon's by touching their PID file after having processed a SIGHUP.
For both these conditions Finit now supports a ready:script, called when
readiness is detected. In later commits support for s6 and systemd
style readiness notification will be added that will hook the mechanism
implemented in this commit as well.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This support API is for running things like pre:script, post:script and
the upcoming ready:script for services. A ready:script will be called
when a service notifies Finit of its readyness.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Service/task/run are today identified by name:id this means the path to
a command is not necessarily the basis for the identity. Hence, an
svc_t can now be updated with new the correct path to a command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As a real life example, this can be useful for a mfgtest mode for the
device, wherein the bootloader can be set to finit.cond=test_mode or
finit.cond=user_mode and then specific services can start up in test
mode which wouldn't normally start.
Or even custom firmware update mode such as finit.cond=fw_update_mode
which performs some specific firmware update steps and doesn't launch
normal processes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is a follow-up to #274, in which Andy pointed out that ending up in
state 'stopped' was a bit confusing for manual:yes run/tasks.
With the following change we let all run/tasks end in state 'done', yet
still allow manual:yes ones to transition to 'ready' when the user calls
`initctl start foo`.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The whole point of pre: scripts is that they run just before the actual
run/task/service process, hence they need to be locked behind the same
conditions as the process. Otherwise pre: scripts would be nothing more
than plain tasks.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is a fix to a regression introduced in e51587c. The idea is to
have 'initctl status foo' show all instances of foo, provided there are
more than one. E.g.
root@anarchy:~# initctl -t status foo
0 foo:1 stopped [--234-----] hej knekt
0 foo:2 stopped [--234-----] hej snigel
0 foo:3 stopped [--234-----] hej kalas
And not foobar:
0 foo:1 stopped [--234-----] hej knekt
0 foo:2 stopped [--234-----] hej snigel
0 foo:3 stopped [--234-----] hej kalas
0 foobar stopped [--234-----] hej foobar
If you type an exact match you can drill down like so:
root@anarchy:~# initctl status foo:1
Status : stopped (code=exited, status=0/SUCCESS, manual=yes)
Identity : foo:1
Description : hej knekt
...
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Prior to this change only service stanzas respected the manual:yes
option, now it (should) work on any svc_t type. Not tested on ttys.
The initctl tool has been given an extra manual=yes output for these
types of run/task/service entries, shown only when the manual option
is set.
Example:
root@anarchy:~# initctl status foo.sh
Status : stopped (code=exited, status=0/SUCCESS, manual=yes)
Identity : foo.sh ~~~~~~~~~~~~
Description : Hej foo
Origin : /etc/finit.d/enabled/foo.conf
Environment :
Condition(s):
Command : /root/foo.sh
PID file : none
PID : 0
User : root
Group : root
Uptime : N/A
Starts : 1
Restarts : 0 (0/10)
Runlevels : [--2345----]
Notice also the new `Starts : 1` which is a counter for the number of
starts in the current runlevel. On runlevel change it is reset to 0.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change makes it possible tell the bundled/built-in getty to call
/bin/login with the '-p' flag, to preserve any environment set in the
Finit .conf files.
Issue #286
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Allow filtering of conditions in raw dump, i.e., the possibility to show
only conditions of a certain type. The TYPE argument is not validated
in any way, so any prefix match is allowed, e.g.
initctl cond dump service/s
Shows all conditions for services starting with 's'.
Fixes issue #272
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When adding a new service option recently, I copy-pasted and forgot to
update the length argument to strncasecmp(), so it was time to fix that
once and for all.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change allows endless restarts, similar to `respawn` but honors
`restart_sec`. There is no upper limit on the number of times Finit
tries to restart a crashing service. Same as `restart:-1`
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg